Topological and Kinematic Performance Analysis of a Class of 5-SPS Parallel Mechanisms With Line Moving Platform

2016 ◽  
Author(s):  
Huiping Shen ◽  
Jun Huang
Keyword(s):  
Parallel Mechanism ◽  
Parallel Mechanisms ◽  
Spherical Joint ◽  
Input Output ◽  
Forward Displacement ◽  
Joint Structure ◽  
Workspace Analysis ◽  
Kinematic Performance ◽  
Moving Platform ◽  
Position And Orientation

This paper is to design a class of manipulators capable of producing five DOF (degree-of-freedom) output motion for controlling the position and orientation of a line. Four novel 5-SPS parallel mechanisms with LMP (Line Moving Platform) are proposed according to the structure coupling-reducing principle proposed by authors on the basis of an existing 5-SPS parallel mechanism with LMP. Three key topology characteristics, such as structure coupling degree, output position and orientation characteristics, input-output kinematic decoupling, and the position workspace characteristics, as the fourth characteristic, of these five 5-SPS parallel mechanisms with LMP are calculated and compared respectively. It shows that the use of concentric spherical joints on the moving platform can reduce coupling degree of mechanisms and simplify the forward displacement and the workspace analysis. The mechanisms with triple-spherical-joint structure have input-output motion decoupling. Therefore, each of the 5-SPS parallel mechanisms with LMP has its own advantages and applications. This paper provides a foundation for engineering design, optimal selection and potential application of the five 5-SPS parallel mechanisms with LMP.

Design and workspace analysis of a 3-degree-of-freedom parallel swivel head with large tilting capacity

2015 ◽  
Vol 231 (10) ◽  
pp. 1838-1849 ◽  
Author(s):  
Jiangzhen Guo ◽  
Dan Wang ◽  
Rui Fan ◽  
Wuyi Chen
Keyword(s):  
Machine Tool ◽  
Parallel Mechanism ◽  
Degree Of Freedom ◽  
Parallel Mechanisms ◽  
Spherical Joint ◽  
Hybrid Machine Tool ◽  
Tilting Angle ◽  
Workspace Analysis ◽  
Hybrid Machine ◽  
Orientation Workspace

Traditional parallel mechanisms are usually characterized by small tilting capability. To overcome this problem, a 3-degree-of-freedom parallel swivel head with large tilting capacity is proposed in this article. The proposed parallel swivel head, which is structurally developed from a conventional 3-PRS parallel mechanism, can achieve a large tilting capability by means of structural improvements. First, a modified spherical joint with a maximum tilting angle of ±120° is devised to diminish the physical restrictions on the orientation workspace. Second, a UPS typed leg is introduced for the sake of singularity elimination. The superiority of the proposed parallel swivel head is theoretically proved by investigations of singularity-free orientation workspace and then is experimentally validated using a prototype fabricated. The theoretical and experimental results illustrate that the proposed parallel swivel head has a large tilting capacity and thus can be used as swivel head for a hybrid machine tool which is designed to be capable of realizing both horizontal and vertical machining.

KINEMATICS AND WORKSPACE ANALYSIS OF A 3 DEGREE OF FREEDOM PARALLEL MECHANISM WITH PARALLELOGRAM LINKAGE

2017 ◽  
Vol 41 (5) ◽  
pp. 922-935
Author(s):  
HongJun San ◽  
JunSong Lei ◽  
JiuPeng Chen ◽  
ZhengMing Xiao ◽  
JunJie Zhao
Keyword(s):  
Monte Carlo ◽  
Monte Carlo Method ◽  
Analytical Method ◽  
Theoretical Basis ◽  
Parallel Mechanism ◽  
Graphical Method ◽  
Degree Of Freedom ◽  
Workspace Analysis ◽  
Fixed Base ◽  
Moving Platform

In this paper, a 3-DOF translational parallel mechanism with parallelogram linkage was studied. According to the space vector relation between the moving platform and the fixed base, the direct and inverse position solutions of this mechanism was deduced through analytical method. In addition, the error of the algorithm was analyzed, and the algorithm had turned out to be effective and to have the satisfactory computational precision. On the above basis, the workspace of this mechanism was found through graphical method, which was compared with that of finding through Monte Carlo method, and there was the feasibility for analyzing the workspace of the mechanism by graphical method. The characteristic of the mechanism was analyzed by comparing the results of two analysis methods, which provided a theoretical basis for the application of the mechanism.

Dynamic Response and Nonlinear Characteristics of Spatial Parallel Mechanism With Spherical Clearance Joint

2019 ◽  
Vol 14 (4) ◽  
Author(s):  
Chen Xiulong ◽  
Li Yuewen ◽  
Jia Yonghao
Keyword(s):  
Dynamic Response ◽  
Contact Force ◽  
Dynamic Equation ◽  
Parallel Mechanism ◽  
Joint Clearance ◽  
Spherical Joint ◽  
Nonlinear Characteristics ◽  
Clearance Joint ◽  
Spatial Parallel Mechanism ◽  
Moving Platform

Spherical joint is a type of common kinematic pair in spatial parallel mechanism. The existence of spherical joint clearance has many adverse effects on the mechanism. A method of forecasting the dynamic behaviors of spatial parallel mechanism with spherical clearance joint is proposed. The 4-UPS-UPU spatial parallel mechanism with spherical clearance is taken as the research object, the dynamic response, and nonlinear characteristics of the mechanism are studied. The kinematic model and the contact force model of the spherical clearance are established. The dynamic equation of the spatial parallel mechanism with spherical joint clearance is derived by Newton–Euler method. The above-mentioned dynamic equation is solved by using the ODE113 function that is based on a variable order numerical differential algorithm in matlab. The dynamic responses of moving platform with different clearance values are analyzed. The contact force and the center trajectory of the sphere at the spherical joint are obtained. In addition, the phase trajectory, Poincare map, and bifurcation diagram are analyzed, and the nonlinear characteristics of the spherical clearance joint and the moving platform are obtained. By comparing the results, such as the acceleration of moving platform and the contact force, with virtual prototype simulation, the correctness of the dynamic equation of the spatial parallel mechanism with spherical clearance joint and the analysis results are verified. The researches show that the change of clearance value has a great influence on the motion state of spherical clearance joint, and chaos phenomena appears in the clearance joint with the increase in the clearance value. And the impact phenomenon appears between the spherical joint elements, which makes the mechanism generated vibration.

scholarly journals Reconfiguration Analysis of a 3-DOF Parallel Mechanism

Robotics ◽  
2019 ◽  
Vol 8 (3) ◽  
pp. 66
Author(s):  
Maurizio Ruggiu ◽  
Xianwen Kong
Keyword(s):  
Parallel Mechanism ◽  
Degrees Of Freedom ◽  
Operation Mode ◽  
Parallel Mechanisms ◽  
Universal Joint ◽  
Kinematic Chains ◽  
Constraint Equations ◽  
The Third ◽  
Equilateral Triangles ◽  
Moving Platform

This paper deals with the reconfiguration analysis of a 3-DOF (degrees-of-freedom) parallel manipulator (PM) which belongs to the cylindrical parallel mechanisms family. The PM is composed of a base and a moving platform shaped as equilateral triangles connected by three serial kinematic chains (legs). Two legs are composed of two universal (U) joints connected by a prismatic (P) joint. The third leg is composed of a revolute (R) joint connected to the base, a prismatic joint and universal joint in sequence. A set of constraint equations of the 1-RPU−2-UPU PM is derived and solved in terms of the Euler parameter quaternion (a.k.a. Euler-Rodrigues quaternion) representing the orientation of the moving platform and of the Cartesian coordinates of the reference point on the moving platform. It is found that the PM may undergo either the 3-DOF PPR or the 3-DOF planar operation mode only when the base and the moving platform are identical. The transition configuration between the operation modes is also identified.

A Systematical Approach for Structure Synthesis of Parallel Mechanisms Based on Single-Open-Chain Modules and Its Application

2009 ◽  
Author(s):  
Ting-Li Yang ◽  
An-Xin Liu ◽  
Qiong Jin ◽  
Yu-Feng Luo ◽  
Lu-Bin Hang ◽  
...  
Keyword(s):  
Parallel Mechanism ◽  
Systematic Approach ◽  
Screw Theory ◽  
Parallel Mechanisms ◽  
Type Synthesis ◽  
Open Chain ◽  
Structure Synthesis ◽  
Vector Algebra ◽  
Algebra Theory ◽  
Position And Orientation

Based on previous research results presented by authors, this paper proposes a novel systematic approach for structure synthesis of all parallel mechanisms (excluding Bennett mechanism etc), which is totally different from the approaches based on screw theory and based on displacement subgroup. Main characteristics of this approach are: (a) the synthesized mechanisms are non-instantaneous ones, and (b) only simple mathematical tools (vector algebra, theory of sets, etc.) are used. Main steps of this approach include: (1) Determining functional and structural requirements of the parallel mechanism to be synthesized, such as position and orientation characteristic (POC) matrix, degree of freedom (DOF), etc. (2) Type synthesis of branches. (3) Assembling of branches (determining the geometry constraint conditions among the branches attached between the moving platform and the frame, and checking the DOF). (4) Identifying the inactive joints. (5) Selecting the actuating joints. In order to illustrate the whole procedure, the type synthesis of spherical parallel mechanisms is studied using this approach.

Kinematics and Workspace Analysis of 3-RPP Parallel Mechanism

2013 ◽  
Vol 456 ◽  
pp. 146-150
Author(s):  
Zhi Jiang Xie ◽  
Jun Zhang ◽  
Xiao Bo Liu
Keyword(s):  
Parallel Mechanism ◽  
Degrees Of Freedom ◽  
Parallel Mechanisms ◽  
Vector Method ◽  
Workspace Analysis ◽  
Inverse Solutions ◽  
Three Degrees Of Freedom

This paper designed a kind of parallel mechanism with three degrees of freedom, the freedom and movement types of the robot are analyzed in detail, the parallel mechanisms Kinematics positive and inverse solutions are derived through using the vector method. And at last its workspace is analyzed and studied systematically.

Position and Orientation Characteristic Equation for Topological Design of Parallel Mechanisms

2008 ◽  
Author(s):  
Ting-Li Yang ◽  
An-Xin Liu ◽  
Qiong Jin ◽  
Yu-Feng Luo ◽  
Hui-Ping Shen ◽  
...  
Keyword(s):  
Topological Structure ◽  
Parallel Mechanism ◽  
Screw Theory ◽  
Parallel Mechanisms ◽  
Output Link ◽  
Geometrical Meaning ◽  
Operation Rules ◽  
The Matrix ◽  
Position And Orientation ◽  
Symbolic Operation

This paper presents the explicit mapping relations between topological structure of parallel mechanism and position and orientation characteristic (in short, POC) of its motion output link. It deals with: (1) The symbolic representation and the invariant of topological structure of mechanism; (2) The matrix representation of POC of motion output link; (3) The POC equations of parallel mechanism and its symbolic operation rules. The symbolic operation involves simple mathematic tools and fewer operation rules, and has clear geometrical meaning. So, it is easy to use. The forward operation of the POC equations can be used for structural analysis; its inverse operation can be used for structural synthesis. The method proposed in this paper is totally different from the methods based on screw theory and based on displacement subgroup.

Evaluation of the Kinematic Performance of a 3-RRS Parallel Mechanism

Robotica ◽  
2020 ◽  
pp. 1-12
Author(s):  
Manxin Wang ◽  
Qiusheng Chen ◽  
Haitao Liu ◽  
Tian Huang ◽  
Hutian Feng ◽  
...  
Keyword(s):  
Standard Deviation ◽  
Parallel Mechanism ◽  
Jacobian Matrix ◽  
Mean Value ◽  
Spherical Joint ◽  
Performance Indices ◽  
Active Joint ◽  
Strongly Coupled ◽  
The Mean ◽  
Kinematic Performance

SUMMARY This paper proposes a set of novel indices for evaluating the kinematic performance of a 3-RRS (R and S denote revolute and spherical joint respectively, R denotes active joint.), parallel mechanism whose translational and rotational movements are strongly coupled. First, the indices are formulated using the decoupled overall Jacobian matrix, which is developed using coordinate transformation. Then, the influences of the homogeneous dimensionless parameters on these indices are investigated. In addition, the dimension synthesis of the 3-RRS parallel mechanism is carried out by minimizing the mean value of the kinematic performance indices and their standard deviation. The results demonstrate that the established approach facilitates good global kinematic performance of the parallel mechanism.

Workspace Analysis of Parallel Manipulator for Telemicromanipulation Systems

2001 ◽  
Vol 13 (5) ◽  
pp. 488-496 ◽  
Author(s):  
Noriaki Ando ◽  
◽  
Masahiro Ohta ◽  
Kohei Gonda ◽  
Hideki Hashimoto
Keyword(s):  
Kinematic Analysis ◽  
Parallel Mechanism ◽  
Parallel Manipulator ◽  
Parallel Mechanisms ◽  
Dual Systems ◽  
Position Accuracy ◽  
Control Scheme ◽  
Workspace Analysis ◽  
Manipulator Control ◽  
Vr Simulator

This paper describes the research results on telemicromanipulation systems for microlevel tasks. Because of its better manipulation precision, stiffness and speed characteristics, the parallel mechanism micromanipulator was chosen to compose our systems. First, the kinematic analysis of our original manipulator mechanism is performed. Then, the structure of our parallel manipulator, control scheme, and experimental results are shown. Position accuracy and device control characteristics are analyzed and the feasibility of the use of parallel mechanisms for micromanipulator is then discussed. A parallel manipulator motion is restricted by 3 factors: mechanical limits of the passive joints, collision between links and actuators limitations. Results of the numerical workspace analysis considering the above factors are shown. We are proposing the use of dual manipulators for implementing improved real manipulation systems. The first kinematics and workspace analysis of dual systems using the VR simulator are also shown.

Forward displacement analysis of a new 1CCC–5SPS parallel mechanism using Gröbner theory

2009 ◽  
Vol 223 (5) ◽  
pp. 1233-1241 ◽  
Author(s):  
D Gan ◽  
Q Liao ◽  
J S Dai ◽  
S Wei ◽  
L D Seneviratne
Keyword(s):  
Parallel Mechanism ◽  
Polynomial Equation ◽  
Polynomial Equations ◽  
Geometrical Constraint ◽  
Degree Polynomial ◽  
Forward Displacement ◽  
Constraint Equations ◽  
Moving Platform ◽  
Forward Kinematic ◽  
Forward Displacement Analysis

A new parallel mechanism 1CCC–5SPS which has distance and angle constraints is introduced in this article. Degree of freedom and forward kinematic analysis of this new parallel mechanism are presented, in which four equivalent polynomial equations are obtained from the original six geometrical constraint equations. The Gröbner basis theory is used with the four equations and the problem of forward displacement is reduced to a 40th degree polynomial equation in a single unknown from a constructed 10 × 10 Sylvester's matrix which is small in size, from which 40 different locations of the moving platform can be derived. A numerical example confirms the efficiency of the procedure.

Sign in / Sign up

Export Citation Format

Share Document