Numerical Solution of Constrained Systems Using Jet Spaces

Author(s):  
Jukka Tuomela ◽  
Teijo Arponen ◽  
Villesamuli Normi

The major difficulty in simulations of constrained systems is how to avoid drift off and spurious oscillations. We describe results obtained by our method which addresses these issues. Our computational model considers differential equations in jet spaces. In case of multibody systems we use Lagrangian formalism to derive the equations of motion. Constraints and possible invariants (like conservation of energy) are taken into account by restricting the dynamics to an appropriate submanifold of a jet space. We will consider only holonomic constraints in this paper. However, nonholonomic problems can also be formulated and solved with our method.

Author(s):  
S Mohammad Mirtaheri ◽  
Hassan Zohoor

Based on Lagrangian mechanics, use of velocity constraints as a special set of quasi-velocities helps derive explicit equations of motion. The equations are applicable to holonomic and nonholonomic constrained multibody systems. It is proved that in proposed quasi-spaces, the Lagrange multipliers are eliminated from equations of motion; however, it is possible to compute these multipliers once the equations of motion have been solved. The novelty of this research is employing block matrix inversion to find the analytical relations between the parameters of quasi-velocities and equations of motion. In other words, this research identifies arbitrary submatrices and their effects on equations of motion. Also, the present study aimed to provide appropriate criteria to select arbitrary parameters to avoid singularity, reduce constraints violations, and improve computational efficiency. In order to illustrate the advantage of this approach, the simulation results of a 3-link snake-like robot with nonholonomic constraints and a four-bar mechanism with holonomic constraints are presented. The effectiveness of the proposed approach is demonstrated by comparing the constraints violation at the position and velocity levels, conservation of the total energy, and computational efficiency with those obtained via the traditional methods.


Author(s):  
Olivier A. Bauchau ◽  
Andre´ Laulusa

A hallmark of multibody dynamics is that most formulations involve a number of constraints. Typically, when redundant generalized coordinates are used, equations of motion are simpler to derive but constraint equations are present. While the dynamic behavior of constrained systems is well understood, the numerical solution of the resulting equations, potentially of differential-algebraic nature, remains problematic. Many different approaches have been proposed over the years, all presenting advantages and drawbacks: the sheer number and variety of methods that have been proposed indicate the difficulty of the problem. A cursory survey of the literature reveals that the various methods fall within broad categories sharing common theoretical foundations. This paper summarizes the theoretical foundations to the enforcement in constraints in multibody dynamics problems. Next, methods based on the use of Lagrange’s equation of the first kind, which are index-3 differential algebraic equations are reviewed. Methods leading to a minimum set of equations are discussed; in view of the numerical difficulties associated with index-3 approaches, reduction to a minimum set is often performed, leading to a number of practical algorithms using methods developed for ordinary differential equations. Finally, alternative approaches to dealing with high index differential algebraic equations, based on index reduction techniques, are reviewed and discussed. Constraint violation stabilization techniques that have been developed to control constraint drift are also reviewed. These techniques are used in conjunction with algorithms that do not exactly enforce the constraints. Control theory forms the basis for a number of these methods. Penalty based techniques have also been developed, but the augmented Lagrangian formulation presents a more solid theoretical foundation. In contrast to constraint violation stabilization techniques, constraint violation elimination techniques enforce exact satisfaction of the constraints, at least to machine accuracy. Finally, as the finite element method has gained popularity for the solution of multibody systems, new techniques for the enforcement of constraints has been developed in that framework. The goal of this paper is to review the features of these methods, assess their accuracy and efficiency, underline the relationship among the methods, and recommend approaches that seem to perform better than others.


Author(s):  
Andreas Müller ◽  
Shivesh Kumar

AbstractDerivatives of equations of motion (EOM) describing the dynamics of rigid body systems are becoming increasingly relevant for the robotics community and find many applications in design and control of robotic systems. Controlling robots, and multibody systems comprising elastic components in particular, not only requires smooth trajectories but also the time derivatives of the control forces/torques, hence of the EOM. This paper presents the time derivatives of the EOM in closed form up to second-order as an alternative formulation to the existing recursive algorithms for this purpose, which provides a direct insight into the structure of the derivatives. The Lie group formulation for rigid body systems is used giving rise to very compact and easily parameterized equations.


2010 ◽  
Vol 25 (02) ◽  
pp. 135-141
Author(s):  
H. A. ELEGLA ◽  
N. I. FARAHAT

Motivated by the Hamilton–Jacobi approach of constrained systems, we analyze the classical structure of a four-dimensional superstring. The equations of motion for a singular system are obtained as total differential equations in many variables. The path integral quantization based on Hamilton–Jacobi approach is applied to quantize the system, and the integration is taken over the canonical phase space coordinates.


Author(s):  
Jesús Cardenal ◽  
Javier Cuadrado ◽  
Eduardo Bayo

Abstract This paper presents a multi-index variable time step method for the integration of the equations of motion of constrained multibody systems in descriptor form. The basis of the method is the augmented Lagrangian formulation with projections in index-3 and index-1. The method takes advantage of the better performance of the index-3 formulation for large time steps and of the stability of the index-1 for low time steps, and automatically switches from one method to the other depending on the required accuracy and values of the time step. The variable time stepping is accomplished through the use of an integral of motion, which in the case of conservative systems becomes the total energy. The error introduced by the numerical integrator in the integral of motion during consecutive time steps provides a good measure of the local integration error, and permits a simple and reliable strategy for varying the time step. Overall, the method is efficient and powerful; it is suitable for stiff and non-stiff systems, robust for all time step sizes, and it works for singular configurations, redundant constraints and topology changes. Also, the constraints in positions, velocities and accelerations are satisfied during the simulation process. The method is robust in the sense that becomes more accurate as the time step size decreases.


Author(s):  
Werner Schiehlen ◽  
Makoto Iwamura

In this paper, we consider the problem to minimize the energy consumption for controlled multibody systems utilizing passive elastic elements for energy storage useful for robot systems in manufacturing. Firstly, based on the linearized equations of motion, we analyze the relationship between the consumed energy and the operating time, and the optimal trajectory using optimal control theory. Then, we verify the analytical solution by comparing with the numerical one computed considering the full nonlinear dynamics. After that we derive a condition for the operating time to be optimal, and propose the optimal design method for springs. Finally, we show the effectiveness of the design method by applying it to a 2DOF manipulator.


Author(s):  
Stefan Reichl ◽  
Wolfgang Steiner

This work presents three different approaches in inverse dynamics for the solution of trajectory tracking problems in underactuated multibody systems. Such systems are characterized by less control inputs than degrees of freedom. The first approach uses an extension of the equations of motion by geometric and control constraints. This results in index-five differential-algebraic equations. A projection method is used to reduce the systems index and the resulting equations are solved numerically. The second method is a flatness-based feedforward control design. Input and state variables can be parameterized by the flat outputs and their time derivatives up to a certain order. The third approach uses an optimal control algorithm which is based on the minimization of a cost functional including system outputs and desired trajectory. It has to be distinguished between direct and indirect methods. These specific methods are applied to an underactuated planar crane and a three-dimensional rotary crane.


2021 ◽  
Author(s):  
Sotirios Natsiavas ◽  
Panagiotis Passas ◽  
Elias Paraskevopoulos

Abstract This work considers a class of multibody dynamic systems involving bilateral nonholonomic constraints. An appropriate set of equations of motion is employed first. This set is derived by application of Newton’s second law and appears as a coupled system of strongly nonlinear second order ordinary differential equations in both the generalized coordinates and the Lagrange multipliers associated to the motion constraints. Next, these equations are manipulated properly and converted to a weak form. Furthermore, the position, velocity and momentum type quantities are subsequently treated as independent. This yields a three-field set of equations of motion, which is then used as a basis for performing a suitable temporal discretization, leading to a complete time integration scheme. In order to test and validate its accuracy and numerical efficiency, this scheme is applied next to challenging mechanical examples, exhibiting rich dynamics. In all cases, the emphasis is put on highlighting the advantages of the new method by direct comparison with existing analytical solutions as well as with results of current state of the art numerical methods. Finally, a comparison is also performed with results available for a benchmark problem.


1998 ◽  
Vol 13 (33) ◽  
pp. 2653-2663 ◽  
Author(s):  
YONG-WAN KIM ◽  
YOUNG-JAI PARK ◽  
SEUNG-KOOK KIM

We show how to systematically derive the exact form of local symmetries for the Abelian Proca and CS models, which are converted into first-class constrained systems by the BFT formalism, in the Lagrangian formalism. As a result, without resorting to a Hamiltonian formulation we obtain the well-known U(1) symmetry for the gauge-invariant Proca model, while showing that for the CS model there exist novel symmetries as well as the usual symmetry transformations.


Sign in / Sign up

Export Citation Format

Share Document