Computation of the Available Force Set of a 3-RPRR Kinematically-Redundant Planar Parallel Manipulator

2021 ◽  
pp. 1-13
Author(s):  
Marc Arsenault ◽  
Roger A. Boudreau ◽  
Scott B. Nokleby
Keyword(s):  
Parallel Manipulator ◽  
Parallel Manipulators ◽  
Computational Time ◽  
Robot Design ◽  
Exact Results ◽  
Brute Force ◽  
Performance Indices ◽  
Planar Parallel Manipulator ◽  
Brute Force Approach ◽  
Planar Parallel Manipulators

Abstract An algorithm is developed to determine the Available Force Set (AFS) of the 3-RPRR kinematically-redundant planar parallel manipulator. The results of the algorithm are verified against a brute force approach and are found to yield exact results with significantly less computational time. The use of the AFS in a robot design context is illustrated through the analysis of two performance indices: the maximum pure force capable of being applied in any direction and the maximum pure force capable of being applied in a given direction. The algorithm is used to compute the AFS and the performance indices throughout the 3-RPRR robot's workspace. The proposed methodology is a useful tool for the design and analysis of the 3-RPRR robot and could be adapted to other kinematically-redundant planar parallel manipulators.

Workspace Analysis and Going through Singularities of 5-Bar Symmetric Planar Parallel Manipulator by Automated Selective Actuation Mechanism

2012 ◽  
Vol 588-589 ◽  
pp. 1664-1668
Author(s):  
Syam Sundar ◽  
Vijay S. Rathore ◽  
Manoj K. Sahi ◽  
V. Upendran ◽  
Anjan Kumar Dash
Keyword(s):  
Closed Form ◽  
Parallel Manipulator ◽  
Parallel Manipulators ◽  
New Approach ◽  
Serial Manipulators ◽  
Actuation Mechanism ◽  
Geometric Conditions ◽  
Workspace Analysis ◽  
Planar Parallel Manipulator ◽  
Planar Parallel Manipulators

In this article‚ a new approach is presented to determine the various shapes of workspaces of 5 bar symmetric planar parallel manipulators. Here the shape of the workspace is determined by the number of ways the workspaces of the two serial manipulators intersect with each other. Geometric conditions are established in each case and area of each shape of workspace is determined in closed form. Singularity is another important consideration in the design of parallel manipulators. In this paper, an approach is presented to go through the singularity points using an automatic selective actuation mechanism. A prototype 5-bar planar manipulator is fabricated along with an automatic selective actuation mechanism demonstrating the manipulator going through the singularity points.

Comparative Kinematic Analysis and Design Optimization of Redundant and Nonredundant Planar Parallel Manipulators Intended for Haptic Use

Robotica ◽  
2019 ◽  
Vol 38 (8) ◽  
pp. 1463-1477 ◽  
Author(s):  
Houssem Saafi ◽  
Houssein Lamine
Keyword(s):  
Design Optimization ◽  
Kinematic Analysis ◽  
Parallel Manipulator ◽  
Kinematic Model ◽  
Parallel Manipulators ◽  
Geometric Parameters ◽  
Analysis And Design ◽  
Planar Parallel Manipulator ◽  
Forward Kinematic ◽  
Planar Parallel Manipulators

SUMMARYThis paper investigates a comparative kinematic analysis between nonredundant and redundant 2-Degree Of Freedom parallel manipulators. The nonredundant manipulator is based on the Five-Bar mechanism, and the redundant one is a 3-RRR planar parallel manipulator. This study is aimed to select the best structure for a haptic application. This latter requires a mechanism with a desired workspace of 10 cm × 10 cm and an admissible force of 5 N in all directions. The analysis criteria are the accuracy of the forward kinematic model and the required actuator torques. Thereby, the geometric parameters of the two structures are optimized in order to satisfy the required workspace such that parallel singularities are overcome. The analysis showed that the nonredundant optimally designed manipulator is more suitable for the haptic application.

Sensitivity Analysis of Planar Parallel Manipulators

2008 ◽  
Author(s):  
Ste´phane Caro ◽  
Nicolas Binaud ◽  
Philippe Wenger
Keyword(s):  
Sensitivity Analysis ◽  
Parallel Manipulator ◽  
Jacobian Matrix ◽  
Parallel Manipulators ◽  
Geometric Parameters ◽  
Sensitivity Coefficients ◽  
Planar Parallel Manipulator ◽  
Moving Platform ◽  
Conditioning Number ◽  
Planar Parallel Manipulators

This paper deals with the sensitivity analysis of planar parallel manipulators. A methodology is introduced to derive the sensitivity coefficients by means of the study of 3-RPR manipulators. As a matter of fact, the sensitivity coefficients of the pose of its moving platform to variations in the geometric parameters are expressed algebraically, the variations being defined both in Polar and Cartesian coordinates. The dexterity of the manipulator is also studied by means of the conditioning number of its normalized kinematic Jacobian matrix. As an illustrative example, the sensitivity of a symmetrical planar parallel manipulator is analyzed in detail. Finally, the accuracy of the manipulator is compared with its dexterity.

Dexterity and Adaptive Control of Planar Parallel Manipulators With and Without Redundant Actuation

2014 ◽  
Vol 10 (1) ◽  
Author(s):  
Weiwei Shang ◽  
Shuang Cong
Keyword(s):  
Adaptive Control ◽  
Parallel Manipulator ◽  
Adaptive Controller ◽  
Parallel Manipulators ◽  
The Other ◽  
Experimental Comparison ◽  
Redundant Actuation ◽  
Tracking Accuracy ◽  
Planar Parallel Manipulator ◽  
Planar Parallel Manipulators

The objective of this paper is to determine whether a planar parallel manipulator with redundant actuation has better tracking accuracy than a planar parallel manipulator without redundant actuation. The effects of the redundant actuation on tracking accuracy of parallel manipulators are studied by using two different experimental platforms. The first platform is the planar five-bar parallel manipulator with normal actuation, and the other one is the planar parallel manipulator with redundant actuation. The dexterity pictures and the kinematic configurations of the two platforms validate the kinematic advantages from the redundant actuation. In order to study the dynamic advantages of the redundant actuation further, a nonlinear adaptive controller is presented for the two platforms. The experimental comparison is implemented on two actual parallel manipulator platforms, and from the experimental results, one can find the tracking accuracy of the parallel manipulator with redundant actuation can be improved above 38% than that of the five-bar parallel manipulator without redundant actuation.

scholarly journals SINGULARITY ANALYSIS OF A 3-PRRR KINEMATICALLY REDUNDANT PLANAR PARALLEL MANIPULATOR

1970 ◽  
Vol 41 (1) ◽  
pp. 1-6 ◽  
Author(s):  
Soheil Zarkandi
Keyword(s):  
Motion Control ◽  
Parallel Manipulator ◽  
Parallel Manipulators ◽  
Singularity Analysis ◽  
Redundant Manipulators ◽  
Static Behavior ◽  
Singular Configurations ◽  
Planar Parallel Manipulator ◽  
And Control ◽  
Planar Parallel Manipulators

Finding Singular configurations (singularities) is one of the mandatory steps during the design and control of mechanisms. Because, in these configurations, the instantaneous kinematics is locally undetermined that causes serious problems both to static behavior and to motion control of the mechanism. This paper addresses the problem of determining singularities of a 3-PRRR kinematically redundant planar parallel manipulator by use of an analytic technique. The technique leads to an input –output relationship that can be used to find all types of singularities occurring in this type of manipulators.Key Words: Planar parallel manipulators; Redundant manipulators; Singularity analysis; Jacobian matrices.DOI: 10.3329/jme.v41i1.5356Journal of Mechanical Engineering, Vol. ME 41, No. 1, June 2010 1-6

FORCE-UNCONSTRAINED POSES OF THE 3-PRR AND 4-PRR PLANAR PARALLEL MANIPULATORS

2005 ◽  
Vol 29 (4) ◽  
pp. 617-628 ◽  
Author(s):  
Flavio Firmani ◽  
Ron P. Podhorodeski
Keyword(s):  
Parallel Manipulator ◽  
Dimensional Space ◽  
Three Dimensional ◽  
Parallel Manipulators ◽  
Task Space ◽  
Planar Parallel Manipulator ◽  
Order Polynomial ◽  
Position And Orientation ◽  
Planar Parallel Manipulators ◽  
Three Dimensional Space

Force-unconstrained (singular) poses of the 3-PRR planar parallel manipulator (PPM), where the underscore indicates the actuated joint, and the 4-PRR, a redundant PPM with an additional actuated branch, are presented. The solution of these problems is based upon concepts of reciprocal screw quantities and kinematic analysis. In general, non-redundant PPMs such as the 3-PRR are known to have two orders of infinity of force-unconstrained poses, i.e., a three-variable polynomial in terms of the task-space variables (position and orientation of the mobile platform). The inclusion of redundant branches eliminates one order of infinity of force-unconstrained configurations for every actuated branch beyond three. The geometric identification of force-unconstrained poses is carried out by assuming one variable for each order of infinity. In order to simplify the algebraic procedure of these problems, the assumed or “free” variables are considered to be joint displacements. For both manipulators, an effective elimination technique is adopted. For the 3-PRR, the roots of a 6th-order polynomial determine the force-unconstrained poses, i.e., surfaces in a three dimensional space defined by the task-space variables. For the 4-PRR, a 64th-order polynomial determines curves of force-unconstrained poses in the same dimensional space.

Generation and Forward Displacement Analysis of RP_R-PR-RP_R Analytic Planar Parallel Manipulators

2002 ◽  
Vol 124 (2) ◽  
pp. 294-300 ◽  
Author(s):  
Xianwen Kong ◽  
Cle´ment M. Gosselin
Keyword(s):  
Parallel Manipulator ◽  
Parallel Manipulators ◽  
Fourth Degree ◽  
Forward Displacement ◽  
Displacement Analysis ◽  
Kinematic Chains ◽  
Real Solutions ◽  
Planar Parallel Manipulator ◽  
Forward Displacement Analysis ◽  
Planar Parallel Manipulators

Analytic manipulators are manipulators for which a characteristic polynomial of fourth degree or lower can be obtained symbolically. Six types of RP_R-PR-RP_R analytic planar parallel manipulators (APPMs) are first generated using the component approach and the method based on the structure of the univariate equation. Of the six types, four are composed of Assur II kinematic chains while the other two are composed of Assur III kinematic chains. The forward displacement analysis (FDA) of two types of RP_R-PR-RP_R APPMs composed of Assur III kinematic chains is then performed. The FDA of each of the two types of APPMs composed of Assur III kinematic chains is reduced to the solution of a univariate cubic equation and a quadratic equation in sequence. It is also proven that the maximum number of real solutions to the FDA is 4 for the RP_R-PR-RP_R planar parallel manipulator with one aligned platform and one orthogonal platform. Examples with 4 real solutions for the RP_R-PR-RP_R planar parallel manipulator with one aligned platform and one orthogonal platform or 6 real solutions for the RP_R-PR-RP_R planar parallel manipulator with two aligned platforms are given at the end of this paper.

Optimum synthesis of planar parallel manipulators based on kinematic isotropy and force balancing

Robotica ◽  
2004 ◽  
Vol 22 (1) ◽  
pp. 97-108 ◽  
Author(s):  
Gürsel Alıcı ◽  
Bijan Shirinzadeh
Keyword(s):  
Condition Number ◽  
Parallel Manipulator ◽  
Parallel Manipulators ◽  
Point Of View ◽  
Kinematic Chains ◽  
Optimum Synthesis ◽  
Planar Parallel Manipulator ◽  
Distribution Parameters ◽  
Optimisation Procedure ◽  
Planar Parallel Manipulators

This paper deals with an optimum synthesis of planar parallel manipulators using two constrained optimisation procedures based on the minimization of: (i) the overall deviation of the condition number of manipulator Jacobian matrix from the ideal/isotropic condition number, and (ii) bearing forces throughout the manipulator workspace for force balancing. A revolute jointed planar parallel manipulator is used as an example to demonstrate the methodology. The parameters describing the manipulator geometry are obtained from the first optimisation procedure, and subsequently, the mass distribution parameters of the manipulator are determined from the second optimisation procedure based on force balancing. Optimisation results indicate that the proposed optimisation approach is systematic, versatile and easy to implement for the optimum synthesis of the parallel manipulator and other kinematic chains. This work contributes to previously published work from the point of view of being a systematic approach to the optimum synthesis of parallel manipulators, which is currently lacking in the literature.

A general dynamic model for a large-scale 2-DOF planar parallel manipulator

Robotica ◽  
1999 ◽  
Vol 17 (6) ◽  
pp. 675-683 ◽  
Author(s):  
Khaled R. Atia ◽  
M.P. Cartmell
Keyword(s):  
Dynamic Model ◽  
Parallel Manipulator ◽  
Large Scale ◽  
Parallel Manipulators ◽  
New Approach ◽  
Planar Parallel Manipulator ◽  
Two Degree Of Freedom ◽  
Planar Parallel Manipulators ◽  
Number Of Cells ◽  
General Dynamic

In this work a new concept of designing two degree of freedom (2-DOF) planar parallel manipulators (PPMs) is presented. With this design the manipulator's workspace can be increased by increasing the number of cells in the manipulator. A general dynamic model is formulated for the manipulator with any number of cells. The model is adapted for SCARA and ADEPT configurations, and a new approach for balancing these type of manipulators is proposed.

scholarly journals Acceleration Analysis of 3-DOF Planar Parallel Manipulators by Means of Screw Theory

2016 ◽  
Vol 45 (2) ◽  
pp. 89-95
Author(s):  
Soheil Zarkandi
Keyword(s):  
Parallel Manipulator ◽  
Screw Theory ◽  
Parallel Manipulators ◽  
Second Order ◽  
Degree Of Freedom ◽  
Planar Parallel Manipulator ◽  
Acceleration Analysis ◽  
Three Degree Of Freedom ◽  
Planar Parallel Manipulators

This paper deals with the second order kinematics of three degree-of-freedom (DOF) planar parallel manipulators. The simple and compact expressions are derived for both the inverse and forward acceleration analyses using screw theory. Moreover, as an example, a 3-DOF planar parallel manipulator is introduced and its kinematics is analyzed using the proposed method.

Sign in / Sign up

Export Citation Format

Share Document