Thermal Elastohydrodynamic Lubrication of Rider Rings

1984 ◽  
Vol 106 (4) ◽  
pp. 492-498 ◽  
Author(s):  
Vilmos Simon
Keyword(s):  
Film Thickness ◽  
Numerical Solution ◽  
Temperature Variation ◽  
Elastohydrodynamic Lubrication ◽  
Operating Conditions ◽  
Performance Characteristics ◽  
Oil Film ◽  
The Real ◽  
Ring Geometry

The full thermal elastohydrodynamic analysis of the lubrication of rider rings is presented. A numerical solution of the coupled Reynolds, elasticity, energy, and Laplace’s equations for the oil film thickness, pressure, and temperature and rider rings temperatures is obtained. The temperature variation across the oil film is included. The real rider ring geometry is treated. The effect of the operating conditions on the performance characteristics is discussed.

Elastohydrodynamic Lubrication of Hypoid Gears

1981 ◽  
Vol 103 (1) ◽  
pp. 195-203 ◽  
Author(s):  
V. Simon
Keyword(s):  
Film Thickness ◽  
Numerical Solution ◽  
Elastohydrodynamic Lubrication ◽  
Operating Conditions ◽  
Performance Characteristics ◽  
Temperature Variations ◽  
Hypoid Gears ◽  
Oil Film ◽  
Gear Teeth ◽  
Energy Equations

The full thermal elastohydrodynamic analysis of the lubrication of hypoid gears is presented. A numerical solution of the coupled Reynolds, elasticity and energy equations for the pressure, temperature and film thickness is obtained. The temperature variations across the oil film and in the pinion and gear teeth are included. The real tooth geometry of the modified hypoid gears is treated. The effect of the operating conditions on the performance characteristics is discussed.

Steady State Performance Characteristics of a Tilting Pad Thrust Bearing

2000 ◽  
Vol 123 (3) ◽  
pp. 608-615 ◽  
Author(s):  
Sergei B. Glavatskikh
Keyword(s):  
Steady State ◽  
Film Thickness ◽  
Thrust Bearing ◽  
Operating Conditions ◽  
Performance Characteristics ◽  
Shaft Speed ◽  
Oil Film ◽  
Tilting Pad ◽  
Bearing Load ◽  
Steady State Performance

The paper reports results of the experimental investigation into the steady state performance characteristics of a tilting pad thrust bearing typical of design in general use. Simultaneous measurements are taken of the pad and collar temperatures, the pressure distributions, oil film thickness, and power loss as a function of shaft speed, bearing load, and supplied oil temperature. The effect of operating conditions on bearing performance is discussed. A small radial temperature variation is observed in the collar. A reduction in minimum oil film thickness with load is approximately proportional to p−0.6, where p is an average bearing pressure. It has also been found that the oil film pressure profiles change not only due to the average bearing load but also with an increase in shaft speed and temperature of the supplied oil.

Wildhaber-Novikov Circular Arc Gears: Elastohydrodynamics

1993 ◽  
Vol 115 (3) ◽  
pp. 487-492 ◽  
Author(s):  
H. P. Evans ◽  
R. W. Snidle
Keyword(s):  
Film Thickness ◽  
Elastic Deformation ◽  
Elastohydrodynamic Lubrication ◽  
Major Axis ◽  
Operating Conditions ◽  
Circular Arc ◽  
Rolling Velocity ◽  
Oil Film ◽  
Practical Design ◽  
Thinning Effect

The paper describes an elastohydrodynamic lubrication (EHL) analysis of heavily loaded contacts between the teeth of Wildhaber-Novikov (W-N) circular arc gears. The contacts occurring in gears of this type are elliptical in shape with lubricant entrainment in the direction of the major axis of the contact. The results shown refer to a particular practical design and cover a range of operating conditions encountered in practice. Because of the high rolling velocity in W-N gears a relatively thick oil film is predicted over most of the contact. Severe thinning of the film occurs at the sides of the contact, however. Results of the full EHL analysis are compared with predictions using a published film thickness formula based upon analysis of moderately loaded elliptical contacts. It is suggested that the side-thinning effect is dependent upon the relative elastic deformation occurring in the contact.

Lubrication state identification of the line contact tribo-pair under a pure rolling condition with ultrasonic method

2021 ◽  
pp. 135065012110337
Author(s):  
Zhihe Duan ◽  
Tonghai Wu
Keyword(s):  
Theoretical Analysis ◽  
Film Thickness ◽  
Ultrasonic Method ◽  
Elastohydrodynamic Lubrication ◽  
Theoretical Models ◽  
Lubrication Theory ◽  
Operating Conditions ◽  
Line Contact ◽  
Oil Film ◽  
Pure Rolling

A line contact tribo-pair is a key mechanism unit in rolling bearings, which is often characterized by ultra-high contact pressure and ultra-thin oil film. Elastohydrodynamic lubrication is often adopted to characterize the lubrication state of such a tribo-pair. As a primary parameter for elastohydrodynamic lubrication, the oil film thickness is often evaluated with simplified theoretical models or complicated measurements. So far, a comprehensive verification of the lubrication states in a real line-contact tribo-pair, however, is rarely reported. Focusing on the roller/ring tribo-pair of a wet-lubricated rolling bearing under pure rolling conditions, this study investigates the lubrication states by integrating multiple theories. Five regions including isoviscous hydrodynamic, piezoviscous hydrodynamic, elastohydrodynamic lubrication, mixture lubrication, and boundary lubrication regions can be identified using the framework. Then, validation experiments are carried out on a line contact tribo-pair test rig under the same operating conditions applied in the theoretical analysis. The oil film thickness is measured by the ultrasonic method. The analysis results demonstrate that only two regions, the elastohydrodynamic lubrication and mixture lubrication regions, can be identified using the experimental data. The identified elastohydrodynamic lubrication and mixture lubrication regions are consistent with theoretical analysis; and the Blok equation and elastohydrodynamic lubrication theory are suggested to calculate the oil film thickness in the elastohydrodynamic lubrication and mixture lubrication regions, respectively. Moreover, the oil film thickness calculated by the Dowson equation is larger than that based on the elastohydrodynamic lubrication theory due to a different viscous pressure equation.

Influence of Surface Waviness on the Thermal Elastohydrodynamic Lubrication of an Eccentric-Tappet Pair

2013 ◽  
Vol 135 (2) ◽  
Author(s):  
J. Wang ◽  
C. H. Venner ◽  
A. A. Lubrecht
Keyword(s):  
Film Thickness ◽  
Elastohydrodynamic Lubrication ◽  
Surface Waviness ◽  
Film Pressure ◽  
Oil Film ◽  
Working Cycle ◽  
Temperature Oscillations ◽  
Minimum Film Thickness ◽  
Traction Coefficient ◽  
Oil Film Pressure

The effect of single-sided and double-sided harmonic surface waviness on the film thickness, pressure, and temperature oscillations in an elastohydrodynamically lubricated eccentric-tappet pair has been investigated in relation to the eccentricity and the waviness wavelength. The results show that, during one working cycle, the waviness causes significant fluctuations of the oil film, pressure, and temperature, as well as a reduction in minimum film thickness. Smaller wavelength causes more dramatic variations in oil film. The fluctuations of the pressure, film thickness, temperature, and traction coefficient caused by double-sided waviness are nearly the same compared with the single-sided waviness, but the variations are less intense.

Studying Systems of Stabilization of Supports in Hydrostatic Machine Tool

2012 ◽  
Vol 622-623 ◽  
pp. 489-493
Author(s):  
Iskander Beisembetov ◽  
Sabyi Ussupov ◽  
Bakhyt Absadykov ◽  
Beken Arymbekov ◽  
Birzhan Bektibay
Keyword(s):  
Film Thickness ◽  
Machine Tools ◽  
Operating Conditions ◽  
Coefficient Of Performance ◽  
Operational Parameters ◽  
Automatic Stabilization ◽  
Design Elements ◽  
Oil Film ◽  
Hydrostatic Bearing ◽  
Automatic Control Systems

Development relevance to improve the operational parameters of the support units of machine tools in their design elements is introduced that increase the rigidity of the components, their carrying capacity, damp occurring vibrations in the process, the coefficient of performance (COP), smoothness of motion, positioning accuracy, reducing the wear of their working surfaces and maintain the original accuracy. A number of engineering development [1], [2], aimed at improving the above characteristics of the machine by changing and improving design of reference nodes used in these rails rolling bearings, aerostatic and hydrostatic guides, as well as the use of automatic control systems of its basic parameters, determine its quality. However, in some operating conditions in which errors occur, mainly due to the instability of oil-film thickness (gap) between the mobile and immobile elements of the hydrostatic bearing. For high accuracy requirements it will negatively affect the quality of machined parts and equipment performance. On this basis, it becomes apparent urgency of the problem of automatic stabilization of oil-film thickness (gap) in the IR. To ensure high precision equipment to improve power system hydrostatic bearing units of machine tools. This, in turn, creates the prerequisite for the development of stabilization systems of the gap in the hydrostatic bearing, with the help of which the thickness of oil layer in them would be kept constant even with significant dynamic load on the support.

A Starved Mixed Elastohydrodynamic Lubrication Model for the Prediction of Lubrication Performance, Friction and Flash Temperature With Arbitrary Entrainment Angle

2017 ◽  
Vol 140 (3) ◽  
Author(s):  
Wei Pu ◽  
Dong Zhu ◽  
Jiaxu Wang
Keyword(s):  
Surface Roughness ◽  
Film Thickness ◽  
Elastohydrodynamic Lubrication ◽  
Industrial Applications ◽  
Operating Conditions ◽  
Flash Temperature ◽  
Machined Surface ◽  
Lubrication Performance ◽  
Wide Range ◽  
Starved Lubrication

In this study, a modified mixed lubrication model is developed with consideration of machined surface roughness, arbitrary entraining velocity angle, starvation, and cavitation. Model validation is executed by means of comparison between the obtained numerical results and the available starved elastohydrodynamic lubrication (EHL) data found from some previous studies. A comprehensive analysis for the effect of inlet oil supply condition on starvation and cavitation, mixed EHL characteristics, friction and flash temperature in elliptical contacts is conducted in a wide range of operating conditions. In addition, the influence of roughness orientation on film thickness and friction is discussed under different starved lubrication conditions. Obtained results reveal that inlet starvation leads to an obvious reduction of average film thickness and an increase in interasperity cavitation area due to surface roughness, which results in significant increment of asperity contacts, friction, and flash temperature. Besides, the effect of entrainment angle on film thickness will be weakened if the two surfaces operate under starved lubrication condition. Furthermore, the results show that the transverse roughness may yield thicker EHL films and lower friction than the isotropic and longitudinal if starvation is taken into account. Therefore, the starved mixed EHL model can be considered as a useful engineering tool for industrial applications.

Theoretical and experimental studies of the oil film in lubricated point contact

1966 ◽  
Vol 291 (1427) ◽  
pp. 520-536 ◽  
Keyword(s):  
Surface Layer ◽  
Film Thickness ◽  
Strong Evidence ◽  
Experimental Studies ◽  
Point Contact ◽  
Elastohydrodynamic Lubrication ◽  
Experimental Results ◽  
Point Contacts ◽  
Previous Theory ◽  
Oil Film

A technique using Newton’s rings for mapping the oil film of lubricated point contacts is described. A theoretical value for the film thickness of such contacts in elastohydrodynamic lubrication is derived. The experimental results give the exit constriction predicted by previous theory but never shown in detail. The comparison of theoretical and experimental oil film thicknesses, which is satisfactorily accurate, gives strong evidence for a viscous surface layer some 1000Å thick. This film agrees with the known ‘lubricating power’ of the various oils tested.

Simulation studies on static thermal behaviour of true elliptical and orthogonally displaced non-circular journal bearing

2016 ◽  
Vol 68 (3) ◽  
pp. 349-360 ◽  
Author(s):  
Amit Singla ◽  
Amit Chauhan
Keyword(s):  
Journal Bearing ◽  
Load Capacity ◽  
Current Trend ◽  
Operating Conditions ◽  
Performance Characteristics ◽  
Film Pressure ◽  
Content Type ◽  
Oil Film ◽  
Ellipticity Ratio ◽  
Oil Film Pressure

Purpose The current trend of modern industry is to use machineries which rotate at high speed along with the capability of carrying heavy rotor loads. This paper aims at static thermal analysis of two different profiles of non-circular journal bearings – a true elliptical bearing and orthogonal bearing. Design/methodology/approach The Reynolds equation has been solved through finite difference method to compute the oil film pressure. Parabolic temperature profile approximation technique has been used to solve the energy equation and thus used for computation of various bearing performance characteristics such as thermo-hydrodynamic oil film pressure, temperature, load capacity, Sommerfeld number and power loss characteristics across the bearing. The effect of ellipticity ratio on the bearing performance characteristics has also been obtained for both the elliptical and vertical offset bearing using three different commercially available grades of oil (Hydrol 32, 68 and 100). Findings It has been observed that the thermo-hydrodynamic pressure and temperature rise of the oil film is less in orthogonal bearing as compared to the true elliptical bearing for same operating conditions. The effect of ellipticity ratio of non-circularity on bearing performance parameters have been observed to be less in case of elliptical bearing as compared to orthogonal bearing. It has been concluded that though the rise in oil film temperature is high for true elliptical bearing, but still it should be preferred over orthogonal profile under study, as it has comparably good load-carrying capacity. Originality/value The performance parametric analysis will help the designers to select such kind of non-circular journal bearing for various applications.

Size effect on thermal elastohydrodynamic lubrication of industrial chain bush-pin hinge pair

2019 ◽  
Vol 71 (9) ◽  
pp. 1080-1085 ◽  
Author(s):  
Mingyu Zhang ◽  
Jing Wang ◽  
Yi Liu ◽  
Longjie Dai ◽  
Zhaohua Shang
Keyword(s):  
Friction Coefficient ◽  
Film Thickness ◽  
Temperature Rise ◽  
Elastohydrodynamic Lubrication ◽  
Curvature Radius ◽  
Line Contact ◽  
Content Type ◽  
Oil Film ◽  
Industrial Chain ◽  
Infinite Line

Purpose The purpose of this paper is to use elastohydrodynamic lubrication (EHL) theory to study the variation of the equivalent curvature radius “R” on the change of oil film thickness, pressure, temperature rise and friction coefficient in the contact zone between bush-pin in industrial chain drive. Design/methodology/approach In this paper, the contact between bush and pin is simplified as infinitely long line contact. The lubrication state is studied by numerical simulation using steady-state line contact thermal EHL. The two constitutive equations, namely, Newton fluid and Ree–Eyring fluid are used in the calculations. Findings It is found that with the increase of equivalent curvature radius, the thickness of oil film decreases and the temperature rise increases. Under the same condition, the friction coefficient of Newton fluid is higher than that of Ree–Eyring fluid. When the load increases, the oil film thickness decreases, the temperature rise increases and the friction coefficient decreases; and the film thickness increases with the increase of the entraining speed under the condition “R < 1,000 mm”. Research limitations/implications The infinite line contact assumption is only an approximation. For example, the distances between the two inner plates are 5.72 mm, by considering the two parts assembled into the inner plates, the total length of the bush is less than 6 mm. The diameter of the pin and the bore diameter of the bush are 3.28 and 3.33 mm. However, the infinite line contact is also helpful in understanding the general variation of oil film characteristics and provides a reference for the future study of finite line contact of chain problems. Originality/value The change of the equivalent radius R on the variation of the oil film in the contact of the bush and the pin in industrial chain drive was investigated. The size effect influences the lubrication characteristic greatly in the bush-pin pair.

Sign in / Sign up

Export Citation Format

Share Document