Enhanced thermal dissipation confers photoprotection in top leaves despite systemic regulation from lower leaves in cotton

2021 ◽  
Author(s):  
Haofeng Meng ◽  
Xiaoping Yi ◽  
Chuangdao Jiang ◽  
Wangfeng Zhang ◽  
Wah Soon Chow ◽  
...  
Keyword(s):  
Thermal Dissipation

Light Absorption and Partitioning in Response to Nitrogen in Apple Leaves

HortScience ◽  
1998 ◽  
Vol 33 (3) ◽  
pp. 541a-541
Author(s):  
Lailiang Cheng ◽  
Leslie H. Fuchigami ◽  
Patrick J. Breen
Keyword(s):  
High Light ◽  
Thermal Dissipation ◽  
Photochemical Quenching ◽  
Light Conditions ◽  
Psii Efficiency ◽  
Fluorescence Measurements ◽  
Free Radical Formation ◽  
Highly Correlated ◽  
Non Photochemical Quenching ◽  
Leaf N

Bench-grafted Fuji/M26 apple trees were fertigated with different concentrations of nitrogen by using a modified Hoagland solution for 6 weeks, resulting in a range of leaf N from 1.0 to 4.3 g·m–2. Over this range, leaf absorptance increased curvilinearly from 75% to 92.5%. Under high light conditions (1500 (mol·m–2·s–1), the amount of absorbed light in excess of that required to saturate CO2 assimilation decreased with increasing leaf N. Chlorophyll fluorescence measurements revealed that the maximum photosystem II (PSII) efficiency of dark-adapted leaves was relatively constant over the leaf N range except for a slight drop at the lower end. As leaf N increased, non-photochemical quenching under high light declined and there was a corresponding increase in the efficiency with which the absorbed photons were delivered to open PSII centers. Photochemical quenching coefficient decreased significantly at the lower end of the leaf N range. Actual PSII efficiency increased curvilinearly with increasing leaf N, and was highly correlated with light-saturated CO2 assimilation. The fraction of absorbed light potentially used for free radical formation was estimated to be about 10% regardless of the leaf N status. It was concluded that increased thermal dissipation protected leaves from photo-oxidation as leaf N declined.

scholarly journals Optimization of the composition in a composite material for microelectronics application using the Ising model

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Yoshihiko Imanaka ◽  
Toshihisa Anazawa ◽  
Fumiaki Kumasaka ◽  
Hideyuki Jippo
Keyword(s):  
Thermal Conductivity ◽  
Thermal Expansion ◽  
Ising Model ◽  
Specific Gravity ◽  
Simulated Annealing Algorithm ◽  
Optimization Problems ◽  
Industrial Applications ◽  
Thermal Dissipation ◽  
Materials Informatics ◽  
Combinatorial Optimization Problems

AbstractTailored material is necessary in many industrial applications since material properties directly determine the characteristics of components. However, the conventional trial and error approach is costly and time-consuming. Therefore, materials informatics is expected to overcome these drawbacks. Here, we show a new materials informatics approach applying the Ising model for solving discrete combinatorial optimization problems. In this study, the composition of the composite, aimed at developing a heat sink with three necessary properties: high thermal dissipation, attachability to Si, and a low weight, is optimized. We formulate an energy function equation concerning three objective terms with regard to the thermal conductivity, thermal expansion and specific gravity, with the composition variable and two constrained terms with a quadratic unconstrained binary optimization style equivalent to the Ising model and calculated by a simulated annealing algorithm. The composite properties of the composition selected from ten constituents are verified by the empirical mixture rule of the composite. As a result, an optimized composition with high thermal conductivity, thermal expansion close to that of Si, and a low specific gravity is acquired.

Fluorescence as a tool in photosynthesis research: application in studies of photoinhibition, cold acclimation and freezing stress

1989 ◽  
Vol 323 (1216) ◽  
pp. 281-293 ◽  
Keyword(s):  
Quantum Yield ◽  
Cold Acclimation ◽  
Spinacia Oleracea ◽  
Photosynthetic Apparatus ◽  
Fluorescence Induction ◽  
High Light ◽  
Thermal Dissipation ◽  
Freezing Stress ◽  
Chlorophyll Fluorescence Induction ◽  
Freezing And Thawing

Chlorophyll fluorescence induction (at 20 °C and 77 K) and quenching were analysed in relation to effects of environmental stresses imposed by chilling in high light and by freezing and thawing of spinach ( Spinacia oleracea L.) leaves. The data indicate that cold acclimation of spinach plants, which leads to increased frost tolerance of the leaves, results in decreased susceptibility to photoinhibition of photosynthesis at chilling temperatures. When plants acclimated to 18 °C and 260-300 µmol quanta m -2 s -1 were exposed to higher light (550 µmol quanta m -2 s -1 ) at 4 °C, they developed strong photoinhibition, as characterized by decreased quantum yield of O 2 evolution and decreased ratio of variable: maximum fluorescence (F V /F M ) of photosystem II. The decrease in F V /F M resulted from a decline in F V and an increase in F 0 . The F V /F M ratio was lowered to a significantly greater extent when induction was recorded at 20 °C, as compared with 77 K. The effects related to photoinhibition were fully reversible at 18 °C in dim light. Plants that had been cold-acclimated for 10 days exhibited slightly decreased quantum yield and lowered F V /F M ratio. However, they did not show further photoinhibition on exposure to 550 µmol quanta m -2 s -1 at 4 °C. The reversible photoinhibition is discussed as a protective pathway serving for thermal dissipation of excessive light energy. It is hypothesized that such a mechanism prevents destruction of the photosynthetic apparatus, until other means of protection become effective during long-term acclimation to high light. Inhibition of photosynthetic carbon assimilation caused by freezing and thawing of leaves in the dark was closely correlated with inhibition of photochemical fluorescence quenching (q Q ). As a sensitive response of the thylakoid membranes to freezing stress, the energy-dependent quenching, q E , was inhibited. Only more severe impact of freezing caused a significant decline in the F V /F M ratio. It is concluded that measurements of fluorescence induction signals ( F V /F M ratios) provide a sensitive tool with which to investigate photoinhibition, whereas freezing damage to the photosynthetic system can be detected more readily by the quenching coefficients q Q and q E than by F V /F M ratios.

Design Method for Fast Switching Seat Valves for Digital Displacement® Machines

2014 ◽  
Author(s):  
Daniel B. Roemer ◽  
Per Johansen ◽  
Henrik C. Pedersen ◽  
Torben O. Andersen
Keyword(s):  
Pressure Loss ◽  
Design Method ◽  
Thermal Dissipation ◽  
Valve Design ◽  
Stroke Length ◽  
Efficient Operation ◽  
Fast Switching ◽  
Switching Times ◽  
High Bandwidth ◽  
Electro Magnetic

Digital Displacement® (DD) machines are upcoming technology where the displacement of each pressure chamber is controlled electronically by use of two fast switching seat valves. The effective displacement and operation type (pumping/motoring) may be controlled by manipulating the seat valves corresponding to the piston movement, which has been shown to facilitate superior part load efficiency combined with high bandwidth compared to traditional displacement machines. However, DD machines need fast switching on-off valves with low pressure loss for efficient operation, especially in fast rotating operation, where switching times must be performed within a few milliseconds. These valve requirements make a simulation based design approach essential, where mechanical strength, thermal dissipation, fluid dynamics and electro-magnetic dynamics must be taken into account. In this paper a complete design method for DD seat valves are presented, taking into account the significant aspects related to obtaining efficient DD valves with basis in a given DD machine specifications. The seat area is minimized and the stroke length is minimized to obtain fast switching times while considering the pressure loss of the valves. A coupled optimization is finally conducted to optimize the electro-magnetic actuator, leading to a valve design based on the chosen valve topology. The design method is applied to an example DD machine and the resulting valve design fulfilling the requirements is presented.

A Numerical Analysis of Gas Turbine Disks Incorporating Rotating Heat Pipes

2000 ◽  
Author(s):  
Y. Cao ◽  
J. Ling ◽  
R. Rivir ◽  
C. MacArthur
Keyword(s):  
Heat Pipe ◽  
Gas Turbine ◽  
Heat Pipes ◽  
High Heat ◽  
Thermal Dissipation ◽  
High Heat Flux ◽  
Heating And Cooling ◽  
Turbine Disks ◽  
Higher Temperature ◽  
Lower Temperature

Abstract Radially rotating heat pipes have been proposed for cooling gas turbine disks working at high temperatures. A disk incorporating the heat pipe would have an enhanced thermal dissipation capacity and a much lower temperature at the disk rim and dovetail surface. In this paper, extensive numerical simulations have been made for heat-pipe-cooled disks. Thermal performances are compared for the disks with and without incorporating the heat pipe at different heating and cooling conditions. The numerical results presented in this paper indicate that radially rotating heat pipes can significantly reduce the maximum and average temperatures at the disk rim and dovetail surface under a high heat flux working condition. In general, the maximum and average temperatures at the disk rim and dovetail surface could be reduced by above 250 and 150 degrees, respectively, compared to those of the disk without the heat pipe. As a result, a disk incorporating radially rotating heat pipes could alleviate temperature-related problems and allow a gas turbine to work at a much higher temperature.

Thermal Analysis and Thermal Dissipation Design of a 600Watt Type LED Lighting

2021 ◽  
Vol 70 (4) ◽  
pp. 713-718
Author(s):  
Kyoung-Wan Koo ◽  
Jae-Sup Han ◽  
Buhyun Shin ◽  
Youngshik Kim ◽  
Bong-Jo Ryu
Keyword(s):  
Thermal Analysis ◽  
Thermal Dissipation ◽  
Led Lighting
Sign in / Sign up

Export Citation Format

Share Document