scholarly journals Forced Response Analysis of High-Mode Vibrations for Mistuned Bladed Disks With Effective Reduced-Order Models

2016 ◽  
Vol 138 (11) ◽  
Author(s):  
Yongliang Duan ◽  
Chaoping Zang ◽  
E. P. Petrov
Keyword(s):  
Dynamic Properties ◽  
Forced Response ◽  
High Mode ◽  
Mode Shapes ◽  
Response Analysis ◽  
Fe Model ◽  
Computationally Efficient ◽  
Bladed Disks ◽  
Accurate Analysis ◽  
Bladed Disk

This paper is focused on the analysis of effects of mistuning on the forced response of gas turbine engine bladed disks vibrating in the frequency ranges corresponding to higher modes. For high modes considered here, the blade aerofoils are deformed during vibrations and the blade mode shapes differ significantly from beam mode shapes. A model reduction technique is developed for the computationally efficient and accurate analysis of forced response for bladed disks vibrating in high-frequency ranges. The high-fidelity finite element (FE) model of a tuned bladed disk sector is used to provide primary information about dynamic properties of a bladed disk, and the blade mistuning is modeled by specially defined mistuning matrices. The forced response displacement and stress amplitude levels are studied. The effects of different types of mistuning are examined, and the existence of high amplifications of mistuned forced response levels is shown for high-mode vibrations: in some cases, the resonance peak response of a tuned structure can be lower than out-of-resonance amplitudes of its mistuned counterpart.

scholarly journals Forced Response Analysis of High-Mode Vibrations for Mistuned Bladed Discs With Effective Reduced-Order Models

2015 ◽  
Author(s):  
Yongliang Duan ◽  
Chaoping Zang ◽  
E. P. Petrov
Keyword(s):  
High Frequency ◽  
Dynamic Properties ◽  
Forced Response ◽  
High Mode ◽  
Mode Shapes ◽  
Response Analysis ◽  
Computationally Efficient ◽  
Accurate Analysis ◽  
Reduced Order ◽  
Model Reduction Technique

This paper is focused on the analysis of effects of mistuning on the forced response of gas-turbine bladed discs vibrating in the frequency ranges corresponding to higher modes. For high modes the blade aerofoils are deformed during vibrations and the blade mode shapes differ significantly from beam mode shapes. A model reduction technique is developed for the computationally efficient and accurate analysis of forced response for bladed discs vibrating in high frequency ranges. High-fidelity finite element models of a tuned bladed disc sector are used to provide primary information about dynamic properties of a bladed disc and the blade mistuning is modelled by specially defined mistuning matrices. The forced response displacement and stress amplitude levels are studied for high frequency ranges. The effects of different types of mistuning are examined and the existence of high amplifications of mistuned forced response levels is shown for high-mode vibrations: in some cases, the resonance peak response of a tuned structure can be lower than out-of-resonance amplitudes of its mistuned counterpart.

High Fidelity Transient Forced Response Analysis of Mistuned Bladed Disks Under Complex Excitation and Variable Rotation Speeds

2020 ◽  
Author(s):  
Jing Tong ◽  
Chaoping Zang ◽  
Evgeny Petrov
Keyword(s):  
Large Scale ◽  
Rotation Speed ◽  
Dynamic Properties ◽  
Spectral Composition ◽  
Forced Response ◽  
Mode Shapes ◽  
Response Analysis ◽  
Bladed Disks ◽  
Bladed Disk ◽  
Amplitude Amplification

Abstract An effective method is developed for the efficient calculation of the transient vibration response for mistuned bladed disks under complex excitation and varying rotation speeds. The method uses the large-scale finite element modelling of the bladed disks allowing the accurate description of the dynamic properties of the mistuned bladed disks. The realistic distributions of the excitation forces are considered, which resulted in the multiharmonic excitation loads. The transient response calculation is based on the analytically derived expressions for the transient forced response and the effective method used for the model reduction. The effects of the varying rotation speed on the natural frequencies and mode shapes of the mistuned bladed disk and its effects on the amplitude and the spectral composition of the loading are allowed for. The different functions of the rotation speed variation can be analyzed. Numerical studies of the transient forced response and the amplitude amplification in mistuned bladed disks are performed when the resonance regimes are passed during gas-turbine engine acceleration or deceleration. The effects of different types of excitation force and mistuning on transient amplitude amplification are illustrated by a large number of the computational results and comparative analysis. These results and analysis of transient forced response are shown on an example of a realistic mistuned bladed disk.

Analysis of Forced Response for Bladed Disks Mistuned by Material Anisotropy Orientation Scatters

2017 ◽  
Vol 140 (2) ◽  
Author(s):  
Chaoping Zang ◽  
Yuanqiu Tan ◽  
E. P. Petrov
Keyword(s):  
Finite Element ◽  
Monte Carlo ◽  
High Accuracy ◽  
Forced Response ◽  
Response Analysis ◽  
High Fidelity ◽  
Fe Model ◽  
Material Anisotropy ◽  
Bladed Disks ◽  
Bladed Disk

A new method is developed for the forced response analysis of mistuned bladed disks manufactured from anisotropic materials and mistuned by different orientations of material anisotropy axes. The method uses (i) sector finite element (FE) models of anisotropic bladed disks and (ii) FE models of single blades and allows the calculation of displacements and stresses in a mistuned assembly. A high-fidelity reduction approach is proposed which ensures high-accuracy modeling by introducing an enhanced reduction basis. The reduction basis includes the modal properties of specially selected blades and bladed disks. The technique for the choice of the reduction basis has been developed, which provides the required accuracy while keeping the computation expense acceptable. An approach for effective modeling of anisotropy-mistuned bladed disk without a need to create a FE model for each mistuning pattern is developed. The approach is aimed at fast statistical analysis based on Monte Carlo simulations. All components of the methodology for anisotropy-mistuned bladed disks are demonstrated on the analysis of models of practical bladed disks. Effects of anisotropy mistuning on forced response levels are explored.

Accurate Interpolation of the Dependency of Modal Properties on the Rotation Speed for the Transient Response Analysis of Bladed Disks

2021 ◽  
Author(s):  
Jing Tong ◽  
Chaoping Zang ◽  
E. P. Petrov
Keyword(s):  
Transient Response ◽  
Rotation Speed ◽  
Spectral Composition ◽  
Forced Response ◽  
Reference Points ◽  
Mode Shapes ◽  
Response Analysis ◽  
Transient Vibration ◽  
Bladed Disks ◽  
Bladed Disk

Abstract During fast gas-turbine engine acceleration and deceleration the transient vibration effects in bladed disk vibration become significant and the transient response has to be calculated. In this paper an effective method is developed for efficient calculations of the transient vibration response for mistuned bladed disks under varying rotation speeds. The method uses the large-scale finite element modelling of the bladed disks allowing the accurate description of the dynamic properties of the mistuned bladed disks. The effects of the varying rotation speed on the natural frequencies and mode shapes of a mistuned bladed disk and its effects on the amplitude and the spectral composition of the loading are considered. The dependency of the modal characteristics on the rotation speed are based on the evaluation of these characteristics at reference points followed by the interpolation to obtain values at any rotation speed from the operating range. A new method has been developed for the interpolation of mode shapes while preserving the orthogonality and mass-normalization of the mode shapes. The method of mode shape interpolation is elaborated for tuned and mistuned bladed disks. The accuracy and efficiency of the method is demonstrated on test examples and on analysis of transient forced response of realistic bladed discs.

Accurate Interpolation of the Dependency of Modal Properties On the Rotation Speed for the Transient Response Analysis of Bladed Disks

2021 ◽  
Author(s):  
Jing Tong ◽  
Chaoping Zang ◽  
Evgeny Petrov
Keyword(s):  
Transient Response ◽  
Rotation Speed ◽  
Spectral Composition ◽  
Forced Response ◽  
Reference Points ◽  
Mode Shapes ◽  
Response Analysis ◽  
Transient Vibration ◽  
Bladed Disks ◽  
Bladed Disk

Abstract During fast gas-turbine engine acceleration and deceleration the transient vibration effects in bladed disk vibration become significant and the transient response has to be calculated. In this paper an effective method is developed for efficient calculations of the transient vibration response for mistuned bladed disks under varying rotation speeds. The method uses the large-scale finite element modelling of the bladed disks allowing the accurate description of the dynamic properties of the mistuned bladed disks. The effects of the varying rotation speed on the natural frequencies and mode shapes of a mistuned bladed disk and its effects on the amplitude and the spectral composition of the loading are considered. The dependency of the modal characteristics on the rotation speed are based on the evaluation of these characteristics at reference points followed by the interpolation to obtain values at any rotation speed from the operating range. A new method has been developed for the interpolation of mode shapes while preserving the orthogonality and mass-normalization of the mode shapes. The method of mode shape interpolation is elaborated for tuned and mistuned bladed disks. The accuracy and efficiency of the method is demonstrated on test examples and on analysis of transient forced response of realistic bladed discs.

scholarly journals Identification of Mistuning Characteristics of Bladed Disks From Free Response Data

1998 ◽  
Author(s):  
Marc P. Mignolet ◽  
Alejandro Rivas-Guerra
Keyword(s):  
Dynamic Models ◽  
Natural Frequencies ◽  
Dynamic Properties ◽  
Structural Parameters ◽  
Identification Problem ◽  
Forced Response ◽  
Mode Shapes ◽  
Likelihood Principle ◽  
Bladed Disks ◽  
Block Test

The focus of the present investigation is on the estimation of the dynamic properties, i.e. masses, stiffnesses, natural frequencies, mode shapes and their statistical distributions, of turbomachine blades to be used in the accurate prediction of the forced response of mistuned bladed disks. As input to this process, it is assumed that the lowest natural frequencies of the blades alone have been experimentally measured, for example in a broach block test. Since the number of measurements is always less than the number of unknowns, this problem is indeterminate in nature. Two distinct approaches will be investigated to resolve the shortfall of data. The first one relies on the imposition of as many constraints as needed to insure a unique solution to this identification problem. Specifically, the mode shapes and modal masses of the blades are set to their design/tuned counterparts while the modal stiffnesses are varied from blade-to-blade to match the measured natural frequencies. The second approach, based on the maximum likelihood principle, yields estimates of all the structural parameters of the blades through the minimization of a specified “cost function”. The accuracy of these two techniques in predicting the forced response of mistuned bladed disks will be assessed on simple dynamic models of the blades.

Investigation of Damping Potential of Strip Damper on a Real Turbine Blade

2016 ◽  
Author(s):  
M. Afzal ◽  
I. Lopez Arteaga ◽  
L. Kari ◽  
V. Kharyton
Keyword(s):  
Boundary Conditions ◽  
Dynamic Properties ◽  
Equations Of Motion ◽  
Iterative Solution ◽  
Element Model ◽  
Forced Response ◽  
Contact Forces ◽  
Response Analysis ◽  
Bladed Disk ◽  
Different Types

This paper investigates the damping potential of strip dampers on a real turbine bladed disk. A 3D numerical friction contact model is used to compute the contact forces by means of the Alternate Frequency Time domain method. The Jacobian matrix required during the iterative solution is computed in parallel with the contact forces, by a quasi-analytical method. A finite element model of the strip dampers, that allows for an accurate description of their dynamic properties, is included in the steady-state forced response analysis of the bladed disk. Cyclic symmetry boundary conditions and the multiharmonic balance method are applied in the formulation of the equations of motion in the frequency domain. The nonlinear forced response analysis is performed with two different types of boundary conditions on the strip: (a) free-free and (b) elastic, and their influence is analyzed. The effect of the strip mass, thickness and the excitation levels on the forced response curve is investigated in detail.

Transient Forced Response Analysis of Mistuned Steam Turbine Blades During Startup and Coastdown

2016 ◽  
Vol 139 (1) ◽  
Author(s):  
Christian Siewert ◽  
Heinrich Stüer
Keyword(s):  
Mechanical Model ◽  
Turbine Blades ◽  
Forced Vibrations ◽  
Forced Response ◽  
The Self ◽  
Response Analysis ◽  
Computationally Efficient ◽  
Bladed Disk ◽  
Steam Turbine Blades ◽  
Number Of Publications

It is well known that the vibrational behavior of a mistuned bladed disk differs strongly from that of a tuned bladed disk. A large number of publications dealing with the dynamics of mistuned bladed disks are available in the literature. The vibrational phenomena analyzed in these publications are either forced vibrations or self-excited flutter vibrations. Nearly, all published literature on the forced vibrations of mistuned blades disks considers harmonic, i.e., steady-state, vibrations, whereas the self-excited flutter vibrations are analyzed by the evaluation of the margin against instabilities by means of a modal, or rather than eigenvalue, analysis. The transient forced response of mistuned bladed disk is not analyzed in detail so far. In this paper, a computationally efficient mechanical model of a mistuned bladed disk to compute the transient forced response is presented. This model is based on the well-known fundamental model of mistuning (FMM). With this model, the statistics of the transient forced response of a mistuned bladed disk is analyzed and compared to the results of harmonic forced response analysis.

Experimental Investigation of Mode Localization and Forced Response Amplitude Magnification for a Mistuned Bladed Disk

2000 ◽  
Author(s):  
John Judge ◽  
Christophe Pierre ◽  
Oral Mehmed
Keyword(s):  
Experimental Investigation ◽  
Traveling Wave ◽  
Forced Response ◽  
Response Amplitude ◽  
Mode Shapes ◽  
Bladed Disks ◽  
Element Analysis ◽  
Mode Localization ◽  
Bladed Disk ◽  
Out Of Plane

The results of an experimental investigation on the effects of random blade mistuning on the forced dynamic response of bladed disks are reported. The primary aim of the experiment is to gain understanding of the phenomena of mode localization and forced response blade amplitude magnification in bladed disks. A stationary, nominally periodic, twelve-bladed disk with simple geometry is subjected to a traveling-wave, out-of-plane, “engine order” excitation delivered via phase-shifted control signals sent to piezo-electric actuators mounted on the blades. The bladed disk is then mistuned by the addition of small, unequal weights to the blade tips, and it is again subjected to a traveling wave excitation. The experimental data is used to verify analytical predictions about the occurrence of localized mode shapes, increases in forced response amplitude, and changes in resonant frequency due to the presence of mistuning. Very good agreement between experimental measurements and finite element analysis is obtained. The out-of-plane response is compared and contrasted with the previously reported in-plane mode localization behavior of the same test specimen. This work also represents an important extension of previous experimental study by investigating a frequency regime in which modal density is lower but disk-blade interaction is significantly greater.

Transient Forced Response Analysis of Mistuned Steam Turbine Blades During Start-Up and Coast-Down

2014 ◽  
Author(s):  
Christian Siewert ◽  
Heinrich Stüer
Keyword(s):  
Mechanical Model ◽  
Turbine Blades ◽  
Forced Vibrations ◽  
Forced Response ◽  
Response Analysis ◽  
Computationally Efficient ◽  
Bladed Disk ◽  
Start Up ◽  
Steam Turbine Blades ◽  
Number Of Publications

It is well-known that the vibrational behavior of a mistuned bladed disk differs strongly from that of a tuned bladed disk. A large number of publications dealing with the dynamics of mistuned bladed disks is available in the literature. The vibrational phenomena analyzed in these publications are either forced vibrations or self-excited flutter vibrations. Nearly all published literature on the forced vibrations of mistuned blades disks considers harmonic, i. e. steady-state, vibrations, whereas the self-excited flutter vibrations are analyzed by the evaluation of the margin against instabilities by means of a modal, or rather than eigenvalue, analysis. The transient forced response of mistuned bladed disk is not analyzed in detail so far. In this paper, a computationally efficient mechanical model of a mistuned bladed disk to compute the transient forced response is presented. This model is based on the well-known Fundamental Model of Mistuning. With this model, the statistics of the transient forced response of a mistuned bladed disk is analyzed and compared to the results of harmonic forced response analysis.

Sign in / Sign up

Export Citation Format

Share Document