A Theoretical and Experimental Study of Confined Vortex Flow

1969 ◽  
Vol 36 (4) ◽  
pp. 687-692 ◽  
Author(s):  
G. J. Farris ◽  
G. J. Kidd ◽  
D. W. Lick ◽  
R. E. Textor
Keyword(s):  
Flow Field ◽  
Radial Flow ◽  
Stokes Equations ◽  
Numerical Technique ◽  
Tangential Velocity ◽  
Reynolds Numbers ◽  
Navier Stokes ◽  
Navier Stokes Equations ◽  
General Validity ◽  
Wide Range

The interaction of a vortex with a stationary surface was studied both theoretically and experimentally. The flow field examined was that produced by radially inward flow through a pair of concentric rotating porous cylinders that were perpendicular to, and in contact with, a stationary flat plane. The complete Navier-Stokes equations were solved over a range of tangential Reynolds numbers from 0–300 and a range of radial Reynolds numbers from 0 to −13, the minus sign indicating radially inward flow. In order to facilitate the solution, the original equations were recast in terms of a dimensionless stream function, vorticity, and third variable related to the tangential velocity. The general validity of the numerical technique was demonstrated by the agreement between the theoretical and experimental results. Examination of the numerical results over a wide range of parameters showed that the entire flow field is very sensitive to the amount of radial flow, especially at the transition from zero radial flow to some finite value.

Inward Flow Between Stationary and Rotating Disks

2014 ◽  
Vol 136 (10) ◽  
Author(s):  
Achhaibar Singh
Keyword(s):  
Laminar Flow ◽  
Flow Field ◽  
Velocity Distribution ◽  
Stokes Equations ◽  
Tangential Velocity ◽  
Rotating Disk ◽  
Reynolds Numbers ◽  
Navier Stokes ◽  
Rotating Disks ◽  
Navier Stokes Equations

The present study predicts the flow field and the pressure distribution for a laminar flow in the gap between a stationary and a rotating disk. The fluid enters through the peripheral gap between two concentric disks and converges to the center where it discharges axially through a hole in one of the disks. Closed form expressions have been derived by simplifying the Navier– Stokes equations. The expressions predict the backflow near the rotating disk due to the effect of centrifugal force. A convection effect has been observed in the tangential velocity distribution at high throughflow Reynolds numbers.

scholarly journals Turbulent 2.5-dimensional dynamos

2016 ◽  
Vol 799 ◽  
pp. 246-264 ◽  
Author(s):  
K. Seshasayanan ◽  
A. Alexakis
Keyword(s):  
Turbulent Flows ◽  
Large Scale ◽  
Stokes Equations ◽  
Three Dimensional ◽  
Reynolds Numbers ◽  
Navier Stokes ◽  
Two Dimensional ◽  
Navier Stokes Equations ◽  
Wide Range ◽  
Two Dimensional Flow

We study the linear stage of the dynamo instability of a turbulent two-dimensional flow with three components $(u(x,y,t),v(x,y,t),w(x,y,t))$ that is sometimes referred to as a 2.5-dimensional (2.5-D) flow. The flow evolves based on the two-dimensional Navier–Stokes equations in the presence of a large-scale drag force that leads to the steady state of a turbulent inverse cascade. These flows provide an approximation to very fast rotating flows often observed in nature. The low dimensionality of the system allows for the realization of a large number of numerical simulations and thus the investigation of a wide range of fluid Reynolds numbers $Re$, magnetic Reynolds numbers $Rm$ and forcing length scales. This allows for the examination of dynamo properties at different limits that cannot be achieved with three-dimensional simulations. We examine dynamos for both large and small magnetic Prandtl-number turbulent flows $Pm=Rm/Re$, close to and away from the dynamo onset, as well as dynamos in the presence of scale separation. In particular, we determine the properties of the dynamo onset as a function of $Re$ and the asymptotic behaviour in the large $Rm$ limit. We are thus able to give a complete description of the dynamo properties of these turbulent 2.5-D flows.

Prediction of Cascade Performance Using an Incompressible Navier–Stokes Technique

1991 ◽  
Vol 113 (4) ◽  
pp. 561-571 ◽  
Author(s):  
G. V. Hobson ◽  
B. Lakshminarayana
Keyword(s):  
Stokes Equations ◽  
Control Volume ◽  
Numerical Technique ◽  
Skin Friction Coefficient ◽  
Navier Stokes ◽  
Compressor Cascade ◽  
Navier Stokes Equations ◽  
Wide Range ◽  
Distribution Boundary ◽  
Turbulence Effects

A fully elliptic, control volume solution of the two-dimensional incompressible Navier–Stokes equations for the prediction of cascade performance over a wide range is presented in this paper. The numerical technique is based on a new pressure substitution method. A Poisson equation is derived from the pressure-weighted substitution of the full momentum equations into the continuity equation. The analysis of a double circular arc compressor cascade is presented, and the results are compared with the available experimental data at various incidence angles. Good agreement is obtained for the blade pressure distribution, boundary layer and wake profiles, skin friction coefficient, losses and outlet angles. Turbulence effects are simulated by the low-Reynolds-number version of the k–ε turbulence model.

Steady Laminar Flow in a Stationary Tank With a Spinning Bottom

1975 ◽  
Vol 42 (4) ◽  
pp. 771-776 ◽  
Author(s):  
C. V. Alonso
Keyword(s):  
Stokes Equations ◽  
Tangential Velocity ◽  
Navier Stokes ◽  
Navier Stokes Equations ◽  
General Validity ◽  
Alternating Direction Implicit ◽  
Incompressible Viscous Flow ◽  
Alternating Direction ◽  
Alternating Direction Implicit Scheme ◽  
Steady Laminar

The steady incompressible viscous flow induced in a cylindrical tank by the rotation of its bottom was studied both theoretically and experimentally. The complete Navier-Stokes equations are expressed in terms of the tangential velocity, vorticity, and meridional stream function. The transformed equations are solved numerically using an alternating-direction implicit scheme and a nonuniform grid. The general validity of the numerical solution was demonstrated by the agreement between the computed and experimental results.

Analysis of Mixing and Flow Structure in Different Passive Micromixers

2009 ◽  
Author(s):  
Shakhawat Hossain ◽  
Mubashshir Ahmad Ansari ◽  
Kwang-Yong Kim
Keyword(s):  
Pressure Drop ◽  
Stokes Equations ◽  
Reynolds Numbers ◽  
Navier Stokes ◽  
Channel Height ◽  
Navier Stokes Equations ◽  
Pressure Drops ◽  
Square Wave ◽  
Mixing Performance ◽  
Wide Range

This work presents a numerical investigation on mixing and flow structures in microchannels with different geometries: zig-zag; square-wave; and curved. To conduct the investigation, geometric parameters, such as the area of the cross-section of channel, height of the channel, axial length of the channel, and number of pitches, are kept constant for all three cases. Analyses of mixing and flow fields have been carried out for a wide range 0.267 to 267 of the Reynolds number. Mixing in the channels has been analyzed by using Navier-Stokes equations with two working fluids, water and ethanol. The results show that the square-wave microchannel yields the best mixing performance, and the curved and the zig-zag microchannels show nearly the same performance for most Reynolds numbers. For all three cases, the pressure drop has been calculated for channels with equal streamwise-lengths. The curved channel exhibits the smallest pressure drop among the microchannels, while the pressure drops in the square-wave and zigzag channels are approximately the same.

Simulation of Unsteady Flow Around a Cylinder

2015 ◽  
Vol 3 (2) ◽  
pp. 28-49
Author(s):  
Ridha Alwan Ahmed
Keyword(s):  
Stokes Equations ◽  
Lift Coefficient ◽  
Reynolds Numbers ◽  
Mean Value ◽  
Navier Stokes ◽  
Cylinder Surface ◽  
Navier Stokes Equations ◽  
Flow Around A Cylinder ◽  
Numerical Grid ◽  
Good Agreement

       In this paper, the phenomena of vortex shedding from the circular cylinder surface has been studied at several Reynolds Numbers (40≤Re≤ 300).The 2D, unsteady, incompressible, Laminar flow, continuity and Navier Stokes equations have been solved numerically by using CFD Package FLUENT. In this package PISO algorithm is used in the pressure-velocity coupling.        The numerical grid is generated by using Gambit program. The velocity and pressure fields are obtained upstream and downstream of the cylinder at each time and it is also calculated the mean value of drag coefficient and value of lift coefficient .The results showed that the flow is strongly unsteady and unsymmetrical at Re>60. The results have been compared with the available experiments and a good agreement has been found between them

On the Flow Fields of Inertial Impactors

1974 ◽  
Vol 96 (4) ◽  
pp. 394-400 ◽  
Author(s):  
V. A. Marple ◽  
B. Y. H. Liu ◽  
K. T. Whitby
Keyword(s):  
Flow Field ◽  
Stokes Equations ◽  
Relaxation Method ◽  
Water Model ◽  
Navier Stokes ◽  
Visualization Technique ◽  
Navier Stokes Equations ◽  
Theoretical Results ◽  
Plate Distance ◽  
Good Agreement

The flow field in an inertial impactor was studied experimentally with a water model by means of a flow visualization technique. The influence of such parameters as Reynolds number and jet-to-plate distance on the flow field was determined. The Navier-Stokes equations describing the laminar flow field in the impactor were solved numerically by means of a finite difference relaxation method. The theoretical results were found to be in good agreement with the empirical observations made with the water model.

Fluid flow over and through a regular bundle of rigid fibres

2016 ◽  
Vol 792 ◽  
pp. 5-35 ◽  
Author(s):  
Giuseppe A. Zampogna ◽  
Alessandro Bottaro
Keyword(s):  
Porous Medium ◽  
Fluid Flow ◽  
Flow Field ◽  
Stokes Equations ◽  
Transversely Isotropic ◽  
Navier Stokes ◽  
Leading Order ◽  
Macroscopic Scale ◽  
Navier Stokes Equations ◽  
Homogenized Model

The interaction between a fluid flow and a transversely isotropic porous medium is described. A homogenized model is used to treat the flow field in the porous region, and different interface conditions, needed to match solutions at the boundary between the pure fluid and the porous regions, are evaluated. Two problems in different flow regimes (laminar and turbulent) are considered to validate the system, which includes inertia in the leading-order equations for the permeability tensor through a Oseen approximation. The components of the permeability, which characterize microscopically the porous medium and determine the flow field at the macroscopic scale, are reasonably well estimated by the theory, both in the laminar and the turbulent case. This is demonstrated by comparing the model’s results to both experimental measurements and direct numerical simulations of the Navier–Stokes equations which resolve the flow also through the pores of the medium.

Burgers turbulence model for a channel flow

1971 ◽  
Vol 47 (2) ◽  
pp. 321-335 ◽  
Author(s):  
Jon Lee
Keyword(s):  
Channel Flow ◽  
Stokes Equations ◽  
Turbulent Channel Flow ◽  
Reynolds Numbers ◽  
Navier Stokes ◽  
Amplitude Equations ◽  
Fourier Amplitude ◽  
Navier Stokes Equations ◽  
Burgers Model ◽  
Model Dynamics

The truncated Burgers models have a unique equilibrium state which is defined continuously for all the Reynolds numbers and attainable from a realizable class of initial disturbances. Hence, they represent a sequence of convergent approximations to the original (untruncated) Burgers problem. We have pointed out that consideration of certain degenerate equilibrium states can lead to the successive turbulence-turbulence transitions and finite-jump transitions that were suggested by Case & Chiu. As a prototype of the Navier–Stokes equations, Burgers model can simulate the initial-value type of numerical integration of the Fourier amplitude equations for a turbulent channel flow. Thus, the Burgers model dynamics display certain idiosyncrasies of the actual channel flow problem described by a truncated set of Fourier amplitude equations, which includes only a modest number of modes due to the limited capability of the computer at hand.

Sign in / Sign up

Export Citation Format

Share Document