Preliminary Investigation of a Fishbone Active Camber Concept

2012 ◽  
Author(s):  
Benjamin King Sutton Woods ◽  
Michael I. Friswell
Keyword(s):  
Preliminary Investigation ◽  
Leading Edge ◽  
Skin Surface ◽  
Biologically Inspired ◽  
Trailing Edge ◽  
Compliant Structure ◽  
Elastomeric Matrix ◽  
Aerodynamic Properties ◽  
Morphing Structure ◽  
Naca 0012

This paper introduces a novel airfoil morphing structure known as the Fishbone Active Camber (FishBAC). This design employs a biologically inspired compliant structure to create large, continuous changes in airfoil camber and section aerodynamic properties. The structure consists of a thin chordwise bending beam spine with stringers branching off to connect it to a pre-tensioned Elastomeric Matrix Composite (EMC) skin surface. Actuators mounted in the D-spar induce bending moments on the spine through an antagonistic pair of tendons in a manner similar to natural musculature systems. Several potential morphing configurations using this concept are introduced. The paper then focuses on a trailing edge morph wherein the compliant spine connects a rigid leading edge D-spar to a solid trailing edge strip. The motivation for exploring this novel morphing architecture is established through analytical aerodynamic comparison to the NACA 0012 airfoil with and without a discrete trailing edge flap. A prototype device is built to explore various aspects of manufacturing this concept, and to prove the large deflection capability of the FishBAC.

scholarly journals Beyond analogy: A model of bioinspiration for creative design

2016 ◽  
Vol 30 (2) ◽  
pp. 159-170 ◽  
Author(s):  
Camila Freitas Salgueiredo ◽  
Armand Hatchuel
Keyword(s):  
Design Process ◽  
Design Theory ◽  
Leading Edge ◽  
Knowledge Bases ◽  
Biologically Inspired ◽  
Concept Knowledge ◽  
Bioinspired Design ◽  
Aerodynamic Properties ◽  
Biologically Inspired Design ◽  
The Impact

AbstractIs biologically inspired design only an analogical transfer from biology to engineering? Actually, nature does not always bring “hands-on” solutions that can be analogically applied in classic engineering. Then, what are the different operations that are involved in the bioinspiration process and what are the conditions allowing this process to produce a bioinspired design? In this paper, we model the whole design process in which bioinspiration is only one element. To build this model, we use a general design theory, concept–knowledge theory, because it allows one to capture analogy as well as all other knowledge changes that lead to the design of a bioinspired solution. We ground this model on well-described examples of biologically inspired designs available in the scientific literature. These examples include Flectofin®, a hingeless flapping mechanism conceived for façade shading, and WhalePower technology, the introduction of bumps on the leading edge of airfoils to improve aerodynamic properties. Our modeling disentangles the analogical aspects of the biologically inspired design process, and highlights the expansions occurring in both knowledge bases, scientific (nonbiological) and biological, as well as the impact of these expansions in the generation of new concepts (concept partitioning). This model also shows that bioinspired design requires a special form of collaboration between engineers and biologists. Contrasting with the classic one-way transfer between biology and engineering that is assumed in the literature, the concept–knowledge framework shows that these collaborations must be “mutually inspirational” because both biological and engineering knowledge expansions are needed to reach a novel solution.

scholarly journals Features of owl wings that promote silent flight

2017 ◽  
Vol 7 (1) ◽  
pp. 20160078 ◽  
Author(s):  
Hermann Wagner ◽  
Matthias Weger ◽  
Michael Klaas ◽  
Wolfgang Schröder
Keyword(s):  
Noise Reduction ◽  
Leading Edge ◽  
Aerodynamic Performance ◽  
Wing Loading ◽  
Trailing Edge ◽  
Future Directions ◽  
Trailing Edge Noise ◽  
Aerodynamic Properties ◽  
Morphological Adaptations ◽  
Noise Production

Owls are an order of birds of prey that are known for the development of a silent flight. We review here the morphological adaptations of owls leading to silent flight and discuss also aerodynamic properties of owl wings. We start with early observations (until 2005), and then turn to recent advances. The large wings of these birds, resulting in low wing loading and a low aspect ratio, contribute to noise reduction by allowing slow flight. The serrations on the leading edge of the wing and the velvet-like surface have an effect on noise reduction and also lead to an improvement of aerodynamic performance. The fringes at the inner feather vanes reduce noise by gliding into the grooves at the lower wing surface that are formed by barb shafts. The fringed trailing edge of the wing has been shown to reduce trailing edge noise. These adaptations to silent flight have been an inspiration for biologists and engineers for the development of devices with reduced noise production. Today several biomimetic applications such as a serrated pantograph or a fringed ventilator are available. Finally, we discuss unresolved questions and possible future directions.

Aeroelastic Control of Long-Span Suspension Bridges

2011 ◽  
Vol 78 (4) ◽  
Author(s):  
J. Michael R. Graham ◽  
David J. N. Limebeer ◽  
Xiaowei Zhao
Keyword(s):  
Control System ◽  
Model Building ◽  
Leading Edge ◽  
Suspension Bridges ◽  
Trailing Edge ◽  
Loop Control ◽  
Wind Speeds ◽  
Long Span ◽  
Aerodynamic Properties ◽  
Trailing Edge Flaps

The modeling, control, and dynamic stabilization of long-span suspension bridges are considered. By employing leading- and trailing-edge flaps in combination, we show that the critical wind speeds for flutter and torsional divergence can be increased significantly. The relatively less well known aerodynamic properties of leading-edge flaps will be studied in detail prior to their utilization in aeroelastic stability and control system design studies. The optimal approximation of the classical Theodorsen circulation function will be studied as part of the bridge section model building exercise. While a wide variety of control systems is possible, we focus on compensation schemes that can be implemented using passive mechanical components such as springs, dampers, gearboxes, and levers. A single-loop control system that controls the leading- and trailing-edge flaps by sensing the main deck pitch angle is investigated. The key finding is that the critical wind speeds for flutter and torsional divergence of the sectional model of the bridge can be greatly increased, with good robustness characteristics, through passive feedback control. Static winglets are shown to be relatively ineffective.

scholarly journals A Parametric Study of Trailing Edge Flap Implementation on Three Different Airfoils Through an Artificial Neuronal Network

Symmetry ◽  
2020 ◽  
Vol 12 (5) ◽  
pp. 828
Author(s):  
Igor Rodriguez-Eguia ◽  
Iñigo Errasti ◽  
Unai Fernandez-Gamiz ◽  
Jesús María Blanco ◽  
Ekaitz Zulueta ◽  
...  
Keyword(s):  
Aerodynamic Coefficients ◽  
Trailing Edge ◽  
High Lift ◽  
Trailing Edge Flaps ◽  
Artificial Neural Network Ann ◽  
Lift And Drag ◽  
Artificial Neuronal Network ◽  
Naca 0012 ◽  
Drag Ratio ◽  
Lift To Drag Ratio

Trailing edge flaps (TEFs) are high-lift devices that generate changes in the lift and drag coefficients of an airfoil. A large number of 2D simulations are performed in this study, in order to measure these changes in aerodynamic coefficients and to analyze them for a given Reynolds number. Three different airfoils, namely NACA 0012, NACA 64(3)-618, and S810, are studied in relation to three combinations of the following parameters: angle of attack, flap angle (deflection), and flaplength. Results are in concordance with the aerodynamic results expected when studying a TEF on an airfoil, showing the effect exerted by the three parameters on both aerodynamic coefficients lift and drag. Depending on whether the airfoil flap is deployed on either the pressure zone or the suction zone, the lift-to-drag ratio, CL/CD, will increase or decrease, respectively. Besides, the use of a larger flap length will increase the higher values and decrease the lower values of the CL/CD ratio. In addition, an artificial neural network (ANN) based prediction model for aerodynamic forces was built through the results obtained from the research.

scholarly journals Analysis and Design of a Leading Edge with Morphing Capabilities for the Wing of a Regional Aircraft—Gapless Chord- and Camber-Increase for High-Lift Performance

2021 ◽  
Vol 11 (6) ◽  
pp. 2752
Author(s):  
Conchin Contell Asins ◽  
Volker Landersheim ◽  
Dominik Laveuve ◽  
Seiji Adachi ◽  
Michael May ◽  
...  
Keyword(s):  
Leading Edge ◽  
Bird Strike ◽  
High Lift ◽  
Analysis And Design ◽  
Actuation System ◽  
Aerodynamic Properties ◽  
Reinforced Plastic ◽  
Stall Angle ◽  
Carbon Fibre Reinforced Plastic ◽  
Electromechanical Actuation

In order to contribute to achieving noise and emission reduction goals, Fraunhofer and Airbus deal with the development of a morphing leading edge (MLE) as a high lift device for aircraft. Within the European research program “Clean Sky 2”, a morphing leading edge with gapless chord- and camber-increase for high-lift performance was developed. The MLE is able to morph into two different aerofoils—one for cruise and one for take-off/landing, the latter increasing lift and stall angle over the former. The shape flexibility is realised by a carbon fibre reinforced plastic (CFRP) skin optimised for bending and a sliding contact at the bottom. The material is selected in terms of type, thickness, and lay-up including ply-wise fibre orientation based on numerical simulation and material tests. The MLE is driven by an internal electromechanical actuation system. Load introduction into the skin is realised by span-wise stringers, which require specific stiffness and thermal expansion properties for this task. To avoid the penetration of a bird into the front spar of the wing in case of bird strike, a bird strike protection structure is proposed and analysed. In this paper, the designed MLE including aerodynamic properties, composite skin structure, actuation system, and bird strike behaviour is described and analysed.

Three-Dimensional and Rotational Aerodynamics on the NREL Phase VI Wind Turbine Blade

2008 ◽  
Vol 130 (3) ◽  
Author(s):  
Alvaro Gonzalez ◽  
Xabier Munduate
Keyword(s):  
Wind Turbine ◽  
Turbine Blade ◽  
Three Dimensional ◽  
Separated Flow ◽  
Leading Edge ◽  
Wind Turbine Blade ◽  
Trailing Edge ◽  
Rotating Blade ◽  
Nrel Phase Vi ◽  
Edge Separation

This work undertakes an aerodynamic analysis over the parked and the rotating NREL Phase VI wind turbine blade. The experimental sequences from NASA Ames wind tunnel selected for this study respond to the parked blade and the rotating configuration, both for the upwind, two-bladed wind turbine operating at nonyawed conditions. The objective is to bring some light into the nature of the flow field and especially the type of stall behavior observed when 2D aerofoil steady measurements are compared to the parked blade and the latter to the rotating one. From averaged pressure coefficients together with their standard deviation values, trailing and leading edge separated flow regions have been found, with the limitations of the repeatability of the flow encountered on the blade. Results for the parked blade show the progressive delay from tip to root of the trailing edge separation process, with respect to the 2D profile, and also reveal a local region of leading edge separated flow or bubble at the inner, 30% and 47% of the blade. For the rotating blade, results at inboard 30% and 47% stations show a dramatic suppression of the trailing edge separation, and the development of a leading edge separation structure connected with the extra lift.

Effect of kinematics of orogenic wedge on kinematic evolutionary paths and deformation profiles of major shear zones: An example from the eastern Himalaya 

2021 ◽  
Author(s):  
Pritam Ghosh ◽  
Kathakali Bhattacharyya
Keyword(s):  
Shear Zone ◽  
Strain Softening ◽  
Leading Edge ◽  
Shear Zones ◽  
Deformation History ◽  
Progressive Deformation ◽  
Trailing Edge ◽  
Orogenic Wedge ◽  
Transport Direction ◽  
Evolutionary Paths

<p>We examine how the deformation profile and kinematic evolutionary paths of two major shear zones with prolonged deformation history and large translations differ with varying structural positions along its transport direction in an orogenic wedge. We conduct this analysis on multiple exposures of the internal thrusts from the Sikkim Himalayan fold thrust belt, the Pelling-Munsiari thrust (PT), the roof thrust of the Lesser Himalayan duplex (LHD), and the overlying Main Central thrust (MCT). These two thrusts are regionally folded due to growth of the LHD and are exposed at different structural positions. The hinterlandmost exposures of the MCT and PT zones lie in the trailing parts of the duplex, while the foreland-most exposures of the same studied shear zones lie in the leading part of the duplex, and thus have recorded a greater connectivity with the duplex. The thicknesses of the shear zones progressively decrease toward the leading edge indicating variation in deformation conditions. Thickness-displacement plot reveals strain-softening from all the five studied MCT and the PT mylonite zones. However, the strain-softening mechanisms varied along its transport direction with the hinterland exposures recording dominantly dislocation-creep, while dissolution-creep and reaction-softening are dominant in the forelandmost exposures. Based on overburden estimation, the loss of overburden on the MCT and the PT zones is more in the leading edge (~26km and ~15km, respectively) than in the trailing edge (~10km and ~17km, respectively), during progressive deformation. Based on recalibrated recrystallized quartz grain thermometer (Law, 2014), the estimated deformation temperatures in the trailing edge are higher (~450-650°C) than in the leading edge (350-550°C) of the shear zones. This variation in the deformation conditions is also reflected in the shallow-crustal deformation structures with higher fracture intensity and lower spacing in the leading edge exposures of the shear zones as compared to the trailing edge exposures.</p><p>The proportion of mylonitic domains and micaceous minerals within the exposed shear zones increase and grain-size of the constituent minerals decreases progressively along the transport direction. This is also consistent with progressive increase in mean R<sub>s</sub>-values toward leading edge exposures of the same shear zones. Additionally, the α-value (stretch ratio) gradually increases toward the foreland-most exposures along with increasing angular shear strain. Vorticity estimates from multiple incremental strain markers indicate that the MCT and PT zones generally record a decelerating strain path. Therefore, the results from this study are counterintuitive to the general observation of a direct relationship between higher Rs-value and higher pure-shear component. We explain this observation in the context of the larger kinematics of the orogen, where the leading edge exposures have passed through the duplex structure, recording the greatest connectivity and most complete deformation history, resulting in the weakest shear zone that is also reflected in the deformation profiles and strain attributes. This study demonstrates that the same shear zone records varying deformation profile, strain and kinematic evolutionary paths due to varying deformation conditions and varying connectivity to the underlying footwall structures during progressive deformation of an orogenic wedge.</p>

Sign in / Sign up

Export Citation Format

Share Document