An Integrated Framework for Gas Turbine Power Plant Operational Modeling and Optimization

2005 ◽  
Author(s):  
Yongjun Zhao ◽  
Vitali Volovoi ◽  
Mark Waters ◽  
Dimitri Mavris
Keyword(s):  
Power Plant ◽  
Electric Power ◽  
Gas Turbine ◽  
Power Market ◽  
Combined Cycle ◽  
Electric Power Market ◽  
Operational Strategies ◽  
Modeling And Optimization ◽  
Operational Optimization ◽  
Gas Turbine Power Plant

The deregulation of the electric power market has introduced strong competition, and as a result, power plant operators strive to develop advanced operational strategies to maximize the profitability given the conditions of the dynamic electric power market. In the deregulated electric power market, the operational strategies should match the evolving electric power market, and be capable of performing an optimization that is specific to a unit operating in a complex environment. A profit based, lifecycle oriented, and unit specific approach is proposed for more effective gas turbine power plant operational optimization, and methodologies for this approach are developed. This paper outlines an integrated, generic environment for unit-specific gas turbine power plant operational modeling and optimization, while several other follow up papers address specific operational optimization problems. The procedure is implemented for a generic combined cycle power plant with single gas turbine with the results demonstrating the feasibility of the proposed approach.

scholarly journals Operation and Test of a New 37 MW Gas Turbine Package Power Plant

1980 ◽  
Author(s):  
J. Jermanok ◽  
R. E. Keith ◽  
E. F. Backhaus
Keyword(s):  
Power Generation ◽  
Power Plant ◽  
Electric Power ◽  
Gas Turbine ◽  
Combined Cycle ◽  
Simple Cycle ◽  
Initial Operation ◽  
Design Features ◽  
Electric Power Generation ◽  
Gas Turbine Power Plant

A new 37-MW, single-shaft gas turbine power plant has been designed for electric power generation, for use in either simple-cycle or combined-cycle applications. This paper describes the design features, instrumentation, installation, test, and initial operation.

Design and Development of a New 37 MW Packaged Gas Turbine Power Plant

1979 ◽  
Author(s):  
J. Jermanok ◽  
G. A. Ludwig
Keyword(s):  
Power Generation ◽  
Power Plant ◽  
Electric Power ◽  
Gas Turbine ◽  
Combined Cycle ◽  
Simple Cycle ◽  
Design Features ◽  
Test Program ◽  
Electric Power Generation ◽  
Gas Turbine Power Plant

A new 37-MW, single-shaft gas turbine power plant has been designed for electric power generation, for use in either simple-cycle or combined-cycle applications. This paper describes the evolution, design features, performance, and test program.

Performance Analysis of a Combined Cycle Power Plant Through Exergetic and Environmental Indices

2017 ◽  
Author(s):  
Edgar Vicente Torres González ◽  
Raúl Lugo Leyte ◽  
Martín Salazar Pereyra ◽  
Helen Denise Lugo Méndez ◽  
Miguel Toledo Velázquez ◽  
...  
Keyword(s):  
Power Plant ◽  
Gas Turbine ◽  
Gas Turbines ◽  
Combined Cycle ◽  
Environmental Indices ◽  
Combined Cycle Power Plant ◽  
Combustion Gases ◽  
Combined Cycle Plant ◽  
Exergetic Analysis ◽  
Gas Turbine Power Plant

In this paper is carried out a comparison between a gas turbine power plant and a combined cycle power plant through exergetic and environmental indices in order to determine performance and sustainability aspects of a gas turbine and combined cycle plant. First of all, an exergetic analysis of the gas turbine and the combined is carried out then the exergetic and environmental indices are calculated for the gas turbine (case A) and the combined cycle (case B). The exergetic indices are exergetic efficiency, waste exergy ratio, exergy destruction factor, recoverable exergy ratio, environmental effect factor and exergetic sustainability. Besides, the environmental indices are global warming, smog formation and acid rain indices. In the case A, the two gas turbines generate 278.4 MW; whereas 415.19 MW of electricity power is generated by the combined cycle (case B). The results show that exergetic sustainability index for cases A and B are 0.02888 and 0.1058 respectively. The steam turbine cycle improves the overall efficiency, as well as, the reviewed exergetic indexes. Besides, the environmental indices of the gas turbines (case A) are lower than the combined cycle environmental indices (case B), since the combustion gases are only generated in the combustion chamber.

Thermo-Economic Assessment Under Electrical Market Uncertainties of a Combined Cycle Gas Turbine Integrated With a Flue Gas-Condensing Heat Pump

2020 ◽  
Author(s):  
Alberto Vannoni ◽  
Andrea Giugno ◽  
Alessandro Sorce
Keyword(s):  
Power Plant ◽  
Power Systems ◽  
Gas Turbine ◽  
Heat Pump ◽  
Flue Gas ◽  
Power Plants ◽  
Greenhouse Gas Emission ◽  
Capital Expenditure ◽  
Combined Cycle ◽  
Gas Turbine Power Plant

Abstract Renewable energy penetration is growing, due to the target of greenhouse-gas-emission reduction, even though fossil fuel-based technologies are still necessary in the current energy market scenario to provide reliable back-up power to stabilize the grid. Nevertheless, currently, an investment in such a kind of power plant might not be profitable enough, since some energy policies have led to a general decrease of both the average price of electricity and its variability; moreover, in several countries negative prices are reached on some sunny or windy days. Within this context, Combined Heat and Power systems appear not just as a fuel-efficient way to fulfill local thermal demand, but also as a sustainable way to maintain installed capacity able to support electricity grid reliability. Innovative solutions to increase both the efficiency and flexibility of those power plants, as well as careful evaluations of the economic context, are essential to ensure the sustainability of the economic investment in a fast-paced changing energy field. This study aims to evaluate the economic viability and environmental impact of an integrated solution of a cogenerative combined cycle gas turbine power plant with a flue gas condensing heat pump. Considering capital expenditure, heat demand, electricity price and its fluctuations during the whole system life, the sustainability of the investment is evaluated taking into account the uncertainties of economic scenarios and benchmarked against the integration of a cogenerative combined cycle gas turbine power plant with a Heat-Only Boiler.

The Elephant in the Room–Gas Turbine Power

2010 ◽  
Vol 132 (12) ◽  
pp. 57-57
Author(s):  
Lee S. Langston
Keyword(s):  
Power Plant ◽  
Electric Power ◽  
Gas Turbine ◽  
Power Plants ◽  
Electrical Power ◽  
Electric Power Industry ◽  
Hydrocarbon Fuel ◽  
Combined Cycle ◽  
Electrical Generator ◽  
Gas Turbine Exhaust

This article presents an overview of gas turbine combined cycle (CCGT) power plants. Modern CCGT power plants are producing electric power as high as half a gigawatt with thermal efficiencies approaching the 60% mark. In a CCGT power plant, the gas turbine is the key player, driving an electrical generator. Heat from the hot gas turbine exhaust is recovered in a heat recovery steam generator, to generate steam, which drives a steam turbine to generate more electrical power. Thus, it is a combined power plant burning one unit of fuel to supply two sources of electrical power. Most of these CCGT plants burn natural gas, which has the lowest carbon content of any other hydrocarbon fuel. Their near 60% thermal efficiencies lower fuel costs by almost half compared to other gas-fired power plants. Their installed capital cost is the lowest in the electric power industry. Moreover, environmental permits, necessary for new plant construction, are much easier to obtain for CCGT power plants.

Sign in / Sign up

Export Citation Format

Share Document