scholarly journals Kinematics, Workspace, and Singularity Analysis of a Parallel Robot With Five Operation Modes

2018 ◽  
Vol 10 (3) ◽  
Author(s):  
Damien Chablat ◽  
Xianwen Kong ◽  
Chengwei Zhang
Keyword(s):  
Degrees Of Freedom ◽  
Rotation Axis ◽  
Operation Mode ◽  
Parallel Robot ◽  
Joint Space ◽  
Singularity Analysis ◽  
Parallel Robots ◽  
Operation Modes ◽  
Serial Chain ◽  
Kinematic Study

Most multimode parallel robots can change operation modes by passing through constraint singularities. This paper deals with a comprehensive kinematic study of a three degrees-of-freedom (DOF) multimode three-PRPiR parallel robot developed at Heriot-watt University. This robot is able to reach several operation modes without crossing any constraint singularity by using lockable Pi and R joints. Here, a Pi joint may act as a 1DOF planar parallelogram if its lockable P (prismatic) joint is locked or a 2DOF RR serial chain if its lockable P joint is released. The operation modes of the robot include a 3T operation mode and four 2T1R operation modes with two different directions of the rotation axis of the moving platform. The inverse kinematics and forward kinematics of the robot in each operation mode are dealt with in detail. The joint space and workspace analysis of the robot allow us to know the regions of the workspace that the robot can reach in each operation mode. It is shown that the robot is able to change assembly mode in one operation mode by passing through another operation mode.

scholarly journals Kinematics, Workspace and Singularity Analysis of a Multi-Mode Parallel Robot

2017 ◽  
Author(s):  
Damien Chablat ◽  
Xianwen Kong ◽  
Chengwei Zhang
Keyword(s):  
Rotation Axis ◽  
Operation Mode ◽  
Parallel Robot ◽  
Singularity Analysis ◽  
Parallel Robots ◽  
Revolute Joints ◽  
Operation Modes ◽  
Serial Chain ◽  
Motion Modes ◽  
Workspace Analysis

A family of reconfigurable parallel robots can change motion modes by passing through constraint singularities by locking and releasing some passive joints of the robot. This paper is about the kinematics, the workspace and singularity analysis of a 3-PRPiR parallel robot involving lockable Pi and R (revolute) joints. Here a Pi joint may act as a 1-DOF planar parallelogram if its lockable P (prismatic) joint is locked or a 2-DOF RR serial chain if its lockable P joint is released. The operation modes of the robot include a 3T operation modes to three 2T1R operation modes with two different directions of the rotation axis of the moving platform. The inverse kinematics and forward kinematics of the robot in each operation modes are dealt with in detail. The workspace analysis of the robot allow us to know the regions of the workspace that the robot can reach in each operation mode. A prototype built at Heriot-Watt University is used to illustrate the results of this work.

Numerical Framework and Design Optimization of an Intrinsically Compliant 3-DOF Parallel Robot

2020 ◽  
Vol 21 (2) ◽  
Author(s):  
Shahid Hussain ◽  
Prashant K. Jamwal ◽  
Akim Kapsalyamov ◽  
Mergen H. Ghayesh
Keyword(s):  
Degrees Of Freedom ◽  
Parallel Robot ◽  
Singularity Analysis ◽  
Parallel Robots ◽  
Simultaneous Optimization ◽  
Design Synthesis ◽  
Pneumatic Muscle ◽  
Nonlinear Motion ◽  
Strength Pareto Evolutionary Algorithm ◽  
Muscle Actuators

Abstract Parallel robots are multiple degrees of freedom (DOFs) systems that are typically used in applications characterized by enhanced accuracy, rigidity, and large force requirements within a compact workspace. In the present research, an intrinsically compliant parallel robot with 3-DOFs, actuated using four pneumatic muscle actuators (PMA), is conceptualized, developed, and analyzed. Despite many benefits, parallel robots also offer certain challenges that arise from the highly coupled and nonlinear motion of their actuators. The small workspace of parallel robots has many singularities and solving a closed-form forward kinematics (FK) for its end-effector motion is complicated. The PMAs can provide intrinsically compliant robotic motions, however, since they are flexible, their unilateral actuation also poses constraints on the achievable DOFs. The present research focuses on analyzing kinematics and dynamics of the developed parallel robot incorporating the stiffness together with force closure analyses besides suggesting design improvements as a consequence of the singularity analysis. Design synthesis and multi-criteria optimization have been performed to obtain a robot design which may provide higher accuracies (near unity condition number), quick response to external wrench (stiffness and rigidity), and reduced actuator force requirements. SPEA2 (Improved Strength Pareto Evolutionary Algorithm) has been implemented to carry out the simultaneous optimization of design objectives and provide Pareto optimal design solutions.

scholarly journals An Algebraic Method to Check the Singularity-Free Paths for Parallel Robots

2015 ◽  
Author(s):  
R. Jha ◽  
D. Chablat ◽  
F. Rouillier ◽  
G. Moroz
Keyword(s):  
Degrees Of Freedom ◽  
Complex Shape ◽  
Algebraic Method ◽  
Parallel Manipulators ◽  
Parallel Robot ◽  
Joint Space ◽  
Parallel Robots ◽  
Singular Configuration ◽  
End Effectors ◽  
Three Degrees Of Freedom

Trajectory planning is a critical step while programming the parallel manipulators in a robotic cell. The main problem arises when there exists a singular configuration between the two poses of the end-effectors while discretizing the path with a classical approach. This paper presents an algebraic method to check the feasibility of any given trajectories in the workspace. The solutions of the polynomial equations associated with the trajectories are projected in the joint space using Gröbner based elimination methods and the remaining equations are expressed in a parametric form where the articular variables are functions of time t unlike any numerical or discretization method. These formal computations allow to write the Jacobian of the manipulator as a function of time and to check if its determinant can vanish between two poses. Another benefit of this approach is to use a largest workspace with a more complex shape than a cube, cylinder or sphere. For the Orthoglide, a three degrees of freedom parallel robot, three different trajectories are used to illustrate this method.

A learning-based control framework for cable-driven parallel robots with unknown Jacobians

2020 ◽  
Vol 234 (9) ◽  
pp. 1024-1036
Author(s):  
Hao Xiong ◽  
Lin Zhang ◽  
Xiumin Diao
Keyword(s):  
Neural Network ◽  
Control Strategy ◽  
Degrees Of Freedom ◽  
Inverse Dynamics ◽  
Parallel Robot ◽  
Joint Space ◽  
Parallel Robots ◽  
The Neural Network ◽  
Control Framework ◽  
In Series

Cable-driven parallel robots have been studied by many researchers in the past decades. The Jacobian of a cable-driven parallel robot may not be determined in some applications such as rehabilitation. In order to control the pose of a fully constrained cable-driven parallel robot with unknown Jacobian and driven by torque-controlled actuators, a learning-based control framework consisting of a robust controller and a neural network in series is proposed in this article. The neural network takes over the role of the Jacobian by mapping a wrench applied on the end-effector of the cable-driven parallel robot at a pose in the task space to a set of cable tensions in the joint space. In this way, the cable-driven parallel robot can be controlled by cable tensions derived from such a mapping, rather than solving the inverse dynamics problem based on the Jacobian. As an example, a control strategy is developed to demonstrate how the proposed control framework works. The control strategy includes a proportional–integral–derivative controller and a feedforward neural network. Simulation results show that the control strategy can successfully control a cable-driven parallel robot with four cables, three degrees of freedom, and unknown Jacobian.

Modelling and Simulation of a Isoglide T3R1 Parallel Robot

2010 ◽  
Vol 166-167 ◽  
pp. 457-462
Author(s):  
Dan Verdes ◽  
Radu Balan ◽  
Máthé Koppány
Keyword(s):  
High Speed ◽  
Degrees Of Freedom ◽  
Parallel Robot ◽  
Parallel Robots ◽  
Practical Implementation ◽  
Medical Robots ◽  
The Past ◽  
And Control ◽  
Workspace Design ◽  
Human Systems

Parallel robots find many applications in human-systems interaction, medical robots, rehabilitation, exoskeletons, to name a few. These applications are characterized by many imperatives, with robust precision and dynamic workspace computation as the two ultimate ones. This paper presents kinematic analysis, workspace, design and control to 3 degrees of freedom (DOF) parallel robots. Parallel robots have received considerable attention from both researchers and manufacturers over the past years because of their potential for high stiffness, low inertia and high speed capability. Therefore, the 3 DOF translation parallel robots provide high potential and good prospects for their practical implementation in human-systems interaction.

Type synthesis of coordinated multi-robot system based on parallel thought

2018 ◽  
Vol 42 (2) ◽  
pp. 164-176 ◽  
Author(s):  
Wanqiang Xi ◽  
Bai Chen ◽  
Yaoyao Wang ◽  
Feng Ju
Keyword(s):  
Degrees Of Freedom ◽  
Screw Theory ◽  
Parallel Robot ◽  
Parallel Robots ◽  
Type Synthesis ◽  
World Coordinate System ◽  
Coordination System ◽  
Branched Chain ◽  
Branched Chains ◽  
Multi Robot

For the synthesis of the required type about the multi-robot coordination system in industrial transportation, this paper presents a novel method in which each robot in the coordinated task is viewed as a branched chain of an equivalent parallel robot (EPR), which is converted into a problem for type synthesis of parallel robots. A theoretic method is proposed to represent the kinematic features of the mechanism’s end-effector and its position and pose in the world coordinate system. The basic concept of a robotic characteristic (C) set is given, and the corresponding algorithm is analyzed. Based on the theory of C set, the concrete steps for type synthesis of EPR are presented by analyzing the characteristics of its branched chains, and many EPR groups with end kinematic features for the C sets of the operational tasks are obtained. Then three translational (3T) operational requirements that can be extended to other degrees of freedom (DOF) are adopted, and the DOF of homogeneous and heterogeneous EPR are analyzed using screw theory. Finally the validation of the method is demonstrated by Adams, which shows that the two groups are able to complete the task.

Type Synthesis of Variable Degrees-of-Freedom Parallel Manipulators With Both Planar and 3T1R Operation Modes

2012 ◽  
Author(s):  
Xianwen Kong
Keyword(s):  
Degrees Of Freedom ◽  
Operation Mode ◽  
Parallel Manipulators ◽  
Type Synthesis ◽  
Operation Modes ◽  
Moving Platform ◽  
Multiple Operation ◽  
Schönflies Motion

Parallel manipulators (PMs) with multiple operation modes are novel reconfigurable PMs which use less number of actuators and can be reconfigured without disassembly. Although several classes of PMs with multiple operation modes that have the same DOF (degrees-of-freedom) in all the operation modes have been proposed, only one class of variable-DOF PMs with multiple operation modes — PMs with multiple operation modes that do not have the same DOF in all the operation modes — have been proposed so far. This paper deals with the type synthesis of variable-DOF PMs with both planar and 3T1R (or Schönflies motion which has three translational DOF and 1 rotational DOF) operation modes. The axes of rotation of the moving platform in the planar operation mode are not parallel to the axes of rotation of the moving platform in the 3T1R operation mode. At first, an approach to the type synthesis of PMs with multiple operation modes is recalled. Based on the results on the type synthesis of planar PMs and 3T1R PMs, the types of variable-DOF PMs with both planar and 3T1R operation modes are then obtained. This work can be extended to the type synthesis of other classes of PMs with multiple operation modes.

Singularity analysis of two-legged planar parallel robots with three degrees of freedom

2016 ◽  
Vol 232 (4) ◽  
pp. 657-664 ◽  
Author(s):  
Mustafa Özdemir
Keyword(s):  
Degrees Of Freedom ◽  
Singularity Analysis ◽  
Parallel Robots ◽  
Design Concept ◽  
Type I ◽  
Numerical Examples ◽  
Three Degrees Of Freedom

Planar two-legged parallel robots with three degrees of freedom have been suggested in the literature as a solution to reduce the leg interference problem of their conventional three-legged counterparts, and since then have attracted considerable attention. This paper presents a singularity analysis of these robots. Three alternatives, namely the robots with 2-RRR, 2-RPR, and 2-PRR structures are considered. Type I, II, and III singularity conditions are obtained taking into account all possible actuation schemes. Several singularity-free actuation schemes are enumerated and discussed. The performed analysis also shows that adjustable designs are possible for manipulators with 2-PRR structures to have singularity-free operation. The proposed design concept and its effectiveness are illustrated through numerical examples.

Experimental results for the flexible joint cable-suspended manipulator of ICaSbot

Robotica ◽  
2013 ◽  
Vol 31 (6) ◽  
pp. 887-904 ◽  
Author(s):  
M. H. Korayem ◽  
M. Bamdad ◽  
H. Tourajizadeh ◽  
A. H. Korayem ◽  
R. M. Zehtab ◽  
...  
Keyword(s):  
Degrees Of Freedom ◽  
Experimental Tests ◽  
Parallel Robot ◽  
Joint Space ◽  
End Effector ◽  
Flexible Joint ◽  
Cable Robot ◽  
Six Dof ◽  
And Control ◽  
Computed Torque

SUMMARYIn this paper, design, dynamic, and control of the motors of a spatial cable robot are presented considering flexibility of the joints. End-effector control in order to control all six spatial degrees of freedom (DOFs) of the system and motor control in order to control the joints flexibility are proposed here. Corresponding programing of its operation is done by formulating the kinematics and dynamics and also control of the robot. Considering the existence of gearboxes, flexibility of the joints is modeled in the feed-forward term of its controller to achieve better accuracy. A two sequential closed-loop strategy consisting of proportional derivative (PD) for linear actuators in joint space and computed torque method for nonlinear end-effector in Cartesian space is presented for further accuracy. Flexibility is estimated using modeling and simulation by MATLAB and SimDesigner. A prototype has been built and experimental tests have been done to verify the efficiency of the proposed modeling and controller as well as the effect of flexibility of the joints. The ICaSbot (IUST Cable-Suspended robot) is an under-constrained six-DOF parallel robot actuated by the aid of six suspended cables. An experimental test is conducted for the manufactured flexible joint cable robot of ICaSbot and the outputs of sensors are compared with simulation. The efficiency of the proposed schemes is demonstrated.

Singularity Analysis of a Plane-Symmetry 3-RPS Parallel Robot Based on Translational/Rotational Jacobian Matrices

2011 ◽  
Vol 121-126 ◽  
pp. 1590-1594
Author(s):  
Yan Shi ◽  
Hong Xin Yue ◽  
Yi Lu ◽  
Lian He Guo
Keyword(s):  
Jacobian Matrix ◽  
Parallel Robot ◽  
Singularity Analysis ◽  
Parallel Robots ◽  
New Method ◽  
Plane Symmetry ◽  
Jacobian Matrices ◽  
Different Types

Firstly, 3-DOF parallel robots were classified into different types from the view of moving form. A new method of analyzing the singularity of 3-DOF parallel robots was introduced, which is based on translational Jacobian matrix and rotational Jacobian matrix. The singularity of parallel robots with pure translational form and pure rotational form was introduced summarily. Secondly, the process of solving the plane-symmetry 3-RPS parallel robot with combined moving forms was focused on, through which translational Jacobian matrix and rotational Jacobian matrix were adopted. Finally, the solving results were compared with the axis-symmetry 3-RPS parallel robot, which showed more general singularity can be solved through the new method.

Sign in / Sign up

Export Citation Format

Share Document