Measurement of the Optical Properties of Muscle Tissue In Vivo

2000 ◽  
Author(s):  
P. L. Kopsombut ◽  
D. Willis ◽  
A. E. Schen ◽  
L. X. Xu ◽  
X. Xu
Keyword(s):  
Optical Properties ◽  
Transport Theory ◽  
Rapid Development ◽  
Ccd Camera ◽  
High Sensitivity ◽  
Biological Tissues ◽  
In Vivo Measurement ◽  
Living Tissues

Abstract Along with rapid development of diagnostic and therapeutic applications of lasers in medicine, optical properties of various biological tissues have been extensively studied [1]. Most of the studies were performed in vitro owing to the complexity involved in in vivo measurement. To date, it is well understood that living tissue is an absorbing and scattering heterogeneous medium because of its complex structures including blood network. The transport theory cannot be readily used due to the heterogeneity and the absence of the optical properties of living tissues [2]. In this research, we have developed a procedure for measuring the total attenuation coefficient (μ1) of the exteriorized rat 2-D spinotrapezius muscle in the wavelength ranged from 480–560 nm using the collimated light from a Nitrogen-pumped dye laser and a high-sensitivity CCD camera.

scholarly journals Machine learning estimation of tissue optical properties

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Brett H. Hokr ◽  
Joel N. Bixler
Keyword(s):  
Neural Network ◽  
Optical Properties ◽  
Biological Tissues ◽  
Homogeneous Layer ◽  
In Vivo Measurement ◽  
Tissue Optical Properties ◽  
The Neural Network ◽  
Spatio Temporal ◽  
Fully Connected

AbstractDynamic, in vivo measurement of the optical properties of biological tissues is still an elusive and critically important problem. Here we develop a technique for inverting a Monte Carlo simulation to extract tissue optical properties from the statistical moments of the spatio-temporal response of the tissue by training a 5-layer fully connected neural network. We demonstrate the accuracy of the method across a very wide parameter space on a single homogeneous layer tissue model and demonstrate that the method is insensitive to parameter selection of the neural network model itself. Finally, we propose an experimental setup capable of measuring the required information in real time in an in vivo environment and demonstrate proof-of-concept level experimental results.

scholarly journals Мониторинг процесса иммерсионного оптического просветления коллагеновых волокон с помощью оптической когерентной томографии

2019 ◽  
Vol 127 (8) ◽  
pp. 337
Author(s):  
М.Е. Швачкина ◽  
Д.Д. Яковлев ◽  
Е.Н. Лазарева ◽  
А.Б. Правдин ◽  
Д.A. Яковлев
Keyword(s):  
Optical Coherence Tomography ◽  
Optical Properties ◽  
Biological Tissues ◽  
Dehydration Process ◽  
Immersion Liquid ◽  
Reliable Technique ◽  
Optical Clearing ◽  
Osmotic Effect

AbstractFuture development of the method of immersion optical clearing of biological tissues—this method is widely used in the study of the morphology and pathologies of tissues in vitro and considered promising for in vivo applications in biophysical research and medicine—requires knowledge of the details of interaction of immersion liquids with the tissue, in particular, the characteristics both of the tissue dehydration process, which is caused by the osmotic effect of the immersion liquid, and the process of diffusion of the immersion agent (IA) into the tissue. The optical properties of skin dermis, eye sclera, tendon, and many other tissues are determined by the properties of collagen bundles, abundant in these tissues. In the present work, a convenient and reliable technique for monitoring the optical properties and geometry of collagen bundles in the course of their immersion clearing in vitro, based on optical coherence tomography (OCT), is proposed. The main advantage of this technique is that it allows one to monitor changes in the geometric and optical properties of the tissue simultaneously, without interrupting the natural course of the immersion clearing process, and to obtain reliable estimates of the characteristic times and rates of both the process of tissue dehydration and process of diffusion of the IA into the tissue.

scholarly journals Progress on Self-Powered Wearable and Implantable Systems Driven by Nanogenerators

Micromachines ◽  
2021 ◽  
Vol 12 (6) ◽  
pp. 666
Author(s):  
Lanxin Yang ◽  
Zhihao Ma ◽  
Yun Tian ◽  
Bo Meng ◽  
Zhengchun Peng
Keyword(s):  
Mechanical Energy ◽  
Rapid Development ◽  
Electronic Devices ◽  
High Sensitivity ◽  
Self Powered ◽  
Triboelectric Nanogenerators ◽  
The Internet Of Things ◽  
Piezoelectric Nanogenerators

With the rapid development of the internet of things (IoT), sustainable self-powered wireless sensory systems and diverse wearable and implantable electronic devices have surged recently. Under such an opportunity, nanogenerators, which can convert continuous mechanical energy into usable electricity, have been regarded as one of the critical technologies for self-powered systems, based on the high sensitivity, flexibility, and biocompatibility of piezoelectric nanogenerators (PENGs) and triboelectric nanogenerators (TENGs). In this review, we have thoroughly analyzed the materials and structures of wearable and implantable PENGs and TENGs, aiming to make clear how to tailor a self-power system into specific applications. The advantages in TENG and PENG are taken to effectuate wearable and implantable human-oriented applications, such as self-charging power packages, physiological and kinematic monitoring, in vivo and in vitro healing, and electrical stimulation. This review comprehensively elucidates the recent advances and future outlook regarding the human body’s self-powered systems.

A Comparison of Magnetometry and Relaxometry Measures of Magnetic Nanoparticles Deposited in Biological Samples

2015 ◽  
Vol 31 ◽  
pp. 129-137 ◽  
Author(s):  
Ana Lorena Urbano-Bojorge ◽  
Nazario Félix-González ◽  
Tamara Fernández ◽  
Francisco del Pozo-Guerrero ◽  
Milagros Ramos ◽  
...  
Keyword(s):  
Magnetic Nanoparticles ◽  
Magnetic Nanostructures ◽  
High Sensitivity ◽  
Biological Tissues ◽  
The Body ◽  
In Vivo Studies ◽  
Gradient Field ◽  
Measurement Protocol

The Alternating Gradient Field Magnetometer (AGFM) is an instrument whose high sensitivity (10-8 emu) allows the detection of small amounts of magnetic nanoparticles (MNPs) with high accuracy. Over the last few years, different magnetic techniques have been used for in vitro measurements of magnetic nanostructures inside biological tissues. However, in vivo studies about their distribution within the body are very scarce because their dispersion, after being delivered, reduces their magnetic signal and hinders detection. In this paper we compare the longitudinal relaxation time (T1) and magnetization measurements in mice's biological tissues for the tracking of MNPs after of an injection of iron oxide nanoparticles. Furthermore, we have correlated the AGFM data with Fast Field Cycling NMR Relaxometry (FFCNMR Relaxometry) measurements with histological analysis. The results have demonstrated that these techniques are useful for detecting minute amounts of MNPs in excised organs after in-vivo comparable to other more conventional techniques for the measurement of MNPs biodistribution and clearance. Details about the preparation of the in vivo samples, measurement protocol and statistical data processing are given.

Multi-mode light microscopy of microtubule assembly dynamics and chromosome movement in vivo and In vitro

1996 ◽  
Vol 54 ◽  
pp. 730-731
Author(s):  
E. D. Salmon ◽  
J. C. Waters ◽  
C. Waterman-Storer
Keyword(s):  
Imaging System ◽  
Ccd Camera ◽  
Transmitted Light ◽  
Microtubule Assembly ◽  
Live Cells ◽  
Optical Efficiency ◽  
Multiple Band ◽  
Multi Mode

We have developed a multi-mode digital imaging system which acquires images with a cooled CCD camera (Figure 1). A multiple band pass dichromatic mirror and robotically controlled filter wheels provide wavelength selection for epi-fluorescence. Shutters select illumination either by epi-fluorescence or by transmitted light for phase contrast or DIC. Many of our experiments involve investigations of spindle assembly dynamics and chromosome movements in live cells or unfixed reconstituted preparations in vitro in which photodamage and phototoxicity are major concerns. As a consequence, a major factor in the design was optical efficiency: achieving the highest image quality with the least number of illumination photons. This principle applies to both epi-fluorescence and transmitted light imaging modes. In living cells and extracts, microtubules are visualized using X-rhodamine labeled tubulin. Photoactivation of C2CF-fluorescein labeled tubulin is used to locally mark microtubules in studies of microtubule dynamics and translocation. Chromosomes are labeled with DAPI or Hoechst DNA intercalating dyes.

scholarly journals Survival and Proliferation under Severely Hypoxic Microenvironments Using Cell-Laden Oxygenating Hydrogels

2021 ◽  
Vol 12 (2) ◽  
pp. 30
Author(s):  
Shabir Hassan ◽  
Berivan Cecen ◽  
Ramon Peña-Garcia ◽  
Fernanda Roberta Marciano ◽  
Amir K. Miri ◽  
...  
Keyword(s):  
Prolonged Release ◽  
Therapeutic Approaches ◽  
Encapsulated Cells ◽  
Hypoxic Conditions ◽  
Skeletal Myoblasts ◽  
Artificial Tissue ◽  
Delivery Platform ◽  
Living Tissues

Different strategies have been employed to provide adequate nutrients for engineered living tissues. These have mainly revolved around providing oxygen to alleviate the effects of chronic hypoxia or anoxia that result in necrosis or weak neovascularization, leading to failure of artificial tissue implants and hence poor clinical outcome. While different biomaterials have been used as oxygen generators for in vitro as well as in vivo applications, certain problems have hampered their wide application. Among these are the generation and the rate at which oxygen is produced together with the production of the reaction intermediates in the form of reactive oxygen species (ROS). Both these factors can be detrimental for cell survival and can severely affect the outcome of such studies. Here we present calcium peroxide (CPO) encapsulated in polycaprolactone as oxygen releasing microparticles (OMPs). While CPO releases oxygen upon hydrolysis, PCL encapsulation ensures that hydrolysis takes place slowly, thereby sustaining prolonged release of oxygen without the stress the bulk release can endow on the encapsulated cells. We used gelatin methacryloyl (GelMA) hydrogels containing these OMPs to stimulate survival and proliferation of encapsulated skeletal myoblasts and optimized the OMP concentration for sustained oxygen delivery over more than a week. The oxygen releasing and delivery platform described in this study opens up opportunities for cell-based therapeutic approaches to treat diseases resulting from ischemic conditions and enhance survival of implants under severe hypoxic conditions for successful clinical translation.

scholarly journals Characterization of the SARS-CoV-2 coronavirus X4-like accessory protein

2021 ◽  
Vol 22 (1) ◽  
Author(s):  
Olanrewaju Ayodeji Durojaye ◽  
Nkwachukwu Oziamara Okoro ◽  
Arome Solomon Odiba
Keyword(s):  
Rapid Development ◽  
Protein A ◽  
The Novel ◽  
Quality Model ◽  
A Value ◽  
Model Protein ◽  
Novel Coronavirus ◽  
Global Threat

Abstract Background The novel coronavirus SARS-CoV-2 is currently a global threat to health and economies. Therapeutics and vaccines are in rapid development; however, none of these therapeutics are considered as absolute cure, and the potential to mutate makes it necessary to find therapeutics that target a highly conserved regions of the viral structure. Results In this study, we characterized an essential but poorly understood coronavirus accessory X4 protein, a core and stable component of the SARS-CoV family. Sequence analysis shows a conserved ~ 90% identity between the SARS-CoV-2 and previously characterized X4 protein in the database. QMEAN Z score of the model protein shows a value of around 0.5, within the acceptable range 0–1. A MolProbity score of 2.96 was obtained for the model protein and indicates a good quality model. The model has Ramachandran values of φ = − 57o and ψ = − 47o for α-helices and values of φ = − 130o and ψ = + 140o for twisted sheets. Conclusions The protein data obtained from this study provides robust information for further in vitro and in vivo experiment, targeted at devising therapeutics against the virus. Phylogenetic analysis further supports previous evidence that the SARS-CoV-2 is positioned with the SL-CoVZC45, BtRs-BetaCoV/YN2018B and the RS4231 Bat SARS-like corona viruses.

scholarly journals Advanced Functional Materials Based on Nanocellulose for Pharmaceutical/Medical Applications

Pharmaceutics ◽  
2021 ◽  
Vol 13 (8) ◽  
pp. 1125
Author(s):  
Raluca Nicu ◽  
Florin Ciolacu ◽  
Diana E. Ciolacu
Keyword(s):  
Rapid Development ◽  
Cellulose Nanofibrils ◽  
Functional Materials ◽  
Medical Applications ◽  
Bacterial Nanocellulose ◽  
Green Materials ◽  
Wide Range ◽  
In Vivo Cytotoxicity

Nanocelluloses (NCs), with their remarkable characteristics, have proven to be one of the most promising “green” materials of our times and have received special attention from researchers in nanomaterials. A diversity of new functional materials with a wide range of biomedical applications has been designed based on the most desirable properties of NCs, such as biocompatibility, biodegradability, and their special physicochemical properties. In this context and under the pressure of rapid development of this field, it is imperative to synthesize the successes and the new requirements in a comprehensive review. The first part of this work provides a brief review of the characteristics of the NCs (cellulose nanocrystals—CNC, cellulose nanofibrils—CNF, and bacterial nanocellulose—BNC), as well as of the main functional materials based on NCs (hydrogels, nanogels, and nanocomposites). The second part presents an extensive review of research over the past five years on promising pharmaceutical and medical applications of nanocellulose-based materials, which have been discussed in three important areas: drug-delivery systems, materials for wound-healing applications, as well as tissue engineering. Finally, an in-depth assessment of the in vitro and in vivo cytotoxicity of NCs-based materials, as well as the challenges related to their biodegradability, is performed.

scholarly journals Biological nanoscale fluorescent probes: From structure and performance to bioimaging

2020 ◽  
Vol 39 (1) ◽  
pp. 209-221
Author(s):  
Jiafeng Wan ◽  
Xiaoyuan Zhang ◽  
Kai Zhang ◽  
Zhiqiang Su
Keyword(s):  
Fluorescent Probes ◽  
Organic Dyes ◽  
Resonance Energy Transfer ◽  
Resonance Energy ◽  
High Sensitivity ◽  
Biological Imaging ◽  
Fluorescent Materials ◽  
And Performance

Abstract In recent years, nanomaterials have attracted lots of attention from researchers due to their unique properties. Nanometer fluorescent materials, such as organic dyes, semiconductor quantum dots (QDs), metal nano-clusters (MNCs), carbon dots (CDs), etc., are widely used in biological imaging due to their high sensitivity, short response time, and excellent accuracy. Nanometer fluorescent probes can not only perform in vitro imaging of organisms but also achieve in vivo imaging. This provides medical staff with great convenience in cancer treatment. Combined with contemporary medical methods, faster and more effective treatment of cancer is achievable. This article explains the response mechanism of three-nanometer fluorescent probes: the principle of induced electron transfer (PET), the principle of fluorescence resonance energy transfer (FRET), and the principle of intramolecular charge transfer (ICT), showing the semiconductor QDs, precious MNCs, and CDs. The excellent performance of the three kinds of nano fluorescent materials in biological imaging is highlighted, and the application of these three kinds of nano fluorescent probes in targeted biological imaging is also introduced. Nanometer fluorescent materials will show their significance in the field of biomedicine.

Sign in / Sign up

Export Citation Format

Share Document