Reinforcement of Emergency Power Supply System for Next Generation SFR

2017 ◽  
Author(s):  
Nobuyuki Ishikawa ◽  
Yoshitaka Chikazawa ◽  
Daisuke Sato ◽  
Risako Ikari
Keyword(s):  
Power Supply ◽  
Power Supply System ◽  
Cooling System ◽  
Load Capacity ◽  
Reactor Core ◽  
Heat Removal ◽  
Supply System ◽  
Next Generation ◽  
Emergency Power ◽  
Core Cooling

In this paper, the emergency power supply system for next generation sodium fast reactor (SFR) is investigated to target the latest system design with such as optimized equipment for measure of loss of heat removal system (LOHRS) events, taking into account for strengthening diversity and multiplicity. In addition to diversity and multiplicity, optimization in terms of amount of equipment is also taken into account. The emergency power supply system is consist of emergency generators for design based accident (DBA) and emergency generators to cope with the design extension condition (DEC) in order to power the additional cooling equipment of fuel handling system and reactor core cooling system as a measure for LOHRS event. Base on the load capacity and system operation, the configuration of emergency power supply system was examined aiming optimization of amount of equipment in accordance with some shared use taking into account the reliability. As a result, the emergency power supply system with 4 fixed-type gas turbine generators, 4 portable-type diesel generators and batteries was established.

Test and Evaluation of a Filtering System for Retention of Fibres in a Coolant Flow After Loss-of-Coolant Accident

2012 ◽  
Author(s):  
T. Gocht ◽  
W. Kästner ◽  
A. Kratzsch ◽  
M. Strasser
Keyword(s):  
Cooling System ◽  
Reactor Core ◽  
Heat Removal ◽  
Test Facility ◽  
Experimental Investigations ◽  
Time Interval ◽  
Insulation Material ◽  
Loss Of Coolant Accident ◽  
Loss Of Coolant ◽  
Core Cooling

In case of an accident the safe heat removal from the reactor core with the installed emergency core cooling system (ECCS) is one of the main features in reactor safety. During a loss-of-coolant accident (LOCA) the release of insulation material fragments in the reactor containment can lead to malfunctions of ECCS. Therefore, the retention of particles by strainers or filtering systems in the ECCS is one of the major tasks. The aim of the presented experimental investigations was the evaluation of a filtering system for the retention of fiber-shaped particles in a fluid flow. The filtering system consists of a filter case with a special lamellar filter unit. The tests were carried out at a test facility with filtering units of different mesh sizes. Insulation material (mineral rock wool) was fragmented to fiber-shaped particles. To simulate the distribution of particle concentration at real plants with large volumes the material was divided into single portions and introduced into the loop with a defined time interval. Material was transported to the filter by the fluid and agglomerated there. The assessment of functionality of the filtering system was made by differential pressure between inlet and outlet of the filtering system and by mass of penetrated particles. It can be concluded that for the tested filtering system no penetration of insulation particles occurred.

scholarly journals The Problem of Train Scheduling in the Context of the Load on the Power Supply Infrastructure. A Case Study

Energies ◽  
2021 ◽  
Vol 14 (16) ◽  
pp. 4781
Author(s):  
Szymon Haładyn
Keyword(s):  
Power Supply ◽  
Power Supply System ◽  
Load Capacity ◽  
Supply System ◽  
Rolling Stock ◽  
Supply Network ◽  
Railway Line ◽  
System Use ◽  
Railway System

This article deals with the new challenges facing modernising railways in Poland. We look at the problem of the efficiency of the power supply system (3 kV DC) used in the context of the increasing use of electric vehicles, which have a higher demand for electricity than the old type. We present and characterise the power supply system in use, pointing out its weaknesses. We consider a case study. The load of the power supply network generated by the rolling stock used in Poland was examined using a microsimulation. A real train timetable was taken into account on a fragment of one of the most important railway line sections in one of the urban agglomerations. Then the results were compared with the results of a microsimulation in which old units were replaced by new trains. These tests were carried out in several variants. We found critical points in the scheduling of railway system use. Our results indicate that it is becoming increasingly necessary to take into account the permissible load capacity of the supply network in certain traffic situations in the process of timetable construction.

scholarly journals Analysis of fuel properties applied at a structure of aircraft

2019 ◽  
Vol 20 (1-2) ◽  
pp. 251-254
Author(s):  
Edyta Janeba-Bartoszewicz
Keyword(s):  
Power Supply ◽  
Alternative Fuels ◽  
Power Supply System ◽  
Supply System ◽  
Air Transport ◽  
Liquid Fuels ◽  
Current Status ◽  
Synthetic Compounds ◽  
Military Aviation ◽  
Emergency Power

The article presents the current status of liquid fuels used in aviation. The physicochemical properties of these liquids are discussed against the background of the type of aviation and mission. Aviation fuels are mixtures of hydrocarbons most often obtained from conservative or processing crude oil, supplemented with additives improving their exploitation properties. Currently, aviation fuels occur in two basic types: fuels for turbojet engines and fuels for piston engines. The basic fuel for commercial air transport and military aviation is fuel for turbo-propeller engines. Synthetic compounds and various types of alternative fuels are used more rarely as aviation fuels. A specific role is played by hydrazine used in the emergency power supply system of aircraft, for example, in multi-purpose fighter planes F-16.

The Development of the Evolutionary BWR

2006 ◽  
Author(s):  
A. Murase ◽  
M. Nakamaru ◽  
M. Kuroki ◽  
Y. Kojima ◽  
S. Yokoyama
Keyword(s):  
Cooling System ◽  
Reactor Core ◽  
Heat Removal ◽  
Safety Performance ◽  
Severe Accident ◽  
Main Role ◽  
Isolation System ◽  
Near Term ◽  
Core Cooling ◽  
Control Rods

Considering the delay of the fast breeding reactor (FBR) development, it is expected that the light water reactor will still play the main role of the electric power generation in the 2030’s. Accordingly, Toshiba has been developing a new conceptual ABWR as the near-term BWR. We tentatively call it AB1600. The AB1600 has introduced the hybrid active/passive safety system in order to improve countermeasure against severe accident (SA). At the same time, we have made the simplification of the overall plant systems in order to improve economy. The simplification of the AB1600 is based on the proven technologies. To retain the safety performance superior or equivalent to the current ABWR and to strengthen the countermeasure against SA, the AB1600 has introduced the passive systems such as the passive containment cooling system (PCCS), the gravity driven core cooling system (GDCS) and the isolation condenser (IC). While we retain the safety performance superior or equivalent to the current ABWR, we have made the simplification of the safety systems. We could eliminate the high pressure core flooder system (HPCF) and the reactor core isolation system (RCIC) by extending the height of reactor pressure vessel (RPV) two meters. To achieve simplification of reactor systems, we have reduced the number of fuel bundles and the number of control rods by adopting large bundle that has a bundle pitch 1.2 times wider than that of the current ABWR. In the 1600MWe class, the number of fuel bundles could be reduced to 600 from 872 of the current ABWR, and the number of control rods could be reduced to 137 from 205 of the current ABWR. Because the reactor internal pump (RIP) of the current ABWR has sufficient performance capacity and the improvement of fuel characteristics from the current fuel enables the operation at lower core flow, the number of RIPs could be decreased from ten to eight. Furthermore, we have reduced the number of divisions of emergency core cooling system (ECCS)/heat removal system to two from three of the current ABWR. This configuration change contributes to reduce the amount of resources of not only reactor systems but also auxiliary systems. In the previous paper, the AB1600 had four low pressure flooder systems (LPFLs). We have studied about the possibility of reduction of LPFLs to two from four by providing the LPFL with alternative injection lines. This change is expected to contribute to reduce the total number of ECCS pumps and the capacity of emergency AC power.

Sign in / Sign up

Export Citation Format

Share Document