scholarly journals A Novel Three-Loop Parallel Robot With Full Mobility: Kinematics, Singularity, Workspace, and Dexterity Analysis

2017 ◽  
Vol 9 (5) ◽  
Author(s):  
Wei Li ◽  
Jorge Angeles
Keyword(s):  
High Speed ◽  
Screw Theory ◽  
Parallel Robot ◽  
Simple Expression ◽  
Parallel Robots ◽  
Forward Displacement ◽  
Design Variables ◽  
The Subject ◽  
Stewart Gough Platform ◽  
The Given

A novel parallel robot, dubbed the SDelta, is the subject of this paper. SDelta is a simpler alternative to both the well-known Stewart–Gough platform (SGP) and current three-limb, full-mobility parallel robots, as it contains fewer components and all its motors are located on the base. This reduces the inertial load on the system, making it a good candidate for high-speed operations. SDelta features a symmetric structure; its forward-displacement analysis leads to a system of three quadratic equations in three unknowns, which admits up to eight solutions, or half the number of those admitted by the SGP. The kinematic analysis, undertaken with a geometrical method based on screw theory, leads to two Jacobian matrices, whose singularity conditions are investigated. Instead of using the determinant of a 6 × 6 matrix, we derive one simple expression that characterizes the singularity condition. This approach is also applicable to a large number of parallel robots whose six actuation wrench axes intersect pairwise, such as all three-limb parallel robots whose limbs include, each, a passive spherical joint. The workspace is analyzed via a geometric method, while the dexterity analysis is conducted via discretization. Both show that the given robot has the potential to offer both large workspace and good dexterity with a proper choice of design variables.

Modelling and Simulation of a Isoglide T3R1 Parallel Robot

2010 ◽  
Vol 166-167 ◽  
pp. 457-462
Author(s):  
Dan Verdes ◽  
Radu Balan ◽  
Máthé Koppány
Keyword(s):  
High Speed ◽  
Degrees Of Freedom ◽  
Parallel Robot ◽  
Parallel Robots ◽  
Practical Implementation ◽  
Medical Robots ◽  
The Past ◽  
And Control ◽  
Workspace Design ◽  
Human Systems

Parallel robots find many applications in human-systems interaction, medical robots, rehabilitation, exoskeletons, to name a few. These applications are characterized by many imperatives, with robust precision and dynamic workspace computation as the two ultimate ones. This paper presents kinematic analysis, workspace, design and control to 3 degrees of freedom (DOF) parallel robots. Parallel robots have received considerable attention from both researchers and manufacturers over the past years because of their potential for high stiffness, low inertia and high speed capability. Therefore, the 3 DOF translation parallel robots provide high potential and good prospects for their practical implementation in human-systems interaction.

Experimental validation on the integrated design and control of a parallel robot

Robotica ◽  
2005 ◽  
Vol 24 (2) ◽  
pp. 173-181 ◽  
Author(s):  
Qing Li
Keyword(s):  
Dynamic Model ◽  
High Speed ◽  
Dynamic Models ◽  
Integrated Design ◽  
Parallel Robot ◽  
Parallel Robots ◽  
Approximation Techniques ◽  
Control Approach ◽  
Modeling Errors ◽  
And Control

Due to the demands from the robotic industry, robot structures have evolved from serial to parallel. The control of parallel robots for high performance and high speed tasks has always been a challenge to control engineers. Following traditional control engineering approaches, it is possible to design advanced algorithms for parallel robot control. These approaches, however, may encounter problems such as heavy computational load and modeling errors, to name it a few. To avoid heavy computation, simplified dynamic models can be obtained by applying approximation techniques, nevertheless, performance accuracy will suffer due to modeling errors. This paper suggests applying an integrated design and control approach, i.e., the Design For Control (DFC) approach, to handle this problem. The underlying idea of the DFC approach can be illustrated as follows: Intuitively, a simple control algorithm can control a structure with a simple dynamic model quite well. Therefore, no matter how sophisticate a desired motion task is, if the mechanical structure is designed such that it results in a simple dynamic model, then, to design a controller for this system will not be a difficult issue. As such, complicated control design can be avoided, on-line computation load can be reduced and better control performance can be achieved. Through out the discussion in the paper, a 2 DOF parallel robot is redesigned based on the DFC concept in order to obtain a simpler dynamic model based on a mass-balancing method. Then a simple PD controller can drive the robot to achieve accurate point-to-point tracking tasks. Theoretical analysis has proven that the simple PD control can guarantee a stable system. Experimental results have successfully demonstrated the effectiveness of this integrated design and control approach.

Type synthesis of coordinated multi-robot system based on parallel thought

2018 ◽  
Vol 42 (2) ◽  
pp. 164-176 ◽  
Author(s):  
Wanqiang Xi ◽  
Bai Chen ◽  
Yaoyao Wang ◽  
Feng Ju
Keyword(s):  
Degrees Of Freedom ◽  
Screw Theory ◽  
Parallel Robot ◽  
Parallel Robots ◽  
Type Synthesis ◽  
World Coordinate System ◽  
Coordination System ◽  
Branched Chain ◽  
Branched Chains ◽  
Multi Robot

For the synthesis of the required type about the multi-robot coordination system in industrial transportation, this paper presents a novel method in which each robot in the coordinated task is viewed as a branched chain of an equivalent parallel robot (EPR), which is converted into a problem for type synthesis of parallel robots. A theoretic method is proposed to represent the kinematic features of the mechanism’s end-effector and its position and pose in the world coordinate system. The basic concept of a robotic characteristic (C) set is given, and the corresponding algorithm is analyzed. Based on the theory of C set, the concrete steps for type synthesis of EPR are presented by analyzing the characteristics of its branched chains, and many EPR groups with end kinematic features for the C sets of the operational tasks are obtained. Then three translational (3T) operational requirements that can be extended to other degrees of freedom (DOF) are adopted, and the DOF of homogeneous and heterogeneous EPR are analyzed using screw theory. Finally the validation of the method is demonstrated by Adams, which shows that the two groups are able to complete the task.

Real-Time Validation and Control Environment for Parallel Robot Control Design

2011 ◽  
Author(s):  
A. Zubizarreta ◽  
E. Portillo ◽  
I. Cabanes ◽  
M. Marcos ◽  
Ch. Pinto
Keyword(s):  
High Speed ◽  
High Performance ◽  
Experimental Testing ◽  
Control Design ◽  
Parallel Robot ◽  
Parallel Robots ◽  
Full Potential ◽  
Control Environment ◽  
High Level ◽  
And Control

Due to their high performance when executing high-speed and accurate tasks, parallel robots have became the focus of many researchers and companies. However, exploiting the full potential of these robots requires a correct mechatronic design, in which the designed mechanism has to be controlled by a suitable control law in order to achieve the maximum performance. In this paper a novel Validation and Control Environment (VALIDBOT) is proposed as a support for the control design and experimental testing stages of these robots. The proposed open and flexible environment is designed to meet rapid prototyping requirements, offering a high level framework for both students and researchers. The capabilities of the environment are illustrated with an application case based on a 5R parallel robot prototype in which a modified CTC controller is tested.

DeltaBot: A New Cable-Based Ultra High Speed Robot

2003 ◽  
Author(s):  
Saeed Behzadipour ◽  
Robert Dekker ◽  
Amir Khajepour ◽  
Edmon Chan
Keyword(s):  
High Speed ◽  
Degrees Of Freedom ◽  
Manufacturing Industry ◽  
Design Procedure ◽  
Parallel Manipulators ◽  
Parallel Robot ◽  
Parallel Robots ◽  
Manufacturing Cost ◽  
End Effector ◽  
Serial Manipulators

The growing needs for high speed positioning devices in the automated manufacturing industry have been challenged by robotic science for more than two decades. Parallel manipulators have been widely used for this purpose due to their advantage of lower moving inertia over the conventional serial manipulators. Cable actuated parallel robots were introduced in 1980’s to reduce the moving inertia even further. In this work, a new cable-based parallel robot is introduced. For this robot, the cables are used not only to actuate the end-effector but also to apply the necessary kinematic constraints to provide three pure translational degrees of freedom. In order to maintain tension in the cables, a passive air cylinder is used to push the end-effector against the stationary platform. In addition to low moving inertia, the new design benefits from simplicity and low manufacturing cost by eliminating joints from the robot’s mechanism. The design procedure and the results of experiments will be discussed in the following.

Kinematic uncertainty analysis of a cable-driven parallel robot based on an error transfer model

2021 ◽  
pp. 1-23
Author(s):  
Jun Gao ◽  
Bin Zhou ◽  
Bin Zi ◽  
Sen Qian ◽  
Ping Zhao
Keyword(s):  
Uncertainty Analysis ◽  
Kinematic Model ◽  
Evidence Theory ◽  
Parallel Robot ◽  
Fast Response ◽  
Inverse Kinematic ◽  
Parallel Robots ◽  
Transfer Model ◽  
The Given ◽  
Error Transfer

Abstract Cable-driven parallel robots (CDPRs) are a kind of mechanism with large workspace, fast response, and low inertia. However, due to the existence of fixed pulleys, it is unavoidable to bring uncertain cable lengths and lead to pose errors of the end-effector (EE). The inverse kinematic model of a CDPR for picking up medicines is established by considering radii of fixed pulleys. The influence of radii of fixed pulleys on errors of cable lengths is explored. Error transfer model of the CPDR is constructed, and uncertain sources of cable lengths are analyzed. Based on evidence theory and error transfer model, an evidence theory-based uncertainty analysis method (ETUAM) is presented. The structural performance function for kinematic response is derived based on error transfer model. Belief and plausibility measures of joint focal elements under the given threshold are obtained. Kinematic error simulations show that errors of cable lengths become larger with the increase of radii of fixed pulleys. Compared with the vertex method and Monte Carlo method, numerical examples demonstrate the accuracy and efficiency of the ETUAM when it comes to the kinematic uncertainty analysis of the CDPR.

Dynamic Analysis of a Parallel Pick-and-Place Robot With Flexible Links

2008 ◽  
Author(s):  
Haihong Li ◽  
Zhiyong Yang
Keyword(s):  
High Speed ◽  
Dynamic Performance ◽  
Lithium Ion ◽  
Parallel Robot ◽  
Parallel Robots ◽  
Modeling And Analysis ◽  
Flexible Links ◽  
Pick And Place ◽  
Floating Frame ◽  
Pick And Place Operation

The dynamic modeling and analysis of a 2-DOF translational parallel robot for high-speed pick-and-place operation was presented. Considering the flexibility of all links, the governing equation of motion of a flexible link is formulated in the floating frame of reference using Euler-Lagrange method. A kineto-elasto dynamic model of the system is achieved, ready for modal analysis. Simulation in FEM software showed the similar modes with above computational result in typical location and rotation. The dynamic experiment presented the dominant modes and proved the theoretical analysis and simulation. The Diamond robot used in Lithium-ion battery sorting was taken as an example to demonstrate how to finish above studies. The result shows that the mechanism has good dynamic performance. The work is available for all parallel robots with flexible links.

scholarly journals A hierarchical approach for rigid-body dynamics model simplification of a high-speed parallel robot by considering kinematics performance

2021 ◽  
Vol 104 (4) ◽  
pp. 003685042110630
Author(s):  
Jinlu Ni ◽  
Jiangping Mei ◽  
Weizhong Hu
Keyword(s):  
Rigid Body ◽  
Trajectory Planning ◽  
High Speed ◽  
Parallel Robot ◽  
Parallel Robots ◽  
Rigid Body Dynamics ◽  
Model Simplification ◽  
Hierarchical Approach ◽  
Dynamics Model ◽  
Body Dynamics

Considering the real-time control of a high-speed parallel robot, a concise and precise dynamics model is essential for the design of the dynamics controller. However, the complete rigid-body dynamics model of parallel robots is too complex for online calculation. Therefore, a hierarchical approach for dynamics model simplification, which considers the kinematics performance, is proposed in this paper. Firstly, considering the motion smoothness of the end-effector, trajectory planning based on the workspace discretization is carried out. Then, the effects of the trajectory parameters and acceleration types on the trajectory planning are discussed. But for the fifth-order and seventh-order B-spline acceleration types, the trajectory will generate excessive deformation after trajectory planning. Therefore, a comprehensive index that considers both the motion smoothness and trajectory deformation is proposed. Finally, the dynamics model simplification method based on the combined mass distribution coefficients is studied. Results show that the hierarchical approach can guarantee both the excellent kinematics performance of the parallel robot and the accuracy of the simplified dynamics model under different trajectory parameters and acceleration types. Meanwhile, the method proposed in the paper can be applied to the design of the dynamics controller to enhance the robot's performance.

Technology-Oriented Synchronous Optimal Design of a 4-Degrees-of-Freedom High-Speed Parallel Robot

2020 ◽  
Vol 142 (10) ◽  
Author(s):  
Gang Han ◽  
Fugui Xie ◽  
Xin-Jun Liu ◽  
Qizhi Meng ◽  
Sai Zhang
Keyword(s):  
Optimal Design ◽  
Parameter Optimization ◽  
High Speed ◽  
Degrees Of Freedom ◽  
Interaction Mechanism ◽  
Optimization Method ◽  
Parallel Robot ◽  
Parallel Robots ◽  
Parameters Optimization ◽  
Nonlinear Design

Abstract Parameters optimization is complicated by various parameters and nonlinear design problems. In this paper, the interaction mechanism of motion/force transmissibility and various parameters on normalized motor torque and speed of a four degrees-of-freedom (4-DOF) high-speed parallel robot is analyzed. Based on this interaction mechanism, evaluation indices of acceleration capacity, speed ability, and adept cycle time are proposed. Through combining these indices with task requirements and technical criteria of driving systems, the technology-oriented constraints are set up and a parameter optimization method is proposed. With this method, the dimensional parameters, driving system specifications, and work pose of the robot have been synchronously optimized to ensure low driving torque and high pick-and-place frequency. This synchronous optimal design method is general and can be further applied to parameter optimization for different types of parallel robots.

Investigation on the Vibration of High Speed Cable Robot Manipulation due to Tension Around Drum

2019 ◽  
Author(s):  
Jinwoo Jung ◽  
Jinlong Piao ◽  
Eunpyo Choi ◽  
Jong-Oh Park ◽  
Chang-Sei Kim
Keyword(s):  
High Speed ◽  
Parallel Robot ◽  
Parallel Robots ◽  
Rigid Base ◽  
Robot System ◽  
Vibration Problem ◽  
Cable Robot ◽  
Pick And Place ◽  
Flexible Cables ◽  
Pick And Place Operation

Abstract A cable-driven parallel robot (CDPR) consists of an end-effector, flexible lightweight cables, pulleys, winches, and a rigid base frame. As opposed to the rigid links of the traditional serial robots and parallel robots, the flexible lightweight cables allow the CDPR to easily achieve the high speed, heavy payload manipulation, and scalable workspace. Especially, the conventional high-speed pick and place operation can be realized due to the lightweight of its flexible cables. However, the flexibility of the lightweight cables can introduce a considerable vibration problem to the high speed cable robot system. One of main causes can be a cable tension difference between initial pre-tension and winding tension around a drum of the winch-motor actuator. To effectively investigate the effect of the tension around the drum on the high speed manipulation of the cable robot system, the spatial eight-cable high speed cable robot was reduced to the horizontal two cable system. The reduction of the number of the cable enables us to minimize the influences from the other factors such as the cable sagging and the geometric errors. A series of experiments was conducted using the combinations of the low and high initial pre-tensions and low and high tensions around the drum. The experimental results clearly show that the low tension around the drum can cause the vibration problem during the high speed pick and place operation. Also, it demonstrates that securing the drum tension similar to the initial pre-tension can effectively reduce the magnitude of the vibration.

Sign in / Sign up

Export Citation Format

Share Document