scholarly journals Optimal Design of Novel Blade Profile for Savonius Wind Turbines

Energies ◽  
2021 ◽  
Vol 14 (12) ◽  
pp. 3484
Author(s):  
Tai-Lin Chang ◽  
Shun-Feng Tsai ◽  
Chun-Lung Chen
Keyword(s):  
Wind Energy ◽  
Drag Force ◽  
Wind Turbines ◽  
Rural Areas ◽  
Large Scale ◽  
Design Method ◽  
Angular Position ◽  
Vertical Axis ◽  
Blade Profile ◽  
Main Concept

Since the affirming of global warming, most wind energy projects have focused on the large-scale Horizontal Axis Wind Turbines (HAWTs). In recent years, the fast-growing wind energy sector and the demand for smarter grids have led to the use of Vertical Axis Wind Turbines (VAWTs) for decentralized energy generation systems, both in urban and remote rural areas. The goals of this study are to improve the Savonius-type VAWT’s efficiency and oscillation. The main concept is to redesign a Novel Blade profile using the Taguchi Robust Design Method and the ANSYS-Fluent simulation package. The convex contour of the blade faces against the wind, creating sufficient lift force and minimizing drag force; the concave contour faces up to the wind, improving or maintaining the drag force. The result is that the Novel Blade improves blade performance by 65% over the Savonius type at the best angular position. In addition, it decreases the oscillation and noise accordingly. This study achieved its two goals.

Overview of Vertical Axis Wind Turbine (VAWT) is one of the Wind Energy Application

2015 ◽  
Vol 793 ◽  
pp. 388-392
Author(s):  
Farhan Ahmed Khammas ◽  
Kadhim Hussein Suffer ◽  
Ryspek Usubamatov ◽  
Mohmmad Taufiq Mustaffa
Keyword(s):  
Wind Energy ◽  
Wind Turbine ◽  
Wind Turbines ◽  
Rural Areas ◽  
High Efficiency ◽  
Wind Farms ◽  
Vertical Axis ◽  
Horizontal Wind ◽  
Traditional Use ◽  
Vertical Axis Wind Turbines

This paper reviews the available types of wind turbine which is one of the wind energy applications. The authors intend to give investors a better idea of which turbine is suitable for a particular setting and to provide a new outlook on vertical axis wind turbines. Wind technology has grown substantially since its original use as a method to grind grains and will only continue to grow. Vertical-axis wind turbines are more compact and suitable for residential and commercial areas while horizontal-axis wind turbines are more suitable for wind farms in rural areas or offshore. However, technological advances in vertical axis wind turbines that are able to generate more energy with a smaller footprint are now challenging the traditional use of horizontal wind turbines in wind farms. Vertical axis wind turbines do not need to be oriented to the wind direction and offer direct rotary output to a ground-level load, making them particularly suitable for water pumping, heating, purification and aeration, as well as stand-alone electricity generation. The use of high efficiency Darrieus turbines for such applications is virtually prohibited by their inherent inability to self-start.

Simulation of Flow Field on a Large Scale Wind Turbine

2008 ◽  
Author(s):  
I. Janajreh ◽  
C. Ghenai
Keyword(s):  
Flow Field ◽  
Wind Energy ◽  
Wind Turbine ◽  
Wind Turbines ◽  
Cross Sections ◽  
Large Scale ◽  
Wind Farms ◽  
Operating Characteristics ◽  
Cross Sectional ◽  
Capital Costs

Large scale wind turbines and wind farms continue to evolve mounting 94.1GW of the electrical grid capacity in 2007 and expected to reach 160.0GW in 2010 according to World Wind Energy Association. They commence to play a vital role in the quest for renewable and sustainable energy. They are impressive structures of human responsiveness to, and awareness of, the depleting fossil fuel resources. Early generation wind turbines (windmills) were used as kinetic energy transformers and today generate 1/5 of the Denmark’s electricity and planned to double the current German grid capacity by reaching 12.5% by year 2010. Wind energy is plentiful (72 TW is estimated to be commercially viable) and clean while their intensive capital costs and maintenance fees still bar their widespread deployment in the developing world. Additionally, there are technological challenges in the rotor operating characteristics, fatigue load, and noise in meeting reliability and safety standards. Newer inventions, e.g., downstream wind turbines and flapping rotor blades, are sought to absorb a larger portion of the cost attributable to unrestrained lower cost yaw mechanisms, reduction in the moving parts, and noise reduction thereby reducing maintenance. In this work, numerical analysis of the downstream wind turbine blade is conducted. In particular, the interaction between the tower and the rotor passage is investigated. Circular cross sectional tower and aerofoil shapes are considered in a staggered configuration and under cross-stream motion. The resulting blade static pressure and aerodynamic forces are investigated at different incident wind angles and wind speeds. Comparison of the flow field results against the conventional upstream wind turbine is also conducted. The wind flow is considered to be transient, incompressible, viscous Navier-Stokes and turbulent. The k-ε model is utilized as the turbulence closure. The passage of the rotor blade is governed by ALE and is represented numerically as a sliding mesh against the upstream fixed tower domain. Both the blade and tower cross sections are padded with a boundary layer mesh to accurately capture the viscous forces while several levels of refinement were implemented throughout the domain to assess and avoid the mesh dependence.

Techno-Economic Assessment of Utilizing Wind Energy for Hydrogen Production Through Electrolysis

2017 ◽  
Author(s):  
Reza Ziazi ◽  
Kasra Mohammadi ◽  
Navid Goudarzi
Keyword(s):  
Hydrogen Production ◽  
Wind Energy ◽  
Wind Turbines ◽  
Alternative Energy ◽  
Large Scale ◽  
Fossil Fuels ◽  
Combustion Engine ◽  
Economic Assessment ◽  
Large Cities ◽  
North East

Hydrogen as a clean alternative energy carrier for the future is required to be produced through environmentally friendly approaches. Use of renewables such as wind energy for hydrogen production is an appealing way to securely sustain the worldwide trade energy systems. In this approach, wind turbines provide the electricity required for the electrolysis process to split the water into hydrogen and oxygen. The generated hydrogen can then be stored and utilized later for electricity generation via either a fuel cell or an internal combustion engine that turn a generator. In this study, techno-economic evaluation of hydrogen production by electrolysis using wind power investigated in a windy location, named Binaloud, located in north-east of Iran. Development of different large scale wind turbines with different rated capacity is evaluated in all selected locations. Moreover, different capacities of electrolytic for large scale hydrogen production is evaluated. Hydrogen production through wind energy can reduce the usage of unsustainable, financially unstable, and polluting fossil fuels that are becoming a major issue in large cities of Iran.

Optimized Small Vertical Axis Wind Turbine (VAWT), Phase I

2021 ◽  
Author(s):  
Moshe Zilberman ◽  
Abdelaziz Abu Sbaih ◽  
Ibrahim Hadad
Keyword(s):  
Wind Energy ◽  
Wind Turbine ◽  
Wind Turbines ◽  
Cost Effective ◽  
Clean Energy ◽  
Vertical Axis ◽  
Low Noise ◽  
Power Coefficient ◽  
Vertical Axis Wind Turbine ◽  
Different Types

Abstract Wind energy has become an important resource for the growing demand for clean energy. In 2020 wind energy provided more than 6% of the global electricity demand. It is expected to reach 7% at the end of 2021. The installation growth rate of small wind turbines, though, is relatively slow. The reasons we are interested in the small vertical axis wind turbines are their low noise, environmentally friendly, low installation cost, and capable of being rooftop-mounted. The main goal of the present study is an optimization process towards achieving the optimal cost-effective vertical wind turbine. Thirty wind turbine models were tested under the same conditions in an Azrieli 30 × 30 × 90 cm low-speed wind tunnel at 107,000 Reynolds number. The different types of models were obtained by parametric variations of five basic models, maintaining the same aspect ratio but varying the number of bucket phases, the orientation angles, and the gaps between the vanes. The best performing turbine model was made of one phase with two vanes of non-symmetric bipolynomial profiles that exhibited 0.2 power coefficient, relative to 0.16 and 0.13 that were obtained for symmetrical polynomial and the original Savonius type turbines, respectively. Free rotation, static forces and moments, and dynamic moments and power were measured for the sake of comparison and explanation for the variations in performances of different types of turbines. CFD calculations were used to understand the forces and moment behaviors of the optimized turbine.

scholarly journals Optimization of Power and Levelized Cost for Shrouded Small Wind Turbine

Inventions ◽  
2020 ◽  
Vol 5 (4) ◽  
pp. 59
Author(s):  
Hasanali Khojasteh ◽  
Younes Noorollahi ◽  
Mojtaba Tahani ◽  
Mehran Masdari
Keyword(s):  
Wind Energy ◽  
Objective Function ◽  
Wind Power ◽  
Wind Turbines ◽  
Power Plants ◽  
Large Scale ◽  
Renewable Energies ◽  
Levelized Cost ◽  
Small Wind Turbines ◽  
Input Parameters

Nowadays, by increasing energy demand and considering the importance of environmental issues in recent decades, the use of renewable energies is expanding. Among renewable energies, wind power and its technology are growing and evolving more rapidly. Resource assessment in Iran has revealed the significant potential of wind energy around the country. To further develop wind energy in the country and create large-scale wind power plants, the consideration of distributed power generation using small wind turbines for applications in agricultural and residential use is needed. Conventional small wind turbines and small wind lens turbines have been developed in recent years. In this research project, a small wind lens turbine is designed. The advantages of this turbine are an increased production capacity and reduced cut-in speed and noise pollution. In this study, a lens (or shroud) is added to a small turbine, and the maximized annual energy production (AEP) and minimization of the levelized cost of energy (LCOE) are modeled. We applied the NSGA-II algorithm for optimization to find the best answer. The input parameters in the objective function of the AEP are cut-in, cut-out, rated speeds, scale factor, and shape factor. Additionally, the input parameters in the objective function of the LCOE are the power production, initial capital cost, annual operating expenses, and balance of energy. The results indicate that installing a wind lens turbine in Kish Island led to an LCOE decrease of 56% on average, and we can see an 83% increase in the AEP. In the Firoozkooh area, an average reduction of 59% in the LCOE and 74% increase in the AEP for a wind lens turbine is observed.

Detailed Analysis of the Wake Structure of a Straight-Blade H-Darrieus Wind Turbine by Means of Wind Tunnel Experiments and Computational Fluid Dynamics Simulations

2017 ◽  
Vol 140 (3) ◽  
Author(s):  
Alessandro Bianchini ◽  
Francesco Balduzzi ◽  
Giovanni Ferrara ◽  
Lorenzo Ferrari ◽  
Giacomo Persico ◽  
...  
Keyword(s):  
Fluid Dynamics ◽  
Experimental Data ◽  
Computational Fluid Dynamics ◽  
Wind Tunnel ◽  
Wind Turbines ◽  
Large Scale ◽  
Vertical Axis ◽  
Performance Estimation ◽  
Small Scale ◽  
Dynamics Simulations

Darrieus vertical axis wind turbines (VAWTs) have been recently identified as the most promising solution for new types of applications, such as small-scale installations in complex terrains or offshore large floating platforms. To improve their efficiencies further and make them competitive with those of conventional horizontal axis wind turbines, a more in depth understanding of the physical phenomena that govern the aerodynamics past a rotating Darrieus turbine is needed. Within this context, computational fluid dynamics (CFD) can play a fundamental role, since it represents the only model able to provide a detailed and comprehensive representation of the flow. Due to the complexity of similar simulations, however, the possibility of having reliable and detailed experimental data to be used as validation test cases is pivotal to tune the numerical tools. In this study, a two-dimensional (2D) unsteady Reynolds-averaged Navier–Stokes (U-RANS) computational model was applied to analyze the wake characteristics on the midplane of a small-size H-shaped Darrieus VAWT. The turbine was tested in a large-scale, open-jet wind tunnel, including both performance and wake measurements. Thanks to the availability of such a unique set of experimental data, systematic comparisons between simulations and experiments were carried out for analyzing the structure of the wake and correlating the main macrostructures of the flow to the local aerodynamic features of the airfoils in cycloidal motion. In general, good agreement on the turbine performance estimation was constantly appreciated.

Circulation Control Applied to Wind Turbines

2009 ◽  
Author(s):  
David McGrain ◽  
Gerald M. Angle ◽  
Jay P. Wilhelm ◽  
Emily D. Pertl ◽  
James E. Smith
Keyword(s):  
Wind Energy ◽  
Wind Turbines ◽  
Power Output ◽  
Alternative Energy ◽  
Vertical Axis ◽  
Limiting Factor ◽  
Circulation Control ◽  
Bird Populations ◽  
Horizontal Axis Wind Turbines ◽  
The Impact

The recent rise in fuel costs and global warming concerns have re-invigorated the search for alternative energy sources. Harnessing energy from the wind is a logical alternative; however the cost and efficiency of current wind turbines is a limiting factor. The use of an augmented Vertical Axis Wind Turbines (VAWTs) may become the superior choice to the more common Horizontal Axis Wind Turbines (HAWTs) that are usually associated with the harvesting of wind energy. HAWTs operate on the same principles as large airplane propellers, while VAWTs operate on lift and/or drag principles like an airplane wing or a sail on a boat. VAWTs are currently being investigated for use with circulation control to increase their potential power output. In this paper, two topics will be presented, a comparison between VAWTs and HAWTs for rotor diameter versus key turbine aspects and the impact of VAWTs on environmental concerns, such as bat and bird populations. The Center for Industrial Research Applications (CIRA) at West Virginia University (WVU) is currently developing a concept utilizing circulation control to increase the lift to drag ratio, maximizing the beneficial forces on the VAWT blade, allowing for improved wind energy production. For the comparison between VAWTs and HAWTs, there are currently 14 companies with a total of 34 wind turbines variations representing VAWTs and 11 companies with a total of 40 wind turbines representing HAWTs. Trend studies of VAWT and HAWT diameters to cut-in-speed, rated velocity, max velocity, power output (<100 kW), and power output (≥100 kW) were created to show the potential of VAWTs. A growing concern with wind energy is the impact on bat and bird populations. It is currently believed that VAWTs reduce the impact of wind energy by altering the interaction with the wind. If these benefits can be proven, then not only are VAWTs potentially more economical, but even more eco-friendly.

scholarly journals A study of rotor and platform design trade-offs for large-scale floating vertical axis wind turbines

2016 ◽  
Vol 753 ◽  
pp. 102003 ◽  
Author(s):  
D. Todd Griffith ◽  
Joshua Paquette ◽  
Matthew Barone ◽  
Andrew J. Goupee ◽  
Matthew J. Fowler ◽  
...  
Keyword(s):  
Wind Turbines ◽  
Large Scale ◽  
Vertical Axis ◽  
Platform Design ◽  
Vertical Axis Wind Turbines ◽  
Trade Offs
Sign in / Sign up

Export Citation Format

Share Document