The Assessment of Locally Thinned Areas Subject to a Hoop Stress and an Axial Stress: Background to the Guidance Given in Annex G of BS 7910:2013

2019 ◽  
Author(s):  
Andrew Cosham ◽  
Robert Andrews
Keyword(s):  
Internal Pressure ◽  
Axial Force ◽  
Hoop Stress ◽  
Axial Stress ◽  
Bending Moment ◽  
Full Scale ◽  
Plane Bending

Abstract Annex G Assessment of locally thinned areas (LTAs) in BS 7910:2013 is applicable to LTAs in cylinder, a bend and a sphere or vessel end. It can be used to assess the longitudinally-orientated LTA in a cylinder subject to a hoop stress and a circumferentially-orientated LTA in a cylinder subject to an axial stress (due to axial force, in-plane bending moment and internal pressure), and also to assess an LTA subject to a hoop stress and an axial stress. An outline of the origins of Annex G is given. A comparison with full-scale burst tests of pipes or vessels containing LTAs subject to a hoop stress and an axial stress is presented. It is demonstrated that the method in G.4.3 Hoop stress and axial stress is conservative.

scholarly journals Stress Distribution Analysis of DKDT Tubular Joint in a Minimum Offshore Structure

Rekayasa ◽  
2021 ◽  
Vol 14 (2) ◽  
pp. 191-199
Author(s):  
Irma Noviyanti ◽  
Rudi Walujo Prastianto ◽  
Murdjito Murdjito
Keyword(s):  
Finite Element ◽  
Stress Distribution ◽  
Axial Force ◽  
Oil And Gas ◽  
Bending Moment ◽  
Out Of Plane ◽  
Tubular Joint ◽  
Plane Bending ◽  
Intersection Line ◽  
Marginal Field

A marginal field defines as an oil and/or gas field that has a short production period, low proven reservoir, and could not be exploited using existing technology. As the demand for oil and gas keeps increasing, one of the solutions to tackle the issues is to build the modified platform which came to be more minimalist to conduct the oil and gas production in the marginal field. Naturally, the minimum offshore structures are cost less but low in redundancy, therefore, pose more risks. Although the study on the minimum structures is still uncommon, there are opportunities to find innovative systems that need to have a further analysis toward such invention. Therefore, this study took the modified jacket platform as a minimum structure, and local stresses analysis by using finite element method is applied for the most critical tubular joint with multiplanarity of the joint is taking into account. The analysis was carried out using the finite element program of Salome Meca with three-dimensional solid elements are used to model the multiplanar joint. Various loading types of axial force, in-plane bending moment, and out-of-plane bending moment are applied respectively to investigate the stress distribution along the brace-chord intersection line of the tubular joint. The results show that the hotspot stress occurred at a different point along each brace-chord intersection line for each loading type. Finally, as compared to the in-plane bending moment or out-of-plane bending moment loading types, the axial force loading state is thought to generate greater hotspot stress.

Plastic Collapse Assessment Procedure in P-M Diagram Method for Pipe Bends With a Local Thin Area Under Combined Pressure and Out-of-Plane Bending Moment

2012 ◽  
Author(s):  
Kenji Oyamada ◽  
Shinji Konosu ◽  
Takashi Ohno
Keyword(s):  
Internal Pressure ◽  
Pressure Ratio ◽  
Bending Moment ◽  
Piping System ◽  
Assessment Procedure ◽  
Plastic Collapse ◽  
Diagram Method ◽  
Out Of Plane ◽  
Plane Bending ◽  
Collapse Assessment

Pipe bends are common elements in piping system such as power or process piping, and local thinning are typically occurred on pipe bends due to erosion or corrosion. Therefore, it is important to establish the plastic collapse condition for pipe bends having a local thin area (LTA) under combined internal pressure and external bending moment. In this paper, a simplified plastic collapse assessment procedure in p-M (internal pressure ratio and external bending moment ratio) diagram method for pipe bends with a local thin area simultaneously subjected to internal pressure, p, and external out-of-plane bending moment, M, due to earthquake, etc., is proposed, which is derived from the reference stress. In this paper, only cases of that an LTA is located in the crown of pipe bends are considered. The plastic collapse loads derived from the p-M diagram method are compared with the results of both experiments and FEA for pipe bends of the same size with various configurations of an LTA.

Evaluation of collapse moment of pressurized 30°–180° bend pipes subjected to out-of-plane bending moment

2021 ◽  
pp. 095440622110614
Author(s):  
Manish Kumar ◽  
Pronab Roy ◽  
Kallol Khan
Keyword(s):  
Finite Element ◽  
Internal Pressure ◽  
Plastic Material ◽  
Bending Moment ◽  
Bend Angle ◽  
Pipe Bend ◽  
Geometric Imperfection ◽  
Initial Geometric Imperfection ◽  
Out Of Plane ◽  
Plane Bending

The present paper determines collapse moments of pressurized 30°–180° pipe bends incorporated with initial geometric imperfection under out-of-plane bending moment. Extensive finite element analyses are carried out considering material as well as geometric nonlinearity. The twice-elastic-slope method is used to determine collapse moment. The results show that initial imperfection produces significant change in collapse moment for unpressurized pipe bends and pipe bends applied to higher internal pressure. The application of internal pressure produces stiffening effect to pipe bends which increases collapse moment up to a certain limit and with further increase in pressure, collapse moment decreases. The bend angle effect on collapse moment reduces with the increase in internal pressure and bend radius. Based on finite element results, collapse moment equations are formed as a function of the pipe bend geometry parameters, initial geometric imperfection, bend angle, and internal pressure for elastic-perfectly plastic material models.

Shakedown Boundary of a 90–Degree Back–to–Back Pipe Bend Subjected to Steady Internal Pressures and Cyclic Out–of–Plane Bending Moments

2014 ◽  
Author(s):  
Hany F. Abdalla
Keyword(s):  
Internal Pressure ◽  
Bending Moment ◽  
Bending Moments ◽  
Pipe Bend ◽  
Structure Comparison ◽  
Out Of Plane ◽  
Plane Bending ◽  
Shakedown Limit ◽  
Elastic Shakedown ◽  
Internal Pressures

Ninety degree back–to–back pipe bends are extensively utilized within piping networks of modern nuclear submarines and modern turbofan aero–engines where space limitation is considered a supreme concern. According the author’s knowledge, no shakedown analysis exists for such structure based on experimental data. In the current research, the pipe bend setup analyzed is subjected to a spectrum of steady internal pressures and cyclic out–of–plane bending moments. A previously developed direct non–cyclic simplified technique, for determining elastic shakedown limit loads, is utilized to generate the elastic shakedown boundary of the analyzed structure. Comparison with the elastic shakedown boundary of the same structure, but subjected to cyclic in–plane bending moments revealed a higher shakedown boundary for the out–of–plane bending loading configuration with a maximum bending moment ratio of 1.4 within the low steady internal pressure spectrum. The ratio decreases towards the medium to high internal pressure spectrum. The simplified technique outcomes showed excellent correlation with the results of full elastic–plastic cyclic loading finite element simulations.

Study on Numerical Simulation for Failure Process of Girder Bridge under Seismic Influence

2012 ◽  
Vol 530 ◽  
pp. 122-129
Author(s):  
Hong Kai Chen ◽  
Hong Mei Tang ◽  
Ting Hu ◽  
Yi Hu ◽  
Xiao Ying He
Keyword(s):  
Seismic Response ◽  
Axial Force ◽  
Response Spectrum ◽  
Failure Process ◽  
Bending Moment ◽  
Shearing Force ◽  
Element Analysis ◽  
Seismic Force ◽  
Plane Bending ◽  
Girder Bridge

Based on the finite element analysis software Midas, it takes response spectrum analysis, and posts the failure mechanism and characteristics of Girder Bridge under intense earthquake. Through the seismic response spectrum displacement maps of Girder Bridge, it finds out that the abutment and foundation deformation is in evidence, especially the top of abutment foundation. Through the study of seismic internal force variation on girder and pier, it indicates that the longitudinal earthquake controls axial force, vertical shearing force and in-plane bending moment, transversal earthquake dominates transversal shearing force and out-planes bending moment. And it shows that the pier and mid-span section are seismic response sensitivity parts. The three parts, axial force, longitudinal shearing force and in-plane bending moment, becomes the controlling index of pier intensity. According to the seismic response spectrum displacement for pier and abutment, the transversal anti-seismic stiffness of pier is smaller than longitudinal one, longitudinal seismic force shows no effect on transversal displacement, and the transversal seismic force can augments longitudinal displacement. At the same condition, longitudinal seismic force changes the longitudinal distributing form of abutment and concaves it deeply, and the transversal seismic force can not change its shape, but augment its value.

Effect of Bend Angle on Gross Plastic Deformation of Pipe Bends for Out-of-Plane Bending: A Study Using Plastic Work Curvature Method

2016 ◽  
Author(s):  
Anindya Bhattacharya ◽  
Sachin Bapat ◽  
Hardik Patel ◽  
Shailan Patel ◽  
Michael P. Cross
Keyword(s):  
Plastic Deformation ◽  
Internal Pressure ◽  
Bending Moment ◽  
Plastic Work ◽  
Bend Angle ◽  
Piping System ◽  
Plastic Collapse ◽  
Pipe Bend ◽  
Out Of Plane ◽  
Plane Bending

Bends are an integral part of a piping system. Because of the ability to ovalize and warp they offer more flexibility when compared to straight pipes. Piping Code ASME B31.3 [1] provides flexibility factors and stress intensification factors for pipe bends. Like any other piping component, one of the failure mechanisms of a pipe bend is gross plastic deformation. In this paper, plastic collapse load of pipe bends have been analyzed for various bend parameters (bend parameter = tRbrm2) under internal pressure and out-of-plane bending moment for various bend angles using both small and large deformation theories. FE code ABAQUS version 6.9EF-1 has been used for the analyses. The goal of the paper is to develop an expression for plastic collapse moment for a bend using plastic work curvature method when the bend is subjected to out-of-plane bending moment and internal pressure as a function of bend angle and bend parameter.

Sign in / Sign up

Export Citation Format

Share Document