Experiments on Heat Transfer From Spheres Including Combined Natural and Forced Convection

1960 ◽  
Vol 82 (3) ◽  
pp. 214-220 ◽  
Author(s):  
T. Yuge
Keyword(s):  
Heat Transfer ◽  
Forced Convection ◽  
Heat Transfer Performance ◽  
Air Flow ◽  
Reynolds Numbers ◽  
Experimental Results ◽  
Transfer Performance ◽  
Empirical Formulas ◽  
Combined Convection

Experiments on heat transfer between spheres and air flow were carried out in the range of Reynolds numbers from 3.5 to 1.44 × 105 and Grashof numbers from 1 to 105. Empirical formulas for forced, natural, and combined convection are presented and comparison made with other investigations. A graphical procedure, based on experimental results, is used to predict the heat-transfer performance for combined natural and forced convection.

scholarly journals Numerical study of flow patterns and heat transfer in mini twisted oval tubes

2015 ◽  
Vol 26 (12) ◽  
pp. 1550140 ◽  
Author(s):  
Amin Ebrahimi ◽  
Ehsan Roohi
Keyword(s):  
Heat Transfer ◽  
Heat Transfer Performance ◽  
Numerical Study ◽  
Critical Role ◽  
Reynolds Numbers ◽  
Flow Patterns ◽  
Working Fluid ◽  
Transfer Performance ◽  
Temperature Dependent ◽  
Overall Performance

Flow patterns and heat transfer inside mini twisted oval tubes (TOTs) heated by constant-temperature walls are numerically investigated. Different configurations of tubes are simulated using water as the working fluid with temperature-dependent thermo-physical properties at Reynolds numbers ranging between 500 and 1100. After validating the numerical method with the published correlations and available experimental results, the performance of TOTs is compared to a smooth circular tube. The overall performance of TOTs is evaluated by investigating the thermal-hydraulic performance and the results are analyzed in terms of the field synergy principle and entropy generation. Enhanced heat transfer performance for TOTs is observed at the expense of a higher pressure drop. Additionally, the secondary flow generated by the tube-wall twist is concluded to play a critical role in the augmentation of convective heat transfer, and consequently, better heat transfer performance. It is also observed that the improvement of synergy between velocity and temperature gradient and lower irreversibility cause heat transfer enhancement for TOTs.

3D Printed Architected Heat Sinks Cooling Performance in Free and Forced Convection Environments

2020 ◽  
Author(s):  
Mohamed I. Hassan Ali ◽  
Oraib Al-Ketan ◽  
Mohamad Khalil ◽  
Nada Baobaid ◽  
Kamran Khan ◽  
...  
Keyword(s):  
Heat Transfer ◽  
Pressure Drop ◽  
Forced Convection ◽  
Heat Transfer Performance ◽  
Convection Heat Transfer ◽  
Heat Sinks ◽  
Cfd Modeling ◽  
Transfer Performance ◽  
Convection Heat ◽  
Performance Study

Abstract In this work, we extend our heat transfer performance study on our proposed new and novel 3D printable architected heat sinks with geometrically complex structures based on triply periodic minimal surfaces (TPMS). Computational fluid dynamics (CFD) modeling is used to assess the effect of porosity distribution, heat load, and isothermal boundary condition on the performance of the proposed TPMS-based heat sinks in active cooling using natural and forced convection heat transfer environments. The convection heat transfer coefficient, surface temperature, pressure drop are predicted using CFD method. The CFD model is validated using experimental results for the pressure drop and is verified by standard analytical results. Three TPMS structures are investigated in different orientations. Dimensionless heat transfer groups are developed to globalize the heat transfer performance of the proposed heat sinks.

Experimental Investigation of Oscillating Heat Pipe With Hybrid Fluids of Liquid Metal and Water

2019 ◽  
Vol 141 (7) ◽  
Author(s):  
Tingting Hao ◽  
Hongbin Ma ◽  
Xuehu Ma
Keyword(s):  
Heat Transfer ◽  
Liquid Metal ◽  
Heat Pipe ◽  
Heat Input ◽  
Heat Transfer Performance ◽  
Pure Water ◽  
Experimental Results ◽  
Working Fluid ◽  
Transfer Performance ◽  
Oscillating Heat Pipe

A new oscillating heat pipe (OHP) charged with hybrid fluids can improve thermal performance. The key difference in this OHP is that it uses room temperature liquid metal (Galinstan consisting of gallium, indium, and tin) and water as the working fluid. The OHP was fabricated on a copper plate with six turns and a 3 × 3 mm2 cross section. The OHP with hybrid fluids as the working fluid was investigated through visual observation and thermal measurement. Liquid metal was successfully driven to flow through the OHP by the pressure difference between the evaporator and the condenser without external force. Experimental results show that while added liquid metal can increase the heat transport capability, liquid metal oscillation amplitude decreases as the filling ratio of liquid metal increases. Visualization of experimental results show that liquid metal oscillation position and velocity increase as the heat input increases. Oscillating motion of liquid metal in the OHP significantly increases the heat transfer performance at high heat input. The lowest thermal resistance of 0.076 °C/W was achieved in the hybrid fluids-filled OHP with a heat input of 420 W. We experimentally demonstrated a 13% higher heat transfer performance using liquid metal as the working fluid compared to an OHP charged with pure water.

Heat Transfer Performance During Condensation Inside Spiralled Micro-Fin Tubes

2004 ◽  
Vol 126 (3) ◽  
pp. 321-328 ◽  
Author(s):  
Jean-Pierre M. Bukasa ◽  
Leon Liebenberg ◽  
Josua P. Meyer
Keyword(s):  
Heat Transfer ◽  
Heat Transfer Performance ◽  
Geometric Parameters ◽  
Experimental Results ◽  
Outer Diameter ◽  
Transfer Performance ◽  
Fin Tube ◽  
R 134A ◽  
Fin Tubes ◽  
Spiral Angle

The effect of the spiral angle on the heat transfer performance in micro-fin tube condensers has not yet been clearly established because other geometric parameters affecting the heat transfer performance were simultaneously varied in previous studies. This paper reports on the influence of the spiral angle on the heat transfer during condensation inside spiralled micro-fin tubes having all other geometric parameters constant. Tests were conducted for condensation of R-22, R-134a, and R-407C inside a smooth (9.52 mm outer diameter) and three micro-fin tubes with approximately the same diameter, having spiral angles of 10 deg, 18 deg, and 37 deg, respectively. Experimental results indicated a heat transfer augmentation with spiral angle increase. A new semi-empirical predictive correlation was developed for practical design of spiralled micro-fin tubes. The proposed new correlation predicted the majority of experimental results of the present study within a deviation zone of ±20%.

Sign in / Sign up

Export Citation Format

Share Document