Development of the Hybrid Gas Turbine: 1st Year Summary — Research and Development on Practical Industrial Cogeneration Technology in Japan

2001 ◽  
Author(s):  
Ryozo Tanaka ◽  
Testuo Tastumi ◽  
Yoshihiro Ichikawa ◽  
Koji Sanbonsugi
Keyword(s):  
Research And Development ◽  
Gas Turbine ◽  
Gas Turbines ◽  
Industrial Applications ◽  
Medium Size ◽  
Test Plant ◽  
Inlet Temperature ◽  
Term Operation ◽  
Generation Technology

Based on the successful results of the Japanese national project for 300 kW ceramic gas turbine(CGT302) development (this project was finished in March 1999), the Ministry of International Trade and Industry (MITI) started “Research and Development on Practical Industrial Co-generation Technology” project in August 1999. The objective of this project is to encourage prompt industrial applications of co-generation technology that employs hybrid gas turbines (HGT; using both metal and ceramic parts in its high-temperature section) by confirming its soundness and reliability. The development activities are performed through material evaluation tests and long-term operation tests for the HGT of the medium size (8,000-kW class). It is expected that the development can realize low pollution and reducing the emission of CO2 with highly efficient use of energy. The HGT will be developed by applying ceramic components to an existing commercial 7,000-kW class gas turbine. The development targets are thermal efficiency of 34% or higher, output of 8,000-kW class, inlet temperature of 1250deg-C, and 4,000hrs of operation period for confirmation of reliability. The HGT for long-term evaluation tests and the test plant are under development. This paper gives the summary of last year’s developments in the HGT project.

Research and Development of Practical Industrial Cogeneration Technology in Japan

2000 ◽  
Author(s):  
Toshiaki Abe ◽  
Takashi Sugiura ◽  
Shuji Okunaga ◽  
Katsuhiro Nojima ◽  
Yasukata Tsutsui ◽  
...  
Keyword(s):  
Research And Development ◽  
Gas Turbine ◽  
High Temperatures ◽  
Gas Turbines ◽  
High Efficiency ◽  
Development Project ◽  
Term Operation ◽  
Resistance To Heat

This paper presents an overview of a development project involving industrial cogeneration technology using 8,000-kW class hybrid gas turbines in which both metal and ceramics are used in parts subject to high temperatures in order to achieve high efficiency and low pollution. The development of hybrid gas turbines focuses mainly on the earlier commercialization of the turbine system. Stationary parts such as combustor liners, transition ducts, and first-stage turbine nozzles (stationary blades) are expected to be fabricated from ceramics. The project aims at developing material for these ceramic parts that will have a superior resistance to heat and oxidation. The project also aims at designing and prototyping a hybrid gas turbine system to analyze the operation in order to improve the performance. Furthermore, the prototyped hybrid gas turbine system will be tested for long-term operation (4,000 hours) to verify that the system can withstand commercialization. Studies will be conducted to ensure that the system’s soundness and reliability are sufficient for industrial cogeneration applications.

Summary of CGT302 Ceramic Gas Turbine Research and Development Program

2000 ◽  
Author(s):  
Isashi Takehara ◽  
Tetsuo Tatsumi ◽  
Yoshihiro Ichikawa
Keyword(s):  
Research And Development ◽  
Gas Turbine ◽  
Thermal Efficiency ◽  
High Efficiency ◽  
Development Program ◽  
Pollutant Emissions ◽  
Inlet Temperature ◽  
Term Operation ◽  
Ceramic Components

The Japanese Ceramic Gas Turbine (CGT) research and development program (FY1988–1998) as a part of the New Sunshine Project funded by the Ministry of International Trade and Industry (MITI) was completed in March 1999. Kawasaki Heavy Industries, Ltd. (KM) participated in this research program from the beginning and developed a twin-shaft CGT with a recuperator, designated as the “CGT302”. The purposes of this program were: 1) to achieve both a high efficiency and low pollutant emissions level using ceramic components, 2) to prove a multi-fuel capability to be used in co-generation systems, and 3) to demonstrate long-term operation. The targets of this program were: i) to achieve a thermal efficiency of over 42% at a turbine inlet temperature (TIT) of 1350°C, ii) to keep its emissions within the regulated value by the law, and iii) to demonstrate continuous operation for more than a thousand hours at 1200°C TIT. The CGT302 has successfully attained its targets. In March 1999 the CGT302 recorded 42.1% thermal efficiency, and 31.7 ppm NOx emissions (O2 = 16%) at 1350°C TIT. At this time it had also accumulated over two thousand hours operation at 1200°C. In this paper, we summarize the development of the CGT302.

Development of the 8000 kW Class Hybrid Gas Turbine

2003 ◽  
Author(s):  
Hitoshi Nagata ◽  
Wataru Karasawa ◽  
Yoshihiro Ichikawa ◽  
Sazo Tsuruzono ◽  
Takero Fukudome
Keyword(s):  
Gas Turbine ◽  
Industrial Applications ◽  
Tensile Creep ◽  
Fiscal Year ◽  
Medium Size ◽  
Critical Crack ◽  
Exposure Test ◽  
Term Operation ◽  
Development Organization ◽  
Generation Technology

Based on the successful result of the Japanese national project for 300 kW class ceramic gas turbine development (this project was finished in March 1999), the New Energy and Industrial Technology Development Organization (NEDO) contract project “Research and Development on Practical Industrial Co-generation Technology”, funded by the Ministry of Economy, Trade and Industry (METI), started in August 1999. This project is a five-year plan until the end of the 2003 fiscal year. The objective of this project is to encourage prompt industrial applications of co-generation technology that employs a hybrid gas turbine (HGT; using both metal and ceramic parts in its high-temperature section) by confirming its soundness and reliability. The development activities are performed through ceramic material evaluation test and long-term operation test for the HGT of the medium size (8,000-kW class). It is expected that the development can realize low pollution and reducing the emission of CO2 with highly efficient use of energy. To grasp the material characteristic of the ceramic, the tensile creep rupture test, cyclic fatigue test, sub-critical crack growth test, and exposure test had been carried out. Sub element tests, such as Sector Model Text and Pre-test were carried out prior to the operation study. The operation study was started in the 2002 fiscal year. The operation tests to 5/8-load (about 5,000-kW) had been carried out as of February 2003. This paper gives the progress of the developments of the HGT.

Summary of CGT302 Ceramic Gas Turbine Research and Development Program

2002 ◽  
Vol 124 (3) ◽  
pp. 627-635 ◽  
Author(s):  
I. Takehara ◽  
T. Tatsumi ◽  
Y. Ichikawa
Keyword(s):  
Research And Development ◽  
Gas Turbine ◽  
Thermal Efficiency ◽  
High Efficiency ◽  
Development Program ◽  
Pollutant Emissions ◽  
Inlet Temperature ◽  
Term Operation ◽  
Ceramic Components

The Japanese ceramic gas turbine (CGT) research and development program (FY1988-1998) as a part of the New Sunshine Project funded by the Ministry of International Trade and Industry (MITI) was completed in March 1999. Kawasaki Heavy Industries, Ltd. (KHI) participated in this research program from the beginning and developed a twin-shaft CGT with a recuperator, designated as the “CGT302.” The purposes of this program were (1) to achieve both a high efficiency and low pollutant emissions level using ceramic components, (2) to prove a multifuel capability to be used in cogeneration systems, and (3) to demonstrate long-term operation. The targets of this program were (i) to achieve a thermal efficiency of over 42 percent at a turbine inlet temperature (TIT) of 1350°C, (ii) to keep its emissions within the regulated value by the law, and (iii) to demonstrate continuous operation for more than a thousand hours at 1200°C TIT. The CGT302 has successfully attained its targets. In March 1999 the CGT302 recorded 42.1 percent thermal efficiency, and 31.7 ppm NOx emissions (O2=16 percent) at 1350°C TIT. At this time it had also accumulated over 2000 hours operation at 1200°C. In this paper, we summarize the development of the CGT302.

Fatigue Strength and Metal Condition in the Context of Gas Turbine Buckets Life Extension

2012 ◽  
Author(s):  
Sergey A. Ivanov ◽  
Alexander I. Rybnikov
Keyword(s):  
Fatigue Strength ◽  
Service Life ◽  
Gas Turbine ◽  
Fatigue Resistance ◽  
Gas Turbines ◽  
Life Extension ◽  
Term Operation ◽  
Life Estimation ◽  
Metal Properties

Criteria for remaining life estimation and methods for enhancing fatigue resistance of heavy-duty gas turbine bucket metal are based on the analysis of changes in the structure and properties of metal after long-term operation. High-cycle fatigue (HCF) resistance is shown to be a decisive characteristic in the residual life estimation of turbine buckets after operation over 100,000 hours. The tests of the buckets from cast and wrought nickel-based alloys after long-term operation demonstrated decreasing of fatigue strength by up to 25%. The metal structure in operation undergoes notable deterioration mainly in phase redistribution. The size and configuration of metal phases are changing also. It caused the changes in metal properties. The decrease of the bucket fatigue strength correlates with the decrease of metal ductility. The reconditioning heat treatment resulted in restoring mechanical properties of metal. The fatigue resistance also increased nearly to the initial level. The influence of operational factors on bucket fatigue strength deterioration has been established. The mechanical damages on bucket airfoil may decrease the fatigue resistance. We found the correlation of endurance limit and damages depth. The procedures for metal properties recovering and buckets service life substantial extension have been developed. It has resulted in the extension of the buckets service life by up to 50% over the assigned life in gas turbines operated by Gazprom.

Development of a Low NOx Combustor for 300kW-Class Ceramic Gas Turbine (CGT302)

1998 ◽  
Author(s):  
A. Okuto ◽  
T. Kimura ◽  
I. Takehara ◽  
T. Nakashima ◽  
Y. Ichikawa ◽  
...  
Keyword(s):  
Research And Development ◽  
Gas Turbine ◽  
Flow Rate ◽  
Gas Turbines ◽  
Combustion Efficiency ◽  
Development Project ◽  
Pollutant Emissions ◽  
Inlet Temperature ◽  
Outlet Temperature ◽  
Nox Emissions

Research and development project of ceramic gas turbines (CGT) was started in 1988 promoted by the Ministry of International Trade and Industry (MITI) in Japan. The target of the CGT project is development of a 300kW-class ceramic gas turbine with a 42 % thermal efficiency and a turbine inlet temperature (TIT) of 1350°C. Three types of CGT engines are developed in this project. One of the CGT engines, which is called CGT302, is a recuperated two-shaft gas turbine for co-generation use. In this paper, we describe the research and development of a combustor for the CGT302. The project requires a combustor to exhaust lower pollutant emissions than the Japanese regulation level. In order to reduce NOx emissions and achieve high combustion efficiency, lean premixed combustion technology is adopted. Combustion rig tests were carried out using this combustor. In these tests we measured the combustor performance such as pollutant emissions, combustion efficiency, combustor inlet/outlet temperature, combustor inlet pressure and pressure loss through combustor. Of course air flow rate and fuel flow rate are controlled and measured, respectively. The targets for the combustor such as NOx emissions and combustion efficiency were accomplished with sufficient margin in these combustion rig tests. In addition, we report the results of the tests which were carried out to examine effects of inlet air pressure on NOx emissions here.

scholarly journals Development of a High Pressure Ratio Centrifugal Compressor for 300kW-Class Ceramic Gas Turbine

1997 ◽  
Author(s):  
T. Sakai ◽  
Y. Tohbe ◽  
T. Fujii ◽  
T. Tatsumi
Keyword(s):  
Research And Development ◽  
Gas Turbine ◽  
Gas Turbines ◽  
High Efficiency ◽  
Pressure Ratio ◽  
Flow Distribution ◽  
Leading Edge ◽  
Inlet Temperature ◽  
Angle Distribution ◽  
Gas Generator

Research and development of ceramic gas turbines (CGT), which is promoted by the Japanese Ministry of International Trade and Industry (MITI), was started in 1988. The target of the CGT project is development of a 300kW-class ceramic gas turbine with a 42 % thermal efficiency and a turbine inlet temperature (TIT) of 1350°C. Two types of CGT engines are developed in this project. One of the CGT engines, which is called CGT302, is a recuperated two-shaft gas turbine with a compressor, a gas-generator turbine, and a power turbine for cogeneration. In this paper, we describe the research and development of a compressor for the CGT302. Specification of this compressor is 0.89 kg/sec air flow rate and 8:1 pressure ratio. The intermediary target efficiency is 78% and the final target efficiency is 82%, which is the highest level in email centrifugal compressors like this one. We measured impeller inlet and exit flow distribution using three-hole yaw probes which were traversed from the shroud to the hub. Based on the measurement of the impeller exit flow, diffusers with a leading edge angle distribution adjusted to the inflow angle were designed and manufactured. Using this diffuser, we were able to attain a high efficiency (8:1 pressure ratio and 78% adiabatic efficiency).

Low NOx SEV Lean Premix Reheat Combustion in Alstom GT24 Gas Turbines

2015 ◽  
Author(s):  
Daniel Guyot ◽  
Gabrielle Tea ◽  
Christoph Appel
Keyword(s):  
High Pressure ◽  
Gas Turbine ◽  
Gas Turbines ◽  
Fuel Injection ◽  
Test Facility ◽  
Inlet Temperature ◽  
Combustion System ◽  
Operational Flexibility ◽  
Term Operation ◽  
Fuel Flexibility

Reducing gas turbine emissions and increasing their operational flexibility are key targets in today’s gas turbine market. In order to further reduce emissions and increase the operational flexibility of its GT24 (60Hz) and GT26 (50Hz), Alstom has introduced an improved SEV burner and fuel lance into its GT24 upgrade 2011 and GT26 upgrade 2011 sequential reheat combustion system. Sequential combustion is a key differentiator of Alstom GT24 engines in the F-class gas turbine market. The inlet temperature for the GT24 SEV combustor is around 1000 degC and reaction of the fuel/oxidant mixture is initiated through auto-ignition. The recent development of the Alstom sequential combustion system is a perfect example of evolutionary design optimizations and technology transfer between Alstom GT24 and GT26 engines. Better overall performance is achieved through improved SEV burner aerodynamics and fuel injection, while keeping the main features of the sequential burner technology. The improved SEV burner/lance concept has been optimized towards rapid fuel/oxidant mixing for low emissions, improved fuel flexibility with regards to highly reactive fuels (higher C2+ and hydrogen content), and to sustain a wide operation window. In addition, the burner front panel features an improved cooling concept based on near-wall cooling as well as integrated acoustics damping devices designed to reduce combustion pulsations thus extending the SEV combustor’s operation window even further. After having been validated extensively in the Alstom high pressure sector rig test facility, the improved GT24 SEV burner has been retrofitted into a commercial GT24 field engine for full engine validation during long-term operation. This paper presents the obtained high pressure sector rig and engine validation results for the GT24 (2011) SEV burner/lance hardware with a focus on reduced NOX and CO emissions and improved operational behavior of the SEV combustor. The high pressure tests demonstrated robust SEV burner/lance operation with up to 50% lower NOX formation and a more than 70K higher SEV burner inlet temperature compared to the GT24 (2006) hardware. For the GT24 engine with retrofitted upgrade 2011 SEV burner/lance all validation targets were achieved including an extremely robust operation behavior, up to 40% lower GT NOX emissions, significantly lower CO emissions at partload and baseload, a very broad operation window (up to 100K width in SEV combustor inlet temperature) and all measured SEV burner/lance temperatures in the expected range. Sector rig and engine validation results have confirmed the expected SEV burner fuel flexibility (up to 18%-vol. C2+ and up to 5%-vol. hydrogen as standard).

Low NOx Lean Premix Reheat Combustion in Alstom GT24 Gas Turbines

2015 ◽  
Vol 138 (5) ◽  
Author(s):  
Daniel Guyot ◽  
Gabrielle Tea ◽  
Christoph Appel
Keyword(s):  
Gas Turbine ◽  
Gas Turbines ◽  
Fuel Injection ◽  
Test Facility ◽  
Inlet Temperature ◽  
Combustion System ◽  
Operational Flexibility ◽  
Nox Formation ◽  
Term Operation ◽  
Fuel Flexibility

Reducing gas turbine emissions and increasing their operational flexibility are key targets in today's gas turbine market. In order to further reduce emissions and increase the operational flexibility of its GT24 (60 Hz) and GT26 (50 Hz), Alstom has introduced an improved sequential environmental (SEV) burner and fuel lance into its GT24 and GT26 upgrades 2011 sequential reheat combustion system. Sequential combustion is a key differentiator of Alstom GT24/GT26 engines in the F-class gas turbine market. The inlet temperature for the SEV combustor is around 1000 °C and reaction of the fuel/oxidant mixture is initiated through auto-ignition. The recent development of the Alstom sequential combustion system is a perfect example of evolutionary design optimizations and technology transfer between Alstom GT24 and GT26 engines. Better overall performance is achieved through improved SEV burner aerodynamics and fuel injection, while keeping the main features of the sequential burner technology. The improved SEV burner/lance concept has been optimized toward rapid fuel/oxidant mixing for low emissions, improved fuel flexibility with regard to highly reactive fuels (higher C2+ and hydrogen content), and to sustain a wide operation window. The burner front panel features an improved cooling concept based on near-wall cooling as well as integrated acoustics damping devices designed to reduce combustion pulsations, thus extending the SEV combustor's operation window even further. After having been validated extensively in Alstom's high pressure (HP) sector rig test facility, the improved GT24 SEV burner has been retrofitted into a commercial GT24 field engine for full engine validation during long-term operation. This paper presents the obtained HP sector rig and engine validation results for the GT24 (2011) SEV burner/lance hardware with a focus on reduced NOx and CO emissions and improved operational behavior of the SEV combustor. The HP tests demonstrated robust SEV burner/lance operation with up to 50% lower NOx formation and a more than 70 K higher SEV burner inlet temperature compared to the GT24 (2006) hardware. For the GT24 engine with retrofitted upgrade 2011 SEV burner/lance, all validation targets were achieved including an extremely robust operation behavior, up to 40% lower GT NOx emissions, significantly lower CO emissions at partload and baseload, a very broad operation window (up to 100 K width in SEV combustor inlet temperature), and all measured SEV burner/lance temperatures in the expected range. Sector rig and engine validation results have confirmed the expected SEV burner fuel flexibility (up to 18 vol. % C2+ and up to 5 vol. % hydrogen as standard).

Research and Development of 300kW Class Ceramic Gas Turbine Project in Japan

1997 ◽  
Author(s):  
Hironori Arakawa ◽  
Takayuki Suzuki ◽  
Kazufumi Saito ◽  
Shigeru Tamura ◽  
Shinsuke Kishi
Keyword(s):  
Research And Development ◽  
Gas Turbine ◽  
Thermal Efficiency ◽  
Gas Turbines ◽  
Maximum Output Power ◽  
Pollutant Emissions ◽  
Inlet Temperature ◽  
Maximum Output ◽  
Fuel Injector ◽  
Target Values

The ceramic gas turbine (CGT) engine can achieve higher thermal efficiency, lower pollutant emissions, and has a wider fuel tolerance compared to conventional gasoline and diesel engines. Accordingly, research and development of a 300kW class ceramic gas turbine has been performed in Japan as a national project since FY 1988, under the Agency of Industrial Science and Technology (AIST), which is an agency of the Ministry of International Trade and Industry (MITI). The final target of the project is to achieve 42% thermal efficiency at a Turbine Inlet Temperature (TIT) of 1350°C. At present, two different types of ceramic gas turbines (CGT 301 and CGT 302) are under development and operating tests of prototype engines are being carried out. The CGT 301 features removable ceramic blades joined to a metal rotor disk. This 37 blade hybrid rotor of the high pressure stage was hot spin tested at a TIT of 1350°C and the burst of the blades did not occur at the rated speed. A thermal efficiency of 26.4% was achieved at a TIT 1200°C during the first year of prototype operation. Improvement in component parts is ongoing and as a result, improvements in thermal efficiency are forthcoming. The CGT 302 features a lean premixed low-NOx combustor having a primary diffusion burner, a set of main pre-mixed burners, single fuel injector, and air bypass to control combustion. This combustor showed a lower pressure loss and NOx emissions of 5ppm (O2 = 16%), which is less than the allowable value of 70ppm. Recent operating tests of this engine showed a maximum output power and thermal efficiency of 228kW and 36%, respectively, as of November 1996. For both the CGT 301 and CGT 302, more focused research on CGT materials and components, as well as operating tests at 1350°C TIT, are being carried out in order to reach the final target values.

Sign in / Sign up

Export Citation Format

Share Document