Simulation Study of Adaptive Magneto-Rheological Seat Suspension

2004 ◽  
Author(s):  
Xubin Song ◽  
Mehdi Ahmadian ◽  
Steve Southward ◽  
Lane Miller
Keyword(s):  
Simulation Study ◽  
Adaptive Algorithm ◽  
Simulation Analysis ◽  
Mr Damper ◽  
Adaptive Controller ◽  
Step Size ◽  
Seat Suspension ◽  
Model Based ◽  
Magneto Rheological ◽  
Adaptive Suspension

This paper describes the details of the simulation analysis of a nonlinear model-based adaptive suspension control system[1, 2]. The numerical aspect of the simulation study of a seat suspension with application of magneto-rheological dampers will be presented. Magneto-rheological (MR) dampers have strong nonlinearities such as bi-linearity, hysteresis, and saturation related to magnetism, which can be represented by appropriate mathematic functions, respectively. Thus the model-based adaptive algorithm becomes complicated because of involvement of MR damper models. One objective of this study is to investigate the effect of MR damper model simplifications on the adaptive suspension performance. Furthermore, simulation is also applied to do parametric study of adaptive algorithm parameters such as filtering and step size. The simulation results compare the proposed adaptive controller with passive dampers to validate not only its effectiveness but also obtain some guidance information for its experimental implementation.

Superharmonics-Free Adaptive Semiactive Magneto-Rheological Suspension

2005 ◽  
Author(s):  
Xubin Song ◽  
Mehdi Ahmadian ◽  
Steve Southfield ◽  
Lane Miller
Keyword(s):  
Adaptive Control ◽  
Adaptive Algorithm ◽  
Vibration Suppression ◽  
Mr Damper ◽  
Adaptive Controller ◽  
System Stability ◽  
Structural Vibration ◽  
Vehicle Suspensions ◽  
Seat Suspension ◽  
Magneto Rheological

This paper focuses on laboratory implementation of a semiactive seat suspension with application of magneto-rheological (MR) dampers. We firstly introduce the nonlinear dynamics phenomena induced with the skyhook control that is now widely applied from structural vibration suppression to commercialized vehicle suspensions. However, superharmonic dynamics has not been clearly addressed in such vibration control systems. This paper tries to explain how superharmonics are created with skyhook controls through testing data analysis. Furthermore, in order to avoid this dynamics issue, this study implements a nonlinear model-based adaptive control into this MR damper based seat suspension. Based on a nonparametric MR damper model, the adaptive algorithm is expanded mathematically, and the system stability is discussed. Then in the following sections, this paper describes implementation procedures such as modeling simplification and validation, and testing results. Through the laboratory testing, the adaptive suspension is compared to two passive suspensions: hard-damping (stiff) suspension with max current of 1A to the MR damper, and low-damping (soft) suspension with minimum of 0A, while broadband random excitations are applied with respect to the seat suspension resonant frequency in order to test the adaptability of the adaptive control. Furthermore, mass and spring rate are assumed known and unknown for this adaptive controller to investigate the capability of this algorithm with the simplified model, respectively. Finally the comparison of testing results is presented to show the effectiveness and feasibility of the proposed adaptive algorithm to eliminate the superharmonics from the MR seat suspension.

Analysis and Strategy for Superharmonics With Semiactive Suspension Control Systems

2007 ◽  
Vol 129 (6) ◽  
pp. 795-803 ◽  
Author(s):  
Xubin Song ◽  
Mehdi Ahmadian ◽  
Steve Southward
Keyword(s):  
Adaptive Control ◽  
Control Systems ◽  
Adaptive Algorithm ◽  
Vibration Suppression ◽  
Negative Impact ◽  
Mr Damper ◽  
System Stability ◽  
Structural Vibration ◽  
Vehicle Suspensions ◽  
Seat Suspension

This paper focuses on an experimental implementation of a semiactive seat suspension using magnetorheological (MR) dampers. We first introduce the nonlinear dynamics phenomena induced by skyhook control. Skyhook control has been widely applied to applications ranging from structural vibration suppression to commercialized vehicle suspensions. Unfortunately, skyhook control generates superharmonic dynamics; yet, this issue has not been clearly addressed in such vibration control systems. This paper will attempt to explain how superharmonics are created with skyhook controls through analysis of test data. Furthermore, a nonlinear model-based adaptive control algorithm is developed and evaluated for reducing the negative impact of the superharmonics. Based on an empirical MR damper model, the adaptive algorithm is expanded mathematically, and the system stability is discussed. Then in the following sections, this paper describes implementation procedures such as modeling simplification and validation, and testing results. Through the laboratory testing, the adaptive suspension is compared to two passive suspensions: hard-damping (stiff) suspension with a maximum current of 1A to the MR damper and low-damping (soft) suspension with a low current of 0A, while broadband random excitations are applied with respect to the seat suspension resonant frequency in order to test the adaptability of the adaptive control. In two separate studies, both mass and spring rate are assumed known and unknown in order to investigate the capability of the adaptive algorithm with the simplified model. Finally, the comparison of test results is presented to show the effectiveness and feasibility of the proposed adaptive algorithm to eliminate the superharmonics from the MR seat suspension response.

scholarly journals Semi-Active Scissors-Seat Suspension With Magneto-Rheological Damper

2020 ◽  
Vol 7 ◽  
Author(s):  
Hongtao Zhu ◽  
Xiaoting Rui ◽  
Fufeng Yang ◽  
Wei Zhu ◽  
Junjie Gu
Keyword(s):  
Root Mean Square ◽  
Mr Damper ◽  
Vibration Velocity ◽  
Viscous Damping ◽  
Mean Square ◽  
Digital Integrator ◽  
Seat Suspension ◽  
Tracking Model ◽  
Magneto Rheological ◽  
Mr Fluid Damper

A cab seat suspension with a magneto-rheological (MR) fluid damper is introduced in this paper. A unified-format model for the MR damper is proposed to describe the dynamic characteristics of the MR damper. Also, a simple force-inverse model and a viscous damping tracking model are used for the coil current solution. A digital integrator and an extended Kalman filter are respectively adopted to obtain the vibration velocity of the chair frame and the relative motion velocity of the MR damper piston. A new skyhook control base with viscous damping tracking is applied to the semi-active seat suspension. In the simulation, compared with passive seat suspension under different displacement excitation (2, 4, 6, 8 Hz-sine, and random), the acceleration root mean square of the seat suspension with the MR damper is reduced by 52.2%, 32.2%, 41.3%, 50.8%, and 34.6%, respectively. In the experiment, the acceleration root mean square is reduced by 11.2%, 41.2%, 45.8%, and 31.5%, respectively under different displacement excitation (2, 4, 6, and 8 Hz-sine).

Model-based control of the substrate concentration in an aeration basin using the wastewater level

1998 ◽  
Vol 37 (12) ◽  
pp. 335-342 ◽  
Author(s):  
Jacek Czeczot
Keyword(s):  
Substrate Concentration ◽  
Consumption Rate ◽  
Least Square Method ◽  
Estimation Procedure ◽  
Adaptive Controller ◽  
Open Loop ◽  
Least Square ◽  
Substrate Consumption ◽  
Model Based ◽  
Effluent Flow Rate

This paper deals with the minimal-cost control of the modified activated sludge process with varying level of wastewater in the aerator tank. The model-based adaptive controller of the effluent substrate concentration, basing on the substrate consumption rate and manipulating the effluent flow rate outcoming from the aerator tank, is proposed and its performance is compared with conventional PI controller and open loop behavior. Since the substrate consumption rate is not measurable on-line, the estimation procedure on the basis of the least-square method is suggested. Finally, it is proved that cooperation of the DO concentration controller with the adaptive controller of the effluent substrate concentration allows the process to be operated at minimum costs (low consumption of aeration energy).

scholarly journals On the Accuracy of the Sine Power Lomax Model for Data Fitting

Modelling ◽  
2021 ◽  
Vol 2 (1) ◽  
pp. 78-104
Author(s):  
Vasili B. V. Nagarjuna ◽  
R. Vishnu Vardhan ◽  
Christophe Chesneau
Keyword(s):  
Statistical Model ◽  
Simulation Study ◽  
Statistical Models ◽  
Goodness Of Fit ◽  
Data Fitting ◽  
Applied Science ◽  
Survival Distribution ◽  
Lomax Distribution ◽  
Model Based

Every day, new data must be analysed as well as possible in all areas of applied science, which requires the development of attractive statistical models, that is to say adapted to the context, easy to use and efficient. In this article, we innovate in this direction by proposing a new statistical model based on the functionalities of the sinusoidal transformation and power Lomax distribution. We thus introduce a new three-parameter survival distribution called sine power Lomax distribution. In a first approach, we present it theoretically and provide some of its significant properties. Then the practicality, utility and flexibility of the sine power Lomax model are demonstrated through a comprehensive simulation study, and the analysis of nine real datasets mainly from medicine and engineering. Based on relevant goodness of fit criteria, it is shown that the sine power Lomax model has a better fit to some of the existing Lomax-like distributions.

Damping characteristics of a magneto-rheological damper with dual independent controllable ducts

2021 ◽  
pp. 1045389X2110188
Author(s):  
Jianqiang Yu ◽  
Xiaomin Dong ◽  
Tao Wang ◽  
Zhengmu Zhou ◽  
Yaqin Zhou
Keyword(s):  
Dynamic Range ◽  
Fluid Flows ◽  
Mr Damper ◽  
Viscous Damping ◽  
The Novel ◽  
The Finite Element Method ◽  
Damping Force ◽  
Damping Characteristics ◽  
Magneto Rheological ◽  
The Mathematical Model

This paper presents the damping characteristics of a linear magneto-rheological (MR) damper with dual controllable ducts based on numerical and experimental analysis. The novel MR damper consisting of a dual-rod cylinder system and a MR valve is used to reduce the influences of viscous damping force and improve dynamic range. Driven by the dual-rod cylinder system, MR fluid flows in the MR valve. The pressure drop of the MR valve with dual independent controllable ducts can be controlled by tuning the current of two independent coils. Based on the mathematical model and the finite element method, the damping characteristics of the MR damper is simulated. A prototype is designed and tested on MTS machine to evaluate its damping characteristics. The results show that the working states and damping force of the MR damper can be controlled by the two independent coils.

Characteristic model-based adaptive control for cryogenic wind tunnels

2020 ◽  
pp. 014233122096065
Author(s):  
Chenhui Yu ◽  
Fei Liao ◽  
Haibo Ji ◽  
Wenhua Wu
Keyword(s):  
Reynolds Number ◽  
Wind Tunnel ◽  
Flow Field ◽  
Control Problem ◽  
Mimo System ◽  
Adaptive Controller ◽  
Characteristic Model ◽  
Model Based ◽  
Field Control ◽  
Cryogenic Wind Tunnel

With the increasing requirement of Reynolds number simulation in wind tunnel tests, the cryogenic wind tunnel is considered as a feasible method to realize high Reynolds number. Characteristic model-based adaptive controller design method is introduced to flow field control problem of the cryogenic wind tunnel. A class of nonlinear multi-input multi-output (MIMO) system is given for theoretical research that is related to flow field control of the cryogenic wind tunnel. The characteristic model in the form of second-order time-varying difference equations is provided to represent the system. A characteristic model-based adaptive controller is also designed correspondingly. The stability analysis of the closed loop system composed of the characteristic model or the exact discrete-time model and the proposed controller is investigated respectively. Numerical simulation is presented to illustrate the effectiveness of this control method. The modeling and control problem based on characteristic model method for a class of MIMO system are studied and first applied to the cryogenic wind tunnel control field.

A Reliability Assessment Model for MR Damper Components within a Smart Structural Control Scheme

2008 ◽  
Vol 56 ◽  
pp. 218-224
Author(s):  
Maguid H.M. Hassan
Keyword(s):  
Structural Control ◽  
Inverse Dynamics ◽  
Mr Damper ◽  
Assessment Model ◽  
Resistance Force ◽  
Mr Dampers ◽  
Control Scheme ◽  
Smart Control ◽  
Control Devices ◽  
Magneto Rheological

Smart control devices have gained a wide interest in the seismic research community in recent years. Such interest is triggered by the fact that these devices are capable of adjusting their characteristics and/or properties in order to counter act adverse effects. Magneto-Rheological (MR) dampers have emerged as one of a range of promising smart control devices, being considered for seismic applications. However, the reliability of such devices, as a component within a smart structural control scheme, still pause a viable question. In this paper, the reliability of MR dampers, employed as devices within a smart structural control system, is investigated. An integrated smart control setup is proposed for that purpose. The system comprises a smart controller, which employs a single MR damper to improve the seismic response of a single-degree-of-freedom system. The smart controller, in addition to, a model of the MR damper, is utilized in estimating the damper resistance force available to the system. On the other hand, an inverse dynamics model is utilized in evaluating the required damper resistance force necessary to maintain a predefined displacement pattern. The required and supplied forces are, then, utilized in evaluating the reliability of the MR damper. This is the first in a series of studies that aim to explore the effect of other smart control techniques such as, neural networks and neuro fuzzy controllers, on the reliability of MR dampers.

Sign in / Sign up

Export Citation Format

Share Document