Monitoring Critical Facilities by Using Advanced RF Devices

2013 ◽  
Author(s):  
Hanchung Tsai ◽  
Yung Y. Liu ◽  
James Shuler
Keyword(s):  
Radio Frequency Identification ◽  
Nuclear Power ◽  
Power Plants ◽  
Fuel Cycle ◽  
National Laboratory ◽  
Argonne National Laboratory ◽  
Hydrogen Gas ◽  
Spent Fuel ◽  
Gas Temperature ◽  
Critical Facilities

The ability to monitor critical environment parameters of nuclear plants at all times, particularly during and after a disruptive accident, is vital for the safety of plant personnel, rescue and recovery crews, and the surrounding communities. Conventional hard-wired assets that depend on supplied power may be decimated as a result of such events, as witnessed in the Japanese Fukushima nuclear power plant in March 2011. Self-powered monitoring devices operating on a wireless platform, on the other hand, may survive such calamity and remain functional. The devices would be prepositioned at strategic locations, particularly where the dangerous build-up of contamination and radiation may preclude subsequent manned entrance and surveillance. Equipped with sensors for β-γ radiation, neutrons, hydrogen gas, temperature, humidity, pressure, and water level, as well as with criticality alarms and imaging equipment for heat, video, and other capabilities, these devices can provide vital surveillance information for assessing the extent of plant damage, mandating responses (e.g., evacuation before impending hydrogen explosion), and enabling overall safe and efficient recovery in a disaster. A radio frequency identification (RFID)-based system — called ARG-US — may be modified and adapted for this task. Developed by Argonne for DOE, ARG-US (meaning “watchful guardian”) has been used successfully to monitor and track sensitive nuclear materials packages at DOE sites. It utilizes sensors in the tags to continuously monitor the state of health of the packaging and promptly disseminates alarms to authorized users when any of the preset sensor thresholds is violated. By adding plant-specific monitoring sensors to the already strong sensor suite and adopting modular hardware, firmware, and software subsystems that are tailored for specific subsystems of a plant, a Remote Area Modular Monitoring (RAMM) system, built on a wireless sensor network (WSN) platform, is being developed by Argonne National Laboratory. ARG-US RAMM, powered by on-board battery, can sustain extended autonomous surveillance operation during and following an incident. The benefits could be invaluable to such critical facilities as nuclear power plants, research and test reactors, fuel cycle manufacturing centers, spent-fuel dry-cask storage facilities, and other nuclear installations.

Transmutation and the Global Nuclear Energy Partnership

2006 ◽  
Vol 985 ◽  
Author(s):  
James Bresee
Keyword(s):  
Nuclear Power ◽  
Power Plants ◽  
Nuclear Energy ◽  
Energy Use ◽  
Fuel Cycle ◽  
Spent Fuel ◽  
Closed Fuel Cycle ◽  
State Of The Union ◽  
Foreign Countries ◽  
The U.S

AbstractIn the January 2006 State of the Union address, President Bush announced a new Advanced Energy Initiative, a significant part of which is the Global Nuclear Energy Initiative. Its details were described on February 6, 2006 by the U.S. Secretary of Energy. In summary, it has three parts: (1) a program to expand nuclear energy use domestically and in foreign countries to support economic growth while reducing the release of greenhouse gases such as carbon dioxide. (2) an expansion of the U.S. nuclear infrastructure that will lead to the recycling of spent fuel and a closed fuel cycle and, through transmutation, a reduction in the quantity and radiotoxicity of nuclear waste and its proliferation concerns, and (3) a partnership with other fuel cycle nations to support nuclear power in additional nations by providing small nuclear power plants and leased fuel with the provision that the resulting spent fuel would be returned by the lessee to the lessor. The final part would have the effect of stabilizing the number of fuel cycle countries with attendant non-proliferation value. Details will be given later in the paper.

Lessons Learned From the Operation of Large-Scale Reprocessing-Recycling Facilities in France: What Is in It for China?

2017 ◽  
Author(s):  
Jean-Pierre Gros
Keyword(s):  
Nuclear Power ◽  
Power Plants ◽  
Large Scale ◽  
Central Government ◽  
Fuel Cycle ◽  
Public Information ◽  
Lessons Learned ◽  
Mitigation Measures ◽  
Spent Fuel ◽  
The Impact

AREVA has been running since decades nuclear reprocessing and recycling installations in France. Several industrial facilities have been built and used to this aim across the time. Following those decades and with the more and more precise monitoring of the impact of those installations, precise data and lessons-learned have been collected that can be used for the stakeholders of potential new facilities. China has expressed strong interest in building such facilities. As a matter of fact, the issue of accumulation of spent fuel is becoming serious in China and jeopardizes the operation of several nuclear power plants, through the running out of space of storage pools. Tomorrow, with the extremely high pace of nuclear development of China, accumulation of spent fuel will be unbearable. Building reprocessing and recycling installations takes time. A decision has to be taken so as to enable the responsible development of nuclear in China. Without a solution for the back end of its nuclear fuel cycle, the development of nuclear energy will face a wall. This is what the Chinese central government, through the action of its industrial CNNC, has well understood. Several years of negotiations have been held with AREVA. Everybody in the sector seems now convinced. However, now that the negotiation is coming to an end, an effort should be done towards all the stakeholders, sharing actual information from France’s reference facilities on: safety, security, mitigation measures for health protection (of the workers, of the public), mitigation measures for the protection of the environment. Most of this information is public, as France has since years promulgated a law on Nuclear transparency. China is also in need for more transparency, yet lacks means to access this public information, often in French language, so let’s open our books!

scholarly journals Nuclear Fuel Transmutation

2021 ◽  
Author(s):  
Akbar Abbasi
Keyword(s):  
Nuclear Fuel ◽  
Nuclear Power ◽  
Power Plants ◽  
Fuel Cycle ◽  
Electric Energy ◽  
Computer Code ◽  
Natural Uranium ◽  
Spent Fuel ◽  
Used Nuclear Fuel ◽  
Front End

Nuclear power plants to generates electric energy used nuclear fuel such as Uranium Oxide (UOX). A typical VVER−1000 reactor uses about 20–25 tons of spent fuel per year. The fuel transmutation of UOX fuel was evaluated by VISTA computer code. In this estimation the front end and back end components of fuel cycle was calculated. The front end of the cycle parameter are FF requirements, enrichment value requirements, depleted uranium amount, conversion requirements and natural uranium requirements. The back-end component is Spent Fuel (SF), Actinide Inventory (AI) and Fission Product (FP) radioisotopes.

scholarly journals Partitioning and transmutation contribution of MYRRHA to an EU strategy for HLW management and main achievements of MYRRHA related FP7 and H2020 projects: MYRTE, MARISA, MAXSIMA, SEARCH, MAX, FREYA, ARCAS

2020 ◽  
Vol 6 ◽  
pp. 33
Author(s):  
Hamid Aït Abderrahim ◽  
Peter Baeten ◽  
Alain Sneyers ◽  
Marc Schyns ◽  
Paul Schuurmans ◽  
...  
Keyword(s):  
Waste Management ◽  
Nuclear Power ◽  
Power Plants ◽  
Fuel Cycle ◽  
Economic Feasibility ◽  
Potential Contribution ◽  
Spent Fuel ◽  
Geological Disposal ◽  
Deep Geological Disposal ◽  
Partitioning And Transmutation

Today, nuclear power produces 11% of the world's electricity. Nuclear power plants produce virtually no greenhouse gases or air pollutants during their operation. Emissions over their entire life cycle are very low. Nuclear energy's potential is essential to achieving a deeply decarbonized energy future in many regions of the world as of today and for decades to come, the main value of nuclear energy lies in its potential contribution to decarbonizing the power sector. Nuclear energy's future role, however, is highly uncertain for several reasons: chiefly, escalating costs and, the persistence of historical challenges such as spent fuel and radioactive waste management. Advanced nuclear fuel recycling technologies can enable full use of natural energy resources while minimizing proliferation concerns as well as the volume and longevity of nuclear waste. Partitioning and Transmutation (P&T) has been pointed out in numerous studies as the strategy that can relax constraints on geological disposal, e.g. by reducing the waste radiotoxicity and the footprint of the underground facility. Therefore, a special effort has been made to investigate the potential role of P&T and the related options for waste management all along the fuel cycle. Transmutation based on critical or sub-critical fast spectrum transmuters should be evaluated in order to assess its technical and economic feasibility and capacity, which could ease deep geological disposal implementation.

Transport of MOX Fuel: A Continuous Challenge

2010 ◽  
Author(s):  
Je´roˆme Galtier
Keyword(s):  
Nuclear Fuel ◽  
Nuclear Power ◽  
Power Plants ◽  
Spent Nuclear Fuel ◽  
Fuel Cycle ◽  
Nuclear Industry ◽  
Spent Fuel ◽  
Radioactive Materials ◽  
Mox Fuel ◽  
Increasing Demand

For 45 years TN International has been involved in the radioactive materials transportation field. Since the beginning the spent nuclear fuel transportation has been its core business. During all these years TN International, now part of AREVA, has been able to anticipate and fulfill the needs for new transport or storage casks designed to fit the nuclear industry evolutions. A whole fleet of casks able to transport all the materials of the nuclear fuel cycle has been developed. In this presentation we will focus on the casks used to transport the fresh and used MOX fuel. To transport the fresh MOX BWR and PWR fuel, TN International has developed two designs of casks: the MX 6 and the MX 8. These casks are and have been used to transport MOX fuel for French, German, Swiss and in a near future Japanese nuclear power plants. A complete set of baskets have been developed to optimize the loading in terms of integrated dose and also of course capacity. MOX used fuel has now its dedicated cask: the TN112 which certificate of approval has been obtained in July 2008. This cask is able to transport 12 MOX spent fuel elements with a short cooling time. The first loading of the cask has been performed in September 2008 in the EDF nuclear power plant of Saint-Laurent-des-Eaux. By its continuous involvement in the nuclear transportation field, TN International has been able to face the many challenges linked to the radioactive materials transportation especially talking of MOX fuel. TN International will also have to face the increasing demand linked to the nuclear renaissance.

scholarly journals Study of Thorium Fuel Cycles for Light Water Reactor VBER-150

2013 ◽  
Vol 2013 ◽  
pp. 1-9
Author(s):  
Daniel Evelio Milian Lorenzo ◽  
Daniel Milian Pérez ◽  
Lorena Pilar Rodríguez García ◽  
Jesús Salomón Llanes ◽  
Carlos Alberto Brayner de Oliveira Lira ◽  
...  
Keyword(s):  
Nuclear Power ◽  
Power Plants ◽  
Fuel Cycle ◽  
Light Water Reactor ◽  
Spent Fuel ◽  
Light Water ◽  
Fuel Cycles ◽  
Standard Design ◽  
Pu Isotopes ◽  
Open Cycle

The main objective of this paper is to examine the use of thorium-based fuel cycle for the transportable reactors or transportable nuclear power plants (TNPP) VBER-150 concept, in particular the neutronic behavior. The thorium-based fuel cycles included Th232+Pu239, Th232+U233, and Th232+U and the standard design fuel UOX. Parameters related to the neutronic behavior such as burnup, nuclear fuel breeding, MA stockpile, and Pu isotopes production (among others) were used to compare the fuel cycles. The Pu transmutation rate and accumulation of Pu with MA in the spent fuel were compared mutually and with an UOX open cycle. The Th232+U233 fuel cycle proved to be the best cycle for minimizing the production of Pu and MA. The neutronic calculations have been performed with the well-known MCNPX computational code, which was verified for this type of fuel performing calculation of the IAEA benchmark announced by IAEA-TECDOC-1349.

Obstacles to Overcome by Small Modular Reactors (SMRs)

2011 ◽  
Author(s):  
Salomon Levy
Keyword(s):  
Nuclear Power ◽  
Power Plants ◽  
Fuel Cycle ◽  
Nuclear Regulatory Commission ◽  
High Level Waste ◽  
Spent Fuel ◽  
Closed Fuel Cycle ◽  
Energy Agency ◽  
Foreign Countries ◽  
The Usa

The development of and support for small modular nuclear power plants (NPPs) is gaining strong momentum in USA. The reasons are that they could require reduced financing and shortened construction schedule. Also, they could address the reduced size need for electricity in some USA locations and, in particular, in developing foreign countries. However, the prevailing enthusiasm needs to be moderated until several potential obstacles are overcome. There are three principal USA obstacles: (1) the successful licensing and certification of the SMRs by the Nuclear Regulatory Commission (NRC) to confirm their safety; (2) SMRs ability to demonstrate that they can compete financially against less costly modular natural gas power plants or the limited purchase of electricity from new large light water reactors (LWRs); and (3) the need to work into the prevailing fuel cycle while not deteriorating spent fuel disposal or increasing proliferation. Clearly, Babcock & Wilcox’s and Nu Scale Power’s SMRs have the earliest chance for success because they would rely upon the present LWR regulatory and fuel cycle experience. Their main obstacle will be demonstrated costs from prototype plants and the willingness to accept fixed turnkey contracts for additional units. The more visionary SMRs such as GE-Hitachi PRISM or the Hyperion Power Generation smaller liquid metal closed fuel cycle reactors will have to overcome more difficult and lengthy regulatory assessments. Also, a complete fuel cycle infrastructure will need to be developed. Penetration of developing foreign countries will be the most difficult because it will demand the development and establishment of a nuclear safety infrastructure in those countries. The International Atomic Energy Agency (IAEA NG-G-31) has detailed the numerous actions and large time schedule and efforts to achieve an adequate safety culture. Also, several export licenses and monetary loans will be required. Furthermore, it will be necessary to overcome the lack of insurance for severe accidents and the anticipated USA refusal to accept domestic disposal of foreign High Level Waste (HLW). This means that government owned suppliers such as Russia have definite advantages over the USA private suppliers because of their willingness to provide loans and handling HLW. This paper first summarizes the power history growth of USA reactors and the recent momentum developed for USA SMRs; it is followed by available brief descriptions of USA LWR SMRs and some of their potential obstacles; more advanced USA SMRs designs and their potential difficulties come next; foreign applications are covered last and they are followed by a Conclusions section.

Basic Research Needs on Physical Chemistry of Radionuclides in the Nuclear Fuel Cycle

2009 ◽  
Vol 1193 ◽  
Author(s):  
T. Advocat ◽  
C. Ferry ◽  
F. Goutelard ◽  
C. Lamouroux ◽  
J.F. Wagner ◽  
...  
Keyword(s):  
Nuclear Power ◽  
Power Plants ◽  
Nuclear Power Plants ◽  
Organic Molecules ◽  
Waste Treatment ◽  
Fuel Cycle ◽  
Basic Research ◽  
Purex Process ◽  
Spent Fuel ◽  
Wide Range

AbstractFrom uranium-ore treatment to spent fuel recycling, waste treatment and conditioning and to final storage of waste packages, radionuclides are involved in numerous chemical and physical reactions. The understanding of their chemical forms (speciation) and behavior as well (retention, complexation,...), as a function of the environment conditions (T, P, solid/liquid/gas interfaces), are key issues for the development of the industrial nuclear activities. Dedicated analytical tools are needed to determine the radionuclide concentrations and speciation in the liquids, solids and gas, over a wide range of concentrations and matrixes. The obtained experimental data on radionuclide speciation are integrated in dedicated data bases, supporting various models used to simulate the system behavior (i.e. RN migration under geological disposal, RN contamination in the primary fluids of nuclear power plants, RN behavior in the PUREX process, etc.). There are several needs in the following domains of the fuel cycle :♦ The development of innovative methods to enhance analytical performances of isotopic composition of elements in irradiated fuels or waste streams arising from processed spent fuels. Isobaric interferences may be suppressed by specific ion-molecules reactions in collision/cell coupled with Mass Spectrometer, instead of preliminary chromatographic separations.♦ The thermo chemistry at high temperature and pressure of the coolant fluids of the nuclear power plants, to model the solid/liquids interactions controlling its contamination by the activated products and hideout processes.♦ The development of scientific and operational models of the radiolysis of organic molecules and materials, under extreme conditions (γ and α radiolysis), to understand the controlling long-term degradation phenomena ( i.e. H2 degassing in the waste packages).♦ The fundamental understanding of sorption processes of redox sensitive elements such as U on specific mineral surfaces, in the presence of organic molecules, to develop dedicated tools for radionuclide monitoring and measurement in the environment.

NUCLEAR WASTE MANAGEMENT IN SPAIN: ANALYSIS OF THE CURRENT SITUATION AND ALTERNATIVE STRATEGIES

10.6036/10156 ◽  
2021 ◽  
Vol 96 (4) ◽  
pp. 355-358
Author(s):  
Pablo Fernández Arias ◽  
DIEGO VERGARA RODRIGUEZ
Keyword(s):  
Nuclear Waste ◽  
Nuclear Power ◽  
Power Plants ◽  
Nuclear Power Plants ◽  
Spent Fuel ◽  
Nuclear Waste Storage ◽  
Alternative Strategies ◽  
Temporary Storage ◽  
Long Term Storage ◽  
High Level

Centralized Temporary Storage Facility (CTS) is an industrial facility designed to store spent fuel (SF) and high level radioactive waste (HLW) generated at Spanish nuclear power plants (NPP) in a single location. At the end of 2011, the Spanish Government approved the installation of the CTS in the municipality of Villar de Cañas in Cuenca. This approval was the outcome of a long process of technical studies and political decisions that were always surrounded by great social rejection. After years of confrontations between the different political levels, with hardly any progress in its construction, this infrastructure of national importance seems to have been definitively postponed. The present research analyzes the management strategy of SF and HLW in Spain, as well as the alternative strategies proposed, taking into account the current schedule foreseen for the closure of the Spanish NPPs. In view of the results obtained, it is difficult to affirm that the CTS will be available in 2028, with the possibility that its implementation may be delayed to 2032, or even that it may never happen, making it necessary to adopt an alternative strategy for the management of GC and ARAR in Spain. Among the different alternatives, the permanence of the current Individualized Temporary Stores (ITS) as a long-term storage strategy stands out, and even the possibility of building several distributed temporary storage facilities (DTS) in which to store the SF and HLW from several Spanish NPP. Keywords: nuclear waste, storage, nuclear power plants.

scholarly journals Temperature conditions in the RBMK spent fuel pool in the event of disturbances in its cooling mode

2021 ◽  
Vol 7 (1) ◽  
pp. 9-13
Author(s):  
David A. Hakobyan ◽  
Victor I. Slobodchuk
Keyword(s):  
Nuclear Power ◽  
Power Plants ◽  
Nuclear Power Plants ◽  
Spent Nuclear Fuel ◽  
Maximum Temperature ◽  
Spent Fuel ◽  
Cooling Mode ◽  
Temperature Conditions ◽  
Fuel Assemblies ◽  
Spent Fuel Pool

The problems of reprocessing and long-term storage of spent nuclear fuel (SNF) at nuclear power plants with RBMK reactors have not been fully resolved so far. For this reason, nuclear power plants are forced to search for new options for the disposal of spent fuel, which can provide at least temporary SNF storage. One of the possible solutions to this problem is to switch to compacted SNF storage in reactor spent fuel pools (SFPs). As the number of spent fuel assemblies (SFAs) in SFPs increases, a greater amount of heat is released. In addition, no less important is the fact that a place for emergency FA discharging should be provided in SFPs. The paper presents the results of a numerical simulation of the temperature conditions in SFPs both for compacted SNF storage and for emergency FA discharging. Several types of disturbances in normal SFP cooling mode are considered, including partial loss of cooling water and exposure of SFAs. The simulation was performed using the ANSYS CFX software tool. Estimates were made of the time for heating water to the boiling point, as well as the time for heating the cladding of the fuel elements to a temperature of 650 °С. The most critical conditions are observed in the emergency FA discharging compartment. The results obtained make it possible to estimate the time that the personnel have to restore normal cooling mode of the spent fuel pool until the maximum temperature for water and spent fuel assemblies is reached.

Sign in / Sign up

Export Citation Format

Share Document