scholarly journals Nonlinear Modal Analysis of Mistuned Periodic Structures Subjected to Dry Friction

2015 ◽  
Author(s):  
C. Joannin ◽  
B. Chouvion ◽  
F. Thouverez ◽  
M. Mbaye ◽  
J.-P. Ousty
Keyword(s):  
Dry Friction ◽  
Periodic Structures ◽  
Forced Response ◽  
Wave Excitation ◽  
Free Response ◽  
Friction Forces ◽  
Bladed Disk ◽  
Complex Modes ◽  
Nonlinear Modal Analysis ◽  
The Impact

This paper deals with the dynamics of a cyclic system, representative of a bladed-disk subjected to dry friction forces, and exhibiting structural mistuning. The nonlinear complex modes are computed by solving the eigenproblem associated to the free response of the whole structure, and are then used to better understand the forced response to a traveling wave excitation. Similarly to the underlying linear system, the tuned model possesses pairs of modes that can be linearly combined to form traveling waves, unlike those of the mistuned structure. However, due to the nonlinearity, the modal properties are not constant but vary with the vibration amplitude in both cases. A qualitative analysis is also performed to assess the impact of the mistuning magnitude on the response, and suggests that further statistical investigations could be of great interest for the design of bladed disks, in terms of vibration mitigation and robustness.

scholarly journals Nonlinear Modal Analysis of Mistuned Periodic Structures Subjected to Dry Friction

2015 ◽  
Vol 138 (7) ◽  
Author(s):  
C. Joannin ◽  
B. Chouvion ◽  
F. Thouverez ◽  
M. Mbaye ◽  
J.-P. Ousty
Keyword(s):  
Dry Friction ◽  
Periodic Structures ◽  
Forced Response ◽  
Wave Excitation ◽  
Free Response ◽  
Friction Forces ◽  
Bladed Disk ◽  
Complex Modes ◽  
Nonlinear Modal Analysis ◽  
The Impact

This paper deals with the dynamics of a cyclic system, representative of a bladed disk subjected to dry friction forces, and exhibits structural mistuning. The nonlinear complex modes are computed by solving the eigenproblem associated to the free response of the whole structure and are then used to better understand the forced response to a traveling wave excitation. Similarly to the underlying linear system, the tuned model possesses pairs of modes that can be linearly combined to form traveling waves, unlike those of the mistuned structure. However, due to the nonlinearity, the modal properties are not constant but vary with the vibration amplitude in both cases. A qualitative analysis is also performed to assess the impact of the mistuning magnitude on the response and suggests that further statistical investigations could be of great interest for the design of bladed-disks, in terms of vibration mitigation and robustness.

Nonlinear Dynamics Analysis of Mistuned Turbine Bladed Disks With Damped Shrouds

2017 ◽  
Author(s):  
Wei Zhao ◽  
Di Zhang ◽  
Lei Sun ◽  
Yonghui Xie
Keyword(s):  
Dry Friction ◽  
Normal Load ◽  
Forced Response ◽  
Vibration Response ◽  
Amplification Coefficient ◽  
Response Analysis ◽  
Friction Damping ◽  
Friction Forces ◽  
Bladed Disk ◽  
The Impact

This paper deals with the real dynamics characteristics of a mistuned steam turbine bladed disk subjected to dry friction forces to better understand the nonlinear mistuning phenomenon. Normal load, which directly affects contact stiffness between interfaces, is chosen as the mistuning parameter. Based on Mindlin model, a forced response analysis of the finite element model of mistuned bladed disk with damped shrouds is performed in ANSYS. Compared with results of other simplified models, a real and complicated nonlinear behavior are observed here. A mass of qualitative analysis is also performed to assess the impact of the mistuning magnitude and excitation level on the vibration. The result shows that, vibration response of bladed disk is affected by excitation and mistuning level significantly. Local amplification coefficient of vibration response in the cases of different mistuning levels is obtained by introducing 10 random mistuned patterns. In addition, frequency splitting phenomena even appears at one of the blades by the contribution of high mistuning levels. According to the calculated results for different excitation levels, the curve of modal damping varying with response amplitude is gained. Lastly, rigidity mistuning is introduced and a combined analysis is performed to investigate the influence of friction damping mistuning on rigidity mistuning in the same 10 random mistuning patterns. The arrangement of dry friction damping mistuning also could be controlled to reduce the local vibration amplification originating from structure mistuning. However, further statistical investigations should be made to gain more information. (CSPE)

Experimental Investigation on Natural Characteristics and Forced Response of Bladed Disks

2011 ◽  
Vol 105-107 ◽  
pp. 34-37
Author(s):  
Zhi Bin Zhao ◽  
Er Ming He ◽  
Hong Jian Wang
Keyword(s):  
Travelling Wave ◽  
Primary Objective ◽  
Forced Response ◽  
Dynamic Responses ◽  
Experimental Investigations ◽  
Wave Excitation ◽  
Bladed Disks ◽  
Bladed Disk ◽  
The Impact ◽  
Natural Characteristics

The results of an experimental investigations on the natural characteristics of tuned bladed disk and forced dynamic responses of mistuned bladed disks are reported. Three experimental bladed disks are discussed: a tuned specimen of periodic symmetry with 12-blades which are nominally identical, and two mistuned specimens, which feature small blade-to-blade variations by adding slight blocks to blade tips. All the specimens are subject to travelling wave excitation produced by piezo-electric actuators sticking on the root of blades. The primary objective of this experiment is to observe the natural characteristics of tuned bladed disk, and to research the impact of mistuning on the forced response blade amplitude magnification. Analytical predictions about the blade amplitude magnification factor are verified by the experimental results.

Nonlinear Modal Analysis and Energy Localization in a Bladed Disk Assembly

2008 ◽  
Author(s):  
F. Georgiades ◽  
M. Peeters ◽  
G. Kerschen ◽  
J. C. Golinval ◽  
M. Ruzzene
Keyword(s):  
Modal Analysis ◽  
Nonlinear Oscillations ◽  
Periodic Structures ◽  
Normal Modes ◽  
Nonlinear Normal Modes ◽  
Energy Localization ◽  
Bladed Disk ◽  
Bladed Disk Assembly ◽  
Nonlinear Modal Analysis ◽  
Nonlinear Normal

The objective of this study is to carry out modal analysis of nonlinear periodic structures using nonlinear normal modes (NNMs). The NNMs are computed numerically with a method developed in [18] that is using a combination of two techniques: a shooting procedure and a method for the continuation of periodic motion. The proposed methodology is applied to a simplified model of a perfectly cyclic bladed disk assembly with 30 sectors. The analysis shows that the considered model structure features NNMs characterized by strong energy localization in a few sectors. This feature has no linear counterpart, and its occurrence is associated with the frequency-energy dependence of nonlinear oscillations.

Analysis of Motion of the Impact-Dry-Friction Pair of Bodies and its Application to the Investigation of the Impact Dampers Dynamics

1999 ◽  
Author(s):  
František Peterka
Keyword(s):  
Analytical Solution ◽  
Numerical Simulations ◽  
Mechanical System ◽  
Relative Motion ◽  
Dry Friction ◽  
Friction Pair ◽  
Strong Nonlinearity ◽  
Friction Forces ◽  
The Impact ◽  
Analysis Of Motion

Abstract The motion with impacts and dry friction forces appears in some mechanical systems as mechanisms with clearances, (e.g., in gearings, pins, slots, guides, valve gears etc.), impact dampers, relays, forming and mailing machines, power pics etc. Such mechanisms include one or more pairs of impacting bodies, which introduce the strong nonlinearity into the system motion. The motion of the general pair of bodies with the both-sides impacts and dry friction forces is assumed (Fig.1). It can be the part of a more complex chain of masses in the mechanical system. Dead zones in the relative motion of bodies can be caused by assumed nonlinearities. The mathematical conditions controlling the numerical simulations or analytical solution of the motion are introduced. The application of this method is explained by the study of the influence of dry friction force on amplitude-frequency characteristics of four types of dynamical and impact dampers with optimised parameters.

The Interaction Between Mistuning and Friction in the Forced Response of Bladed Disk Assemblies

1985 ◽  
Vol 107 (1) ◽  
pp. 205-211 ◽  
Author(s):  
J. H. Griffin ◽  
A. Sinha
Keyword(s):  
Gas Turbine ◽  
Turbine Blades ◽  
Forced Response ◽  
Turbine Engines ◽  
Gas Turbine Engines ◽  
Resonant Response ◽  
Friction Dampers ◽  
Bladed Disk ◽  
The Impact ◽  
Slip Force

This paper summarizes the results of an investigation to establish the impact of mistuning on the performance and design of blade-to-blade friction dampers of the type used to control the resonant response of turbine blades in gas turbine engines. In addition, it discusses the importance of friction slip force variations on the dynamic response of shrouded fan blades.

scholarly journals An Experimental Investigation of Vibration Localization in Bladed Disks: Part II — Forced Response

1997 ◽  
Author(s):  
Marlin J. Kruse ◽  
Christophe Pierre
Keyword(s):  
Experimental Investigation ◽  
Forced Response ◽  
Mode Shapes ◽  
Bladed Disks ◽  
Structural Coupling ◽  
Vibration Localization ◽  
Bladed Disk ◽  
Engine Order ◽  
Localized Mode ◽  
The Impact

The results of an experimental investigation on the effects of random blade mistuning on the forced dynamic response of bladed disks are reported. Two experimental specimens are considered: a nominally periodic twelve-bladed disk with equal blade lengths, and the corresponding mistuned bladed disk, which features slightly different blades of random lengths. Both specimens are subject to traveling-wave excitations delivered by piezo-electric actuators. The primary aim of the experiment is to demonstrate the occurrence of an increase in forced response blade amplitudes due to mistuning, and to verify analytical predictions about the magnitude of these increases. In particular, the impact of localized mode shapes, engine order excitation, and disk structural coupling on the sensitivity of forced response amplitudes to blade mistuning is reported. This work reports one of the first systematic experiments carried out to demonstrate and quantify the effect of mistuning on the forced response of bladed disks.

Piezoelectric Networks for Vibration Suppression of Mistuned Bladed Disks

Aerospace ◽  
2006 ◽  
Author(s):  
Hongbao Yu ◽  
K. W. Wang
Keyword(s):  
Vibration Suppression ◽  
Periodic Structures ◽  
Electric Circuit ◽  
Forced Response ◽  
Bladed Disks ◽  
Vibration Localization ◽  
Bladed Disk ◽  
Engine Order ◽  
The Individual ◽  
Local Circuits

Extensive investigations have been conducted to study the vibration localization phenomenon and the excessive forced response that can be caused by mistuning in bladed disks. Most previous researches have focused on attacking the mistuning issue in the bladed disk, such as reducing the sensitivity of the structure to mistuning through mechanical tailoring, or design optimization. Few have focused on developing effective vibration control methods for such systems. This study extends the piezoelectric network concept, which has been utilized for mode delocalization in periodic structures, to the control of mistuned bladed disks under engine order excitation. A piezoelectric network is synthesized and optimized to effectively suppress the excessive vibration in the bladed disk caused by mistuning. One of the merits of such an approach is that the optimum design is independent of the number of spatial harmonics, or engine orders. Local circuits are first formulated by connecting inductors and resistors with piezoelectric patches on the individual blades. While these local circuits can function as conventional damped absorber when properly tuned, they do not perform well for bladed disks under all engine order excitations. To address this issue, capacitors are introduced to couple the individual local circuitries. Through such networking, an absorber system that is independent of the engine order can be achieved. Monte Carlo simulation is performed to investigate the effectiveness of the network for bladed disk with a range of mistuning level of its mechanical properties. The robustness issue of the network in terms of detuning of the electric circuit parameters is also studied. Finally, negative capacitance is introduced and its effect on the robustness of the network is investigated.

scholarly journals Test-Model Correlation of Dry-Friction Damping Phenomena in Aero-Engines

2008 ◽  
Author(s):  
P. Jean ◽  
C. Gibert ◽  
C. Dupont ◽  
J.-P. Lombard
Keyword(s):  
Dry Friction ◽  
Forced Response ◽  
Test Model ◽  
Friction Damping ◽  
Bladed Disks ◽  
Friction Dampers ◽  
Bladed Disk ◽  
Resonance Frequencies ◽  
Non Linear ◽  
Aero Engines

In order to control the risk of high cycle fatigue of bladed disks, it is important to predict precisely the vibration levels and to design damping solutions to attenuate them. Therefore, Snecma has made some efforts in the last years in order to characterize better the damping in aero-engines. Among the various damping sources, friction damping is particularly difficult to model due to its non-linear behaviour [1]. For that purpose, two methods based on multi-harmonic balance strategy have been especially developed for Snecma, dedicated to the study of the non-linear forced response of bladed disks. The first one enables to model the bladed disk equipped with dry-friction dampers [2], and the second one takes into account intrinsic friction located in disk-blade interface [3]. To validate both models experimentally, a test campaign has been carried out in a vacuum chamber on a rotating bladed disk excited by piezoelectric actuators. The blade shanks have been softened in order to increase friction effects. Experimental results show a regular and reproducible behaviour of the non-linear forced response, over various rotation speed and excitation levels. The contributions of friction dampers and friction in blade attachment have been decoupled thanks to glue applied in the blade root. Both friction phenomena that were observed experimentally at resonance of the blade first bending mode have been reproduced numerically. After updating modeling parameters, an acceptable correlation was found on resonance frequencies, amplitudes and damping levels over the full experimental setup range, which validates these numerical tools for their use in design process.

Sign in / Sign up

Export Citation Format

Share Document