Research on Nano-Emulsion Relieving Coal Seam Water Block Damage

2021 ◽  
Author(s):  
Wei Sun ◽  
LongHao Zhao ◽  
Qian Wang ◽  
Yanchi Liu ◽  
Weiping Zhu ◽  
...  
Keyword(s):  
Coal Seam ◽  
Coalbed Methane ◽  
Mixed Micelles ◽  
Polymer Adsorption ◽  
Coal Seams ◽  
Fracturing Fluid ◽  
Flow Experiment ◽  
Nano Emulsion ◽  
Water Block ◽  
Lock In

Abstract Hydraulic fracturing is the most effective reservoirstimulation techniques in the coalbed methane. However, the polymer in the fracturing fluid has a strong effect on the surface of the coal, causing the water lock damage as high as 70% to 90%. It is important to develop an efficient method for releasing coal seam water lock. In this paper, adsorption experiment, SEM, particle size experiment, core flow experiment, wettability and surface tension experiment are used to study the cause of coal seam water lock damage during fracturing and the effect of nano-emulsion on releasing water lock damage in coal seams. Experimental results show that after coal fracturing, the adsorption amount of polymer on the surface of coal is 14.81 mg/g. The large amount of hydrophilic polymer adsorption causes the pore radius of the coal to narrow. And the surface wettability changes from weak hydrophilic to strong hydrophilic, which increase the water lock damage. Compared with conventional slick water, fracturing fluid, the composite of nano-emulsion and fracturing fluid forms mixed micelles, which reduces the polymer adsorption capacity from 14.81 mg/g to 7.42 mg/g. After scanning by electron microscope, it is observed that the surface roughness of the rock sample is restored; The size of the nano-emulsion is about 10nm, and the very small volume can act deep in the pores of the coal seam; After using nano-emulsion, the gas/water interfacial tension is reduced by 45.1mN/m, and the wettability of coal is improved from hydrophilic to neutral, which reduces the capillary pressure in the pores of the coal and reduces the breakthrough pressure of coalbed methane by 11.1KPa; The water lock release rate is as high as 53.09%. The Nano-emulsion is an ideal choice to remove water lock damage.

scholarly journals The Role of Coal Mechanical Characteristics on Reservoir Permeability Evolution and Its Effects on CO2 Sequestration and Enhanced Coalbed Methane Recovery

Geofluids ◽  
2020 ◽  
Vol 2020 ◽  
pp. 1-28
Author(s):  
Hao Han ◽  
Shun Liang ◽  
Yaowu Liang ◽  
Xuehai Fu ◽  
Junqiang Kang ◽  
...  
Keyword(s):  
Elastic Modulus ◽  
Coal Seam ◽  
Coalbed Methane ◽  
Co2 Sequestration ◽  
Mechanical Characteristics ◽  
Co2 Adsorption ◽  
Co2 Injection ◽  
Permeability Change ◽  
Coal Seams ◽  
Enhanced Coalbed Methane

Elastic modulus is an important parameter affecting the permeability change in the process of coalbed methane (CBM)/enhanced coalbed methane (ECBM) production, which will change with the variable gas content. Much research focuses on the constant value of elastic modulus; however, variable stiffness of coal during CO2 injection has been considered in this work. The coupled thermo-hydro-mechanical (THM) model is established and then validated by primary production data, as well as being applied in the prediction of CO2/N2-ECBM recovery. The results show that the harder coal seam is beneficial to primary production, while the softer coal seam results in greater CO2/N2-ECBM recovery and CO2 sequestration. N2 and CO2 mixture injection could be applied to balance early N2 breakthrough and pronounced matrix swelling induced by CO2 adsorption, and to prolong the process of effective CH4 recovery. Besides, reduction in stiffness of coal seam during CO2 injection would moderate the significant permeability loss induced by matrix swelling. With the increase of the weakening degree of coal seam stiffness, CO2 cumulative storage also shows an increasing trend. Neglecting the weakening effect of CO2 adsorption on coal seam stiffness could underestimate the injection capacity of CO2. Injection of hot CO2 could improve the permeability around injection well and then enhance CO2 cumulative storage and CBM recovery. Furthermore, compared with ECBM production, injection temperature is more favorable for CO2 storage, especially within hard coal seams. Care should be considered that significant permeability change is induced by mechanical characteristics alterations in deep burial coal seams in further study, especially for CO2-ECBM projects.

COAL SEAM GAS—PETROLEUM OR MINERAL

1997 ◽  
Vol 37 (1) ◽  
pp. 589
Author(s):  
D.J. Gately
Keyword(s):  
Private Sector ◽  
Coal Seam ◽  
Coalbed Methane ◽  
Resource Development ◽  
Coal Seams ◽  
Coal Seam Gas ◽  
Commercial Use ◽  
Private Sector Investment ◽  
History Of ◽  
Policy Shift

1996 was a watershed year for gas exploration in Queensland: the increasing private sector investment in the search for and commercial use of methane gas from coal seams received legislative endorsement. Coal seam gas (CSG), also known as coalbed methane or CBM, was officially designated as petroleum, with exploration for and production of CSG to be administered under the Petroleum Act.The paper traces the history of exploration for CSG in Queensland since 1976, culminating in a policy shift in 1996. In Queensland there is now potential for overlapping titles and competitive resource development.

scholarly journals Investigation on the CBM Extraction Techniques in the Broken-Soft and Low-Permeability Coal Seams in Zhaozhuang Coalmine

Geofluids ◽  
2021 ◽  
Vol 2021 ◽  
pp. 1-9
Author(s):  
Zhaoying Chen ◽  
Xuehai Fu ◽  
Guofu Li ◽  
Jian Shen ◽  
Qingling Tian ◽  
...  
Keyword(s):  
Coal Seam ◽  
Hydraulic Fracturing ◽  
Coalbed Methane ◽  
Research Result ◽  
Horizontal Stress ◽  
Gas Production ◽  
Vertical Stress ◽  
Low Permeability ◽  
Coal Seams

To enhance the coalbed methane (CBM) extraction in broken-soft coal seams, a method of drilling a horizontal well along the roof to hydraulically fracture the coal seam is studied (i.e., HWR-HFC method). We first tested the physical and mechanical properties of the broken-soft and low-permeability (BSLP) coal resourced from Zhaozhuang coalmine. Afterward, the in situ hydraulic fracturing test was conducted in the No. 3 coal seam of Zhaozhuang coalmine. The results show that (1) the top part of the coal seam is fractured coal, and the bottom is fragmented-mylonitic coal with a firmness coefficient value of less than 1.0. (2) In the hydraulic fracturing test of the layered rock-coal specimens in laboratory, the through-type vertical fractures are usually formed if the applied vertical stress is the maximum principal stress and is greater than 4 MPa compared with the maximum horizontal stress. However, horizontal fractures always developed when horizontal stress is the maximum or it is less than 4 MPa compared with vertical stress. (3) The in situ HWR-HFC hydraulic fracturing tests show that the detected maximum daily gas production is 11,000 m3, and the average gas production is about 7000 m3 per day. This implies that the CBM extraction using this method is increased by 50%~100% compared with traditional hydraulic fracturing in BSLP coal seams. The research result could give an indication of CBM developing in the broken-soft and low-permeability coal seams.

scholarly journals Numerical Simulation Research on Well Pattern Optimization in High–Dip Angle Coal Seams: A Case of Baiyanghe Block

2021 ◽  
Vol 9 ◽  
Author(s):  
Hongli Wang ◽  
Xiao Zhang ◽  
Suian Zhang ◽  
Hongxing Huang ◽  
Jun Wang
Keyword(s):  
Coal Seam ◽  
Coalbed Methane ◽  
Horizontal Well ◽  
Gas Production ◽  
Low Rank ◽  
Water Migration ◽  
Coal Seams ◽  
Well Pattern ◽  
Dip Angle ◽  
Desorption Model

The Baiyanghe block in Fukang, Xinjiang, China, is rich in coalbed methane (CBM) resources, and several pilot experimental wells have yielded high production. Due to the high dip angle (35–55°) of the coal seam in this area, the lack of understanding of the geological characteristics, the physical properties of coal, and gas–water migration law lead to immature development techniques and poor overall development benefits. We first conducted desorption and adsorption tests on low-rank coal of this area and found residual gas in the coal. We established a coalbed methane desorption model suitable for this area by modifying the isotherm adsorption model. Next, by analyzing the influence of the gas–water gravity differentiation in the high–dip angle coal seam and the shallow fired coalbed methane characteristics in this area, we discovered the leakage of CBM from the shallow exposed area of the coal seam. Given the particular physical property of coal and gas–water migration characteristics in this area, we optimized the well pattern: (i) the U-shaped along-dip horizontal well group in coal seams is the main production well for gas production with a spacing distance of 312 m; (ii) a multistage fracturing well drilled in the floor of coal is for water production; and (iii) vertical wells with a spacing distance of 156 m in the shallow area is to capture CBM leakage. Using numerical simulation and net present value (NPV) economics models, we optimized the well pattern details. Applying our CBM desorption model, the numerical simulator can improve the accuracy of the low-rank coalbed methane productivity forecast. The optimization results demonstrated the following: 1) the cumulative gas production of single U-shaped well increased by 89% with the optimal well spacing, 2) the cumulative gas production of the well group increased by 87.54% after adding the floor staged horizontal well, and 3) the amount of CBM leakage decrease by 67.59%.

Geological Characteristics of Coalbed Methane Reservoir in Southern Shizhuang Block, Southeastern Qinshui Basin

2013 ◽  
Vol 295-298 ◽  
pp. 3209-3212
Author(s):  
Li Ren Xing ◽  
Yan Bin Yao ◽  
Da Meng Liu ◽  
Jun Gang Liu ◽  
Lu Lu Zhou ◽  
...  
Keyword(s):  
Coal Seam ◽  
Local Structure ◽  
Coalbed Methane ◽  
Simple Structure ◽  
Gas Content ◽  
Burial Depth ◽  
Coal Seams ◽  
Structure Characteristics ◽  
Geological Characteristics ◽  
Coalbed Methane Reservoir

Southern Shizhuang Block has simple structure characteristics, relatively thick coal seams (3.1-10.5 m, 6 m in average), and favorable burial depth (450-900 m). The gas content of the No.3 coal seam in the Shanxi formation ranges from 6-20 m3/t, and it increases from the southeast to northwest area in the southern Shizhuang Block. Gas content is high in the structural low in the area, which means the gas accumulation is controlled by the geological characteristics of local structure and hydrogeologic conditions.

Study on Evaluation System for Coalbed Methane from Deep Coal Seams in China

2014 ◽  
Vol 962-965 ◽  
pp. 83-87
Author(s):  
Gui Qiang Zheng ◽  
Biao Can Ling ◽  
Xue Zheng Zhu
Keyword(s):  
Coal Seam ◽  
Coalbed Methane ◽  
Evaluation System ◽  
Target Selection ◽  
Study Data ◽  
Technical Support ◽  
Coal Seams ◽  
Reservoir Properties ◽  
Evaluation Standard ◽  
Study Results

In this study, data from 244 CBM production wells were collected and analyzed in China. Based on the data, coalbed methane (CBM) reservoir properties and geological factors were studied. Combined with previous study results, the current situation of CBM resource evaluation, the classification of evaluation indexes and evaluation standard were analyzed. Finally, the evaluation system aiming at deep coal seam CBM was suggested. This system tries to provide important theoretical and technical support to CBM exploration and geological target selection evaluation for deep coal seams in China. This will provide important guideline and technical support to CBM exploration and geological target selection evaluation in deep coal seam CBM in China.

scholarly journals Cooperative Control Mechanism of Long Flexible Bolts and Blasting Pressure Relief in Hard Roof Roadways of Extra-Thick Coal Seams: A Case Study

2021 ◽  
Vol 11 (9) ◽  
pp. 4125
Author(s):  
Zhe Xiang ◽  
Nong Zhang ◽  
Zhengzheng Xie ◽  
Feng Guo ◽  
Chenghao Zhang
Keyword(s):  
Coal Seam ◽  
Cooperative Control ◽  
Field Tests ◽  
Surrounding Rock ◽  
Deep Hole ◽  
Coal Seams ◽  
Thick Coal Seam ◽  
Structure Damage ◽  
Hard Roof

The higher strength of a hard roof leads to higher coal pressure during coal mining, especially under extra-thick coal seam conditions. This study addresses the hard roof control problem for extra-thick coal seams using the air return roadway 4106 (AR 4106) of the Wenjiapo Coal Mine as a case study. A new surrounding rock control strategy is proposed, which mainly includes 44 m deep-hole pre-splitting blasting for stress releasing and flexible 4-m-long bolt for roof supporting. Based on the new support scheme, field tests were performed. The results show that roadway support failure in traditional scenarios is caused by insufficient bolt length and extensive rotary subsidence of the long cantilever beam of the hard roof. In the new proposed scheme, flexible 4-m-long bolts are shown to effectively restrain the initial expansion deformation of the top coal. The deflection of the rock beam anchored by the roof foundation are improved. Deep-hole pre-splitting blasting effectively reduces the cantilever distance of the “block B” of the voussoir beam structure. The stress environment of the roadway surrounding rock is optimized and anchorage structure damage is inhibited. The results provide insights regarding the safe control of roadway roofs under extra-thick coal seam conditions.

scholarly journals Comprehensive technical support for safe mining in ultra-close coal seams: A case study

2021 ◽  
pp. 014459872110093
Author(s):  
Wei Zhang ◽  
Jiawei Guo ◽  
Kaidi Xie ◽  
Jinming Wang ◽  
Liang Chen ◽  
...  
Keyword(s):  
Coal Seam ◽  
Technical Support ◽  
Surrounding Rock ◽  
Coal Seams ◽  
Deformation Control ◽  
Hard Roof ◽  
Working Face ◽  
Close Coal Seams ◽  
Safe Mining

In order to mine the coal seam under super-thick hard roof, improve the utilization rate of resources and prolong the remaining service life of the mine, a case study of the Gaozhuang Coal Mine in the Zaozhuang Mining Area has been performed in this paper. Based on the specific mining geological conditions of ultra-close coal seams (#3up and #3low coal seams), their joint systematic analysis has been performed, with the focus made in the following three aspects: (i) prevention of rock burst under super-thick hard roof, (ii) deformation control of surrounding rock of roadways in the lower coal seam, and (iii) fire prevention in the goaf of working face. Given the strong bursting tendency observed in upper coal seam and lower coal seam, the technology of preventing rock burst under super-thick hard roof was proposed, which involved setting of narrow section coal pillars to protect roadways and interleaving layout of working faces. The specific supporting scheme of surrounding rock of roadways in the #3low1101 working face was determined, and the grouting reinforcement method of local fractured zones through Marithan was further proposed, to ensure the deformation control of surrounding rock of roadways in lower coal seams. The proposed fire prevention technology envisaged goaf grouting and spraying to plug leaks, which reduced the hazard of spontaneous combustion of residual coals in mined ultra-close coal seams. The technical and economic improvements with a direct economic benefit of 5.55 million yuan were achieved by the application of the proposed comprehensive technical support. The research results obtained provide a theoretical guidance and technical support of safe mining strategies of close coal seams in other mining areas.

scholarly journals Quantify Coal Macrolithotypes of a Whole Coal Seam: A Method Combing Multiple Geophysical Logging and Principal Component Analysis

Energies ◽  
2021 ◽  
Vol 14 (1) ◽  
pp. 213
Author(s):  
Chao Cui ◽  
Suoliang Chang ◽  
Yanbin Yao ◽  
Lutong Cao
Keyword(s):  
Principal Component Analysis ◽  
Coal Seam ◽  
Coalbed Methane ◽  
Principal Component ◽  
Component Analysis ◽  
Gas Production ◽  
Index Model ◽  
Geophysical Logging ◽  
The Relationship ◽  
Observation Results

Coal macrolithotypes control the reservoir heterogeneity, which plays a significant role in the exploration and development of coalbed methane. Traditional methods for coal macrolithotype evaluation often rely on core observation, but these techniques are non-economical and insufficient. The geophysical logging data are easily available for coalbed methane exploration; thus, it is necessary to find a relationship between core observation results and wireline logging data, and then to provide a new method to quantify coal macrolithotypes of a whole coal seam. In this study, we propose a L-Index model by combing the multiple geophysical logging data with principal component analysis, and we use the L-Index model to quantitatively evaluate the vertical and regional distributions of the macrolithotypes of No. 3 coal seam in Zhengzhuang field, southern Qinshui basin. Moreover, we also proposed a S-Index model to quantitatively evaluate the general brightness of a whole coal seam: the increase of the S-Index from 1 to 3.7, indicates decreasing brightness, i.e., from bright coal to dull coal. Finally, we discussed the relationship between S-Index and the hydro-fracturing effect. It was found that the coal seam with low S-Index values can easily form long extending fractures during hydraulic fracturing. Therefore, the lower S-Index values indicate much more favorable gas production potential in the Zhengzhuang field. This study provides a new methodology to evaluate coal macrolithotypes by using geophysical logging data.

Sign in / Sign up

Export Citation Format

Share Document