Methodic of Rational Cutting Conditions Determination for 3-D Shaped Detail Milling Based on the Process Numerical Simulation

2014 ◽  
Author(s):  
Igor Kiselev ◽  
Sergey Voronov
Keyword(s):  
Cutting Forces ◽  
Complex Geometry ◽  
Chip Thickness ◽  
Cutting Conditions ◽  
Dynamical Model ◽  
Processing Route ◽  
Technological Parameters ◽  
Machined Surface ◽  
Geometry Modeling ◽  
Milling Dynamics

The paper is devoted for the analysis of the dynamics effect on the 5-axis milling process of flexible details. The integrated model of milling dynamics composed by block principle in the paper is presented. The model consist of: 1) dynamical model of tool; 2) dynamical model of machined detail based on Finite Element Method (FEM); 3) phenomenological model of cutting forces and 4) algorithm of geometry modeling for instant machined chip thickness calculation. Regeneration mechanism of cutting and calculation of the machined surface are into this algorithm embedded. The elaborated model is adapted for 5-axis processing of the profiled details with 3-D complex geometry. Alteration of workpiece dynamic characteristics while the allowance removal is considered by the special algorithm of FEM grid changing based on the results of cutting geometry modeling. The results of modeling give us opportunity determine cutting forces, estimate the machined surface quality, calculate the magnitude and the character of tool and detail vibrations under the specified cutting conditions. The conception of increasing the process quality and the machinability for 3-D shaped details machining is offered in the paper. Applying the specified efficient conditions the undesired dynamical effects can be excluded on the base of the results of multi-variant simulation for milling dynamics varying the technological parameters at the different region of the processing route.

Analysis of Cutting Forces and Machining Error in Ball End Milling of Cylindrical Surfaces

2011 ◽  
Vol 328-330 ◽  
pp. 560-564
Author(s):  
Ba Sheng Ouyang ◽  
Guo Xiang Lin ◽  
Yong Hui Tang
Keyword(s):  
Cutting Forces ◽  
End Milling ◽  
Cutting Conditions ◽  
Machining Error ◽  
Machined Surface ◽  
Convex Surfaces ◽  
Machining Errors ◽  
End Mills ◽  
Tool Deflections ◽  
Cutting Modes

Cutting forces and machining error in contouring of concave and convex surfaces using helical ball end mills are theoretically investigated. The cutting forces are evaluated based on the theory of oblique cutting. The machining errors resulting from the tool deflections due to these forces are evaluated at various points of the machined surface. The influence of various cutting conditions and cutting modes on machining error is investigated and discussed.

Machining Evaluation of High-Speed Milling for Thin-Wall Machining of Al7075-T651

2014 ◽  
Vol 541-542 ◽  
pp. 785-791 ◽  
Author(s):  
Joon Young Koo ◽  
Pyeong Ho Kim ◽  
Moon Ho Cho ◽  
Hyuk Kim ◽  
Jeong Kyu Oh ◽  
...  
Keyword(s):  
Surface Roughness ◽  
Surface Integrity ◽  
Cutting Forces ◽  
High Speed ◽  
Surface Condition ◽  
Cutting Conditions ◽  
Depth Of Cut ◽  
Thin Wall ◽  
Machined Surface ◽  
High Speed Milling

This paper presents finite element method (FEM) and experimental analysis on high-speed milling for thin-wall machining of Al7075-T651. Changes in cutting forces, temperature, and chip morphology according to cutting conditions are analyzed using FEM. Results of machining experiments are analyzed in terms of cutting forces and surface integrity such as surface roughness and surface condition. Variables of cutting conditions are feed per tooth, spindle speed, and axial depth of cut. Cutting conditions to improve surface integrity were investigated by analysis on cutting forces and surface roughness, and machined surface condition.

Dynamic Simulation of the Micro-Milling Process Including Minimum Chip Thickness and Size Effect

2012 ◽  
Vol 504-506 ◽  
pp. 1269-1274 ◽  
Author(s):  
François Ducobu ◽  
Edouard Rivière-Lorphèvre ◽  
Enrico Filippi
Keyword(s):  
Size Effect ◽  
Cutting Forces ◽  
Mechanistic Model ◽  
Orthogonal Cutting ◽  
Chip Thickness ◽  
Milling Process ◽  
Cutting Conditions ◽  
Micro Milling ◽  
Minimum Chip Thickness ◽  
Physical Phenomena

Micro-milling with a cutting tool is a manufacturing technique that allows production of parts ranging from several millimeters to several micrometers. The technique is based on a downscaling of macroscopic milling process. Micro-milling is one of the most effective process to produce complex three-dimensional micro-parts, including sharp edges and with a good surface quality. Reducing the dimensions of the cutter and the cutting conditions requires taking into account physical phenomena that can be neglected in macro-milling. These phenomena include a size effect (nonlinear rising of specific cutting force when chip thickness decreases), the minimum chip thickness (under a given dimension, no chip can be machined) and the heterogeneity of the material (the size of the grains composing the material is significant as compared to the dimension of the chip). The aim of this paper is to introduce some phenomena, appearing in micromilling, in the mechanistic dynamic simulation software ‘dystamill’ developed for macro-milling. The software is able to simulate the cutting forces, the dynamic behavior of the tool and the workpiece and the kinematic surface finish in 2D1/2 milling operation (slotting, face milling, shoulder milling,…). It can be used to predict chatter-free cutting condition for example. The mechanistic model of the cutting forces is deduced from the local FEM simulation of orthogonal cutting. This FEM model uses the commercial software ABAQUS and is able to simulate chip formation and cutting forces in an orthogonal cutting test. This model is able to reproduce physical phenomena in macro cutting conditions (including segmented chip) as well as specific phenomena in micro cutting conditions (minimum chip thickness and size effect). The minimum chip thickness is also taken into account by the global model. The results of simulation for the machining of titanium alloy Ti6Al4V under macro and micro milling condition with the mechanistic model are presented discussed. This approach connects together local machining simulation and global models.

Finite Element Analysis of Cutting Forces in High Speed Machining

2006 ◽  
Vol 532-533 ◽  
pp. 753-756 ◽  
Author(s):  
Jun Zhao ◽  
Xing Ai ◽  
Zuo Li Li
Keyword(s):  
Finite Element ◽  
Cutting Force ◽  
Cutting Forces ◽  
High Speed ◽  
Fem Simulation ◽  
Chip Thickness ◽  
Cutting Conditions ◽  
Cutting Process ◽  
Undeformed Chip Thickness ◽  
High Speed Cutting

The Finite Element Method (FEM) has proven to be an effective technique to investigate cutting process so as to improve cutting tool design and select optimum cutting conditions. The present work focuses on the FEM simulation of cutting forces in high speed cutting by using an orthogonal cutting model with variant undeformed chip thickness under plane-strain condition to mimic intermittent cutting process such as milling. High speed cutting of 45%C steel using uncoated carbide tools are simulated as the application of the proposed model. The updated Lagrangian formulation is adopted in the dynamic FEM simulation in which the normalized Cockroft and Latham damage criterion is used as the ductile fracture criterion. The simulation results of cutting force components under different cutting conditions show that both the thrust cutting force and the tangential cutting force increase with the increase in undeformed chip thickness or feed rate, whereas decrease with the increase in cutting speed. Some important aspects of modeling the high speed cutting are discussed as well to expect the future work in FEM simulation.

scholarly journals Identification of Technological Parameters of Ni-Alloys When Machining by Monolithic Ceramic Milling Tool

2017 ◽  
Vol 14 (2) ◽  
pp. 14-18
Author(s):  
Andrej Czán ◽  
Ondrej Kubala ◽  
Igor Danis ◽  
Tatiana Czánová ◽  
Jozef Holubják ◽  
...  
Keyword(s):  
Surface Quality ◽  
Nickel Alloys ◽  
Cutting Conditions ◽  
Technological Parameters ◽  
Machined Surface ◽  
Analysis And Evaluation ◽  
Ni Alloys ◽  
Milling Tool ◽  
Conventional Coating

Abstract The ever-increasing production and the usage of hard-to-machine progressive materials are the main cause of continual finding of new ways and methods of machining. One of these ways is the ceramic milling tool, which combines the pros of conventional ceramic cutting materials and pros of conventional coating steel-based insert. These properties allow to improve cutting conditions and so increase the productivity with preserved quality known from conventional tools usage. In this paper, there is made the identification of properties and possibilities of this tool when machining of hard-to-machine materials such as nickel alloys using in airplanes engines. This article is focused on the analysis and evaluation ordinary technological parameters and surface quality, mainly roughness of surface and quality of machined surface and tool wearing.

scholarly journals Vibrations of Flat-End Cutter Entering Workpiece Process: Modeling, Simulations, and Experiments

2018 ◽  
Vol 2018 ◽  
pp. 1-23 ◽  
Author(s):  
Ming Luo ◽  
Qi Yao
Keyword(s):  
Cutting Forces ◽  
Chip Thickness ◽  
Machining Process ◽  
Time Varying ◽  
Time Domain Simulation ◽  
Cutting Depth ◽  
Machined Surface ◽  
Dynamic Cutting Force ◽  
Force Calculation ◽  
Cycle Path

During all the machining process, the milling cutter has to enter the workpiece either from the boundary or from the machined/unmachined surface, due to the change of machining sequence/cutter or the variation of cutting depth. Unlike the stable cutting process, the contact between cutter and machined workpiece changes significantly in the entering process, resulting in vibration and leaving marks on the machined surface. Aiming at in-depth understanding the mechanism of this phenomenon, this paper presents a novel time-domain simulation model to predict the dynamic response of the cutter during the entering process. Two typical entering conditions, including entering from the workpiece boundary and from the machined surface along the cycle path, are modeled based on the dynamic cutting force calculation by considering dynamic undeformed chip thickness created by consequential teeth engagement. Then, it is synthesized with the time-varying immersion angle and exit angle of cutter teeth in the entering process to simulate the dynamic cutting forces and cutter vibrations. To validate the developed model, eight conditions in boundary entering and six conditions in cycle path entering are carried out by comparing the collected data and the predicted results. Results show that the developed model could precisely predict the dynamic cutting forces and cutter vibration, especially the forces and displacements under the varied cutter-workpiece contact.

Study on the machining process of micro V-shaped groove by using a revolving tip

2017 ◽  
Vol 232 (9) ◽  
pp. 1523-1537
Author(s):  
Bo Xue ◽  
Yongda Yan ◽  
Gaojie Ma ◽  
Zhenjiang Hu
Keyword(s):  
Cutting Forces ◽  
Chip Thickness ◽  
Chip Morphology ◽  
Machining Process ◽  
Burr Formation ◽  
Uncut Chip Thickness ◽  
Machined Surface ◽  
Advantages And Disadvantages

This paper proposed a machining method for micro V-shaped grooves, which was achieved by introducing the revolving trajectory on the basis of tip scratching process. By coordinating the revolving direction and the tip orientation, four kinds of revolving scratches were developed which had the revolving radii larger than the groove depths. It was found that there were two revolving scratches among these four being able to eliminate the side burrs and produce much smaller cutting forces during machining grooves compared to the traditional scratch, respectively named as the up-milling of face-forward and the down-milling of edge-forward. By considering the tip geometry in the traditional scratching process, the burr formation has been studied which was mainly affected by the effect of chip interference and the amount of uncut chip thickness. By analyzing the machining trajectory, the undeformed chip, the machined surface and the chip morphology, the reason why the up-milling of face-forward and the down-milling of edge-forward had good performances for machining V-grooves was elucidated in detail. Meanwhile, the differences between these two revolving scratches were discussed, and their advantages and disadvantages were also given.

Prediction of Ball End Milling Forces

1996 ◽  
Vol 118 (1) ◽  
pp. 95-103 ◽  
Author(s):  
G. Yu¨cesan ◽  
Y. Altıntas¸
Keyword(s):  
Cutting Forces ◽  
End Milling ◽  
Chip Thickness ◽  
Cutting Conditions ◽  
Analytic Representation ◽  
Rake Face ◽  
Uncut Chip Thickness ◽  
Ball End Milling ◽  
Helical Flute ◽  
Milling Forces

Mechanics of milling with ball ended helical cutters are modeled. The model is based on the analytic representation of ball shaped helical flute geometry, and its rake and clearance surfaces. It is assumed that friction and pressure loads on the rake face are proportional to the uncut chip thickness area. The load on the flank contact face is concentrated on the in cut portion of the cutting edge. The pressure and friction coefficients are identified from a set of slot ball end milling tests at different feeds and axial depth of cuts, and are used to predict the cutting forces for various cutting conditions. The experimentally verified model accurately predicts the cutting forces in three Cartesian directions.

Cutting Force Analysis to Determine the Performance of Micro End Milling Process of Silicon Wafer

2007 ◽  
Author(s):  
Rusnaldy ◽  
Tae Jo Ko ◽  
Hee Sool Kim
Keyword(s):  
Cutting Force ◽  
Silicon Wafer ◽  
Cutting Forces ◽  
End Milling ◽  
Chip Thickness ◽  
Tool Material ◽  
Machining Process ◽  
Tool Geometry ◽  
Machined Surface ◽  
Micro End Milling

There is a lack of fundamental understanding of micro-end-milling of silicon wafer, specifically basic understanding of material removal mechanism, cutting forces and machined surface integrity in micro scale machining of silicon. It is necessary to determine the forces generated during the cutting operation due to chip thickness along with tool geometry, tool material properties and workpiece properties because cutting forces will provide vital information for the design, modeling and control of the machining process. In this study, cutting force data can be used to determine cutting regime machining of silicon wafer.

Sign in / Sign up

Export Citation Format

Share Document