Operating Experience and Design Features of Closed Cycle Gas Turbine Power Plants

1956 ◽  
Author(s):  
Curt Keller
Keyword(s):  
Gas Turbine ◽  
Power Plants ◽  
Operating Experience ◽  
Progress Report ◽  
Closed Cycle ◽  
Design Features ◽  
The Usa

This paper is the author’s third progress report in the USA on the AK-closed cycle gas turbine.

Marine

1959 ◽  
Vol 81 (3) ◽  
pp. 311-339
Author(s):  
John W. Sawyer ◽  
Harry M. Simpson
Keyword(s):  
Gas Turbine ◽  
Operating Experience ◽  
Progress Report ◽  
Operating Conditions ◽  
Closed Cycle ◽  
Free Piston ◽  
First Report ◽  
The Future ◽  
Prime Movers ◽  
Future Potential

This is a progress report on the marine gas turbine and free-piston gas turbine during the 5-yr period, 1953–1957. Since the merchant and naval services encompass many similar operating conditions—in spite of many differing requirements—the entire marine field will be reviewed in a single paper. In the first report [18], separate papers appeared on marine, merchant, and naval applications. Open and closed-cycle gas-turbine, nuclear gas-turbine, and free-piston gas-turbine prime movers will be discussed along the following lines: Applications, operating experience, development, advantages, disadvantages, economics, and the future potential in the marine field.

scholarly journals Integrated Coal Gasification Combined Cycle: Current Experience — Future Promise

1996 ◽  
Author(s):  
Bjorn Kaupang ◽  
Douglas M. Todd
Keyword(s):  
Gas Turbine ◽  
Heavy Oil ◽  
Power Plants ◽  
Coal Gasification ◽  
Operating Experience ◽  
Heat Rate ◽  
Combined Cycle ◽  
The Usa ◽  
Under Construction ◽  
The Cost

Significant progress has been made in the installation and initial operation of several IGCC power plants. At least six IGCC projects are scheduled to enter commercial operation in the USA and in Europe during 1996. Several additional IGCC projects are under construction or under development using many different gasification systems. Gas turbine manufacturers introduced advanced gas turbine technology in 1995, resulting in IGCC efficiency for coal and heavy oil-fired plants of up to 50% (LHV) with plant costs consistent with conventional steam plants. Gas turbine developments specifically aimed at IGCC applications allow the use of environmentally low quality fuels without added impact on the environment. This paper discusses the current operating experience of several of the initial IGCC plants and illustrates the very attractive fuels flexibility with the combined-cycle plants burning naphtha or distillate oils initially with later conversions to IGCC burning lignite, heavy oil or orimulsion. This paper also discusses the heat rate and output performance capabilities of the IGCC with H level gas turbine technology and the resulting impacts on the cost of electricity from IGCC plants.

scholarly journals EXPERIMENTAL FACILITY FOR THE STUDY OF THE PROCESSES IN MIXING LOW-PRESSURE HEATERS OF K-1000-60/3000 TURBINES

2020 ◽  
Vol 2 (61) ◽  
pp. 42-50
Author(s):  
A. Smychok ◽  
◽  
V. Gerliga ◽  
V. Zaporozhan ◽  
M. Panchenko ◽  
...  
Keyword(s):  
Power Plants ◽  
Thermal Power ◽  
Experimental Studies ◽  
Operating Experience ◽  
Low Pressure ◽  
Main Task ◽  
Experimental Facility ◽  
Design Features ◽  
Technical Problems ◽  
Hydraulic Processes

Nowadays, the development of nuclear energy is determined by solving the set of scientific and technical problems that provides reliable, safe and sustainable work of the operated and designed NPPs. At the same time different accident conditions and likelihood (probability) of variant equipment operating failures are analyzed. Obtained operating experience of the mixing low-pressure heaters (LPH) at thermal power plants (TPP) and NPPs shows that pulsations occur in some operation regimes of LPH turbine which lead to inner element destructions of LPH and pipeline malfunctions. These circumstances negatively affect operation of equipment that locates after LPH in condensate-supply tract. Consequently, unit capacity factor and economic indicators descend since troubleshooting for LPH mechanisms require some time and material resources. This work presents the experimental facility design and description of main design features of the facility components. The stand was designed to study the processes that lead to the vibration appearance in mixing LPH in condensate-supply tract of K-1000-60/3000 turbines. The main task of scale modeling is the need to observe equivalent conditions of the thermal-hydraulic processes behavior in the model in relation to full-scale equipment. To solve this problem using ANSYS code a preliminary simulation of hydraulic processes occurring in the experimental facility was performed. This allowed to determine in advance certain design features in the design of given facility. The results of experimental studies of the developed facility should allow to develop measures for reduction or complete elimination of vibrations in mixing LPH, as well as to validate computer programs for design analysis of stationary and non-stationary thermal-hydraulic processes in the specified equipment and designed measures testing.

Closed Cycle Gas Turbines: An ECAS Update — Part 1

1979 ◽  
Author(s):  
H. C. Daudet ◽  
C. A. Kinney
Keyword(s):  
Heat Exchanger ◽  
Gas Turbine ◽  
Gas Turbines ◽  
Power Plants ◽  
System Analysis ◽  
Public Utility ◽  
Department Of Energy ◽  
Closed Cycle ◽  
Study Program ◽  
Study Results

This paper presents a discussion of the significant results of a study program conducted for the Department of Energy to evaluate the potential for closed cycle gas turbines and the associated combustion heater systems for use in coal fired public utility power plants. Two specific problem areas were addressed: (a) the identification and analysis of system concepts which offer high overall plant efficiency consistent with low cost of electricity (COE) from coal-pile-to-bus-bar, and (b) the identification and conceptual design of combustor/heat exchanger concepts compatible for use as the cycle gas primary heater for those plant systems. The study guidelines were based directly upon the ground rules established for the ECAS studies to facilitate comparison of study results. Included is a discussion of a unique computer model approach to accomplish the system analysis and parametric studies performed to evaluate entire closed cycle gas turbine utility power plants with and without Rankine bottoming cycles. Both atmospheric fluidized bed and radiant/convective combustor /heat exchanger systems were addressed. Each incorporated metallic or ceramic heat exchanger technology. The work culminated in conceptual designs of complete coal fired, closed cycle gas turbine power plants. Critical component technology assessment and cost and performance estimates for the plants are also discussed.

Construction and Initial Operating Experience on Two Prototype Gas Turbine Power Plants

1974 ◽  
Author(s):  
P. J. Hoppe ◽  
B. Keller
Keyword(s):  
Gas Turbine ◽  
Power Plants ◽  
Operating Experience ◽  
Plant Construction ◽  
Blue Lake

In this paper, the authors describe construction and initial operating experience on two prototype gas turbine power plants located thousands of miles apart: Isefjordvaerket’s 140-MW plant at Kyndby, Denmark, built by Brown Boveri-Sulzer Turbomachinery (BST) and Northern States Power’s 200-MW plant at Blue Lake, Minnesota, built by Turbodyne Corporation (TBD). The paper provides a unique opportunity of comparing two approaches to a similar plant construction concept.

The Nuclear Gas Turbine: Towards Realization After Half a Century of Evolution

1995 ◽  
Author(s):  
Colin F. McDonald
Keyword(s):  
Power Systems ◽  
Gas Turbine ◽  
Nuclear Reactor ◽  
Electrical Power ◽  
District Heating ◽  
Small Scale ◽  
Closed Cycle ◽  
Furnace Gases ◽  
The Usa ◽  
Space Power Systems

This paper has been written exactly 50 years after the first disclosure of a closed-cycle gas turbine concept with a simplistic uranium heater. Clearly, this plant was ahead of its time in terms of technology readiness, and the closed-cycle gas turbine was initially deployed in a cogeneration mode burning dirty fuels (e.g., coal, furnace gases). In the 1950s through the mid 1980s about 20 of these plants operated providing electrical power and district heating for European cities. The basic concept of a nuclear gas turbine plant was demonstrated in the USA on a small scale in 1961 with a mobile closed-cycle nitrogen gas turbine [330 KW(e)] coupled with a nuclear reactor. In the last three decades, closed-cycle gas turbine research and development, particularly in the U.S. has focused on space power systems, but today the utility size gas turbine-modular helium reactor (GT-MHR) is on the verge of being realized. The theme of this paper traces the half century of closed-cycle gas turbine evolution, and discusses the recent enabling technologies (e.g., magnetic bearings, compact recuperator) that now make the GT-MHR close to realization. The author would like to dedicate this paper to the late Professor Curt Keller who in 1935 filed the first closed-cycle gas turbine patent in Switzerland, and who exactly 50 years ago, first described a power plant involving the coupling of a helium gas turbine with a uranium heater.

Applying Combined Pinch and Exergy Analysis to Closed-Cycle Gas Turbine System Design

1995 ◽  
Vol 117 (1) ◽  
pp. 47-52 ◽  
Author(s):  
V. R. Dhole ◽  
J. P. Zheng
Keyword(s):  
Power Systems ◽  
Gas Turbine ◽  
Gas Turbines ◽  
Power Plants ◽  
Exergy Analysis ◽  
Energy Savings ◽  
Design Guidelines ◽  
Closed Cycle ◽  
Practical Design ◽  
Pinch Technology

Pinch technology has developed into a powerful tool for thermodynamic analysis of chemical processes and associated utilities, resulting in significant energy savings. Conventional pinch analysis identifies the most economical energy consumption in terms of heat loads and provides practical design guidelines to achieve this. However, in analyzing systems involving heat and power, for example, steam and gas turbines, etc., pure heat load analysis is insufficient. Exergy analysis, on the other hand, provides a tool for heat and power analysis, although at times it does not provide clear practical design guidelines. An appropriate combination of pinch and exergy analysis can provide practical methodology for the analysis of heat and power systems. The methodology has been successfully applied to refrigeration systems. This paper introduces the application of a combined pinch and exergy approach to commercial power plants with a demonstration example of a closed-cycle gas turbine (CCGT) system. Efficiency improvement of about 0.82 percent (50.2 to 51.02 percent) can be obtained by application of the new approach. More importantly, the approach can be used as an analysis and screening tool for the various design improvements and is generally applicable to any commercial power generation facility.

Sign in / Sign up

Export Citation Format

Share Document