Hybrid Dynamic Modeling and Analysis of High-speed Thin-rimmed Gears

2021 ◽  
pp. 1-23
Author(s):  
Changzhao Liu ◽  
Yu Zhao ◽  
Yong Wang ◽  
Tie Zhang ◽  
Hanjie Jia
Keyword(s):  
Finite Element ◽  
Dynamic Model ◽  
High Speed ◽  
Degrees Of Freedom ◽  
Element Model ◽  
Lumped Parameter Model ◽  
Modeling And Analysis ◽  
Lumped Parameter ◽  
Proposed Model ◽  
Angular Displacements

Abstract In this study, a hybrid dynamic model of high-speed thin-rimmed gears is developed. In this model, the translational and angular displacements (including the rigid and vibration displacements) with a total of six degrees of freedom (DOFs) are selected as the generalized coordinates for each gear, and the meshing force distributions along the contact line and between the teeth are considered. Thus, the model can be implemented under stationary and non-stationary conditions. The condensed finite element models are developed with the centrifugal and inertia forces for gear bodies. This paper proposes a novel method to couple the lumped parameter model and condensed finite element model for the hybrid dynamic model system, which considers the variation of the meshing tooth during the gear operation, namely, the variations of the acting point of meshing force. Based on the model, the dynamic analysis of high-speed thin-rimmed gears is conducted under stationary speed and acceleration processes. The effects of the flexible gear body, high speed, and tooth errors on the system dynamics and tooth load distribution are investigated. The analysis results are also compared with the current reference and pure finite element method to validate the proposed model.

scholarly journals Analysis of Fly Fishing Rod Casting Dynamics

2011 ◽  
Vol 18 (6) ◽  
pp. 839-855
Author(s):  
Gang Wang ◽  
Norman Wereley
Keyword(s):  
Finite Element ◽  
Initial Boundary ◽  
Element Model ◽  
Nonlinear Finite Element ◽  
Lumped Parameter Model ◽  
Parameter Method ◽  
Line System ◽  
Fly Fishing ◽  
Lumped Parameter ◽  
Rigid Rod

An analysis of fly fishing rod casting dynamics was developed comprising of a nonlinear finite element representation of the composite fly rod and a lumped parameter model for the fly line. A nonlinear finite element model was used to analyze the transient response of the fly rod, in which fly rod responses were simulated for a forward casting stroke. The lumped parameter method was used to discretize the fly line system. Fly line motions were simulated during a cast based on fly rod tip response, which was used as the initial boundary condition for the fly line. Fly line loop generation, propagation, and line turn-over were simulated numerically. Flexible rod results were compared to the rigid rod case, in which the fly tip path was prescribed by a given fly rod butt input. Our numerical results strongly suggest that nonlinear flexibility effects on the fly rod must be included in order to accurately simulate casting dynamics and associated fly line motion.

scholarly journals Coupled Bending-Bending-Torsion Vibration of a Pre-Twisted Beam with Aerofoil Cross-Section by the Finite Element Method

2003 ◽  
Vol 10 (4) ◽  
pp. 223-230
Author(s):  
Bulent Yardimoglu ◽  
Daniel J. Inman
Keyword(s):  
Finite Element ◽  
Cross Section ◽  
Degrees Of Freedom ◽  
Element Model ◽  
Higher Order ◽  
Coupling Coefficients ◽  
Cross Sectional ◽  
Torsion Vibration ◽  
Proper Order ◽  
Proposed Model

The present study deals with a finite element model for coupled bending-bending-torsion vibration analysis of a pretwisted Timoshenko beam with varying aerofoil cross-section. The element derived in this paper has two nodes, with seven degrees of freedom at each node. The nodal variables are transverse displacements, cross-section rotations and the shear angles in two planes and torsional displacement. The advantage of the present element is the exclusion of unnecessary derivatives of fundamental nodal variables, which were included to obtain invertable square matrix by other researchers, by choosing proper displacement functions and using relationship between cross-sectional rotation and the shear deformation. Element stiffness and mass matrices are developed from strain and kinetic energy expressions by assigning proper order polynomial expressions for cross-section properties and considering higher order coupling coefficients. The correctness of the present model is confirmed by the experimental results available in the literature. Comparison of the proposed model results with those in the literature indicates that a faster convergence is obtained. The results presented also provide some insights in the formulation by clearly indicating that higher order coupling terms have considerable influence on the natural frequencies.

scholarly journals Estimation of Optimal Values for Lumped Elements in a Finite Element — Lumped Parameter Model of a Loudspeaker

2020 ◽  
Vol 28 (02) ◽  
pp. 2050012
Author(s):  
Daniel Gert Nielsen ◽  
Peter Risby Andersen ◽  
Jakob Søndergaard Jensen ◽  
Finn Thomas Agerkvist
Keyword(s):  
Finite Element ◽  
Element Model ◽  
Lumped Parameter Model ◽  
Model Complexity ◽  
Fe Model ◽  
High Frequencies ◽  
Lumped Parameter ◽  
Lumped Elements ◽  
Optimal Values ◽  
Very High Frequencies

Finite element methods are progressively being utilized to assist in the continuous development of loudspeakers. The core of this paper is the method of lumping certain parts of the finite element model, creating a significant reduction in the model complexity that allows for e.g. faster structural optimization. This is illustrated in the paper with a loudspeaker example where the electromagnetic parts are lumped as well as the spider. It is shown that the simplified model still matches the complex response of the full FE model at very high frequencies.

Nonlinear Dynamics of Planetary Gears Using Analytical and Finite Element Models

2007 ◽  
Author(s):  
Robert G. Parker ◽  
Vijaya Kumar Ambarisha
Keyword(s):  
Finite Element ◽  
Period Doubling ◽  
Element Model ◽  
Lumped Parameter Model ◽  
Finite Element Models ◽  
Two Dimensional ◽  
Tooth Contact ◽  
Planetary Gears ◽  
Lumped Parameter ◽  
Mesh Phasing

Vibration induced gear noise and dynamic loads remain key concerns in many transmission applications that use planetary gears. Tooth separations at large vibrations introduce nonlinearity in geared systems. The present work examines the complex, nonlinear dynamic behavior of spur planetary gears using two models: (i) a lumped-parameter model, and (ii) a finite element model. The two-dimensional lumped-parameter model represents the gears as lumped inertias, the gear meshes as nonlinear springs with tooth contact loss and periodically varying stiffness due to changing tooth contact conditions, and the supports as linear springs. The two-dimensional finite element model is developed from a unique finite elementcontact analysis solver specialized for gear dynamics. Mesh stiffness variation excitation, corner contact, and gear tooth contact loss are all intrinsically considered in the finite element analysis. The dynamics of planetary gears show a rich spectrum of nonlinear phenomena. Nonlinear jumps, chaotic motions, and period-doubling bifurcations occur when the mesh frequency or any of its higher harmonics are near a natural frequency of the system. Responses from the dynamic analysis using analytical and finite element models are successfully compared qualitatively and quantitatively. These comparisons validate the effectiveness of the lumped-parameter model to simulate the dynamics of planetary gears. Mesh phasing rules to suppress rotational and translational vibrations in planetary gears are valid even when nonlinearity from tooth contact loss occurs. These mesh phasing conclusions, however, are not valid in the chaotic and period-doubling regions.

An Assessed Model for the Vibro-Acoustic Analysis of Gear Pumps

2013 ◽  
Author(s):  
Emiliano Mucchi ◽  
Giorgio Dalpiaz
Keyword(s):  
Finite Element ◽  
Boundary Element ◽  
Acoustic Analysis ◽  
Simulated Data ◽  
Element Model ◽  
Lumped Parameter Model ◽  
Fe Model ◽  
Gear Pump ◽  
Operational Conditions ◽  
Lumped Parameter

In this work a combined model for the vibro-acoustic analysis of an external gear pump for automotive applications is presented and experimentally assessed. The model includes a lumped-parameter model, a finite-element model and a boundary-element model. The lumped-parameter (LP) model regards the interior parts of the pump (bearing blocks and gears), the finite element (FE) model regards the external parts of the pump (casing and end plates), while the boundary element (BE) model estimates the noise generation in operational conditions. Attention has been devoted to the inclusion of the oil effect inside the pump casing: the fluid-structure interaction between oil and pump casing was taken into account. The model has been assessed using experiments: the experimental accelerations and acoustic pressure measured in operational conditions have been compared with the simulated data coming from the combined LP/FE/BE model. Eventually, model results and limitations are presented.

Research on the Effects of Welding Sequence on Welding Residual Stress of High-Speed Train Based on SYSWELD

2011 ◽  
Vol 399-401 ◽  
pp. 1806-1811
Author(s):  
Yong Hong Chen ◽  
Peng Chen ◽  
Ai Qin Tian
Keyword(s):  
Residual Stress ◽  
Finite Element ◽  
High Speed ◽  
Element Model ◽  
Welding Residual Stress ◽  
High Speed Train ◽  
Distribution Law ◽  
Element Analysis ◽  
Welding Sequence ◽  
Maximum Residual Stress

The finite element model of the roof of aluminum high-speed train was established, double ellipsoid heat source was employed, and heat elastic-plastic theory was used to simulate welding residual stress of the component under different welding sequence based on the finite element analysis software SYSWELD. The distribution law of welding residual stress was obtained. And the effects of the welding sequence on the value and distribution of residual stress was analyzed. The numerical results showed that the simulation data agree well with experimental test data. The maximum residual stress appears in the weld seam and nearby. The residual stress value decreases far away from the welding center. Welding sequence has a significant impact on the final welding residual stress when welding the roof of aluminum body. The side whose residual stress needs to be controlled should be welded first.

A Lumped Parameter Electromechanical Model for Describing the Nonlinear Behavior of Piezoelectric Actuators

1997 ◽  
Vol 119 (3) ◽  
pp. 478-485 ◽  
Author(s):  
M. Goldfarb ◽  
N. Celanovic
Keyword(s):  
System Analysis ◽  
Nonlinear Behavior ◽  
Piezoelectric Actuators ◽  
Bond Graph ◽  
Lumped Parameter Model ◽  
Input Output ◽  
Mechanical Stiffness ◽  
Analysis And Design ◽  
Lumped Parameter ◽  
Proposed Model

A lumped-parameter model of a piezoelectric stack actuator has been developed to describe actuator behavior for purposes of control system analysis and design, and in particular for control applications requiring accurate position tracking performance. In addition to describing the input-output dynamic behavior, the proposed model explains aspects of nonintuitive behavioral phenomena evinced by piezoelectric actuators, such as the input-output rate-independent hysteresis and the change in mechanical stiffness that results from altering electrical load. Bond graph terminology is incorporated to facilitate the energy-based formulation of the actuator model. The authors propose a new bond graph element, the generalized Maxwell resistive capacitor, as a lumped-parameter causal representation of rate-independent hysteresis. Model formulation is validated by comparing results of numerical simulations to experimental data.

scholarly journals Electrothermal Modeling and Analysis of Gallium Oxide Power Switching Devices

2019 ◽  
Author(s):  
Ramchandra M. Kotecha ◽  
Andriy Zakutayev ◽  
Wyatt K. Metzger ◽  
Paul Paret ◽  
Gilberto Moreno ◽  
...  
Keyword(s):  
Finite Element ◽  
Power Electronics ◽  
Gallium Oxide ◽  
Short Circuit ◽  
Thermal Characteristics ◽  
Wide Band ◽  
Element Model ◽  
Oxide Semiconductor ◽  
Modeling And Analysis ◽  
Device Architecture

Abstract Gallium oxide is an emerging wide band-gap material that has the potential to penetrate the power electronics market in the near future. In this paper, a finite-element gallium oxide semiconductor model is presented that can predict the electrical and thermal characteristics of the device. The finite element model of the two-dimensional device architecture is developed inside the Sentaurus environment. A vertical FinFET device architecture is employed to assess the device’s behavior and its static and dynamic characteristics. Enhancement-mode device operation is realized with this type of device architecture without the need for any selective area doping. The dynamic thermal behavior of the device is characterized through its short-circuit behavior. Based on the device static and dynamic behavior, it is envisioned that reliable vertical transistors can be fabricated for the power electronics applications.

A Parallel Solution Strategy for Finite Element Models

1996 ◽  
Author(s):  
Jordan J. Cox ◽  
Jeffrey A. Talbert ◽  
Eric Mulkay
Keyword(s):  
Finite Element ◽  
Degrees Of Freedom ◽  
Element Model ◽  
Decomposition Methods ◽  
Finite Element Models ◽  
Unique Contribution ◽  
Matrix Equations ◽  
Parallel Solution ◽  
The Finite Element Model ◽  
Parallel Fashion

Abstract This paper presents a method for naturally decomposing finite element models into sub-models which can be solved in a parallel fashion. The unique contribution of this paper is that the decomposition strategy comes from the geometric features used to construct the solid model that the finite element model represents. Domain composition and domain decomposition methods are used to insure global compatibility. These techniques reduce the N2 behavior of traditional matrix solving techniques, where N is the number of degrees of freedom in the global set of matrix equations, to a sum of m matrices with n2 behavior, where n represents the number of degrees of freedom in the smaller sub-model matrix equations.

Sign in / Sign up

Export Citation Format

Share Document