Natural Convection in a Horizontal Fluid Layer With Volumetric Energy Sources

1975 ◽  
Vol 97 (2) ◽  
pp. 204-211 ◽  
Author(s):  
F. A. Kulacki ◽  
M. E. Nagle
Keyword(s):  
Natural Convection ◽  
Fluid Layer ◽  
Lower Boundary ◽  
Linear Stability Theory ◽  
Volumetric Heating ◽  
Aspect Ratios ◽  
Side Walls ◽  
Rayleigh Numbers ◽  
Steady Heat ◽  
Horizontal Fluid Layer

Natural convection with volumetric heating in a horizontal fluid layer with a rigid, insulated lower boundary and a rigid, isothermal upper boundary is experimentally investigated for Rayleigh numbers from 114 to 1.8 × 106 times the critical value of linear stability theory. Joule heating by alternating current passing horizontally through the layer provides the volumetric energy source. Layer aspect ratios are kept small to minimize the effects of side walls. A correlation for mean Nusselt number is obtained for steady heat transfer, and data are presented on fluctuating temperatures at high Rayleigh numbers and on developing temperature distributions when the layer is subjected to a step change in power.

Stabilization of the No-Motion State of a Horizontal Fluid Layer Heated From Below With Joule Heating

1995 ◽  
Vol 117 (2) ◽  
pp. 329-333 ◽  
Author(s):  
J. Tang ◽  
H. H. Bau
Keyword(s):  
Joule Heating ◽  
Fluid Layer ◽  
Control Strategies ◽  
Critical Rayleigh Number ◽  
Linear Stability Theory ◽  
Small Perturbations ◽  
Motion State ◽  
Conduction State ◽  
Rayleigh Numbers ◽  
Horizontal Fluid Layer

Using linear stability theory and numerical simulations, we demonstrate that the critical Rayleigh number for bifurcation from the no-motion (conduction) state to the motion state in the Rayleigh–Be´nard problem of an infinite fluid layer heated from below with Joule heating and cooled from above can be significantly increased through the use of feedback control strategies effecting small perturbations in the boundary data. The bottom of the layer is heated by a network of heaters whose power supply is modulated in proportion to the deviations of the temperatures at various locations in the fluid from the conductive, no-motion temperatures. Similar control strategies can also be used to induce complicated, time-dependent flows at relatively low Rayleigh numbers.

Natural Convection in Horizontal Thin-Walled Honeycomb Panels

1973 ◽  
Vol 95 (4) ◽  
pp. 439-444 ◽  
Author(s):  
K. G. T. Hollands
Keyword(s):  
Heat Transfer ◽  
Natural Convection ◽  
Fluid Layer ◽  
Convection Heat Transfer ◽  
Correlation Equation ◽  
Wave Number ◽  
Equivalent Wave ◽  
Side Walls ◽  
The Stability ◽  
Rayleigh Numbers

This paper presents an experimental study of the stability of and natural convection heat transfer through a horizontal fluid layer heated from below and constrained internally by a honeycomb. Examination of the types of boundary conditions exacted on the fluid at the cell side-walls has shown that there are three limiting cases: (1) perfectly conducting side-walls; (2) perfectly adiabatic side-walls; and (3) side-walls having zero thickness. Experiments described in this paper approach the latter category. The fluid used is air and the honeycomb used is square-celled. Measured critical Rayleigh numbers are found to be intermediate between those applying to cases (1) and (2), and consistent with an “equivalent wave number” of approximately 0.95 times that for case (1). The measured natural convective heat transfer after instability is found to be significantly less than that predicted by the Malkus-Veronis power integral technique. However, it is found to approach asymptotically the heat transfer which would take place through a similar fluid layer unconstrained by a honeycomb. A general correlation equation for the heat transfer is given.

Natural Convection in Inclined Two Dimensional Rectangular Cavities

2009 ◽  
Author(s):  
Lyes Khezzar ◽  
Dennis Siginer
Keyword(s):  
Natural Convection ◽  
Two Dimensional ◽  
Square Cavity ◽  
Transfer Rates ◽  
Aspect Ratios ◽  
Temperature Distributions ◽  
Start Up ◽  
Side Walls ◽  
Boussinesq Fluid ◽  
Rayleigh Numbers

Steady two-dimensional natural convection in fluid filled cavities has been investigated numerically. The conservation equations of mass, momentum and energy governing the motion of a Newtonian Boussinesq fluid have been numerically solved using the finite volume technique. The computations were performed for three cavity height based Rayleigh numbers 104, 105 and 106. In all of the numerical experiments, the channel is heated from below and cooled from the top with insulated side-walls and the inclination angle is varied. The simulations have been carried out for several aspect ratios. For the case of the square cavity the calculated values are in excellent agreement with previously published benchmark results. The effects of the inclination of the cavity to the horizontal, with the angle varying from 0 to 180° and the initial start up conditions were investigated in turn for each aspect ratio. The inclination and the “initial” assumed conditions have a significant effect on the flow patterns, temperature distributions and the heat transfer rates. In particular it is found that the average Nusselt number exhibits discontinuities for rectangular cavities and that the occurrence of the discontinuity with angle of inclination is strongly influenced by the assumed start up field in the steady calculations in much the same way as the hysteresis effect that was identified by other workers.

Oscillatory Natural Convection of a Liquid Metal in Circular Cylinders

1994 ◽  
Vol 116 (3) ◽  
pp. 627-632 ◽  
Author(s):  
Y. Kamotani ◽  
F.-B. Weng ◽  
S. Ostrach ◽  
J. Platt
Keyword(s):  
Experimental Study ◽  
Natural Convection ◽  
Liquid Metal ◽  
Oscillatory Flow ◽  
Circular Cylinders ◽  
Flow Structures ◽  
Supercritical Flow ◽  
Aspect Ratios ◽  
Oscillation Frequencies ◽  
Rayleigh Numbers

An experimental study is made of natural convection oscillations in gallium melts enclosed by right circular cylinders with differentially heated end walls. Cases heated from below are examined for angles of inclination (φ) ranging from 0 deg (vertical) to 75 deg with aspect ratios Ar (height/diameter) of 2, 3, and 4. Temperature measurements are made along the circumference of the cylinder to detect the oscillations, from which the oscillatory flow structures are inferred. The critical Rayleigh numbers and oscillation frequencies are determined. For Ar=3 and φ = 0 deg, 30 deg the supercritical flow structures are discussed in detail.

scholarly journals Effects of Anisotropy on Natural Convection in a Vertical Porous Cavity Filled with a Heat Generation

2020 ◽  
pp. 12-27
Author(s):  
Degan Gerard ◽  
Sokpoli Amavi Ernest ◽  
Akowanou Djidjoho Christian ◽  
Vodounnou Edmond Claude
Keyword(s):  
Heat Transfer ◽  
Porous Medium ◽  
Natural Convection ◽  
Rayleigh Number ◽  
Temperature Fields ◽  
Poisson Equations ◽  
Gravitational Vector ◽  
Side Walls ◽  
Rayleigh Numbers ◽  
Vertical Cavity

This research was devoted to the analytical study of heat transfer by natural convection in a vertical cavity, confining a porous medium, and containing a heat source. The porous medium is hydrodynamically anisotropic in permeability whose axes of permeability tensor are obliquely oriented relative to the gravitational vector and saturated with a Newtonian fluid. The side walls are cooled to the temperature  and the horizontal walls are kept adiabatic. An analytical solution to this problem is found for low Rayleigh numbers by writing the solutions of mathematical model in polynomial form of degree n of the Rayleigh number. Poisson equations obtained are solved by the modified Galerkin method. The results are presented in term of streamlines and isotherms. The distribution of the streamlines and the temperature fields are greatly influenced by the permeability anisotropy parameters and the thermal conductivity. The heat transfer decreases considerably when the Rayleigh number increases.

Natural Convection Inside a Bidisperse Porous Medium Enclosure

2009 ◽  
Vol 132 (1) ◽  
Author(s):  
Arunn Narasimhan ◽  
B. V. K. Reddy
Keyword(s):  
Heat Transfer ◽  
Porous Medium ◽  
Natural Convection ◽  
Volume Fraction ◽  
Solid Phase ◽  
Darcy Number ◽  
The Core ◽  
Side Walls ◽  
Porous Blocks ◽  
Rayleigh Numbers

Bidisperse porous medium (BDPM) consists of a macroporous medium whose solid phase is replaced with a microporous medium. This study investigates using numerical simulations, steady natural convection inside a square BDPM enclosure made from uniformly spaced, disconnected square porous blocks that form the microporous medium. The side walls are subjected to differential heating, while the top and bottom ones are kept adiabatic. The bidispersion effect is generated by varying the number of blocks (N2), macropore volume fraction (ϕE), and internal Darcy number (DaI) for several enclosure Rayleigh numbers (Ra). Their effect on the BDPM heat transfer (Nu) is investigated. When Ra is fixed, the Nu increases with an increase in both DaI and DaE. At low Ra values, Nu is strongly affected by both DaI and ϕE. When N2 is fixed, at high Ra values, the porous blocks in the core region have negligible effect on the Nu. A correlation is proposed to evaluate the heat transfer from the BDPM enclosure, Nu, as a function of Raϕ, DaE, DaI, and N2. It predicts the numerical results of Nu within ±15% and ±9% in two successive ranges of modified Rayleigh number, RaϕDaE.

Transient Natural Convection Experiments in Shallow Enclosures

1982 ◽  
Vol 104 (3) ◽  
pp. 533-538 ◽  
Author(s):  
R. Yewell ◽  
D. Poulikakos ◽  
A. Bejan
Keyword(s):  
Steady State ◽  
Natural Convection ◽  
Theoretical Prediction ◽  
Thermal Stratification ◽  
Wave Motion ◽  
The Core ◽  
Transient Natural Convection ◽  
Aspect Ratios ◽  
Approach To Steady State ◽  
Rayleigh Numbers

This paper reports experimental observations on transient natural convection in enclosures at high Rayleigh numbers (1.28×109, 1.49×109) and low aspect ratios (0.0625, 0.112). The phenomenon consists of the establishment of thin intrusion layers along the horizontal adiabatic surfaces; in time, the intrusion layers exchange heat with the isothermal core of the cavity, leading to the thermal stratification of the core. The approach to steady state is gradual, contrary to the theoretical prediction of Brunt-Vaisala wave motion (Patterson and Imberger [6]). The measured durations of the observed transients agree very well with theoretical estimates.

scholarly journals Lattice Boltzmann simulation of turbulent natural convection in tall enclosures

2015 ◽  
Vol 19 (1) ◽  
pp. 155-166 ◽  
Author(s):  
Hasan Sajjadi ◽  
Reza Kefayati
Keyword(s):  
Nusselt Number ◽  
Natural Convection ◽  
Lattice Boltzmann ◽  
Average Nusselt Number ◽  
Large Eddy Simulations ◽  
Turbulent Natural Convection ◽  
Aspect Ratios ◽  
Lattice Boltzmann Simulation ◽  
Large Eddy ◽  
Rayleigh Numbers

In this paper Lattice Boltzmann simulation of turbulent natural convection with large-eddy simulations (LES) in tall enclosures which is filled by air with Pr=0.71 has been studied. Calculations were performed for high Rayleigh numbers (Ra=107-109) and aspect ratios change between 0.5 to 2 (0.5<AR<2). The present results are validated by finds of an experimental research at Ra=1.58x109. Effects of the aspect ratios in different Rayleigh numbers are displayed on streamlines, isotherm counters, vertical velocity and temperature at the middle of the cavity, local Nusselt number and average Nusselt number. The average Nusselt number increases with the augmentation of Rayleigh numbers. The increment of the aspect ratio causes heat transfer to decline in different Rayleigh numbers.

Sign in / Sign up

Export Citation Format

Share Document