Analysis and Experiment on the Effect of Seismic Protection of Buildings by High Damping Rubber Bearings

2004 ◽  
Author(s):  
Jun-Ping Pu ◽  
C. S. Tsai ◽  
Jian-Fa Huang ◽  
Bo-Jen Chen ◽  
Yao-Min Fang
Keyword(s):  
Earthquake Engineering ◽  
Base Isolation ◽  
Steel Structure ◽  
Shaking Table ◽  
Natural Period ◽  
Rubber Bearing ◽  
High Damping Rubber Bearings ◽  
High Damping Rubber Bearing ◽  
High Damping Rubber ◽  
Rubber Bearings

In recent years, many studies on base isolation strategies and devices have been developed and applied in U. S. A., Europe, Japan, and New Zealand. The high damping rubber bearing belongs to one kind of the earthquake-proof ideas of base isolation technologies. The installation of high damping rubber bearings can lengthen the natural period of a building and simultaneously reduce the earthquake-induced energy trying to impart to the building. The objective of this paper is to investigate the base isolation effect of high damping rubber bearings. The uniaxial, biaxial, and triaxial shaking table tests were performed to study the seismic behavior of a 0.4-scale three-story isolated steel structure in the National Center for Research on Earthquake Engineering in Taiwan. The experimental and analytical results show that the nonlinear mechanical characteristics of the high damping rubber bearings can be reasonably simulated.

Shaking Table Tests of Full Scale Base-Isolated Structures

2002 ◽  
Author(s):  
C. S. Tsai ◽  
B. J. Chen ◽  
T. C. Chiang
Keyword(s):  
Structural Control ◽  
Control Strategies ◽  
Steel Structure ◽  
Seismic Energy ◽  
Full Scale ◽  
Shaking Table ◽  
Shaking Table Tests ◽  
Natural Period ◽  
Rubber Bearing ◽  
Rubber Bearings

Conventional earthquake resistant designs depend on strengthen and ductility of the structural components to resist induced forces and to dissipate seismic energy. However, this can produce permanent damage to the joints as well as the larger interstory displacements. In recently years, many studies on structural control strategies and devices have been developed and applied in U. S. A., Europe, Japan, and New Zealand. The rubber bearing belongs to one kind of the earthquake-proof ideas of structural control technologies. The installation of rubber bearings can lengthen the natural period of a building and simultaneously reduce the earthquake-induced energy trying to impart to the building. They can reduce the magnitude of the earthquake-induced forces and consequently reduce damage to the structures and its contents, and reduce danger to its occupants. This paper is aimed at studying the mechanical behavior of the stirrup rubber bearings (SRB) and evaluating the feasibility of the buildings equipped with the stirrup rubber bearings. Furthermore, uniaxial, biaxial, and triaxial shaking table tests are conducted to study the seismic response of a full-scale three-story isolated steel structure. Experimental results indicate that the stirrup rubber bearings possess higher damping ratios at higher strains, and that the stirrup rubber bearings provide good protection for structures. It has been proved through the full-scale tests on shaking table that the stirrup rubber bearing is a very promising tool to enhance the seismic resistibility of structures.

Experimental Study of a Multiple Bay Structure Isolated With Hybrid Bearings

2003 ◽  
Author(s):  
C. S. Tsai ◽  
Bo-Jen Chen ◽  
Tsu-Cheng Chiang ◽  
Guan-Hsing Lee
Keyword(s):  
Earthquake Engineering ◽  
Base Isolation ◽  
Steel Structure ◽  
Seismic Energy ◽  
Shaking Table ◽  
Element Formulation ◽  
Shaking Table Tests ◽  
Seismic Responses ◽  
Promising Tool ◽  
Rubber Bearings

In conventional earthquake resistance design approach (the ductility-design philosophy), the energy dissipation mechanism is based on plastic deformations at scattered locations in the structure. However, this can produce permanent damage to the joints as well as the larger interstory displacements. In recently years, the base isolation technology has been adopted as a feasible and attractive way in improving seismic resistance of structures. It can shift the natural periods of structures away from the rich periods contents of earthquake motions, but also provide considerable supplemental damping to dissipate seismic energy transmitted into structures during earthquakes. In this paper, uniaxial, biaxial, and triaxial shaking table tests are performed to study the seismic behavior of a 0.4-scale three-story isolated steel structure in the National Center for Research on Earthquake Engineering in Taiwan. Experimental results demonstrate that structures with hybrid rubber bearings can actually decrease the seismic responses of the superstructure. It has been proved through the shaking table tests that the rubber bearing is a very promising tool to enhance the seismic resistibility of structures. Moreover, it is illustrated that the proposed analytical model and finite element formulation in this paper can well predict the mechanical behavior of rubber bearings and seismic responses of the base-isolated structures.

scholarly journals Pengaruh Penggunaan Base Isolation High Damping Rubber Bearing Pada Struktur Beton Bertulang

2020 ◽  
Vol 6 (2) ◽  
pp. 181-194
Author(s):  
Syahnandito ◽  
Reni Suryanita ◽  
Ridwan
Keyword(s):  
Base Isolation ◽  
Isolation System ◽  
Rubber Bearing ◽  
High Damping Rubber Bearing ◽  
Base Isolator ◽  
Base Isolation System ◽  
High Damping Rubber

Salah satu cara yang dapat dilakukan adalah menggunakan peredam beban gempa dengan sistem isolasi dasar (base isolation system). Penggunaan base isolation system  pada bangunan dapat mengisolasi perambatan getaran akibat gempa dari tanah ke struktur atas bangunan menggunakan komponen berbahan karet. Tujuan penelitian ini adalah untuk menganalisis pengaruh penggunaan sistem isolasi dasar berupa High Damping Rubber Bearing pada periode dan gaya geser dasar  struktur beton bertulang. Objek penelitian adalah bangunan hotel 15 lantai dengan ketinggian 62,9 m. Penelitian diawali dengan pemodelan struktur menggunakan aplikasi ETABS v2016 sehingga didapatkan periode dan gaya geser dasar struktur fixbase. Tahap selanjutnya memberikan gaya pada model struktur dengan isolasi dasar High Dumper Rubber Bearing sehingga didapatkan periode dan gaya geser dasar struktur dengan base isolator. Hasil analisis pada struktur fixbase didapatkan periode sebesar 4,212 detik, dengan gaya geser dasar didapatkan sebesar 1470,725 ton. Sedangkan hasil analisis pada struktur dengan base isolator didapatkan periode sebesar 5,500 detik, dengan gaya geser dasar didapatkan sebesar 1286,071 ton. Maka dapat disimpulkan bahwa pada struktur dengan base isolator terjadi peningkatan periode sebesar 30,58 %, sedangkan gaya geser dasar terjadi penurunan 12,56 %.

Seismic Analysis and Comparison of Different Base Isolation Systems for a Multi-Storey RC Building with Irregularities in Plan

2012 ◽  
Vol 594-597 ◽  
pp. 1788-1799 ◽  
Author(s):  
Donato Cancellara ◽  
Fabio de Angelis
Keyword(s):  
Base Isolation ◽  
Seismic Analysis ◽  
Cyclic Behavior ◽  
Isolation System ◽  
High Damping Rubber Bearings ◽  
Fixed Base ◽  
Base Isolation System ◽  
High Damping Rubber ◽  
Isolation Systems ◽  
Rubber Bearings

In the present paper the dynamic nonlinear analysis for a 3D base isolated structure is illustrated. A base isolated reinforced concrete building is designed and verified according to the European seismic codes such that the superstructure remains almost completely elastic and the nonlinear elements are localized only in the base isolation system. Nonlinear hysteretic models have been adopted to reproduce the cyclic behavior of the isolators. Two different base isolation systems are considered and their performances are compared for evaluating the behaviour of a base isolated building, highly irregular in plan, in presence of a seismic excitation defined with recorded accelerograms which characterize the bi-directional ground motions. The isolation system has been realized with a combination in parallel of elastomeric bearings and sliding devices. In the first analyzed isolation system we have used the High Damping Rubber Bearings (HDRB) and in the second analyzed isolation system we have used the Lead Rubber Bearings (LRB). Finally a comparative analysis between the base isolated structure with hybrid base isolation systems and the conventional fixed base structure is detailed.

Seismic base isolation of precast wall system using high damping rubber bearing

2014 ◽  
Vol 7 (6) ◽  
pp. 1141-1169
Author(s):  
Patrick L.Y. Tiong ◽  
Azlan Adnan ◽  
Ahmad B.A. Rahman ◽  
Abdul K. Mirasa
Keyword(s):  
Base Isolation ◽  
Rubber Bearing ◽  
High Damping Rubber Bearing ◽  
High Damping Rubber ◽  
Seismic Base Isolation ◽  
Wall System

Seismical Protection Properties of High Damping Rubber Bearing and Lead Rubber Bearing Base Isolation Systems for Multi-Storey RC Buildings

2012 ◽  
Vol 234 ◽  
pp. 90-95 ◽  
Author(s):  
Donato Cancellara ◽  
Fabio de Angelis
Keyword(s):  
Base Isolation ◽  
Response Spectrum ◽  
Limit State ◽  
Three Dimensional ◽  
Elastic Response ◽  
Rubber Bearing ◽  
Lead Rubber Bearing ◽  
High Damping Rubber Bearing ◽  
High Damping Rubber ◽  
Isolation Systems

In the present paper two different base isolation systems, designed and verified according to the european seismic code (EC2 and EC8), are compared for evaluating the behaviour of a base isolated building, highly irregular in plan, in presence of a seismic excitation. The devices adopted for realizing the different base isolation systems are the High Damping Rubber Bearing (HDRB) and the Lead Rubber Bearing (LRB) both of them actuated in parallel with a Friction Slider (FS). A dynamic nonlinear analysis for a three-dimensional base isolated structure has been performed. Recorded accelerograms for bi-directional ground motions, compatible with the reference elastic response spectrum for each limit state have been used for a more realistic evaluation of the seismic response of the structure and a more realistic comparative analysis between the base isolated structure with the different considered base isolation systems and the traditional fixed base structure.

scholarly journals An Experimental Study on the Mechanical Properties of a High Damping Rubber Bearing with Low Shape Factor

2021 ◽  
Vol 11 (21) ◽  
pp. 10059
Author(s):  
Zhenyuan Gu ◽  
Yahui Lei ◽  
Wangping Qian ◽  
Ziru Xiang ◽  
Fangzheng Hao ◽  
...  
Keyword(s):  
Experimental Data ◽  
Energy Dissipation ◽  
Shape Factor ◽  
Vertical Stiffness ◽  
Rubber Bearing ◽  
High Damping Rubber Bearing ◽  
Lead Rubber Bearings ◽  
Good Energy ◽  
High Damping Rubber ◽  
Rubber Bearings

A high damping rubber bearing (HDRB) is widely utilized in base-isolation structures due to its good energy dissipation capacity and environmentally friendly properties; however, it is incapable of isolating the vertical vibration caused by earthquakes and subways effectively. Thick rubber bearings with a low shape factor have become one of the important vertical isolation forms. This paper provides an experimental comparative study on high damping rubber bearings with low shape factor (HDRB-LSF), thick lead–rubber bearings (TLRB), and lead–rubber bearings (LRB). The abilities of the bearing and energy dissipation of the above bearings are analyzed contrastively considering the influence of vertical pressure, loading frequency, shear strain, and pre-pressure. Firstly, the HDRB-LSF, TLRB, and LRB are designed according to the Chinese Code for seismic design of buildings. Secondly, cyclic vertical compression tests and horizontal shear tests, as well as their correlation tests, are conducted, respectively. The vibrational characteristics and hysteresis feature of these three bearings are critically compared. Thirdly, a corrected calculation of vertical stiffness for the thick rubber bearings is proposed based on the experimental data to provide a more accurate and realistic tool measuring the vertical mechanical properties of rubber bearings. The test results proved that the HDRB-LSF has the most advanced performance of the three bearings. For the fatigue property, the hysteresis curves of the HDRB-LSF along with TLRB are plump both horizontally and vertically, thus providing a good energy dissipation effect. Regarding vertical stiffness, results from different loading cases show that the designed HDRB-LSF possesses a better vertical isolation effect and preferable environmental protection than LRB, a larger bearing capacity, and, similarly, a more environmentally friendly property than TLRB. Hence, it can avoid the unfavorable resonance effect caused by vertical periodic coupling within the structure. All the experimental data find that the proposed corrected equation can calculate the vertical stiffness of bearings with a higher accuracy. This paper presents the results of an analytical, parametric study that aimed to further explore the low shape factor concepts of rubber bearings applied in three-dimensional isolation for building structures.

Sign in / Sign up

Export Citation Format

Share Document