scholarly journals Effect of Wall Elasticity on Hemodynamics and Wall Shear Stress in Patient-Specific Simulations in the Coronary Arteries

2019 ◽  
Vol 142 (2) ◽  
Author(s):  
Parastou Eslami ◽  
Justin Tran ◽  
Zexi Jin ◽  
Julia Karady ◽  
Romina Sotoodeh ◽  
...  
Keyword(s):  
Shear Stress ◽  
Wall Shear Stress ◽  
Cross Sections ◽  
Cardiac Cycle ◽  
Rigid Wall ◽  
Patient Specific ◽  
Elastic Model ◽  
Flow Solver ◽  
Wall Shear ◽  
Highly Correlated

Abstract Wall shear stress (WSS) has been shown to be associated with myocardial infarction (MI) and progression of atherosclerosis. Wall elasticity is an important feature of hemodynamic modeling affecting WSS calculations. The objective of this study was to investigate the role of wall elasticity on WSS, and justify use of either rigid or elastic models in future studies. Digital anatomic models of the aorta and coronaries were created based on coronary computed tomography angiography (CCTA) in four patients. Hemodynamics was computed in rigid and elastic models using a finite element flow solver. WSS in five timepoints in the cardiac cycle and time averaged wall shear stress (TAWSS) were compared between the models at each 3 mm subsegment and 4 arcs in cross sections along the centerlines of coronaries. In the left main (LM), proximal left anterior descending (LAD), left circumflex (LCX), and proximal right coronary artery (RCA) of the elastic model, the mean percent radial increase 5.95 ± 1.25, 4.02 ± 0.97, 4.08 ± 0.94, and 4.84 ± 1.05%, respectively. WSS at each timepoint in the cardiac cycle had slightly different values; however, when averaged over the cardiac cycle, there were negligible differences between the models. In both the subsegments (n = 704) and subarc analysis, TAWSS in the two models were highly correlated (r = 0.99). In investigation on the effect of coronary wall elasticity on WSS in CCTA-based models, the results of this study show no significant differences in TAWSS justifying using rigid wall models for future larger studies.

scholarly journals Characterizations and Correlations of Wall Shear Stress in Aneurysmal Flow

2015 ◽  
Vol 138 (1) ◽  
Author(s):  
Amirhossein Arzani ◽  
Shawn C. Shadden
Keyword(s):  
Blood Flow ◽  
Shear Stress ◽  
Wall Shear Stress ◽  
Patient Specific ◽  
Spatial Gradient ◽  
Abdominal Aortic ◽  
Wall Shear ◽  
Highly Correlated ◽  
Definition Of ◽  
Traditional Approaches

Wall shear stress (WSS) is one of the most studied hemodynamic parameters, used in correlating blood flow to various diseases. The pulsatile nature of blood flow, along with the complex geometries of diseased arteries, produces complicated temporal and spatial WSS patterns. Moreover, WSS is a vector, which further complicates its quantification and interpretation. The goal of this study is to investigate WSS magnitude, angle, and vector changes in space and time in complex blood flow. Abdominal aortic aneurysm (AAA) was chosen as a setting to explore WSS quantification. Patient-specific computational fluid dynamics (CFD) simulations were performed in six AAAs. New WSS parameters are introduced, and the pointwise correlation among these, and more traditional WSS parameters, was explored. WSS magnitude had positive correlation with spatial/temporal gradients of WSS magnitude. This motivated the definition of relative WSS gradients. WSS vectorial gradients were highly correlated with magnitude gradients. A mix WSS spatial gradient and a mix WSS temporal gradient are proposed to equally account for variations in the WSS angle and magnitude in single measures. The important role that WSS plays in regulating near wall transport, and the high correlation among some of the WSS parameters motivates further attention in revisiting the traditional approaches used in WSS characterizations.

scholarly journals Numerical modeling in arterial hemodynamics incorporating fluid-structure interaction and microcirculation

2021 ◽  
Vol 18 (1) ◽  
Author(s):  
Fan He ◽  
Lu Hua ◽  
Tingting Guo
Keyword(s):  
Numerical Modeling ◽  
Shear Stress ◽  
Wall Shear Stress ◽  
Fluid Structure Interaction ◽  
Rigid Wall ◽  
Fluid Structure ◽  
Structure Interaction ◽  
Arterial Hemodynamics ◽  
Wall Compliance ◽  
Wall Shear

Abstract Background The effects of arterial wall compliance on blood flow have been revealed using fluid-structure interaction in last decades. However, microcirculation is not considered in previous researches. In fact, microcirculation plays a key role in regulating blood flow. Therefore, it is very necessary to involve microcirculation in arterial hemodynamics. Objective The main purpose of the present study is to investigate how wall compliance affects the flow characteristics and to establish the comparisons of these flow variables with rigid wall when microcirculation is considered. Methods We present numerical modeling in arterial hemodynamics incorporating fluid-structure interaction and microcirculation. A novel outlet boundary condition is employed to prescribe microcirculation in an idealised model. Results The novel finding in this work is that wall compliance under the consideration of microcirculation leads to the increase of wall shear stress in contrast to rigid wall, contrary to the traditional result that wall compliance makes wall shear stress decrease when a constant or time dependent pressure is specified at an outlet. Conclusions This work provides the valuable study of hemodynamics under physiological and realistic boundary conditions and proves that wall compliance may have a positive impact on wall shear stress based on this model. This methodology in this paper could be used in real model simulations.

scholarly journals Wall shear stress gradient is independently associated with middle cerebral artery aneurysm development: a case-control CFD patient-specific study based on 77 patients

BMC Neurology ◽  
2021 ◽  
Vol 21 (1) ◽  
Author(s):  
Mikołaj Zimny ◽  
Edyta Kawlewska ◽  
Anna Hebda ◽  
Wojciech Wolański ◽  
Piotr Ładziński ◽  
...  
Keyword(s):  
Shear Stress ◽  
Wall Shear Stress ◽  
Middle Cerebral Artery ◽  
Cerebral Artery ◽  
Case Control ◽  
Independent Effect ◽  
Patient Specific ◽  
Aneurysm Formation ◽  
Wall Shear ◽  
Mca Aneurysm

Abstract Background Previously published computational fluid dynamics (CFD) studies regarding intracranial aneurysm (IA) formation present conflicting results. Our study analysed the involvement of the combination of high wall shear stress (WSS) and a positive WSS gradient (WSSG) in IA formation. Methods We designed a case-control study with a selection of 38 patients with an unruptured middle cerebral artery (MCA) aneurysm and 39 non-aneurysmal controls to determine the involvement of WSS, oscillatory shear index (OSI), the WSSG and its absolute value (absWSSG) in aneurysm formation based on patient-specific CFD simulations using velocity profiles obtained from transcranial colour-coded sonography. Results Among the analysed parameters, only the WSSG had significantly higher values compared to the controls (11.05 vs − 14.76 [Pa/mm], P = 0.020). The WSS, absWSSG and OSI values were not significantly different between the analysed groups. Logistic regression analysis identified WSS and WSSG as significant co-predictors for MCA aneurysm formation, but only the WSSG turned out to be a significant independent prognosticator (OR: 1.009; 95% CI: 1.001–1.017; P = 0.025). Significantly more patients (23/38) in the case group had haemodynamic regions of high WSS combined with a positive WSSG near the bifurcation apex, while in the control group, high WSS was usually accompanied by a negative WSSG (14/39). From the analysis of the ROC curve for WSSG, the area under the curve (AUC) was 0.654, with the optimal cut-off value −0.37 Pa/mm. The largest AUC was recognised for combined WSS and WSSG (AUC = 0.671). Our data confirmed that aneurysms tend to form near the bifurcation apices in regions of high WSS values accompanied by positive WSSG. Conclusions The development of IAs is determined by an independent effect of haemodynamic factors. High WSS impacts MCA aneurysm formation, while a positive WSSG mainly promotes this process.

scholarly journals Genetic correlates of wall shear stress in a patient-specific 3D-printed cerebral aneurysm model

2019 ◽  
Vol 11 (10) ◽  
pp. 999-1003 ◽  
Author(s):  
Michael R Levitt ◽  
Christian Mandrycky ◽  
Ashley Abel ◽  
Cory M Kelly ◽  
Samuel Levy ◽  
...  
Keyword(s):  
Endothelial Cells ◽  
Shear Stress ◽  
Wall Shear Stress ◽  
Cerebral Aneurysm ◽  
Cell Morphology ◽  
Patient Specific ◽  
Parent Vessel ◽  
3D Printed ◽  
Wall Shear ◽  
Dynamics Simulations

ObjectivesTo study the correlation between wall shear stress and endothelial cell expression in a patient-specific, three-dimensional (3D)-printed model of a cerebral aneurysm.Materials and methodsA 3D-printed model of a cerebral aneurysm was created from a patient’s angiogram. After populating the model with human endothelial cells, it was exposed to media under flow for 24 hours. Endothelial cell morphology was characterized in five regions of the 3D-printed model using confocal microscopy. Endothelial cells were then harvested from distinct regions of the 3D-printed model for mRNA collection and gene analysis via quantitative polymerase chain reaction (qPCR.) Cell morphology and mRNA measurement were correlated with computational fluid dynamics simulations.ResultsThe model was successfully populated with endothelial cells, which survived under flow for 24 hours. Endothelial morphology showed alignment with flow in the proximal and distal parent vessel and aneurysm neck, but disorganization in the aneurysm dome. Genetic analysis of endothelial mRNA expression in the aneurysm dome and distal parent vessel was compared with the proximal parent vessels. ADAMTS-1 and NOS3 were downregulated in the aneurysm dome, while GJA4 was upregulated in the distal parent vessel. Disorganized morphology and decreased ADAMTS-1 and NOS3 expression correlated with areas of substantially lower wall shear stress and wall shear stress gradient in computational fluid dynamics simulations.ConclusionsCreating 3D-printed models of patient-specific cerebral aneurysms populated with human endothelial cells is feasible. Analysis of these cells after exposure to flow demonstrates differences in both cell morphology and genetic expression, which correlate with areas of differential hemodynamic stress.

scholarly journals Effects of a Short-Term Left Ventricular Assist Device on Hemodynamics in a Heart Failure Patient-Specific Aorta Model: A CFD Study

2021 ◽  
Vol 12 ◽  
Author(s):  
Yu Wang ◽  
Junwei Wang ◽  
Jing Peng ◽  
Mingming Huo ◽  
Zhiqiang Yang ◽  
...  
Keyword(s):  
Shear Stress ◽  
Wall Shear Stress ◽  
Pressure Difference ◽  
Left Ventricular ◽  
Patient Specific ◽  
Short Term ◽  
Ventricular Assist ◽  
Left Ventricular Assist ◽  
Wall Shear ◽  
Hemodynamic Performance

Patients with heart failure (HF) or undergoing cardiogenic shock and percutaneous coronary intervention require short-term cardiac support. Short-term cardiac support using a left ventricular assist device (LVAD) alters the pressure and flows of the vasculature by enhancing perfusion and improving the hemodynamic performance for the HF patients. However, due to the position of the inflow and outflow of the LVAD, the local hemodynamics within the aorta is altered with the LVAD support. Specifically, blood velocity, wall shear stress, and pressure difference are altered within the aorta. In this study, computational fluid dynamics (CFD) was used to elucidate the effects of a short-term LVAD for hemodynamic performance in a patient-specific aorta model. The three-dimensional (3D) geometric models of a patient-specific aorta and a short-term LVAD, Impella CP, were created. Velocity, wall shear stress, and pressure difference in the patient-specific aorta model with the Impella CP assistance were calculated and compared with the baseline values of the aorta without Impella CP support. Impella CP support augmented cardiac output, blood velocity, wall shear stress, and pressure difference in the aorta. The proposed CFD study could analyze the quantitative changes in the important hemodynamic parameters while considering the effects of Impella CP, and provide a scientific basis for further predicting and assessing the effects of these hemodynamic signals on the aorta.

A Review On the Effect of Temporal Geometric Variations of the Coronary Arteries On the Wall Shear Stress and Pressure Drop

2021 ◽  
Author(s):  
Navid Freidoonimehr ◽  
Rey Chin ◽  
Anthony C. Zander ◽  
Maziar Arjomandi
Keyword(s):  
Shear Stress ◽  
Pressure Drop ◽  
Wall Shear Stress ◽  
Coronary Arteries ◽  
Cardiac Cycle ◽  
Temporal Variations ◽  
Hemodynamic Parameters ◽  
Clinical Environment ◽  
Cross Sectional ◽  
Wall Shear

Abstract Temporal variations of the coronary arteries during a cardiac cycle are defined as the superposition of the changes in the position, curvature, and torsion of the coronary artery axis markers and the variations in the lumen cross-sectional shape due to the distensible wall motion induced by the pulse pressure and contraction of the myocardium in a cardiac cycle. This review discusses whether the modelling the temporal variations of the coronary arteries is needed for the investigation of the hemodynamics specifically in time critical applications such as a clinical environment. The numerical modellings in the literature which model or disregard the temporal variations of the coronary arteries on the hemodynamic parameters are discussed. The results in the literature show that neglecting the effects of temporal geometric variations is expected to result in about 5\% deviation of the time-averaged pressure drop and wall shear stress values and also about 20\% deviation of the temporal variations of hemodynamic parameters, such as time-dependent wall shear stress and oscillatory shear index. This review study can be considered as a guide for the future studies to outline the conditions in which temporal variations of the coronary arteries can be neglected, while providing a reliable estimation of hemodynamic parameters.

scholarly journals An MRI-based method to register patient-specific wall shear stress data to histology

PLoS ONE ◽  
2019 ◽  
Vol 14 (6) ◽  
pp. e0217271 ◽  
Author(s):  
A. M. Moerman ◽  
K. Dilba ◽  
S. Korteland ◽  
D. H. J. Poot ◽  
S. Klein ◽  
...  
Keyword(s):  
Shear Stress ◽  
Wall Shear Stress ◽  
Patient Specific ◽  
Wall Shear

Clinical, morphological, and hemodynamic independent characteristic factors for rupture of posterior communicating artery aneurysms

2015 ◽  
Vol 8 (8) ◽  
pp. 808-812 ◽  
Author(s):  
Ying Zhang ◽  
Linkai Jing ◽  
Jian Liu ◽  
Chuanhui Li ◽  
Jixing Fan ◽  
...  
Keyword(s):  
Shear Stress ◽  
Wall Shear Stress ◽  
Univariate Analysis ◽  
Multivariate Logistic Regression Analysis ◽  
Aneurysm Rupture ◽  
Irregular Shape ◽  
Posterior Communicating Artery ◽  
Patient Specific ◽  
Younger Age ◽  
Wall Shear

ObjectiveTo identify clinical, morphological, and hemodynamic independent characteristic factors that discriminate posterior communicating artery (PCoA) aneurysm rupture status.Methods173 patients with single PCoA aneurysms (108 ruptured, 65 unruptured) between January 2012 and June 2014 were retrospectively collected. Patient-specific models based on their three-dimensional digital subtraction angiography images were constructed and analyzed by a computational fluid dynamic method. All variables were analyzed by univariate analysis and multivariate logistic regression analysis.ResultsTwo clinical factors (younger age and atherosclerosis), three morphological factors (higher aspect ratio, bifurcation type, and irregular shape), and six hemodynamic factors (lower mean and minimum wall shear stress, higher oscillatory shear index, a greater portion of area under low wall shear stress, unstable and complex flow pattern) were significantly associated with PCoA aneurysm rupture. Independent factors characterizing the rupture status were identified as age (OR 0.956, p=0.015), irregular shape (OR 6.709, p<0.001), and minimum wall shear stress (OR 0.001, p=0.038).ConclusionsWe combined clinical, morphological, and hemodynamic characteristics analysis and found the three strongest independent factors for PCoA aneurysm rupture were younger age, irregular shape, and low minimum wall shear stress. This may be useful for guiding risk assessments and subsequent treatment decisions for PCoA aneurysms.

Exploring High Frequency Temporal Fluctuations in the Terminal Aneurysm of the Basilar Bifurcation

2012 ◽  
Vol 134 (9) ◽  
Author(s):  
Matthew D. Ford ◽  
Ugo Piomelli
Keyword(s):  
Shear Stress ◽  
Wall Shear Stress ◽  
High Frequency ◽  
Cerebral Aneurysms ◽  
Patient Specific ◽  
Disturbed Flow ◽  
Frequency Fluctuations ◽  
Wall Shear ◽  
Inflow Jet

Cerebral aneurysms are a common cause of death and disability. Of all the cardiovascular diseases, aneurysms are perhaps the most strongly linked with the local fluid mechanic environment. Aside from early in vivo clinical work that hinted at the possibility of high-frequency intra-aneurysmal velocity oscillations, flow in cerebral aneurysms is most often assumed to be laminar. This work investigates, through the use of numerical simulations, the potential for disturbed flow to exist in the terminal aneurysm of the basilar bifurcation. The nature of the disturbed flow is explored using a series of four idealized basilar tip models, and the results supported by four patient specific terminal basilar tip aneurysms. All four idealized models demonstrated instability in the inflow jet through high frequency fluctuations in the velocity and the pressure at approximately 120 Hz. The instability arises through a breakdown of the inflow jet, which begins to oscillate upon entering the aneurysm. The wall shear stress undergoes similar high-frequency oscillations in both magnitude and direction. The neck and dome regions of the aneurysm present 180 deg changes in the direction of the wall shear stress, due to the formation of small recirculation zones near the shear layer of the jet (at the frequency of the inflow jet oscillation) and the oscillation of the impingement zone on the dome of the aneurysm, respectively. Similar results were observed in the patient-specific models, which showed high frequency fluctuations at approximately 112 Hz in two of the four models and oscillations in the magnitude and direction of the wall shear stress. These results demonstrate that there is potential for disturbed laminar unsteady flow in the terminal aneurysm of the basilar bifurcation. The instabilities appear similar to the first instability mode of a free round jet.

Image Based CFD Modeling of Coronary Artery Wall Shear Stress and Importance of Patient-Specific Velocity Boundary Conditions

2007 ◽  
Author(s):  
Kevin R. Johnson ◽  
John N. Oshinski
Keyword(s):  
Shear Stress ◽  
Wall Shear Stress ◽  
Spatial Resolution ◽  
Multidetector Ct ◽  
Atherosclerotic Lesion ◽  
Cfd Modeling ◽  
Patient Specific ◽  
Lesion Development ◽  
Wall Shear ◽  
Atherosclerotic Lesion Development

Low and oscillatory arterial wall shear stress (WSS) have been shown to have an effect on many factors implicated in atherosclerotic lesion development. The majority of studies on the relationship between low or oscillating WSS and sites of intimal thickening and early atherosclerotic lesion development are based on in-vitro model studies of flow and WSS distribution. These models are based on average vessel geometries with average flow conditions and compared to average pathology distribution of lesions that may obscure the true relationship between WSS and lesion distribution[1]. Recent techniques have been developed using coronary MR angiography to create patient-specific 3D models along with velocity measurements of blood flow using phase contrast magnetic resonance (PCMR). However, these models may lack adequate spatial resolution for accurate, localized calculation of WSS[2]. Current, state-of-art multidetector CT scanners offer improvements in spatial resolution over MRI for creation of 3D vessel models.

Sign in / Sign up

Export Citation Format

Share Document