Layout of Plate Structures for Improved Dynamic Response Using a Homogenization Method

1993 ◽  
Author(s):  
Ciro A. Soto ◽  
Alejandro R. Diaz
Keyword(s):  
Dynamic Response ◽  
Natural Frequencies ◽  
Homogenization Method ◽  
Automotive Application ◽  
Optimum Shape ◽  
Design Practice ◽  
Plate Structures ◽  
Simply Supported ◽  
Varying Thickness ◽  
Square Plate

Abstract A model to compute average properties for Mindlin plates of rapidly varying thickness was introduced in [SOT93]. The model was designed to be of use in computations of the optimum shape and layout of plates using the technique introduced by Bendsøe and Kikuchi [BEN88]. In this paper we discuss the utilization of the model to determine the optimum layout of plate structures that maximizes a function of the structure’s natural frequencies. A simply supported square plate is used to illustrate the problem of optimization in the presence of repeated natural frequencies. An automotive application is presented to illustrate the usefulness in design practice.

On the Buckling of Certain Optimum Plate Structures with Linearly Varying Thickness

1959 ◽  
Vol 10 (2) ◽  
pp. 145-148 ◽  
Author(s):  
E. H. Mansfield
Keyword(s):  
Local Buckling ◽  
Constant Thickness ◽  
Sectional Area ◽  
Longitudinal Compression ◽  
Cross Sectional ◽  
Plate Structures ◽  
Buckling Loads ◽  
Simply Supported ◽  
Euler Buckling ◽  
Varying Thickness

SummaryThis paper is concerned with the buckling under uniform longitudinal compression of a variety of structures composed of plates whose thickness tapers linearly to zero across the section. Such structures include the angle of Fig. 1, the strut of cruciform section of Fig. 2 and the simply-supported strip of Fig. 3. For given cross-sectional area and overall dimensions (e.g. length of arm) the sections with linearly varying thickness achieve a greater buckling load (assuming that local buckling, rather than Euler buckling, is the criterion) than sections with any other smooth variation of thickness. These particular sections are therefore optimum sections and, even if they may not be used in practice, provide a convenient yardstick for purposes of comparison. The buckling loads are considerably greater than those for the corresponding “constant thickness” sections.

Vibration of Centrally Stiffened Rectangular Plate

1961 ◽  
Vol 65 (610) ◽  
pp. 695-697 ◽  
Author(s):  
C. L. Kirk
Keyword(s):  
Orthotropic Plate ◽  
Natural Frequencies ◽  
Flexural Vibration ◽  
Empirical Method ◽  
Rectangular Plates ◽  
Stiffened Plate ◽  
Simply Supported ◽  
Stiffening Ribs ◽  
Square Plate ◽  
Semi Empirical

Natural frequencies of free flexural vibration of rectangular plates may, in many cases, be considerably increased by attaching to the plate one or more elastic stiffening ribs parallel to one edge, or by casting or machining the plate and stiffeners integrally.Hoppmann has determined by a semi-empirical method the natural frequencies of an integrally stiffened simply-supported square plate, using the concept of a homogeneous orthotropic plate of uniform thickness having elastic compliances which are equivalent to those of the stiffened plate. Filippov has obtained the exact solution for the fundamental frequency of a simply-supported square plate having a number of equally spaced stiffeners and has considered the effect of point loads applied to the stiffeners in a direction perpendicular to the plane of the plate.

Large Deflection of a Rectangular Plate Resting on a Pasternak-Type Elastic Foundation

1977 ◽  
Vol 44 (3) ◽  
pp. 509-511 ◽  
Author(s):  
P. K. Ghosh
Keyword(s):  
Rectangular Plate ◽  
Elastic Foundation ◽  
Large Deflection ◽  
Lateral Load ◽  
Bending Moments ◽  
Shear Forces ◽  
Simply Supported ◽  
Base Parameters ◽  
Square Plate

The problem of large deflection of a rectangular plate resting on a Pasternak-type foundation and subjected to a uniform lateral load has been investigated by utilizing the linearized equation of plates due to H. M. Berger. The solutions derived and based on the effect of the two base parameters have been carried to practical conclusions by presenting graphs for bending moments and shear forces for a square plate with all edges simply supported.

Natural Frequency of Laminated Composite Plates Using a Sinusoidal Theory

2014 ◽  
Vol 709 ◽  
pp. 148-152
Author(s):  
Guo Qing Zhou ◽  
Ji Wang ◽  
Song Xiang
Keyword(s):  
Differential Equations ◽  
Analytical Method ◽  
Deformation Theory ◽  
Natural Frequencies ◽  
Shear Deformation Theory ◽  
Laminated Composite ◽  
Composite Plates ◽  
Laminated Composite Plates ◽  
Simply Supported ◽  
Sinusoidal Shear Deformation Theory

Sinusoidal shear deformation theory is presented to analyze the natural frequencies of simply supported laminated composite plates. The governing differential equations based on sinusoidal theory are solved by a Navier-type analytical method. The present results are compared with the available published results which verify the accuracy of sinusoidal theory.

A semi-analytical three-dimensional free vibration analysis of functionally graded curved panels integrated with piezoelectric layers

2014 ◽  
Vol 21 (4) ◽  
pp. 571-587 ◽  
Author(s):  
Hamid Reza Saeidi Marzangoo ◽  
Mostafa Jalal
Keyword(s):  
Boundary Conditions ◽  
Vibration Analysis ◽  
Natural Frequencies ◽  
Differential Quadrature Method ◽  
Three Dimensional ◽  
Free Vibration Analysis ◽  
Functionally Graded ◽  
Simply Supported ◽  
Piezoelectric Layers ◽  
Curved Panels

AbstractFree vibration analysis of functionally graded (FG) curved panels integrated with piezoelectric layers under various boundary conditions is studied. A panel with two opposite edges is simply supported, and arbitrary boundary conditions at the other edges are considered. Two different models of material property variations based on the power law distribution in terms of the volume fractions of the constituents and the exponential law distribution of the material properties through the thickness are considered. Based on the three-dimensional theory of elasticity, an approach combining the state space method and the differential quadrature method (DQM) is used. For the simply supported boundary conditions, closed-form solution is given by making use of the Fourier series expansion, and applying the differential quadrature method to the state space formulations along the axial direction, new state equations about state variables at discrete points are obtained for the other cases such as clamped or free-end conditions. Natural frequencies of the hybrid curved panels are presented by solving the eigenfrequency equation, which can be obtained by using edges boundary conditions in this state equation. The results obtained for only FGM shell is verified by comparing the natural frequencies with the results obtained in the literature.

Response of Liquid in Cylindrical Tank with Rigid Annual Baffle Considering Damping Effect

2011 ◽  
Vol 255-260 ◽  
pp. 3687-3691 ◽  
Author(s):  
Jia Dong Wang ◽  
Ding Zhou ◽  
Wei Qing Liu
Keyword(s):  
Free Surface ◽  
Dynamic Response ◽  
Potential Function ◽  
Natural Frequencies ◽  
Damping Ratio ◽  
Cylindrical Tank ◽  
Generalized Coordinates ◽  
Damping Effect ◽  
Total Potential ◽  
Free Surface Wave

Sloshing response of liquid in a rigid cylindrical tank with a rigid annual baffle under horizontal sinusoidal loads was studied. The effect of the damping was considered in the analysis. Natural frequencies and modes of the system have been calculated by using the Sub-domain method. The total potential function under horizontal loads is assumed to be the sum of the tank potential function and the liquid perturbed function. The expression of the liquid perturbed function is obtained by introducing the generalized coordinates. Substituting potential functions into the free surface wave conditions, the dynamic response equations including the damping effect are established. The damping ratio is calculated by Maleki method. The liquid potential are obtained by solving the dynamic response equations of the system.

Natural Frequencies of Parallelogrammic Plates Using Characteristic Orthogonal Polynomials in Rayleigh-Ritz Method

1992 ◽  
Author(s):  
L. T. Lee ◽  
W. F. Pon
Keyword(s):  
Boundary Conditions ◽  
Coordinate System ◽  
Orthogonal Polynomials ◽  
Natural Frequencies ◽  
Ritz Method ◽  
Energy Functional ◽  
Comprehensive Treatment ◽  
Energy Functionals ◽  
Simply Supported ◽  
Cartesian Coordinate

Abstract Natural frequencies of parallelogrammic plates are obtained by employing a set of beam characteristic orthogonal polynomials in the Rayleigh-Ritz method. The orthogonal polynomials are generalted by using a Gram-Schmidt process, after the first member is constructed so as to satisfy all the boundary conditions of the corresponding beam problems accompanying the plate problems. The strain energy functional and kinetic energy functionals are transformed from Cartesian coordinate system to a skew coordinate system. The natural frequencies obtained by using the orthogonal polynomial functions are compared with those obtained by other methods with all four edges clamped boundary conditions and greet agreements are found between them. The natural frequencies for parallelogrammic plates with other boundary conditions, such as four edges simply supported, clamped-free and simply supported-free, are also obtained. This method is considered as a better and accurate comprehensive treatment for this type of problems.

A Note on the Lowest Natural Frequency of a Square Plate Point-Supported at the Corners

1962 ◽  
Vol 66 (616) ◽  
pp. 240-241 ◽  
Author(s):  
C. L. Kirk
Keyword(s):  
Natural Frequency ◽  
Natural Frequencies ◽  
Present Note ◽  
Flexural Vibration ◽  
Approximate Solutions ◽  
Mode Shapes ◽  
Electronic Digital Computer ◽  
Isotropic Plates ◽  
Four Corners ◽  
Square Plate

Recently Cox and Boxer determined natural frequencies and mode shapes of flexural vibration of uniform rectangular isotropic plates, that have free edges and pinpoint supports at the four corners. In their analysis, they obtain approximate solutions of the differential equation through the use of finite difference expressions and an electronic digital computer. In the present note, the frequency expression and mode shape for a square plate, vibrating at the lowest natural frequency, are determined by considerations of energy. The values obtained are compared with those given in reference.

Free Vibration of Thin-Walled Open Section Beams With Unconstrained Damping Treatment

1981 ◽  
Vol 48 (1) ◽  
pp. 169-173 ◽  
Author(s):  
S. Narayanan ◽  
J. P. Verma ◽  
A. K. Mallik
Keyword(s):  
Free Vibration ◽  
Cross Section ◽  
Transverse Vibration ◽  
Natural Frequencies ◽  
Vibration Characteristics ◽  
Numerical Results ◽  
Simply Supported ◽  
Clamped Beams ◽  
Thin Walled ◽  
Open Cross Section

Free-vibration characteristics of a thin-walled, open cross-section beam, with unconstrained damping layers at the flanges, are investigated. Both uncoupled transverse vibration and the coupled bending-torsion oscillations, of a beam of a top-hat section, are considered. Numerical results are presented for natural frequencies and modal loss factors of simply supported and clamped-clamped beams.

Sign in / Sign up

Export Citation Format

Share Document