scholarly journals Nonlinear Wave Loads on Offshore Wind Turbines: Extreme Statistics and Fatigue

2019 ◽  
Author(s):  
Yu Zhang ◽  
Paul D. Sclavounos
Keyword(s):  
Nonlinear Wave ◽  
Wind Turbines ◽  
Offshore Wind ◽  
Wave Loads ◽  
Extreme Statistics ◽  
Support Structure ◽  
Nonlinear Load ◽  
Offshore Wind Turbines ◽  
Floating Offshore Wind Turbines ◽  
The Time Domain

Abstract The development is presented of an analytical model for the prediction of the stochastic nonlinear wave loads on the support structure of bottom mounted and floating offshore wind turbines. Explicit expressions are derived for the time-domain and frequency-domain nonlinear exciting forces in a seastate with significant wave height comparable to the diameter of the support structure based on the fluid impulse theory. The higher order moments of the nonlinear load are evaluated from simulated force records and the derivation of analytical expressions for the nonlinear load statistics for their efficient use in design is addressed.

scholarly journals Nonlinear Wave Loads on Offshore Wind Turbines: Extreme Statistics and Fatigue

2021 ◽  
Vol 143 (4) ◽  
Author(s):  
Yu Zhang ◽  
Paul D. Sclavounos
Keyword(s):  
Nonlinear Wave ◽  
Wind Turbines ◽  
Offshore Wind ◽  
Wave Loads ◽  
Extreme Statistics ◽  
Support Structure ◽  
Nonlinear Load ◽  
Offshore Wind Turbines ◽  
Floating Offshore Wind Turbines ◽  
The Time Domain

Abstract The development is presented of an analytical model for the prediction of the stochastic nonlinear wave loads on the support structure of bottom-mounted and floating offshore wind turbines. Explicit expressions are derived for the time-domain and frequency-domain nonlinear exciting forces in a seastate with a significant wave height comparable to the diameter of the support structure based on the fluid impulse theory. The higher-order moments of the nonlinear load are evaluated from simulated force records, and the derivation of analytical expressions for the nonlinear load statistics for their efficient use in design is addressed.

scholarly journals Offshore Wind Turbine Nonlinear Wave Loads and Their Statistics

2019 ◽  
Vol 141 (3) ◽  
Author(s):  
Paul D. Sclavounos ◽  
Yu Zhang ◽  
Yu Ma ◽  
David F. Larson
Keyword(s):  
Nonlinear Wave ◽  
Machine Learning Algorithms ◽  
Offshore Wind ◽  
Support Vector ◽  
Offshore Wind Turbine ◽  
Wave Loads ◽  
Wave Load ◽  
Support Structure ◽  
Nonlinear Load ◽  
Floating Offshore Wind Turbines

The development of an analytical model for the prediction of the stochastic nonlinear wave loads on the support structure of bottom mounted and floating offshore wind turbines is presented. Explicit expressions are derived for the time-domain nonlinear exciting forces in a sea state with significant wave height comparable to the diameter of the support structure based on the fluid impulse theory (FIT). The method is validated against experimental measurements with good agreement. The higher order moments of the nonlinear load are evaluated from simulated force records and the derivation of analytical expressions for the nonlinear load statistics for their efficient use in design is addressed. The identification of the inertia and drag coefficients of a generalized nonlinear wave load model trained against experiments using support vector machine learning algorithms is discussed.

scholarly journals Offshore Wind Turbine Nonlinear Wave Loads and Their Statistics

2017 ◽  
Author(s):  
Paul D. Sclavounos ◽  
Yu Zhang ◽  
Yu Ma ◽  
David F. Larson
Keyword(s):  
Nonlinear Wave ◽  
Machine Learning Algorithms ◽  
Offshore Wind ◽  
Support Vector ◽  
Offshore Wind Turbine ◽  
Wave Loads ◽  
Wave Load ◽  
Support Structure ◽  
Nonlinear Load ◽  
Floating Offshore Wind Turbines

The development is presented of an analytical model for the prediction of the stochastic nonlinear wave loads on the support structure of bottom mounted and floating offshore wind turbines. Explicit expressions are derived for the time-domain nonlinear exciting forces in a seastate with significant wave height comparable to the diameter of the support structure based on the fluid impulse theory. The method is validated against experimental measurements with good agreement. The higher order moments of the nonlinear load are evaluated from simulated force records and the derivation of analytical expressions for the nonlinear load statistics for their efficient use in design is addressed. The identification of the inertia and drag coefficients of a generalized nonlinear wave load model trained against experiments using Support Vector Machine learning algorithms is discussed.

scholarly journals The Effect of the Second-Order Wave Loads on Drift Motion of a Semi-Submersible Floating Offshore Wind Turbine

2020 ◽  
Vol 8 (11) ◽  
pp. 859
Author(s):  
Thanh-Dam Pham ◽  
Hyunkyoung Shin
Keyword(s):  
Wind Turbine ◽  
Wind Turbines ◽  
Second Order ◽  
Offshore Wind ◽  
Offshore Wind Turbine ◽  
Wave Loads ◽  
Hydrodynamic Loads ◽  
Drift Motion ◽  
Offshore Wind Turbines ◽  
Floating Offshore Wind Turbines

Floating offshore wind turbines (FOWTs) have been installed in Europe and Japan with relatively modern technology. The installation of floating wind farms in deep water is recommended because the wind speed is stronger and more stable. The design of the FOWT must ensure it is able to withstand complex environmental conditions including wind, wave, current, and performance of the wind turbine. It needs simulation tools with fully integrated hydrodynamic-servo-elastic modeling capabilities for the floating offshore wind turbines. Most of the numerical simulation approaches consider only first-order hydrodynamic loads; however, the second-order hydrodynamic loads have an effect on a floating platform which is moored by a catenary mooring system. At the difference-frequencies of the incident wave components, the drift motion of a FOWT system is able to have large oscillation around its natural frequency. This paper presents the effects of second-order wave loads to the drift motion of a semi-submersible type. This work also aimed to validate the hydrodynamic model of Ulsan University (UOU) in-house codes through numerical simulations and model tests. The NREL FAST code was used for the fully coupled simulation, and in-house codes of UOU generates hydrodynamic coefficients as the input for the FAST code. The model test was performed in the water tank of UOU.

Design Requirements for Floating Offshore Wind Turbines

2013 ◽  
Author(s):  
Xiaohong Chen ◽  
Qing Yu
Keyword(s):  
Wind Turbine ◽  
Case Studies ◽  
Wind Turbines ◽  
Offshore Wind ◽  
Design Parameters ◽  
Offshore Wind Turbine ◽  
Support Structure ◽  
Offshore Wind Turbines ◽  
Floating Offshore Wind Turbines ◽  
Design Requirements

This paper presents the research in support of the development of design requirements for floating offshore wind turbines (FOWTs). An overview of technical challenges in the design of FOWTs is discussed, followed by a summary of the case studies using representative FOWT concepts. Three design concepts, including a Spar-type, a TLP-type and a Semisubmersible-type floating support structure carrying a 5-MW offshore wind turbine, are selected for the case studies. Both operational and extreme storm conditions on the US Outer Continental Shelf (OCS) are considered. A state-of-the-art simulation technique is employed to perform fully coupled aero-hydro-servo-elastic analysis using the integrated FOWT model. This technique can take into account dynamic interactions among the turbine Rotor-Nacelle Assembly (RNA), turbine control system, floating support structure and stationkeeping system. The relative importance of various design parameters and their impact on the development of design criteria are evaluated through parametric analyses. The paper also introduces the design requirements put forward in the recently published ABS Guide for Building and Classing Floating Offshore Wind Turbine Installations (ABS, 2013).

Wind/Wave Misalignment Effects on Mooring Line Tensions for a Spar Buoy Wind Turbine

2018 ◽  
Author(s):  
Luigia Riefolo ◽  
Fernando del Jesus ◽  
Raúl Guanche García ◽  
Giuseppe Roberto Tomasicchio ◽  
Daniela Pantusa
Keyword(s):  
Wind Turbine ◽  
Wind Turbines ◽  
Wind Wave ◽  
Offshore Wind ◽  
Mooring Line ◽  
Ultimate Limit State ◽  
International Electrotechnical Commission ◽  
Wave Loads ◽  
Offshore Wind Turbines ◽  
Floating Offshore Wind Turbines

The design methodology for mooring systems for a spar buoy wind turbine considers the influence of extreme events and wind/wave misalignments occurring in its lifetime. Therefore, the variety of wind and wave directions affects over the seakeeping and as a result the evaluation of the maxima loads acting on the spar-buoy wind turbine. In the present paper, the importance of wind/wave misalignments on the dynamic response of spar-type floating wind turbine [1] is investigated. Based on standards, International Electrotechnical Commission IEC and Det Norske Veritas DNV the design of position moorings should be carried out under extreme wind/wave loads, taking into account their misalignments with respect to the structure. In particular, DNV standard, in ‘Position mooring’ recommendations, specifies in the load cases definition, if site specific data is not available, to consider non-collinear environment to have wave towards the unit’s bow (0°) and wind 30° relative to the waves. In IEC standards, the misalignment of the wind and wave directions shall be considered to design offshore wind turbines and calculate the loads acting on the support structure. Ultimate Limit State (ULS) analyses of the OC3-Hywind spar buoy wind turbine are conducted through FAST code, a certified nonlinear aero-hydro-servo-elastic simulation tool by the National Renewable Energy Laboratory’s (NREL’s). This software was developed for use in the International Energy Agency (IEA) Offshore Code Comparison Collaborative (OC3) project, and supports NREL’s offshore 5-MW baseline turbine. In order to assess the effects of misaligned wind and wave, different wind directions are chosen, maintaining the wave loads perpendicular to the structure. Stochastic, full-fields, turbulence simulator Turbsim is used to simulate the 1-h turbulent wind field. The scope of the work is to investigate the effects of wind/wave misalignments on the station-keeping system of spar buoy wind turbine. Results are presented in terms of global maxima determined through mean up-crossing with moving average, which, then, are modelled by a Weibull distribution. Finally, extreme values are estimated depending on global maxima and fitted on Gumbel distribution. The Most Probable Maximum value of mooring line tensions is found to be influenced by the wind/wave misalignments. The present paper is organized as follows. Section ‘Introduction’, based on a literature study, gives useful information on the previous studies conducted on the wind/wave misalignments effects of floating offshore wind turbines. Section ‘Methodology’ describes the applied methodology and presents the spar buoy wind turbine, the used numerical model and the selected environmental conditions. Results and the corresponding discussion are given in Section ‘Results and discussion’ for each load case corresponding to the codirectional and misaligned wind and wave loads. Results are presented and discussed in time and frequency domains. Finally, in Section ‘Conclusion’ some conclusions are drawn.

Using Nonlinear Wave Kinematics to Estimate the Loads on Offshore Wind Turbines in 3-Hour Sea States

2018 ◽  
Author(s):  
Tim Bunnik ◽  
Erik-Jan de Ridder
Keyword(s):  
Wind Turbine ◽  
Nonlinear Wave ◽  
Wind Turbines ◽  
Wave Model ◽  
Breaking Waves ◽  
Model Tests ◽  
Offshore Wind ◽  
Wave Loads ◽  
Offshore Wind Turbines ◽  
Wave Basin

The effects of operational wave loads and wind loads on offshore mono pile wind turbines are well understood. For most sites, however, the water depth is such that breaking or near-breaking waves will occur causing impulsive excitation of the mono pile and consequently considerable stresses, displacements and accelerations in the monopile, tower and turbine. As has been shown in earlier, recent publications, Computational Fluid Dynamics (CFD) can be used to accurately analyze wave impacts on offshore wind turbines. However, it is not yet well suited to study the statistical variability of wave impact loads in long-duration sea states, and thus estimate the ULS and ALS loads for which a wind turbine has to be designed. An alternative, simplified approach, is the use of a Morison model in which the kinematics (water particle velocities and accelerations) from a nonlinear wave model are used. For long-crested waves the nonlinear wave model can be run in a 2D mode and is therefore relatively cheap. In this paper model tests for steep and breaking waves on an offshore wind turbine are compared with results from the Morison model. First, a deterministic comparison is made between the wave loads from the model tests and the simulation model (simulating the same 3-hour wave realization as in the basin), which turns out to be difficult because of differences between wave reflections in the wave basin (a physical beach) and the numerical wave model (absorbing boundary condition). Second, a statistical comparison is made by comparing with different wave realizations measured in the wave basin.

scholarly journals On the Modeling of Spar-Type Floating Offshore Wind Turbines

2013 ◽  
Vol 569-570 ◽  
pp. 636-643 ◽  
Author(s):  
Van Nguyen Dinh ◽  
Biswajit Basu
Keyword(s):  
Wind Turbines ◽  
Operating Conditions ◽  
Offshore Wind ◽  
Wave Loads ◽  
Dynamic Coupling ◽  
Modeling Tools ◽  
Modeling And Analysis ◽  
Offshore Wind Turbines ◽  
Floating Offshore Wind Turbines ◽  
Floating Platforms

In this paper an overview about floating offshore wind turbines (FOWT) including operating conditions, property and applicability of the barge, tension-leg, and spar floating platforms is described. The spar-floating offshore wind turbines (S-FOWT) have advantages in deepwater and their preliminary design, numerical modeling tools and integrated modeling are reviewed. Important conclusions about the nacelle and blade motions, tower response, effects of wind and wave loads, overall vibration and power production of the S-FOWT are summarized. Computationally-simplified models with acceptable accuracy are necessary for feasibility and pre-engineering studies of the FOWT. The design needs modeling and analysis of aero-hydro-servo dynamic coupling of the entire FOWT. This paper also familiarizes authors with FOWT and its configurations and modeling approaches.

Interaction of Load Analysis and Structural Design of Offshore Wind Turbines

2006 ◽  
Author(s):  
Kimon Argyriadis ◽  
Marcus Klose
Keyword(s):  
Wind Turbines ◽  
Offshore Wind ◽  
Soil Conditions ◽  
Wave Loads ◽  
Support Structure ◽  
Additional Element ◽  
Ambient Temperatures ◽  
Offshore Wind Turbines ◽  
Design Loads ◽  
Load Analysis

The paper presents the necessary considerations for the determination of design loads for offshore wind turbines (OWTs) and OWT support structures. The design of OWTs strongly depends on the environmental conditions such as wind and wave data, ambient temperatures and soil conditions. Load analyses for OWTs are generally done using sophisticated simulation tools which consider the turbulent wind conditions as well as the structural dynamics and the operational behavior of the turbine. Compared to wind turbines onshore, wave loads are an additional element that needs to be considered. Experience shows that the natural frequencies of the support structure highly influence the design loads on the system due to excitation by the rotor. Therefore, the load analysis in combination with optimization of the support structure is an iterative process. A close cooperation between the designing engineers of turbine and support structure is definitely required. The calculation procedure will be presented as well as results from a sample calculation for a typical configuration.

Sign in / Sign up

Export Citation Format

Share Document