Tuned Damping of an Air-Mounted Isolation System

2004 ◽  
Author(s):  
Reza Kashani ◽  
Kazim Mirza
Keyword(s):  
Resonant Frequency ◽  
High Frequency ◽  
Low Frequency ◽  
Helmholtz Resonator ◽  
Isolation System ◽  
And Mathematics ◽  
High Level ◽  
Three Degree Of Freedom ◽  
Tuned Damper ◽  
Isolation Performance

Air mounts can provide the highest degree of isolation of any type vibration isolator. Soft-mounting, and thus high level of low-frequency isolation, with system natural frequency as low as 1 Hz can be achieved. Due to their construction, air mounts have negligible damping. Although, this almost undamped nature of air mounts enhances the high-frequency isolation, provisions should be made to address the lack of isolation resulting in excessive body displacements around the resonant frequencies, especially when the system is exposed to shock inputs. While the addition of viscous damping to the air mount is proposed in the literature but it is not recommended in most applications. This is because it deteriorates the mount’s high-frequency isolation performance. Instead, it would be highly desirable to add tuned damping to the mounted system at its resonant frequency (ies). The challenge in doing so, is realizing a damper tunable to a very low frequency and yet not be prohibitively large. A novel tuned damping mechanism is proposed in this paper. It adds damping to an air mount only at the resonant frequency (ies), via a bi-fluid Helmholtz resonator. In an illustrative example the mechanics and mathematics (modeling) of a one and three degree of freedom air mounted systems equipped with a tuned damper, as well as the tuning of such damper are discussed. The example also demonstrates the effectiveness of the air mount with the tuned damper.

scholarly journals Analysis and design of the power law damping based on the nonlinear vessel isolation system

2018 ◽  
Vol 10 (12) ◽  
pp. 168781401881719 ◽  
Author(s):  
You Wang ◽  
Xinghua Zhu ◽  
Rong Zheng ◽  
Zhe Tang ◽  
Bingbing Chen
Keyword(s):  
Resonant Frequency ◽  
Working Conditions ◽  
Power Law ◽  
Nonlinear Damping ◽  
Frequency Region ◽  
Isolation System ◽  
Analysis And Design ◽  
Force Transmissibility ◽  
Isolation Systems ◽  
Isolation Performance

In this study, the applications of the cubic power law damping in vessel isolation systems are investigated. The isolation performance is assessed using the force transmissibility of the vessel isolation system, which is simplified as a multiple-degree-of-freedom system with two parallel freedoms. The force transmissibilities of different working conditions faced in practice are discussed by applying the cubic power law damping on different positions of the vessel isolation system. Numerical results indicate that by adding the cubic power law damping to an appropriate position, the isolation system can not only suppress the force transmissibility over the resonant frequency region but also keep the force transmissibility unaffected at the nonresonant frequency region. Moreover, the design of the nonlinear vessel isolation system is discussed by finding the optimal nonlinear damping of the isolation system.

scholarly journals Acoustic notch filtering earmuff utilizing Helmholtz resonator arrays

PLoS ONE ◽  
2021 ◽  
Vol 16 (10) ◽  
pp. e0258842
Author(s):  
Fumiya Mizukoshi ◽  
Hidetoshi Takahashi
Keyword(s):  
Resonant Frequency ◽  
Noise Control ◽  
Active Noise Control ◽  
Low Frequency ◽  
Helmholtz Resonator ◽  
Honeycomb Structure ◽  
Sound Insulation ◽  
Frequency Noise ◽  
Target Frequency ◽  
Notch Filtering

In recent years, noisy bustling environments have created situations in which earmuffs must soundproof only specific noise while transmitting significant sounds, such as voices, for work safety and efficiency. Two sound insulation technologies have been utilized: passive noise control (PNC) and active noise control (ANC). However, PNC is incapable of insulating selective frequencies of noise, and ANC is limited to low-frequency sounds. Thus, it has been difficult for traditional earmuffs to cancel out only high-frequency noise that people feel uncomfortable hearing. Here, we propose an acoustic notch filtering earmuff utilizing Helmholtz resonator (HR) arrays that provides a sound attenuation effect around the tuneable resonant frequency. A sheet-like sound insulating plate comprising HR arrays is realized in a honeycomb structure. Since the resonant frequency is determined by the geometry of the HR arrays, a highly audible sound region can be designed as the target frequency. In this research, the acoustic notch filtering performance of the proposed HR array plate is investigated in both simulations and experiments. Furthermore, the fabricated earmuffs using the novel HR array plates achieve a sound insulation performance exceeding 40 dB at the target frequency, which is sufficiently high compared to that of conventional earmuffs. The experimental results confirm that the proposed device is a useful approach for insulating frequency-selective sound.

scholarly journals Cochlear compound action potentials from high-level tone bursts originate from wide cochlear regions that are offset toward the most sensitive cochlear region

2019 ◽  
Vol 121 (3) ◽  
pp. 1018-1033 ◽  
Author(s):  
C. Lee ◽  
J. J. Guinan ◽  
M. A. Rutherford ◽  
W. A. Kaf ◽  
K. M. Kennedy ◽  
...  
Keyword(s):  
High Frequency ◽  
Action Potentials ◽  
Tuning Curve ◽  
Low Frequency ◽  
Sound Level ◽  
Frequency Tone ◽  
Compound Action Potentials ◽  
High Level ◽  
Level Tone ◽  
Compound Action

Little is known about the spatial origins of auditory nerve (AN) compound action potentials (CAPs) evoked by moderate to intense sounds. We studied the spatial origins of AN CAPs evoked by 2- to 16-kHz tone bursts at several sound levels by slowly injecting kainic acid solution into the cochlear apex of anesthetized guinea pigs. As the solution flowed from apex to base, it sequentially reduced CAP responses from low- to high-frequency cochlear regions. The times at which CAPs were reduced, combined with the cochlear location traversed by the solution at that time, showed the cochlear origin of the removed CAP component. For low-level tone bursts, the CAP origin along the cochlea was centered at the characteristic frequency (CF). As sound level increased, the CAP center shifted basally for low-frequency tone bursts but apically for high-frequency tone bursts. The apical shift was surprising because it is opposite the shift expected from AN tuning curve and basilar membrane motion asymmetries. For almost all high-level tone bursts, CAP spatial origins extended over 2 octaves along the cochlea. Surprisingly, CAPs evoked by high-level low-frequency (including 2 kHz) tone bursts showed little CAP contribution from CF regions ≤ 2 kHz. Our results can be mostly explained by spectral splatter from the tone-burst rise times, excitation in AN tuning-curve “tails,” and asynchronous AN responses to high-level energy ≤ 2 kHz. This is the first time CAP origins have been identified by a spatially specific technique. Our results show the need for revising the interpretation of the cochlear origins of high-level CAPs-ABR wave 1. NEW & NOTEWORTHY Cochlear compound action potentials (CAPs) and auditory brain stem responses (ABRs) are routinely used in laboratories and clinics. They are typically interpreted as arising from the cochlear region tuned to the stimulus frequency. However, as sound level is increased, the cochlear origins of CAPs from tone bursts of all frequencies become very wide and their centers shift toward the most sensitive cochlear region. The standard interpretation of CAPs and ABRs from moderate to intense stimuli needs revision.

scholarly journals Measurement of an Analyte Concentration in Test Solution by Using Helmholtz Resonator for Biosensor Applications

Sensors ◽  
2019 ◽  
Vol 19 (5) ◽  
pp. 1127 ◽  
Author(s):  
Yugang Chen ◽  
Yong-Hwa Park
Keyword(s):  
Resonant Frequency ◽  
Low Frequency ◽  
Helmholtz Resonator ◽  
Acoustic Resonance ◽  
Acoustic Power ◽  
Test Solution ◽  
Frequency Change ◽  
Analyte Concentration ◽  
Resonator System ◽  
Higher Sensitivity

In this paper, an indirect method of measuring an analyte concentration in a test solution using the resonant frequency change of a Helmholtz resonator is proposed, using a novel architecture of Helmholtz resonator filled with two kinds of fluids (fixed fluid and test solution). Since the analyte concentration yields changes of density and sound speed of the test solution, the resonant frequency of the proposed Helmholtz resonator is affected by the analyte concentration of the test solution. From this effect, the analyte concentration of the test solution can be measured by the spectrum of acoustic resonance of the Helmholtz resonator. The experiment was done using a 3D-printed Helmholtz resonator system with an acoustic power source and detectors, which is consistent with analytical results and showed that the analyte concentration can be measured with higher sensitivity compared to conventional cantilever-type sensors. As an example application, the possibility of measuring glucose concentration of human blood was demonstrated, showing higher sensitivity and relatively low frequency range compared to previous resonance based methods.

Opuntia Ficus Indica Increases Heart-Rate Variability in High-Level Athletes

2008 ◽  
Vol 18 (2) ◽  
pp. 169-178 ◽  
Author(s):  
Laurent Schmitt ◽  
Jean-Pierre Fouillot ◽  
Gérard Nicolet ◽  
Alain Midol
Keyword(s):  
Heart Rate ◽  
Heart Rate Variability ◽  
High Frequency ◽  
Low Frequency ◽  
Physiological Effects ◽  
Opuntia Ficus Indica ◽  
Diet Supplement ◽  
High Frequency Activity ◽  
High Level

Opuntia ficus indica (OFI) has many physiological effects, but a relationship between OFI and heart-rate variability (HRV) has never been established. The aim of this study was to describe the effects of a diet supplement of OFI on HRV in athletes. The first day, heart rate (HR) was measured at rest in supine (SU) and standing (ST) positions to analyze HRV in 10 athletes, followed by a randomized assignment to an OFI (5) or placebo (5) group. The next day, the athletes repeated the HRV test. One month later the crossover protocol was applied. In OFI, the high-frequency-activity HFSU (1,773 ± 2,927 vs. 5,856 ± 8,326 ms2, p < .05), HFST (295 ± 313 vs. 560 ± 515 ms2, p < .05), and low-frequency LFSU (1,621 ± 1,795 vs. 6,029 ± 9,007 ms2, p < .01) increased. HRSU (66 ± 13 vs. 57 ± 11 beats/min, p < .01) and HRST (87 ± 11 vs. 76 ± 9 beats/min, p < .01) decreased. A diet supplement of OFI increases HF and LF activities and decreases HR.

Speed of Processing and Stimulus Complexity in Low-Frequency and High-Frequency Channels

Perception ◽  
1997 ◽  
Vol 26 (8) ◽  
pp. 1039-1045 ◽  
Author(s):  
Rainer Hoeger
Keyword(s):  
High Frequency ◽  
Target Identification ◽  
Low Frequency ◽  
Object Perception ◽  
Stimulus Complexity ◽  
Frequency Information ◽  
Intensity Changes ◽  
Low Pass ◽  
Frequency Components ◽  
High Level

Studies of the microgenesis of perception led to the hypothesis that global aspects of objects are processed faster than their details. If one starts with the assumption that low-frequency information of objects corresponds to the global, and high-frequency information to the local aspects, recognising objects should rely at first on information from the low-frequency channels and afterwards from that of the high-frequency channels. The priming paradigm provides a mean of investigating experimentally the temporal availability of low-frequency and high-frequency information in object perception. In the experiments subjects had to respond to target objects preceded either by related or by unrelated priming stimuli, which consisted of low-pass-filtered and high-pass-filtered versions of the objects. With the influence of stimulus complexity controlled, pictures of objects were chosen that varied in the number of intensity changes in the high-frequency components, with those of the low-frequency components kept constant. The exposure duration of each prime was varied between 40 and 100 ms. The results indicated that target identification only profits more from low-frequency than from high-frequency primes if the high-frequency information has a high level of complexity. If the number of intensity changes in the high-frequency components of the prime is low, target identification is most strongly facilitated. The results are discussed in terms of models which focus on organising principles at different scales.

scholarly journals Numerical investigation on low-frequency noise damping performances of Helmholtz resonators with an extended neck in presence of a grazing flow

2021 ◽  
pp. 146134842110205
Author(s):  
Weiwei Wu ◽  
Yiheng Guan
Keyword(s):  
Resonant Frequency ◽  
Stokes Equations ◽  
Transmission Loss ◽  
Low Frequency ◽  
Helmholtz Resonator ◽  
Frequency Noise ◽  
Frequency Range ◽  
Helmholtz Resonators ◽  
Numerical Predictions ◽  
Grazing Flow

In this work, modified designs of Helmholtz resonators with extended deflected neck are proposed, numerically evaluated and optimized aiming to achieve a better transmission loss performance over a broader frequency range. For this, 10 Helmholtz resonators with different extended neck configurations (e.g. the angle between extended neck and the y-axis) in the presence of a grazing flow are assessed. Comparison is then made between the proposed resonators and the conventional one, i.e. in the absence of an extended neck (i.e. Design A). For this, a two-dimensional linearized Navier Stokes equations-based model of a duct with the modified Helmholtz resonator implemented was developed in frequency domain. The model was first validated by comparing its numerical predictions with the experimental results available in the literature and the theoretical results. The model was then applied to evaluate the noise damping performance of the Helmholtz resonator with (1) an extended neck on the upstream side (Design B); (2) on the downstream side (Design C), (3) both upstream and downstream sides (Design D), (4) the angle between the extended neck and the y-axis, i.e. (a) 0°, (b) 30°, and (c) 45°, (d) 48.321°. In addition, the effects of the grazing flow Mach number (Ma) were evaluated. It was found that the transmission loss peaks of the Helmholtz resonator with the extended neck was maximized at Ma = 0.03 than at the other Mach numbers. Conventional resonator, i.e. Design A was observed to be associated with a lower transmission loss performance at a lower resonant frequency than those as observed on Designs B–D. Moreover, the optimum design of the proposed resonators with the extended neck is shown to be able to shift the resonant frequency by approximately 90 Hz, and maximum transmission loss could be increased by 28–30 dB. In addition, the resonators with extended necks are found to be associated with two or three transmission loss peaks, indicating that these designs have a broader effective frequency range. Finally, the neck deflection angles of 30° and 45° are shown to be involved with better transmission loss peaks than that with a deflection angle of 0°. In summary, the present study sheds light on maximizing the resonator’s noise damping performances by applying and optimizing an extended neck.

scholarly journals Masking of low-frequency signals by high-frequency, high-level narrow bands of noise

2011 ◽  
Vol 129 (2) ◽  
pp. 876-887 ◽  
Author(s):  
Harisadhan Patra ◽  
Christina M. Roup ◽  
Lawrence L. Feth
Keyword(s):  
High Frequency ◽  
Low Frequency ◽  
High Level ◽  
Narrow Bands

Remote sensing imaging simulation and cloud removal

2017 ◽  
Vol 31 (16-19) ◽  
pp. 1744079 ◽  
Author(s):  
Xifang Zhu ◽  
Feng Wu ◽  
Tao Wu ◽  
Chunyu Zhao
Keyword(s):  
Remote Sensing ◽  
Wavelet Transform ◽  
High Frequency ◽  
Low Frequency ◽  
Simulation Method ◽  
Complex Wavelet Transform ◽  
Remote Sensing Images ◽  
Low Level ◽  
Cloud Removal ◽  
High Level

Cloud obstacles obscure ground information frequently during remote sensing imaging which leads to valuable information losses. Removing clouds from a single image becomes challenging since no reference images containing cloud-free regions are available. In order to study cloud removal technologies and evaluate their performances, a method to simulate evenly and unevenly distributed clouds was proposed by analyzing the physical model of remote sensing imaging. Dual tree complex wavelet transform (DTCWT) and its features were introduced briefly. According to the frequency relationships between clouds and ground objects in remote sensing images, a novel cloud removal algorithm was proposed. The algorithm divided the cloud-contaminated image into low-level high frequency sub-bands, high-level high frequency sub-bands and low frequency sub-band by DTCWT. Low-level high frequency sub-bands were filtered to enhance the ground object information by Laplacian sharpening. The other two types of sub-bands were processed to remove clouds by cloud cover coefficient weighting (CCCW). The experiments were implemented to process cloud disturbed images produced by the proposed simulation method. The results of cloud removal from remote sensing images were analyzed. It proved the proposed algorithm is greatly superior to algorithms based on traditional wavelet transform and dark channel prior.

Heart rate and blood pressure variabilities during graded head-up tilt

1995 ◽  
Vol 78 (1) ◽  
pp. 212-216 ◽  
Author(s):  
S. Mukai ◽  
J. Hayano
Keyword(s):  
Blood Pressure ◽  
Heart Rate ◽  
Tilt Angle ◽  
High Frequency ◽  
Low Frequency ◽  
Normal Subjects ◽  
Arterial Baroreflex ◽  
Frequency Components ◽  
Head Up Tilt ◽  
High Level

We investigated the responses of the frequency components of heart rate (HR) and blood pressure (BP) variabilities to progressive changes in autonomic activity induced by the graded head-up tilt technique in 12 normal subjects (age 19–27 yr) under the condition of frequency-controlled respiration (0.25 Hz). During low-level tilt (0–30 degrees), the R-R interval was unchanged and the amplitude of the high-frequency (HF; 0.25 Hz) component of HR variability showed only a slight insignificant decrease. The amplitude of the low-frequency (LF; 0.04–0.15 Hz) component of HR variability increased progressively as the angle increased (P < 0.05). During high-level tilt (30–90 degrees), the R-R interval and the HF amplitude of HR variability decreased progressively with tilt angle (P < 0.001 for both). The LF amplitude of HR variability peaked at a tilt angle of 30 degrees. The LF-to-HF ratio of HR variability and the LF amplitude of systolic and diastolic BP variabilities increased progressively as the tilt angle increased from 0 to 60 degrees (P < 0.001), although systolic and diastolic BPs were unchanged. These results suggest that mixed autonomic responses to orthostatic stress, which are thought to be mediated by both cardiopulmonary and arterial baroreflex mechanisms, can be distinguished by changes in the frequency components of HR and BP variabilities.

Sign in / Sign up

Export Citation Format

Share Document