Acoustic Design of Lightweight Gas Turbine Enclosures

1991 ◽  
Vol 113 (4) ◽  
pp. 544-549 ◽  
Author(s):  
R. D. Rawlinson
Keyword(s):  
Gas Turbine ◽  
Structural Strength ◽  
Cost Effective ◽  
Sound Insulation ◽  
Flat Panel ◽  
Safety Requirements ◽  
Acoustic Design ◽  
Design Requirements ◽  
Acoustic Enclosures ◽  
Careful Design

Acoustic enclosures for the gas turbine industry have to comply with a number of stringent safety requirements including structural strength, fire resistance, and sound insulation. This has led traditionally to heavy enclosure designs. Corrugated enclosure panels offer significant structural advantages because of their increased bending stiffness. Consequently, a corrugated panel of a given thickness can give the same structural strength as a flat panel of substantially greater weight and thickness. However, corrugated panels are intrinsically less effective as a sound insulator than flat panels of the same thickness. This paper examines the implications of corrugated, lightweight panels for acoustic enclosures. It illustrated that, by careful design, the inherent acoustical disadvantages of corrugated panels can be overcome so that thinner, lighter, and more cost-effective enclosures can be used without compromising the overall structural and acoustical design requirements.

scholarly journals Acoustic Design of Lightweight Gas Turbine Enclosures

1990 ◽  
Author(s):  
R. D. Rawlinson
Keyword(s):  
Gas Turbine ◽  
Structural Strength ◽  
Cost Effective ◽  
Sound Insulation ◽  
Flat Panel ◽  
Safety Requirements ◽  
Acoustic Design ◽  
Design Requirements ◽  
Acoustic Enclosures ◽  
Careful Design

Acoustic enclosures for the gas turbine industry have to comply with a number of stringent safety requirements including structural strength, fire resistance and sound insulation. This has led traditionally to heavy enclosure designs. Corrugated enclosure panels offer significant structural advantages because of their increased bending stiffness. Consequently, a corrugated panel of a given thickness can give the same structural strength as a flat panel of substantially greater weight and thickness. But corrugated panels are intrinsically less effective as a sound insulator than flat panels of the same thickness. This paper examines the implications of corrugated, lightweight panels for acoustic enclosures. It illustrated that, by careful design, the inherent acoustical disadvantages of corrugated panels can be overcome so that thinner, lighter and more cost-effective enclosures can be used without compromising the overall structural and acoustical design requirements.

User Interface Design for Maintenance/Troubleshooting Expert System

1985 ◽  
Vol 29 (4) ◽  
pp. 367-371
Author(s):  
Christopher G. Koch
Keyword(s):  
User Interface ◽  
Expert System ◽  
Expert Systems ◽  
Gas Turbine ◽  
Interface Design ◽  
Special Function ◽  
Input Output ◽  
Flat Panel ◽  
Voice Input ◽  
Control Functions

Expert systems applications for special environments impose special requirements on the user-system interface. A study was conducted to determine requirements and define a design concept for the interface for an expert system being developed to support corrective maintenance and troubleshooting of gas turbine electronic equipment and controls. The resulting design specifies a portable unit containing color flat panel video/graphics display, special function membrane keypad, miniature printer, and headset with voice input/output. Communication with the expert system is structured by multiple-window information presentation and voice-activated control functions.

A Web-Based Process/Material Advisory System

2000 ◽  
Author(s):  
Yusheng Chen ◽  
Satyandra K. Gupta ◽  
Shaw Feng
Keyword(s):  
Conceptual Design ◽  
Cost Effective ◽  
Design Stage ◽  
Material Combination ◽  
Web Based ◽  
Advisory System ◽  
Conceptual Design Stage ◽  
Design Requirements ◽  
Parameter Ranges ◽  
Process Material

Abstract This paper describes a web-based process/material advisory system that can be used during conceptual design. Given a set of design requirements for a part during conceptual design stage, our system produces process sequences that can meet the design requirements. Quite often during conceptual design stage, design requirements are not precisely defined. Therefore, we allow users to describe design requirements in terms of parameter ranges. Parameter ranges are used to capture uncertainties in design requirements. Our system accounts for uncertainties in design requirements in generating and evaluating process/material combinations. Our system uses a two step algorithm. During the first step, we generate a material/process option tree. This tree represents various process/material options that can be used to meet the given set of design requirements. During the second step, we evaluate various alternative process/material options using a depth first branch and bound algorithm to identify and recommend the least expensive process/material combination to the designer. Our system can be accessed on the World Wide Web using a standard browser. Our system allows designs to consider a wide variety of process/material options during the conceptual design stage and allows them to find the most cost-effective combination. By selecting the process/material combination during the early design stages, designers can ensure that the detailed design is compatible with all of the process constraints for the selected process.

scholarly journals AN INTEGRATED DESIGN METHODOLOGY

2011 ◽  
Author(s):  
T. Freiheit ◽  
S. S. Park ◽  
V Giuliani
Keyword(s):  
Design Methodology ◽  
Integrated Design ◽  
Cost Effective ◽  
Global Markets ◽  
Design Tools ◽  
Regulatory Requirements ◽  
Life Cycle Design ◽  
Design Requirements ◽  
Stakeholder Needs ◽  
Integrated Design Methodology

Global markets demand quick product develop-ment that is simultaneously cost-effective and meets stakeholder needs. Many tools and design methodolo-gies have been developed that address individual as-pects of the design problem, such as Axiomatic De-sign, Design for Manufacture, Life Cycle Design, etc. However, competitive viability can be put at risk when a product fails to achieve all customer, business, manufacturing, and regulatory requirements. To de-liver all design requirements, an efficient integrated design methodology is required. This paper proposes a design approach which integrates previously devel-oped design tools to economically achieve essential design objectives, within a framework that facilitates a rapid design process.

scholarly journals Fugitive Methane Emission Reduction Using Gas Turbines

1998 ◽  
Author(s):  
Todd Parker
Keyword(s):  
Gas Turbine ◽  
Gas Turbines ◽  
Cost Effective ◽  
Process Gas ◽  
Natural Gas Transmission ◽  
Air Intake ◽  
Lean Fuel ◽  
Gas Seals ◽  
Turbo Compressor ◽  
Many Sources

Natural gas transmission systems have many sources of fugitive methane emissions that have been difficult to eliminate. This paper discusses an option for dealing with one such source for operations using turbo-compressor units fitted with dry gas seals. Dry seals rely on a small leakage of process gas to maintain the differential pressure of the process against the atmosphere. The seal leakage ultimately results in waste gas that is emitted to the atmosphere through the primary vent. A simple, cost effective, emission disposal mechanism for this application is to vent the seal gas into the gas turbine’s air intake. Explosion hazards are not created by the resultant ultra-lean fuel/air mixture, and once this mixture reaches the combustion chamber, where sufficient fuel is added to create a flammable mixture, significant oxidation of the seal vent gas is realized. Background of the relevant processes is discussed as well as a review of field test data. Similar applications have been reported [1] for the more generalized purpose of Volatile Organic Compound (VOC) destruction using specialized gas turbine combustor designs. As described herein, existing production gas turbine combustors are quite effective at fugitive methane destruction without specialized combustor designs.

An Integrated SWARA, QFD, and ISM Approach for Agricultural Injuries in India

2020 ◽  
Vol 12 (2) ◽  
pp. 1-24
Author(s):  
Debesh Mishra ◽  
Suchismita Satapathy
Keyword(s):  
Factor Analysis ◽  
Age Group ◽  
Hand Tools ◽  
Interpretive Structural Modeling ◽  
Male And Female ◽  
Frame Design ◽  
Safety Requirements ◽  
Agricultural Injuries ◽  
Female Farmers ◽  
Design Requirements

A survey was carried out to study and collect data about the agricultural farmer injuries of Odisha in India. Five villages with major population with farming as occupation were selected. A total of 145 farmers were selected for the study. It was found that, the number of accidents by hand tools such as spades, plain edge sickles, serrated sickles, and shovels were 13 (16.45%), 6 (7.59%), 11 (13.92%), and 7 (8.86%), respectively. Also, it was observed that maximum number of male and female farmers who were victims of agricultural injury were in the age group of 31 to 45. A smaller number of injured farmers were found in the age group of 18 to 30. Factor analysis followed by the SWARA method was used to rank the important variables which were found as the causes for agricultural accidents or injuries by the responses obtained through questionnaires. Finally, QFD & Interpretive Structural Modeling (ISM) and MICMAC analysis was performed, to frame design requirements in the form of safety requirements.

scholarly journals Reducing the harmful effects of noise on the human environment. Sound insulation of industrial skeleton enclosures in the 10–40 kHz frequency range

2020 ◽  
Vol 18 (2) ◽  
pp. 1451-1463
Author(s):  
Witold Mikulski
Keyword(s):  
Sound Pressure Level ◽  
Sound Pressure ◽  
Sheet Steel ◽  
Pressure Level ◽  
Sound Insulation ◽  
Frequency Range ◽  
Noise Sources ◽  
Human Environment ◽  
Absorbing Material ◽  
Acoustic Enclosures

Abstract Purpose The purpose of the research is to work out a method for determining the sound insulation of acoustic enclosures for industrial sources emitting noise in the frequency range of 10–40 kHz and apply the method to measure the sound insulation of acoustic enclosures build of different materials. Methods The method is developed by appropriate adaptation of techniques applicable currently for sound frequencies of up to 10 kHz. The sound insulation of example enclosures is determined with the use of this newly developed method. Results The research results indicate that enclosures (made of polycarbonate, plexiglass, sheet aluminium, sheet steel, plywood, and composite materials) enable reducing the sound pressure level in the environment for the frequency of 10 kHz by 19–25 dB with the reduction increasing to 40–48 dB for the frequency of 40 Hz. The sound insulation of acoustic enclosures with a sound-absorbing material inside reaches about 38 dB for the frequency of 10 kHz and about 63 dB for the frequency of 40 kHz. Conclusion Some pieces of equipment installed in the work environment are sources of noise emitted in the 10–40 kHz frequency range with the intensity which can be high enough to be harmful to humans. The most effective technical reduction of the associated risks are acoustic enclosures for such noise sources. The sound pressure level reduction obtained after provision of an enclosure depends on its design (shape, size, material, and thickness of walls) and the noise source frequency spectrum. Realistically available noise reduction values may exceed 60 dB.

scholarly journals Thermal Management Systems for Civil Aircraft Engines: Review, Challenges and Exploring the Future

2018 ◽  
Vol 8 (11) ◽  
pp. 2044 ◽  
Author(s):  
Soheil Jafari ◽  
Theoklis Nikolaidis
Keyword(s):  
Gas Turbine ◽  
Thermal Management ◽  
Cost Effective ◽  
Alternative Methods ◽  
Management Systems ◽  
Engine Efficiency ◽  
Future Challenges ◽  
Aero Engines ◽  
Historical Coverage ◽  
Electrical Components

This paper examines and analytically reviews the thermal management systems proposed over the past six decades for gas turbine civil aero engines. The objective is to establish the evident system shortcomings and to identify the remaining research questions that need to be addressed to enable this important technology to be adopted by next generation of aero engines with complicated designs. Future gas turbine aero engines will be more efficient, compact and will have more electric parts. As a result, more heat will be generated by the different electrical components and avionics. Consequently, alternative methods should be used to dissipate this extra heat as the current thermal management systems are already working on their limits. For this purpose, different structures and ideas in this field are stated in terms of considering engines architecture, the improved engine efficiency, the reduced emission level and the improved fuel economy. This is followed by a historical coverage of the proposed concepts dating back to 1958. Possible thermal management systems development concepts are then classified into four distinct classes: classic, centralized, revolutionary and cost-effective; and critically reviewed from challenges and implementation considerations points of view. Based on this analysis, the potential solutions for dealing with future challenges are proposed including combination of centralized and revolutionary developments and combination of classic and cost-effective developments. The effectiveness of the proposed solutions is also discussed with a complexity-impact correlation analysis.

Development of a Case Vibration Measurement System for the DC-990 Gas Turbine

1984 ◽  
Vol 106 (4) ◽  
pp. 935-939
Author(s):  
H. A. Kidd
Keyword(s):  
Gas Turbine ◽  
Gas Turbines ◽  
Cost Effective ◽  
Industrial Applications ◽  
Vibration Monitoring ◽  
Vibration Measurement ◽  
Monitoring Systems ◽  
Development Programs ◽  
Field Service ◽  
Service Staff

The continued use of gas turbines in industrial applications and increased customer desires for trend analysis has led gas turbine suppliers to develop sophisticated, reliable, cost-effective vibration monitoring systems. This paper discusses the application of case vibration monitoring systems and the design criteria for each component. Engine installation, transducer mounting brackets, types of transducers, interconnecting cables and connectors, charge amplifiers, and signal conditioning and monitoring are considered. Examples are given of the benefits experienced with the final system in several of Dresser Clark’s engine development programs, by manufacturing and production testing, and by Dresser’s field service staff.

Applications of Sound Intensity Measurements to Gas Turbine Engineering

1992 ◽  
Author(s):  
R. D. Rawlinson
Keyword(s):  
Gas Turbine ◽  
Sound Intensity ◽  
Cost Effective ◽  
Sound Level ◽  
Directional Sensitivity ◽  
Noise Sources ◽  
Offshore Installations ◽  
Practical Reality ◽  
Detailed Assessment ◽  
Level Meter

Recent advances in signal processing techniques have made the measurement of sound intensity a practical reality. The newly developed sound intensity meters can indicate both the magnitude and direction of sound. This is a major advantage over the traditional sound level meter which does not have such directional sensitivity. Sound intensity meters can, therefore, make accurate measurements under adverse conditions, such as onshore or offshore, where sound level meters may be unsuitable. This makes the detailed assessment of the sound power output of a gas turbine package, operating in the field, practicable. Individual components of a gas turbine train can be evaluated so that the dominant noise sources can be identified, thereby providing more cost effective solutions to onshore and offshore installations. This paper describes briefly the concepts of sound intensity, the current state of standards and some aspects of measurement technique. Case histories of the use of sound intensity instrumentation in a variety of situations, relevant to gas turbine engineering, will be described. This will include laboratory and field based investigations.

Sign in / Sign up

Export Citation Format

Share Document