scholarly journals Blood flow rate and wall shear stress in seven major cephalic arteries of humans

2019 ◽  
Vol 236 (3) ◽  
pp. 522-530
Author(s):  
Roger S. Seymour ◽  
Qiaohui Hu ◽  
Edward P. Snelling
Keyword(s):  
Blood Flow ◽  
Shear Stress ◽  
Wall Shear Stress ◽  
Flow Rate ◽  
Blood Flow Rate ◽  
Wall Shear

scholarly journals Analysis of Flow Characteristics of the Blood Flowing through an Inclined Tapered Porous Artery with Mild Stenosis under the Influence of an Inclined Magnetic Field

2014 ◽  
Vol 2014 ◽  
pp. 1-9 ◽  
Author(s):  
Neetu Srivastava
Keyword(s):  
Magnetic Field ◽  
Blood Flow ◽  
Shear Stress ◽  
Wall Shear Stress ◽  
Flow Rate ◽  
Flow Characteristics ◽  
Volumetric Flow Rate ◽  
Mhd Equations ◽  
Inclined Magnetic Field ◽  
Wall Shear

Analytical investigation of MHD blood flow in a porous inclined stenotic artery under the influence of the inclined magnetic field has been done. Blood is considered as an electrically conducting Newtonian fluid. The physics of the problem is described by the usual MHD equations along with appropriate boundary conditions. The flow governing equations are finally transformed to nonhomogeneous second-order ordinary differential equations. This model is consistent with the principles of magnetohydrodynamics. Analytical expressions for the velocity profile, volumetric flow rate, wall shear stress, and pressure gradient have been derived. Blood flow characteristics are computed for a specific set of values of the different parameters involved in the model analysis and are presented graphically. Some of the obtained results show that the flow patterns in converging region (ξ<0), diverging region (ξ>0), and nontapered region (ξ=0) are effectively influenced by the presence of magnetic field and change in inclination of artery as well as magnetic field. There is also a significant effect of permeability on the wall shear stress as well as volumetric flow rate.

scholarly journals Mathematical Modelling of Pulsatile Flow of Non-Newtonian Fluid Through a Constricted Artery

2021 ◽  
Vol 8 (3) ◽  
pp. 485-491
Author(s):  
Saktipada Nanda ◽  
Biswadip Basu Mallik ◽  
Samarpan Deb Majumder ◽  
Ramesh Kumar Karthick ◽  
Sagar Suman ◽  
...  
Keyword(s):  
Blood Flow ◽  
Shear Stress ◽  
Wall Shear Stress ◽  
Pressure Gradient ◽  
Power Law ◽  
Flow Rate ◽  
Computational Models ◽  
Research Work ◽  
Flow Parameters ◽  
Wall Shear

The research work explores blood flow into a stenosed artery, or one with abnormal growth within it. At the throats and at the critical height of the stenosis, mathematical and computational models have been developed to calculate the various associated parameters such as flow rate, pressure gradient, impedance, and wall shear stress. Modeling blood as a power law fluid showed the dependency of these quantities on temporal and spatial variables, as well as the frequency of the flow oscillation in time and the key parameters of the flow mechanism. The exponential curve is the geometry of the stenosis studied in this analysis. Analytical expressions for axial velocity, volumetric flow rate, pressure gradient, blood flow resistance, and shear stress have been computed and simulated in ANSYS to generate useful results with respect to variation of flow parameters with power law indices and also for comparison between Newtonian and Non- Newtonian models of blood. Upon investigation, it was found that wall shear stress (WSS) increases with stenosis depth and therefore, plays a crucial role in affecting other flow parameters. At power law index 0.6, the highest shear stress and flow velocity were encountered at approximately 7 Pa and 0.5 m/s respectively.

Inferior vena caval hemodynamics quantified in vivo at rest and during cycling exercise using magnetic resonance imaging

2003 ◽  
Vol 284 (4) ◽  
pp. H1161-H1167 ◽  
Author(s):  
Christopher P. Cheng ◽  
Robert J. Herfkens ◽  
Charles A. Taylor
Keyword(s):  
Magnetic Resonance Imaging ◽  
Blood Flow ◽  
Shear Stress ◽  
Magnetic Resonance ◽  
Wall Shear Stress ◽  
Flow Rate ◽  
Inferior Vena ◽  
Resonance Imaging ◽  
Cycling Exercise ◽  
Wall Shear

Compared with the abdominal aorta, the hemodynamic environment in the inferior vena cava (IVC) is not well described. With the use of cine phase-contrast magnetic resonance imaging (MRI) and a custom MRI-compatible cycle in an open magnet, we quantified mean blood flow rate, wall shear stress, and cross-sectional lumen area in 11 young normal subjects at the supraceliac and infrarenal levels of the aorta and IVC at rest and during dynamic cycling exercise. Similar to the aorta, the IVC experienced significant increases in blood flow and wall shear stress as a result of exercise, with greater increases in the infrarenal level compared with the supraceliac level. At the infrarenal level during resting conditions, the IVC experienced higher mean flow rate than the aorta (1.2 ± 0.5 vs. 0.9 ± 0.4 l/min, P < 0.01) and higher mean wall shear stress than the aorta (2.0 ± 0.6 vs. 1.3 ± 0.6 dyn/cm2, P < 0.005). During exercise, wall shear stress remained higher in the IVC compared with the aorta, although not significantly. It was also observed that, whereas the aorta tapers inferiorly, the IVC tapers superiorly from the infrarenal to the supraceliac location. The hemodynamic and anatomic data of the IVC acquired in this study add to our understanding of the venous circulation and may be useful in a clinical setting.

scholarly journals Analytical Study of Non-Newtonian Reiner–Rivlin Model for Blood flow through Tapered Stenotic Artery

2020 ◽  
Vol 15 (2) ◽  
pp. 295-312
Author(s):  
Nibedita Dash ◽  
Sarita Singh
Keyword(s):  
Blood Flow ◽  
Shear Stress ◽  
Wall Shear Stress ◽  
Constitutive Relation ◽  
Flow Rate ◽  
Axial Velocity ◽  
Numerical Solutions ◽  
Stokes Equations ◽  
Closed Form Solution ◽  
Wall Shear

Stenosis, the abnormal narrowing of artery, significantly affects dynamics of blood flow due to increasing resistance to flow of blood. Velocity of blood flow, arterial pressure distribution, wall shear stress and resistance impedance factors are altered at different degree of stenosis. Prior knowledge of flow parameters such as velocity, flow rate, pressure drop in diseased artery is acknowledged to be crucial for preventive and curative medical intervention. The present paper develops the solution of Navier–Stokes equations for conservation of mass and momentum for axis-symmetric steady state case considering constitutive relation for Reiner–Rivlin fluid. Reiner–Rivlin constitutive relation renders the conservation equations non-linear partial differential equations. Few semi-analytical and numerical solutions are found to be reported in literature but no analytical solution. This has motivated the present research to obtain a closed-form solution considering Reiner–Rivlin constitutive relation. Solution yields an expression for axial velocity, which is utilized to obtain pressure gradient, resistance impedance and wall shear stress by considering volumetric flow rate as initial condition. The effect of viscosity, cross viscosity, flow rate, taper angle of artery and degree of stenosis on axial velocity, resistance impedance and wall shear stress are studied.

Basic study on estimation method of wall shear stress in common carotid artery using blood flow imaging

2020 ◽  
Vol 59 (SK) ◽  
pp. SKKE16 ◽  
Author(s):  
Ryo Nagaoka ◽  
Kazuma Ishikawa ◽  
Michiya Mozumi ◽  
Magnus Cinthio ◽  
Hideyuki Hasegawa
Keyword(s):  
Blood Flow ◽  
Shear Stress ◽  
Carotid Artery ◽  
Wall Shear Stress ◽  
Common Carotid Artery ◽  
Estimation Method ◽  
Flow Imaging ◽  
Basic Study ◽  
Blood Flow Imaging ◽  
Wall Shear

scholarly journals Induction of aneurysmogenic high positive wall shear stress gradient by wide angle at cerebral bifurcations, independent of flow rate

2019 ◽  
Vol 131 (2) ◽  
pp. 442-452 ◽  
Author(s):  
Alexandra Lauric ◽  
James E. Hippelheuser ◽  
Adel M. Malek
Keyword(s):  
Shear Stress ◽  
Wall Shear Stress ◽  
Flow Rate ◽  
Stress Gradient ◽  
Dependent Manner ◽  
Parent Vessel ◽  
Spatial Gradients ◽  
Bifurcation Angle ◽  
Wall Shear ◽  
Dynamics Simulations

OBJECTIVEEndothelium adapts to wall shear stress (WSS) and is functionally sensitive to positive (aneurysmogenic) and negative (protective) spatial WSS gradients (WSSG) in regions of accelerating and decelerating flow, respectively. Positive WSSG causes endothelial migration, apoptosis, and aneurysmal extracellular remodeling. Given the association of wide branching angles with aneurysm presence, the authors evaluated the effect of bifurcation geometry on local apical hemodynamics.METHODSComputational fluid dynamics simulations were performed on parametric bifurcation models with increasing angles having: 1) symmetrical geometry (bifurcation angle 60°–180°), 2) asymmetrical geometry (daughter angles 30°/60° and 30°/90°), and 3) curved parent vessel (bifurcation angles 60°–120°), all at baseline and double flow rate. Time-dependent and time-averaged apical WSS and WSSG were analyzed. Results were validated on patient-derived models.RESULTSNarrow symmetrical bifurcations are characterized by protective negative apical WSSG, with a switch to aneurysmogenic WSSG occurring at angles ≥ 85°. Asymmetrical bifurcations develop positive WSSG on the more obtuse daughter branch. A curved parent vessel leads to positive apical WSSG on the side corresponding to the outer curve. All simulations revealed wider apical area coverage by higher WSS and positive WSSG magnitudes, with increased bifurcation angle and higher flow rate. Flow rate did not affect the angle threshold of 85°, past which positive WSSG occurs. In curved models, high flow displaced the impingement area away from the apex, in a dynamic fashion and in an angle-dependent manner.CONCLUSIONSApical shear forces and spatial gradients are highly dependent on bifurcation and inflow vessel geometry. The development of aneurysmogenic positive WSSG as a function of angular geometry provides a mechanotransductive link for the association of wide bifurcations and aneurysm development. These results suggest therapeutic strategies aimed at altering underlying unfavorable geometry and deciphering the molecular endothelial response to shear gradients in a bid to disrupt the associated aneurysmal degeneration.

Mathematical analysis of two-phase blood flow through a stenosed curved artery with hematocrit and temperature dependent viscosity

2021 ◽  
Author(s):  
Chandan Kumawat ◽  
Bhupendra Kumar Sharma ◽  
Khalid Saad Mekheimer
Keyword(s):  
Blood Flow ◽  
Shear Stress ◽  
Wall Shear Stress ◽  
Mathematical Study ◽  
Temperature Dependent ◽  
Two Phase ◽  
Temperature Dependent Viscosity ◽  
Linear Temperature ◽  
Wall Shear ◽  
Dependent Viscosity

Abstract A two-phase blood flow model is considered to analyze the fluid flow and heat transfer in a curved tube with time-variant stenosis. In both core and plasma regions, the variable viscosity model ( Hematocrit and non linear temperature-dependent, respectively) is considered. A toroidal coordinate system is considered to describe the governing equations. The perturbation technique in terms of perturbation parameter ε is used to obtain the temperature profile of blood flow. In order to find the velocity, wall shear stress and impedance profiles, a second-order finite difference method is employed with the accuracy of 10−6 in the each iteration. Under the conditions of fully-developed flow and mild stenosis, the significance of various physical parameters on the blood velocity, temperature, wall shear stress (WSS) and impedance are investigated with the help of graphs. A validation of our results has been presented and comparison has been made with the previously published work and present study, and it revels the good agreement with published work. The present mathematical study suggested that arterial curvature increase the fear of deposition of plaque (atherosclerosis), while, the use of thermal radiation in heat therapies lowers this risk. The positive add in the value of λ1 causes to increase in plasma viscosity; as a result, blood flow velocity in the stenosed artery decreases due to the assumption of temperature-dependent viscosity of the plasma region. Clinical researchers and biologists can adopt the present mathematical study to lower the risk of lipid deposition, predict cardiovascular disease risk and current state of disease by understanding the symptomatic spectrum, and then diagnose patients based on the risk.

scholarly journals Numerical Simulation of Dispersed Particle-Blood Flow in the Stenosed Coronary Arteries

2018 ◽  
Vol 2018 ◽  
pp. 1-16 ◽  
Author(s):  
Mongkol Kaewbumrung ◽  
Somsak Orankitjaroen ◽  
Pichit Boonkrong ◽  
Buraskorn Nuntadilok ◽  
Benchawan Wiwatanapataphee
Keyword(s):  
Numerical Simulation ◽  
Blood Flow ◽  
Shear Stress ◽  
Coronary Artery ◽  
Pressure Drop ◽  
Wall Shear Stress ◽  
Stokes Equations ◽  
Spherical Shape ◽  
Shear Stresses ◽  
Wall Shear

A mathematical model of dispersed bioparticle-blood flow through the stenosed coronary artery under the pulsatile boundary conditions is proposed. Blood is assumed to be an incompressible non-Newtonian fluid and its flow is considered as turbulence described by the Reynolds-averaged Navier-Stokes equations. Bioparticles are assumed to be spherical shape with the same density as blood, and their translation and rotational motions are governed by Newtonian equations. Impact of particle movement on the blood velocity, the pressure distribution, and the wall shear stress distribution in three different severity degrees of stenosis including 25%, 50%, and 75% are investigated through the numerical simulation using ANSYS 18.2. Increasing degree of stenosis severity results in higher values of the pressure drop and wall shear stresses. The higher level of bioparticle motion directly varies with the pressure drop and wall shear stress. The area of coronary artery with higher density of bioparticles also presents the higher wall shear stress.

Sign in / Sign up

Export Citation Format

Share Document