Stability and Response of Rotors Supported on Active Magnetic Bearings

1993 ◽  
Author(s):  
K. Ramesh ◽  
R. G. Kirk
Keyword(s):  
Finite Element ◽  
Stability Analysis ◽  
Transfer Matrix ◽  
Magnetic Bearings ◽  
Active Magnetic Bearings ◽  
Finite Element Program ◽  
Element Program ◽  
Matrix Codes ◽  
The Stability

Abstract A PC-based program has been developed which is capable of performing stability analysis and response calculations of rotor-bearing systems. The paper discusses the modeling of rotors supported on active magnetic bearings (AMB) and highlights the advantages in the modeling using the finite element method, over the transfer matrix method. An 8-stage centrifugal compressor supported on AMB was chosen for the case study. The results for the stability analysis, obtained using the finite element program was compared with those obtained by the well established transfer matrix codes. The results of unbalance response, including the effects of sensor non collocation are presented and this demonstrates how an AMB supported rotor can experience a synchronous instability for selected sensor locations and balance distributions.

The Analysis of Double-Nonlinearity Stability of Concrete Filled Steel-Tube Arch Bridge

2013 ◽  
Vol 724-725 ◽  
pp. 1709-1713 ◽  
Author(s):  
Xing Han ◽  
Bing Zhu ◽  
Gui Man Liu ◽  
Jun Ping Wang ◽  
Bao Shan Xiang
Keyword(s):  
Finite Element ◽  
Nonlinear Analysis ◽  
Steel Tube ◽  
Eigenvalue Analysis ◽  
Finite Element Program ◽  
Arch Bridge ◽  
Concrete Filled Steel Tube ◽  
Element Program ◽  
Load Displacement ◽  
The Stability

Taking a concrete-filled steel tube arch bridge with a span of 80m for example, the paper studies the stability of this bridge by using the general finite element program. The analysis introduces the method to deal with the stability of these bridges by FEM, also demonstrates the result of the eigenvalue analysis and dual nonlinear analysis according to an example. In eigenvalue analysis, the influence of the brace and the X-brace to this arch bridge`s stability are compared under different load cases; in dual nonlinear analysis, the load-displacement curves of three different load cases of the rib failure are given. All of these are some valuable to the stability of the concrete-filled steel tube arch bridge.

Research on the Nonlinear Stability of the Steel Spatial Arch Truss with 120m Span and 0.2 Rise-Span Ratio

2013 ◽  
Vol 351-352 ◽  
pp. 305-308
Author(s):  
Jing Liu ◽  
Hai Wang Li ◽  
Yue Nan Sun ◽  
Xue Feng Shu
Keyword(s):  
Finite Element ◽  
Stability Analysis ◽  
Nonlinear Stability ◽  
Axial Stress ◽  
Finite Element Program ◽  
Instability Modes ◽  
Plastic Stability ◽  
Element Program ◽  
Material Nonlinear ◽  
Double Nonlinear

The elasto-plastic stability analysis on the steel spatial arch truss with 120m span and 0.2 rise-span ratio is carried out with the finite element program ANSYS. In the analyses, two conditions which are the geometric and material nonlinear, double nonlinear under different initial geometric defects are considered. The results show that the instability modes of arch trusses are all asymmetric instability of plane, and that the buckling load and plastic development of the four arch trusses with L/500, L/400, L/300 and L/200 initial geometric defects are decreased with the increase of different initial geometric defects, and that the axial stress of all web members is about the same, but the value of which does not exceed 235Mpa.

scholarly journals The impact of drilling and slitting construction on damage field: evolution characteristics in low-permeability coal seam

2021 ◽  
Vol 37 ◽  
pp. 205-215
Author(s):  
Heng Chen ◽  
Hongmei Cheng ◽  
Aibin Xu ◽  
Yi Xue ◽  
Weihong Peng
Keyword(s):  
Finite Element ◽  
Rock Mass ◽  
Damage Mechanics ◽  
Effective Strain ◽  
Secondary Development ◽  
Distribution Area ◽  
Finite Element Program ◽  
Element Program ◽  
Mining Face ◽  
The Impact

ABSTRACT The fracture field of coal and rock mass is the main channel for gas migration and accumulation. Exploring the evolution law of fracture field of coal and rock mass under the condition of drilling and slitting construction has important theoretical significance for guiding efficient gas drainage. The generation and evolution process of coal and rock fissures is also the development and accumulation process of its damage. Therefore, based on damage mechanics and finite element theory, the mathematical model is established. The damage variable of coal mass is defined by effective strain, the elastoplastic damage constitutive equation is established and the secondary development of finite element program is completed by FORTRAN language. Using this program, the numerical simulation of drilling and slitting construction of the 15-14120 mining face of Pingdingshan No. 8 Mine is carried out, and the effects of different single borehole diameters, different kerf widths and different kerf heights on the distribution area of surrounding coal fracture field and the degree of damage are studied quantitatively. These provide a theoretical basis for the reasonable determination of the slitting and drilling arrangement parameters at the engineering site.

scholarly journals Stability charts based on the finite element method for underground cavities in soft carbonate rocks: validation through case-study applications

2019 ◽  
Vol 19 (10) ◽  
pp. 2079-2095 ◽  
Author(s):  
Michele Perrotti ◽  
Piernicola Lollino ◽  
Nunzio Luciano Fazio ◽  
Mario Parise
Keyword(s):  
Finite Element ◽  
Safety Margin ◽  
Structural Elements ◽  
The Finite Element Method ◽  
Geometrical Features ◽  
Overall Stability ◽  
Underground Cavities ◽  
The Stability ◽  
Rock Mechanical Properties

Abstract. The stability of man-made underground cavities in soft rocks interacting with overlying structures and infrastructures represents a challenging problem to be faced. Based upon the results of a large number of parametric two-dimensional (2-D) finite-element analyses of ideal cases of underground cavities, accounting for the variability both cave geometrical features and rock mechanical properties, specific charts have been recently proposed in the literature to assess at a preliminary stage the stability of the cavities. The purpose of the present paper is to validate the efficacy of the stability charts through the application to several case studies of underground cavities, considering both quarries collapsed in the past and quarries still stable. The stability graphs proposed by Perrotti et al. (2018) can be useful to evaluate, in a preliminary way, a safety margin for cavities that have not reached failure and to detect indications of predisposition to local or general instability phenomena. Alternatively, for sinkholes that already occurred, the graphs may be useful in identifying the conditions that led to the collapse, highlighting the importance of some structural elements (as pillars and internal walls) on the overall stability of the quarry system.

Finite Element Analysis on the Deformation of Energy-Saving Wire-Mesh Frame Wallboard

2014 ◽  
Vol 501-504 ◽  
pp. 731-735
Author(s):  
Li Zhang ◽  
Kang Li
Keyword(s):  
Finite Element ◽  
Energy Saving ◽  
Theoretical Basis ◽  
Steel Wire ◽  
Wire Mesh ◽  
Design Parameters ◽  
Element Analysis ◽  
Finite Element Program ◽  
Element Program ◽  
Influence Degree

This paper analyzes the influence degree of related design parameters of wire-mesh frame wallboard on deformation through finite element program, providing theoretical basis for the design and test of steel wire rack energy-saving wallboard.

scholarly journals Numerical Analyses of Earthquake Induced Liquefaction and Deformation Behaviour of an Upstream Tailings Dam

2017 ◽  
Vol 2017 ◽  
pp. 1-12 ◽  
Author(s):  
Muhammad Auchar Zardari ◽  
Hans Mattsson ◽  
Sven Knutsson ◽  
Muhammad Shehzad Khalid ◽  
Maria V. S. Ask ◽  
...  
Keyword(s):  
Finite Element ◽  
Seismic Event ◽  
Deformation Behaviour ◽  
Ground Surface ◽  
Tailings Dam ◽  
Limited Extent ◽  
Northern Sweden ◽  
Finite Element Program ◽  
Dynamic Analyses ◽  
Element Program

Much of the seismic activity of northern Sweden consists of micro-earthquakes occurring near postglacial faults. However, larger magnitude earthquakes do occur in Sweden, and earthquake statistics indicate that a magnitude 5 event is likely to occur once every century. This paper presents dynamic analyses of the effects of larger earthquakes on an upstream tailings dam at the Aitik copper mine in northern Sweden. The analyses were performed to evaluate the potential for liquefaction and to assess stability of the dam under two specific earthquakes: a commonly occurring magnitude 3.6 event and a more extreme earthquake of magnitude 5.8. The dynamic analyses were carried out with the finite element program PLAXIS using a recently implemented constitutive model called UBCSAND. The results indicate that the magnitude 5.8 earthquake would likely induce liquefaction in a limited zone located below the ground surface near the embankment dikes. It is interpreted that stability of the dam may not be affected due to the limited extent of the liquefied zone. Both types of earthquakes are predicted to induce tolerable magnitudes of displacements. The results of the postseismic slope stability analysis, performed for a state after a seismic event, suggest that the dam is stable during both the earthquakes.

A preprocessor for the finite element program SAP IV

1981 ◽  
Vol 17 (12) ◽  
pp. 1779-1789
Author(s):  
E. Haugeneder ◽  
W. Prochazka ◽  
P. Tavolato
Keyword(s):  
Finite Element ◽  
Finite Element Program ◽  
Element Program
Sign in / Sign up

Export Citation Format

Share Document