Computational Study of the Effect of Inlet Velocity Profile and Rib Orientation on Heat Transfer in Rotating Ribbed Radial Turbine Cooling Passages

2016 ◽  
Author(s):  
Robert Pearce ◽  
Peter Ireland ◽  
Matthew McGilvray ◽  
Eduardo Romero
Keyword(s):  
Heat Transfer ◽  
Nusselt Number ◽  
Aspect Ratio ◽  
Velocity Profile ◽  
Computational Study ◽  
Velocity Profiles ◽  
Turbine Engine ◽  
Inlet Velocity ◽  
Turbine Cooling ◽  
Radial Turbine

This study investigates the effect of inlet velocity profiles and rib orientations on the Nusselt number distribution within ribbed radial turbine cooling passages representative of systems used in current engines. A triple-pass serpentine passage is investigated, which includes rib turbulators angled at 45° and 180° bends. The first two passes are radially outward and inward respectively and both have an aspect ratio of 1:4, with the third pass radially outward with an aspect ratio of 1:2. Multiple inlet velocity profiles are studied in RANS CFD simulations under both stationary and rotating conditions. The rotating simulations have Reynolds, Rotation and Buoyancy numbers representative of a passage within a HP turbine blade of a gas turbine engine. The flow structure and Nusselt number distributions are discussed in detail with the inlet velocity profile found to have a very large influence in the first pass under both stationary and rotating conditions, with smaller differences observed in the later passes. The rib orientation in the second pass was also investigated, with simulations of reversed and non-reversed rib orientation compared. Improved heat transfer characteristics were found in simulations where the ribs were orientated in the same direction for all three passages. These simulations are compared to experimental results in order to explain previous discrepancies found between experimental and CFD data from an experimental setup with complex inlet geometry.

Computational and Experimental Study of Heat Transfer in Rotating Ribbed Radial Turbine Cooling Passages

2015 ◽  
Author(s):  
Robert Pearce ◽  
Peter Ireland ◽  
Li He ◽  
Matthew McGilvray ◽  
Eduardo Romero
Keyword(s):  
Nusselt Number ◽  
Aspect Ratio ◽  
Jet Engines ◽  
Cfd Simulations ◽  
Turbine Engine ◽  
Turbine Cooling ◽  
Radial Turbine ◽  
Rib Turbulators ◽  
Nusselt Number Distribution ◽  
Cooling Passage

This study investigates the effect of rotation on the Nusselt number distribution within ribbed radial turbine cooling passages representative of systems used in current jet engines. The results are unusual in that the cooling passage length to diameter ratio is engine representative and full distributions of local Nusselt number have been measured using the transient liquid crystal method. The results are compared to RANS CFD simulations and the level of agreement discussed in detail. A triple-pass serpentine passage is investigated, which includes 45° filleted rib-turbulators and 180° curved bends. The first two passes have an aspect ratio of 1:4 which are radially inward and outward respectively, with the final pass being radially outward with an aspect ratio of 1:2. The Reynolds, Rotation and Buoyancy numbers are all representative of a passage within a HP turbine blade of a gas turbine engine at 97000/108000, 0.081/0.088 and 0.052/0.035 respectively for the 1:4/1:2 aspect ratio passages. CFD simulations are found to give good predictions under stationary conditions however significant differences are observed when rotation is introduced. The Nusselt number distributions depend strongly on both rotation and upstream flow conditions created by the specific geometry.

Heat transfer characteristics of nanofluids from a sinusoidal corrugated cylinder placed in a square cavity

2021 ◽  
pp. 095440622110272
Author(s):  
Salaika Parvin ◽  
Nepal Chandra Roy ◽  
Litan Kumar Saha ◽  
Sadia Siddiqa
Keyword(s):  
Heat Transfer ◽  
Nusselt Number ◽  
Rayleigh Number ◽  
Aspect Ratio ◽  
Average Nusselt Number ◽  
Numerical Study ◽  
Heat Transfer Characteristics ◽  
Number Range ◽  
Transfer Characteristics ◽  
Wide Range

A numerical study is performed to investigate nanofluids' flow field and heat transfer characteristics between the domain bounded by a square and a wavy cylinder. The left and right walls of the cavity are at constant low temperature while its other adjacent walls are insulated. The convective phenomena take place due to the higher temperature of the inner corrugated surface. Super elliptic functions are used to transform the governing equations of the classical rectangular enclosure into a system of equations valid for concentric cylinders. The resulting equations are solved iteratively with the implicit finite difference method. Parametric results are presented in terms of streamlines, isotherms, local and average Nusselt numbers for a wide range of scaled parameters such as nanoparticles concentration, Rayleigh number, and aspect ratio. Several correlations have been deduced at the inner and outer surface of the cylinders for the average Nusselt number, which gives a good agreement when compared against the numerical results. The strength of the streamlines increases significantly due to an increase in the aspect ratio of the inner cylinder and the Rayleigh number. As the concentration of nanoparticles increases, the average Nusselt number at the internal and external cylinders becomes stronger. In addition, the average Nusselt number for the entire Rayleigh number range gets enhanced when plotted against the volume fraction of the nanofluid.

Heat Transfer Characteristics of the Phase Change Material Microcapsule Slurry in Solid Phase State

2011 ◽  
Vol 71-78 ◽  
pp. 1187-1190
Author(s):  
Yan Lai Zhang ◽  
Zhong Hao Rao ◽  
Shuang Feng Wang ◽  
Hong Zhang ◽  
Li Jun Li ◽  
...  
Keyword(s):  
Heat Transfer ◽  
Nusselt Number ◽  
Rayleigh Number ◽  
Aspect Ratio ◽  
Phase State ◽  
Solid Phase ◽  
Heat Transfer Characteristics ◽  
Rectangular Enclosure ◽  
Transfer Characteristics ◽  
Change Material

This experiment is performed to investigate heat transfer characteristics with the PCM microcapsule slurry in a solid phase state at a horizontal rectangular enclosure heating from below and cooling from top. Some important parameters are taken into account such as the mass concentration of the PCM, the temperature difference between heating plate and cooling plate, Nusselt number Nu, Rayleigh number Ra and the aspect ratio (width/height) of the horizontal rectangular enclosure. Experiment is done under the thermal steady condition in the PCM microcapsule slurry. Heat transfer coefficient is measured under various temperature differences in PCM mass concentrations of 10% and 20%. And relationship with Nusselt number Nu and Rayleigh number Ra is summarized to various heights H or the aspect ratio (width/height) Ar of enclosure.

Numerical Simulation of Flow and Heat Transfer in Rectangular Channel With Different Aspect Ratios

2016 ◽  
Author(s):  
Liu Wenhua ◽  
Mo Yang ◽  
Li Ling ◽  
Qiao Liang ◽  
Yuwen Zhang
Keyword(s):  
Heat Transfer ◽  
Nusselt Number ◽  
Aspect Ratio ◽  
Characteristic Length ◽  
Rectangular Channel ◽  
Equivalent Diameter ◽  
Correction Coefficient ◽  
Corner Region ◽  
Flow And Heat Transfer ◽  
Aspect Ratios

Turbulent flow and heat transfer in rectangular channel has an important significance in engineering. Conventional approach to caculate Nusselt number of rectangular channel approximately is to take the equivalent diameter as the characteristic length and use the classic circular channel turbulent heat transfer coefficient correlations. However, under these conditions, the caculation error of Nusselt number can reach to 14% and thus this approach can not substantially describe the variation of Nusselt number of rectangular cross-sections with different aspect ratios. Therefore, caculation by using equivalent diameter as the characteristic length in classic experiment formula needs to be corrected. Seven groups of rectangular channel models with different aspect ratios have been studied numerically in this paper. By using standard turbulence model, the flow and heat transfer law of air with varing properties has been studied in 4 different sets of conditions in Reynolds number. The simulation and experimental results are in good agreement. The simulation results show that with the increase of aspect ratio, the cross-sectional average Nusselt number increased, Nusselt number of circumferential wall distributed more evenly and the difference between the infinite plate channel and square channel went up to 25%. The effects of corner region and long\short sides on heat transfer have also been investigated in this paper. Results show that in rectangular channel, heat transfer in corner region is significantly weaker than it in other region. With the increase of aspect ratio, effect on the long side of heat transfer of the short side is gradually reduced, and then eventually eliminates completely in the infinite flat place. Based on the studies above, correction coefficient for rectangular channels with different aspect ratios has been proposed in this paper and the accuracy of the correction coefficient has been varified by numerical simulations. This can reflect the variation of Nusselt number under different aspect ratios more effectively and thus has current significance for project to calculate Nusselt number of heat transfer in rectangular channel.

scholarly journals Effects of a Rotating Cone on the Mixed Convection in a Double Lid-Driven 3D Porous Trapezoidal Nanofluid Filled Cavity under the Impact of Magnetic Field

Nanomaterials ◽  
2020 ◽  
Vol 10 (3) ◽  
pp. 449 ◽  
Author(s):  
Ali J. Chamkha ◽  
Fatih Selimefendigil ◽  
Hakan F. Oztop
Keyword(s):  
Magnetic Field ◽  
Heat Transfer ◽  
Nusselt Number ◽  
Aspect Ratio ◽  
Mixed Convection ◽  
Average Nusselt Number ◽  
Volume Fraction ◽  
Rotational Velocity ◽  
Rotating Cone ◽  
The Impact

Effects of a rotating cone in 3D mixed convection of CNT-water nanofluid in a double lid-driven porous trapezoidal cavity is numerically studied considering magnetic field effects. The numerical simulations are performed by using the finite element method. Impacts of Richardson number (between 0.05 and 50), angular rotational velocity of the cone (between −300 and 300), Hartmann number (between 0 and 50), Darcy number (between 10 − 4 and 5 × 10 − 2 ), aspect ratio of the cone (between 0.25 and 2.5), horizontal location of the cone (between 0.35 H and 0.65 H) and solid particle volume fraction (between 0 and 0.004) on the convective heat transfer performance was studied. It was observed that the average Nusselt number rises with higher Richardson numbers for stationary cone while the effect is reverse for when the cone is rotating in clockwise direction at the highest supped. Higher discrepancies between the average Nusselt number is obtained for 2D cylinder and 3D cylinder configuration which is 28.5% at the highest rotational speed. Even though there are very slight variations between the average Nu values for 3D cylinder and 3D cone case, there are significant variations in the local variation of the average Nusselt number. Higher enhancements in the average Nusselt number are achieved with CNT particles even though the magnetic field reduced the convection and the value is 84.3% at the highest strength of magnetic field. Increasing the permeability resulted in higher local and average heat transfer rates for the 3D porous cavity. In this study, the aspect ratio of the cone was found to be an excellent tool for heat transfer enhancement while 95% enhancements in the average Nusselt number were obtained. The horizontal location of the cone was found to have slight effects on the Nusselt number variations.

scholarly journals CONSTRUCTAL DESIGN OF FINS IN COOLED CAVITIES BY NON-NEWTONIAN FLUIDS

2019 ◽  
Vol 18 (1) ◽  
pp. 85
Author(s):  
J. F. Bueno ◽  
A. R. S. Silva ◽  
T. A. Hirt ◽  
G. F. C. Bogo ◽  
F. S. F. Zinani ◽  
...  
Keyword(s):  
Heat Transfer ◽  
Nusselt Number ◽  
Aspect Ratio ◽  
Newtonian Fluids ◽  
Rheological Parameters ◽  
Flow Index ◽  
Pseudoplastic Fluid ◽  
High Reynolds ◽  
Energy Equations ◽  
Rayleigh Numbers

The present work investigates the Construtal Design of fins inserted in cavities submitted to mixed convection by non-Newtonian fluids. The objective is to obtain the optimum aspect ratio for the fin considering different flow conditions and variations in the rheological parameters of the fluid. The phenomena of flow and heat transfer are modeled by mass balance, momentum and energy equations, and by the generalized Newtonian liquid constitutive equation. The viscosity is modeled as that of a pseudoplastic fluid, using the Carreau function. The optimization problem consists in maximizing heat transfer from the fin using the average Nusselt number. The investigated project variable is the aspect ratio between the edges of the rectangular plane fin profile. The restrictions are the volume of the cavity and the fin. The results are obtained numerically using a finite volume code and a two-dimensional geometry, through exhaustive searching. The results show that the fin geometry influences the maximum Nusselt number mainly for the cases with high Reynolds and Rayleigh numbers, such as was shown in previous studies. The results show that the fin geometry influences the maximum Nusselt number mainly for the cases with high Reynolds and Rayleigh numbers, as was shown in previous studies. It was also found that the Nusselt number increases as the increase in flow intensity, represented by the parameter p, and that the result of the maximum Nusselt number does not change monotonically with the non-Newtonian dimensionless viscosity and with the flow index, showing that the pseudoplasticity of the fluid implies optimal configurations very different from those predicted for Newtonian fluids.

Effects of Variable Viscosity and Thermal Conductivity of CuO-Water Nanofluid on Heat Transfer Enhancement in Natural Convection: Mathematical Model and Simulation

2010 ◽  
Vol 132 (5) ◽  
Author(s):  
Eiyad Abu-Nada
Keyword(s):  
Heat Transfer ◽  
Thermal Conductivity ◽  
Nusselt Number ◽  
Aspect Ratio ◽  
High Aspect Ratio ◽  
Average Nusselt Number ◽  
Volume Fraction ◽  
Variable Viscosity ◽  
Cylinder Surface ◽  
Transfer Enhancement

Heat transfer enhancement in horizontal annuli using variable thermal conductivity and variable viscosity of CuO-water nanofluid is investigated numerically. The base case of simulation used thermal conductivity and viscosity data that consider temperature property dependence and nanoparticle size. It was observed that for Ra≥104, the average Nusselt number was deteriorated by increasing the volume fraction of nanoparticles. However, for Ra=103, the average Nusselt number enhancement depends on aspect ratio of the annulus as well as volume fraction of nanoparticles. Also, for Ra=103, the average Nusselt number was less sensitive to volume fraction of nanoparticles at high aspect ratio and the average Nusselt number increased by increasing the volume fraction of nanoaprticles for aspect ratios ≤0.4. For Ra≥104, the Nusselt number was deteriorated everywhere around the cylinder surface especially at high aspect ratio. However, this reduction is only restricted to certain regions around the cylinder surface for Ra=103. For Ra≥104, the Maxwell–Garnett and the Chon et al. conductivity models demonstrated similar results. But, there was a deviation in the prediction at Ra=103 and this deviation becomes more significant at high volume fraction of nanoparticles. The Nguyen et al. data and the Brinkman model give completely different predictions for Ra≥104, where the difference in prediction of the Nusselt number reached 50%. However, this difference was less than 10% at Ra=103.

Natural Convection Heat Transfer in a Partially Open Square Cavity With a Thin Fin Attached to the Hot Wall

2008 ◽  
Vol 130 (5) ◽  
Author(s):  
Abdullatif Ben-Nakhi ◽  
M. M. Eftekhari ◽  
D. I. Loveday
Keyword(s):  
Heat Transfer ◽  
Nusselt Number ◽  
Rayleigh Number ◽  
Inclination Angle ◽  
Computational Study ◽  
Vertical Wall ◽  
Temperature Fields ◽  
Arbitrary Length ◽  
Flow Modification ◽  
The Impact

A computational study of steady, laminar, natural convective fluid flow in a partially open square enclosure with a highly conductive thin fin of arbitrary length attached to the hot wall at various levels is considered. The horizontal walls and the partially open vertical wall are adiabatic while the vertical wall facing the partial opening is isothermally hot. The current work investigates the flow modification due to the (a) attachment of a highly conductive thin fin of length equal to 20%, 35%, or 50% of the enclosure width, attached to the hot wall at different heights, and (b) variation of the size and height of the aperture located on the vertical wall facing the hot wall. Furthermore, the study examines the impact of Rayleigh number (104⩽Ra⩽107) and inclination of the enclosure. The problem is put into dimensionless formulation and solved numerically by means of the finite-volume method. The results show that the presence of the fin has counteracting effects on flow and temperature fields. These effects are dependent, in a complex way, on the fin level and length, aperture altitude and size, cavity inclination angle, and Rayleigh number. In general, Nusselt number is directly related to aperture altitude and size. However, after reaching a peak Nusselt number, Nusselt number may decrease slightly if the aperture’s size increases further. The impact of aperture altitude diminishes for large aperture sizes because the geometrical differences decrease. Furthermore, a longer fin causes higher rate of heat transfer to the fluid, although the equivalent finless cavity may have higher heat transfer rate. In general, the volumetric flow rate and the rate of heat loss from the hot surfaces are interrelated and are increasing functions of Rayleigh number. The relationship between Nusselt number and the inclination angle is nonlinear.

Effect of Wall Conduction on Combined Free and Forced Laminar Convection in Horizontal Rectangular Channels

1987 ◽  
Vol 109 (4) ◽  
pp. 936-942 ◽  
Author(s):  
G. J. Hwang ◽  
F. C. Chou
Keyword(s):  
Heat Transfer ◽  
Nusselt Number ◽  
Temperature Distribution ◽  
Finite Difference ◽  
Aspect Ratio ◽  
Finite Difference Method ◽  
Numerical Study ◽  
Fully Developed Flow ◽  
Rectangular Channels ◽  
Laminar Convection

This paper presents a numerical study of the effect of peripheral wall conduction on combined free and forced laminar convection in hydrodynamically and thermally fully developed flow in horizontal rectangular channels with uniform heat input axially, In addition to the Prandtl number, the Grashof number Gr+, and the aspect ratio γ, a parameter Kp indicating the significance of wall conduction plays an important role in heat transfer. A finite-difference method utilizing a power-law scheme is employed to solve the system of governing partial differential equations coupled with the equation for wall conduction. The numerical solution covers the parameters: Pr = 7.2 and 0.73, γ = 0.5, 1, and 2, Kp = 10−4–104, and Gr+ = 0–1.37×105. The flow patterns and isotherms, the wall temperature distribution, the friction factor, and the Nusselt number are presented. The results show a significant effect of the conduction parameter Kp.

Sign in / Sign up

Export Citation Format

Share Document