Singularity Analysis of 3-DOF Planar Parallel Mechanisms via Screw Theory

2003 ◽  
Vol 125 (3) ◽  
pp. 573-581 ◽  
Author(s):  
Ilian A. Bonev ◽  
Dimiter Zlatanov ◽  
Cle´ment M. Gosselin
Keyword(s):  
Screw Theory ◽  
Singularity Analysis ◽  
Point Of View ◽  
Mobile Platform ◽  
Parallel Mechanisms ◽  
Singular Configurations ◽  
Revolute Joints ◽  
Singular Configuration

This paper presents the results of a detailed study of the singular configurations of 3-DOF planar parallel mechanisms with three identical legs. Only prismatic and revolute joints are considered. From the point of view of singularity analysis, there are ten different architectures. All of them are examined in a compact and systematic manner using planar screw theory. The nature of each possible singular configuration is discussed and the singularity loci for a constant orientation of the mobile platform are obtained. For some architectures, simplified designs with easy to determine singularities are identified.

Singularity Analysis of Large Workspace 3RRRS Parallel Mechanism Using Line Geometry and Linear Complex Approximation

2010 ◽  
Vol 3 (1) ◽  
Author(s):  
Alon Wolf ◽  
Daniel Glozman
Keyword(s):  
Parallel Mechanism ◽  
Degrees Of Freedom ◽  
Screw Theory ◽  
Singularity Analysis ◽  
Community Research ◽  
Parallel Mechanisms ◽  
Line Geometry ◽  
Equilibrium Equations ◽  
Six Degrees Of Freedom ◽  
Singular Configurations

During the last 15 years, parallel mechanisms (robots) have become more and more popular among the robotics and mechanism community. Research done in this field revealed the significant advantage of these mechanisms for several specific tasks, such as those that require high rigidity, low inertia of the mechanism, and/or high accuracy. Consequently, parallel mechanisms have been widely investigated in the last few years. There are tens of proposed structures for parallel mechanisms, with some capable of six degrees of freedom and some less (normally three degrees of freedom). One of the major drawbacks of parallel mechanisms is their relatively limited workspace and their behavior near or at singular configurations. In this paper, we analyze the kinematics of a new architecture for a six degrees of freedom parallel mechanism composed of three identical kinematic limbs: revolute-revolute-revolute-spherical. We solve the inverse and show the forward kinematics of the mechanism and then use the screw theory to develop the Jacobian matrix of the manipulator. We demonstrate how to use screw and line geometry tools for the singularity analysis of the mechanism. Both Jacobian matrices developed by using screw theory and static equilibrium equations are similar. Forward and inverse kinematic solutions are given and solved, and the singularity map of the mechanism was generated. We then demonstrate and analyze three representative singular configurations of the mechanism. Finally, we generate the singularity-free workspace of the mechanism.

Singularity Analysis of Serial Robot-Manipulators

1996 ◽  
Vol 118 (4) ◽  
pp. 520-525 ◽  
Author(s):  
A. Karger
Keyword(s):  
Degrees Of Freedom ◽  
Robot Manipulator ◽  
Robot Manipulators ◽  
Singularity Analysis ◽  
Singular Set ◽  
Singular Configurations ◽  
Special Cases ◽  
Serial Robot ◽  
Singular Configuration ◽  
Actual Configuration

This paper is devoted to the description of the set of all singular configurations of serial robot-manipulators. For 6 degrees of freedom serial robot-manipulators we have developed a theory which allows to describe higher order singularities. By using Lie algebra properties of the screw space we give an algorithm, which determines the degree of a singularity from the knowledge of the actual configuration of axes of the robot-manipulator only. The local shape of the singular set in a neighbourhood of a singular configuration can be determined as well. We also solve the problem of escapement from a singular configuration. For serial robot-manipulators with the number of degrees of freedom different from six we show that up to certain exceptions singular configurations can be avoided by a small change of the motion of the end-effector. We also give an algorithm which allows to determine equations of the singular set for any serial robot-manipulator. We discuss some special cases and give examples of singular sets including PUMA 560.

A geometric approach for singularity analysis of 3-DOF planar parallel manipulators using Grassmann–Cayley algebra

Robotica ◽  
2015 ◽  
Vol 35 (3) ◽  
pp. 511-520 ◽  
Author(s):  
Kefei Wen ◽  
TaeWon Seo ◽  
Jeh Won Lee
Keyword(s):  
Jacobian Matrix ◽  
Screw Theory ◽  
Geometric Approach ◽  
Parallel Manipulators ◽  
Singularity Analysis ◽  
Singular Configurations ◽  
Cayley Algebra ◽  
Grassmann Cayley Algebra ◽  
Planar Parallel Manipulators

SUMMARYSingular configurations of parallel manipulators (PMs) are special poses in which the manipulators cannot maintain their inherent infinite rigidity. These configurations are very important because they prevent the manipulator from being controlled properly, or the manipulator could be damaged. A geometric approach is introduced to identify singular conditions of planar parallel manipulators (PPMs) in this paper. The approach is based on screw theory, Grassmann–Cayley Algebra (GCA), and the static Jacobian matrix. The static Jacobian can be obtained more easily than the kinematic ones in PPMs. The Jacobian is expressed and analyzed by the join and meet operations of GCA. The singular configurations can be divided into three classes. This approach is applied to ten types of common PPMs consisting of three identical legs with one actuated joint and two passive joints.

Singularity Analysis of a Novel 4-DOFs Parallel Robot H4 by Using Screw Theory

2003 ◽  
Author(s):  
Hee-Byoung Choi ◽  
Atsushi Konno ◽  
Masaru Uchiyama
Keyword(s):  
Closed Loop ◽  
Jacobian Matrix ◽  
Screw Theory ◽  
Parallel Robot ◽  
Singularity Analysis ◽  
Loop Structure ◽  
Singular Configurations ◽  
Planning And Control ◽  
Kinematic Singularities ◽  
And Control

The closed-loop structure of a parallel robot results in complex kinematic singularities in the workspace. Singularity analysis become important in design, motion, planning, and control of parallel robot. The traditional method to determine a singular configurations is to find the determinant of the Jacobian matrix. However, the Jacobian matrix of a parallel manipulator is complex in general, and thus it is not easy to find the determinant of the Jacobian matrix. In this paper, we focus on the singularity analysis of a novel 4-DOFs parallel robot H4 based on screw theory. Two types singularities, i.e., the forward and inverse singularities, have been identified.

scholarly journals Regularization of the Spatial Inverse Positioning Problem of Revolute Joint Manipulators

2017 ◽  
Vol 61 (3) ◽  
pp. 279
Author(s):  
Dániel András Drexler
Keyword(s):  
Inverse Kinematics ◽  
Closed Loop ◽  
Singular Values ◽  
Singular Configurations ◽  
Revolute Joints ◽  
Singular Direction ◽  
Inverse Kinematics Problem ◽  
Singular Configuration ◽  
Damped Least Squares ◽  
Kinematic Singularities

Inverse kinematics is a central problem in robotics, and its solution is burdened with kinematic singularities, i.e. the task Jacobian of the problem is singular. A subproblem of the general inverse kinematics problem, the inverse positioning problem is considered for spatial manipulators consisting of revolute joints, and a regularization method is proposed that results in a regular task Jacobian in singular configurations as well, provided that the manipulator’s geometry makes movement in singular directions possible. The conditions of regularizability are investigated, and bounds on the singular values of the regularized task Jacobian are given that can be used to create stable closed-loop inverse kinematics algorithms. The proposed method is demonstrated on the inverse positioning problem of an elbow manipulator and compared to the Damped Least Squares and the Levenberg-Marquardt methods, and it is shown that only the proposed method can leave the singular configuration in the singular direction.

scholarly journals Generalized Singularity Analysis of Snake-Like Robot

2018 ◽  
Vol 8 (10) ◽  
pp. 1873 ◽  
Author(s):  
Shunsuke Nansai ◽  
Masami Iwase ◽  
Hiroshi Itoh
Keyword(s):  
Singularity Analysis ◽  
Common Point ◽  
Analysis Method ◽  
Link Length ◽  
New Model ◽  
Singular Configurations ◽  
Singular Configuration ◽  
The One

The purpose of this paper is to elucidate a generalized singularity analysis of a snake-like robot. The generalized analysis is denoted as analysis of singularity of a model which defines all designable parameters such as the link length and/or the position of the passive wheel as arbitrary variables. The denotation is a key point for a novelty of this study. This paper addresses the above new model denotation, while previous studies have defined the designable parameters as unique one. This difference makes the singularity analysis difficult substantively. To overcome this issue, an analysis method using redundancy of the snake-like robot is proposed. The proposed method contributes to simplify singularity analysis concerned with the designable parameters. The singular configurations of both the model including side-slipping and the one with non side-slipping are analyzed. As the results of the analysis, we show two contributions. The first contribution is that a singular configuration depends on designable parameters such as link length as well as state values such as relative angles. The second contribution is that the singular configuration is characterized by the axials of the passive wheels of all non side-slipping link. This paper proves that the singular configuration is identified as following two conditions even if the designable parameters are chosen as different variables and the model includes side-slipping link. One is that the axials of passive wheels of all non side-slipping links intersect at a common point. Another one is that axials of passive wheels of all non side-slipping links are parallel.

scholarly journals Optimal Design and Singularity Analysis of a Spatial Parallel Manipulator

Symmetry ◽  
2019 ◽  
Vol 11 (4) ◽  
pp. 551 ◽  
Author(s):  
Xiaoyong Wu
Keyword(s):  
Optimal Design ◽  
Mechanism Design ◽  
Parallel Manipulator ◽  
Screw Theory ◽  
Kinematic Model ◽  
Singularity Analysis ◽  
Singular Configurations ◽  
Simulation Results ◽  
Optimal Configurations

Optimal design and singularity analysis are two important aspects of mechanism design, and they are discussed within a spatial parallel manipulator in this work. Resorting to matrix transformation, the parametric kinematic model is established, upon which the inverse position and Jacobian are analyzed. As for optimal design, dexterity and payload indices are taken into consideration. From the simulation results, two optimal configurations are obtained, namely, the star-shaped one and the T-shaped one, and they respectively own the best payload performance and the best dexterity performance. Moreover, the concept of shape singularity is introduced and generalized, which is a special type of singularity that will lead to the singularity in all configurations. The shape singularity of the proposed manipulator is indicated by dexterity index and identified by screw theory. A case study is presented to demonstrate the implication of the shape singularity. Both optimal and singular configurations are useful, and new devices can thus be envisaged for this type of application.

Combinatorial Method for Characterizing Singular Configurations in Parallel Mechanisms

2015 ◽  
Author(s):  
Avshalom Sheffer ◽  
Offer Shai
Keyword(s):  
Singularity Analysis ◽  
Parallel Mechanisms ◽  
Line Geometry ◽  
Combinatorial Method ◽  
Combinatorial Characterization ◽  
Singular Configurations ◽  
Grassmann Line Geometry ◽  
2D And 3D ◽  
Grassmann Cayley Algebra

The paper presents a method for finding the different singular configurations of several types of parallel mechanisms/robots using the combinatorial method. The main topics of the combinatorial method being used are: equimomental line/screw, self-stresses, Dual Kennedy theorem and circle, and various types of 2D and 3D Assur Graphs such as: triad, tetrad and double triad. The paper introduces combinatorial characterization of 3/6 SP and compares it to singularity analysis of 3/6 SP using Grassmann Line Geometry and Grassmann-Cayley Algebra. Finally, the proposed method is applied for characterizing the singular configurations of more complex parallel mechanisms such as 3D tetrad and 3D double-triad.

scholarly journals Screw Theory Based Singularity Analysis of Lower-Mobility Parallel Robots considering the Motion/Force Transmissibility and Constrainability

2015 ◽  
Vol 2015 ◽  
pp. 1-11 ◽  
Author(s):  
Xiang Chen ◽  
Xin-Jun Liu ◽  
Fugui Xie
Keyword(s):  
Screw Theory ◽  
Mathematical Problem ◽  
Engineering Application ◽  
Singularity Analysis ◽  
Parallel Robots ◽  
Parallel Mechanisms ◽  
Input And Output ◽  
Lower Mobility ◽  
Force Transmissibility ◽  
Output Constraint

Singularity is an inherent characteristic of parallel robots and is also a typical mathematical problem in engineering application. In general, to identify singularity configuration, the singular solution in mathematics should be derived. This work introduces an alternative approach to the singularity identification of lower-mobility parallel robots considering the motion/force transmissibility and constrainability. The theory of screws is used as the mathematic tool to define the transmission and constraint indices of parallel robots. The singularity is hereby classified into four types concerning both input and output members of a parallel robot, that is, input transmission singularity, output transmission singularity, input constraint singularity, and output constraint singularity. Furthermore, we take several typical parallel robots as examples to illustrate the process of singularity analysis. Particularly, the input and output constraint singularities which are firstly proposed in this work are depicted in detail. The results demonstrate that the method can not only identify all possible singular configurations, but also explain their physical meanings. Therefore, the proposed approach is proved to be comprehensible and effective in solving singularity problems in parallel mechanisms.

Singularity Analysis of 5-RPRRR Parallel Mechanisms via Grassmann Line Geometry

2009 ◽  
Author(s):  
Mehdi Tale Masouleh ◽  
Cle´ment Gosselin
Keyword(s):  
Jacobian Matrix ◽  
Singularity Analysis ◽  
Degree Of Freedom ◽  
General Mechanism ◽  
Parallel Mechanisms ◽  
Type Synthesis ◽  
Line Geometry ◽  
Singular Configurations ◽  
Highly Nonlinear ◽  
Grassmann Line Geometry

This paper investigates the singular configurations of five-degree-of-freedom parallel mechanisms generating the 3T2R motion and comprising five identical legs of the RPUR type. The general mechanism was recently revealed by performing the type synthesis for symmetrical 5-DOF parallel mechanisms. In this study, some simplified designs are proposed for which the singular configurations can be predicted by means of the so-called Grassmann line geometry. This technique can be regarded as a powerful tool for analyzing the degeneration of the Plu¨cker screw set. The main focus of this contribution is to predict the actuation singularity, for a general and simplified design, without expanding the determinant of the inverse Jacobian matrix (actuated constraints system) which is highly nonlinear and difficult to analyze.

Sign in / Sign up

Export Citation Format

Share Document