Identification of the Coherent Structures in Multiple Impinging Jets

2011 ◽  
Author(s):  
Martin Draksler ◽  
Bosˇtjan Koncˇar
Keyword(s):  
Heat Transfer ◽  
Coherent Structures ◽  
Stokes Equations ◽  
Turbine Blades ◽  
Heat Removal ◽  
Local Heat ◽  
Impinging Jets ◽  
Industrial Applications ◽  
Interaction Region ◽  
Flow Structures

An array of impinging jets is characterized by high heat removal capability. As such it is used as a cooling technique in various industrial applications, i.e. paper drying, turbine blades cooling etc. The objective of the current study is to analyze the coherent structures in the interaction region of impinging jets and relate them to the local heat transfer. Since they play the major role in the local heat enhancement, their proper identification is crucial for the understanding of the heat transfer mechanisms. Three different methods for identification of flow structures in the jet interaction region are discussed in the paper. Heat transfer capability of different jet arrangements (in-line and hexagonal) are compared and analyzed in the context of flow structures comparison. The numerical simulations were performed with the CFD code ANSYS-CFX, solving Reynolds Averaged Navier-Stokes Equations (RANS approach). For the turbulence modeling Shear Stress Transport (SST) turbulence model was used.

Heat Transfer Enhancement by Turbulent Impinging Jets

2000 ◽  
Author(s):  
M. Kumagai ◽  
R. S. Amano ◽  
M. K. Jensen
Keyword(s):  
Heat Transfer ◽  
Heat Transfer Coefficient ◽  
Transfer Coefficient ◽  
Stokes Equations ◽  
Local Heat Transfer ◽  
Local Heat ◽  
Impinging Jets ◽  
Transfer Model ◽  
Transfer Coefficients ◽  
Heat Transfer Coefficients

Abstract A numerical and experimental investigation on cooling of a solid surface was performed by studying the behavior of an impinging jet onto a fixed flat target. The local heat transfer coefficient distributions on a plate with a constant heat flux were computationally investigated with a normally impinging axisymmetric jet for nozzle diameter of 4.6mm at H/d = 4 and 10, with the Reynolds numbers of 10,000 and 40,000. The two-dimensional cylindrical Navier-Stokes equations were solved using a two-equation k-ε turbulence model. The finite-volume differencing scheme was used to solve the thermal and flow fields. The predicted heat transfer coefficients were compared with experimental measurements. A universal function based on the wave equation was developed and applied to the heat transfer model to improve calculated local heat transfer coefficients for short nozzle-to-plate distance (H/d = 4). The differences between H/d = 4 and 10 due to the correlation among heat transfer coefficient, kinetic energy and pressure were investigated for the impingement region. Predictions by the present model show good agreement with the experimental data.

Numerical Analysis of Convection Heat Transfer From an Array of Circular Perforated Fins due to Variable Perforation Size

2012 ◽  
Author(s):  
A. H. Dastbelaraki ◽  
M. Yaghoubi
Keyword(s):  
Heat Transfer ◽  
Numerical Analysis ◽  
Stokes Equations ◽  
Experimental Studies ◽  
Convection Heat Transfer ◽  
Heat Removal ◽  
Industrial Applications ◽  
Working Fluid ◽  
Manufacturing Cost ◽  
Convection Heat

Among rapid advances of electrical systems electronic circuit boards have become more compact and heat production rate from their components increased considerably. Such developments raised more attention and tendency in tackling their cooling problems. A wide variety of cooling systems are developed such as various fins for decreasing the circuit board temperature. Extended surfaces or fins are good heat transfer equipments that are used for various industrial applications. The wide industrial applications of fins to enhance heat transfer rate highlighted the need for further research of optimization of fins to increase their thermal performances. Among various fin types, rectangular fins are commonly used due to their simplicity of manufacturing. Fin configurations affect the cooling rate significantly, hence a comprehensive parametric study on the fin geometries may be improve their performance. Rectangular fins show a good performance of increasing heat removal rate, while reducing the manufacturing cost. Moreover the inspiration of putting holes along the flow through the fins may be very helpful in increasing the heat removal and reduction of the needed material. The present study investigates a numerical analysis of three dimensional, turbulent convection heat transfer from an array of rectangular perforated fins with increasing the perforation size from bottom to top. The perforations considered are like circular channels along the length of fins and the number of perforations is 3. For investigation, incompressible air as working fluid is modeled using Navier–Stokes equations. RNG based k-ε turbulent model is used to predict turbulent flow parameters. Temperature field inside the fins is obtained by solving Fourier’s conduction equation. The conjugate differential equations for both solid and gas phase are solved simultaneously by finite volume procedure using SIMPLE algorithm. Flow and heat transfer characteristics are presented for Reynolds numbers from 2 × 104 to 4 × 104 based on the fin length and Prandtl number of Pr = 0.71. Numerical model is first validated with previous experimental studies and good agreements were observed. Based on the valid simulation model, numerical solution is made to find flow field and temperature distribution for various perforation size. Results show that for a specific type of perforated fins the fin effectiveness is higher than other types and drag coefficient decreases with increasing the perforation size.

Heat Transfer Enhancement for Turbine Blade Internal Cooling

2013 ◽  
Author(s):  
Lesley M. Wright ◽  
Je-Chin Han
Keyword(s):  
Heat Transfer ◽  
Turbine Blade ◽  
Gas Turbines ◽  
Critical Role ◽  
Turbine Blades ◽  
Internal Heat ◽  
Impinging Jets ◽  
Industrial Applications ◽  
Internal Cooling ◽  
Heat Transfer Augmentation

Gas turbines are used extensively for aircraft propulsion, land-based power generation, and industrial applications. The turbine inlet temperatures are far above the permissible metal temperatures. Therefore, there is a need to cool the blades for safe operation. Modern developments in turbine cooling technology play a critical role in increasing the thermal efficiency and power output of advanced gas turbine designs. Turbine blades and vanes are cooled internally and externally. This paper focuses on heat transfer augmentation of turbine blade internal cooling. Internal cooling is typically achieved by passing the cooling air through rib-enhanced serpentine passages inside the blades. Impinging jets, pin fins and dimples are also used for enhancing internal cooling heat transfer. In the past 10 years, there has been considerable progress in turbine blade internal cooling research and this paper is emphasized on reviewing selected publications to reflect recent developments in this area. In particular, this paper focuses on the newly developed design concepts as well as the combination of existing cooling techniques for turbine airfoil internal heat transfer augmentation. Rotation effects on the turbine blade leading-edge, triangular-shaped channel, mid-chord multi-pass channel and trailing-edge, wedge-shaped channel with coolant ejection are also considered.

Experimental Investigation of Local Heat Transfer Distribution on Smooth and Roughened Surfaces Under an Array of Angled Impinging Jets

2001 ◽  
Author(s):  
Lamyaa A. El-Gabry ◽  
Deborah A. Kaminski
Keyword(s):  
Heat Transfer ◽  
Reynolds Number ◽  
Cross Flow ◽  
Local Heat Transfer ◽  
Reynolds Numbers ◽  
Local Heat ◽  
Impinging Jets ◽  
Transfer Coefficients ◽  
Heat Transfer Coefficients ◽  
Roughened Surface

Abstract Measurements of the local heat transfer distribution on smooth and roughened surfaces under an array of angled impinging jets are presented. The test rig is designed to simulate impingement with cross-flow in one direction which is a common method for cooling gas turbine components such as the combustion liner. Jet angle is varied between 30, 60, and 90 degrees as measured from the impingement surface, which is either smooth or randomly roughened. Liquid crystal video thermography is used to capture surface temperature data at five different jet Reynolds numbers ranging between 15,000 and 35,000. The effect of jet angle, Reynolds number, gap, and surface roughness on heat transfer efficiency and pressure loss is determined along with the various interactions among these parameters. Peak heat transfer coefficients for the range of Reynolds number from 15,000 to 35,000 are highest for orthogonal jets impinging on roughened surface; peak Nu values for this configuration ranged from 88 to 165 depending on Reynolds number. The ratio of peak to average Nu is lowest for 30-degree jets impinging on roughened surfaces. It is often desirable to minimize this ratio in order to decrease thermal gradients, which could lead to thermal fatigue. High thermal stress can significantly reduce the useful life of engineering components and machinery. Peak heat transfer coefficients decay in the cross-flow direction by close to 24% over a dimensionless length of 20. The decrease of spanwise average Nu in the crossflow direction is lowest for the case of 30-degree jets impinging on a roughened surface where the decrease was less than 3%. The decrease is greatest for 30-degree jet impingement on a smooth surface where the stagnation point Nu decreased by more than 23% for some Reynolds numbers.

scholarly journals Oscillator Fin as a Novel Heat Transfer Augmentation Device for Gas Turbine Cooling Applications

1998 ◽  
Author(s):  
Oguz Uzol ◽  
Cengiz Camci
Keyword(s):  
Heat Transfer ◽  
Kinetic Energy ◽  
Gas Turbine ◽  
Turbulent Kinetic Energy ◽  
Stokes Equations ◽  
Turbine Blades ◽  
Local Heat Transfer ◽  
Internal Cooling ◽  
Pin Fin ◽  
Heat Transfer Augmentation

A new concept for enhanced turbulent transport of heat in internal coolant passages of gas turbine blades is introduced. The new heat transfer augmentation component called “oscillator fin” is based on an unsteady flow system using the interaction of multiple unsteady jets and wakes generated downstream of a fluidic oscillator. Incompressible, unsteady and two dimensional solutions of Reynolds Averaged Navier-Stokes equations are obtained both for an oscillator fin and for an equivalent cylindrical pin fin and the results are compared. Preliminary results show that a significant increase in the turbulent kinetic energy level occur in the wake region of the oscillator fin with respect to the cylinder with similar level of aerodynamic penalty. The new concept does not require additional components or power to sustain its oscillations and its manufacturing is as easy as a conventional pin fin. The present study makes use of an unsteady numerical simulation of mass, momentum, turbulent kinetic energy and dissipation rate conservation equations for flow visualization downstream of the new oscillator fin and an equivalent cylinder. Relative enhancements of turbulent kinetic energy and comparisons of the total pressure field from transient simulations qualitatively suggest that the oscillator fin has excellent potential in enhancing local heat transfer in internal cooling passages without significant aerodynamic penalty.

Development of High Order LES Solver for Heat Transfer Applications Based on the Open Source OpenFOAM Framework

2015 ◽  
Author(s):  
Luca Mangani ◽  
David Roos Launchbury ◽  
Ernesto Casartelli ◽  
Giulio Romanelli
Keyword(s):  
Heat Transfer ◽  
Open Source ◽  
Gas Turbines ◽  
Incompressible Flows ◽  
Stokes Equations ◽  
Turbulence Models ◽  
Local Heat Transfer ◽  
Local Heat ◽  
High Order ◽  
Computational Time

The computation of heat transfer phenomena in gas turbines plays a key role in the continuous quest to increase performance and life of both component and machine. In order to assess different cooling approaches computational fluid dynamics (CFD) is a fundamental tool. Until now the task has often been carried out with RANS simulations, mainly due to the relatively short computational time. The clear drawback of this approach is in terms of accuracy, especially in those situations where averaged turbulence-structures are not able to capture the flow physics, thus under or overestimating the local heat transfer. The present work shows the development of a new explicit high-order incompressible solver for time-dependent flows based on the open source C++ Toolbox OpenFOAM framework. As such, the solver is enabled to compute the spatially filtered Navier-Stokes equations applied in large eddy simulations for incompressible flows. An overview of the development methods is provided, presenting numerical and algorithmic details. The solver is verified using the method of manufactured solutions, and a series of numerical experiments is performed to show third-order accuracy in time and low temporal error levels. Typical cooling devices in turbomachinery applications are then investigated, such as the flow over a turbulator geometry involving heated walls and a film cooling application. The performance of various sub-grid-scale models are tested, such as static Smagorinsky, dynamic Lagrangian, dynamic one-equation turbulence models, dynamic Smagorinsky, WALE and sigma-model. Good results were obtained in all cases with variations among the individual models.

scholarly journals Effect of Discrete Ribs on Heat Transfer and Friction Inside Narrow Rectangular Cross Section Cooling Passage of Gas Turbine Blade

2021 ◽  
Vol 10 (6) ◽  
pp. 192-209
Author(s):  
Karthik Krishnaswamy ◽  
◽  
Srikanth Salyan ◽  
Keyword(s):  
Heat Transfer ◽  
Gas Turbine ◽  
Turbine Blade ◽  
Turbine Blades ◽  
Local Heat Transfer ◽  
Local Heat ◽  
Hydraulic Diameter ◽  
Transfer Coefficients ◽  
Heat Transfer Coefficients ◽  
Cooling Passage

The performance of a gas turbine during the service life can be enhanced by cooling the turbine blades efficiently. The objective of this study is to achieve high thermohydraulic performance (THP) inside a cooling passage of a turbine blade having aspect ratio (AR) 1:5 by using discrete W and V-shaped ribs. Hydraulic diameter (Dh) of the cooling passage is 50 mm. Ribs are positioned facing downstream with angle-of-attack (α) of 30° and 45° for discrete W-ribs and discerte V-ribs respectively. The rib profiles with rib height to hydraulic diameter ratio (e/Dh) or blockage ratio 0.06 and pitch (P) 36 mm are tested for Reynolds number (Re) range 30000-75000. Analysis reveals that, area averaged Nusselt numbers of the rib profiles are comparable, with maximum difference of 6% at Re 30000, which is within the limits of uncertainty. Variation of local heat transfer coefficients along the stream exhibited a saw tooth profile, with discrete W-ribs exhibiting higher variations. Along spanwise direction, discrete V-ribs showed larger variations. Maximum variation in local heat transfer coefficients is estimated to be 25%. For experimented Re range, friction loss for discrete W-ribs is higher than discrete-V ribs. Rib profiles exhibited superior heat transfer capabilities. The best Nu/Nuo achieved for discrete Vribs is 3.4 and discrete W-ribs is 3.6. In view of superior heat transfer capabilities, ribs can be deployed in cooling passages near the leading edge, where the temperatures are very high. The best THPo achieved is 3.2 for discrete V-ribs and 3 for discrete W-ribs at Re 30000. The ribs can also enhance the power-toweight ratio as they can produce high thermohydraulic performances for low blockage ratios.

Sign in / Sign up

Export Citation Format

Share Document