Low-level optical absorption phenomena in organic thin films for solar cell applications investigated by highly sensitive photocurrent and photothermal techniques

Author(s):  
Ludwig J. Goris ◽  
Ken Haenen ◽  
Milos Nesladek ◽  
A. Poruba ◽  
M. Vanecek ◽  
...  
Author(s):  
Dinesh Pathak ◽  
Sanjay Kumar ◽  
Sonali Andotra ◽  
Jibin Thomas ◽  
Navneet Kaur ◽  
...  

In this study, we have investigated new tailored organic semiconductors materials for the optoelectronic application, such as organic solar cells. The carbon-based organic semiconductor material has promising advantages in organic thin-film form. Moreover, due to its low cost, organic thin-films are suitable and cheaper than inorganic thin-film. The band gap of organic semiconductors materials can be tuned and mostly lies between 2.0eV to 4eV and the optical absorption edge of organic semiconductors typically lies in between 1.7eV to 3eV. They can be easily tailored by modifying the carbon chain and legends and looks promising for engineering the band gap to harness solar spectrum. In this work, with new tailored organic semiconductors the solution route is explored which is low cost processing method. (Anthracen-9-yl) methylene naphthalene-1-amine, 4-(anthracen-9-ylmethyleneamino)-1,5dimethyl-2-phenyl-1H-pyrazol-3-one and N-(anthracen-9-ylmethyl)-3,4-dimethoxyaniline thin-films are processed by spin coating method with changing concentration such as 0.05 wt% and 0.08 wt%. Thin films of Organic semiconductors were prepared on glass substrate and annealed at 55°C. The structural and optical behaviour of (Anthracen-9-yl) methylene naphthalene-1-amine, 4-(anthracen-9-ylmethyleneamino)-1,5dimethyl-2-phenyl-1H-pyrazol-3-one and N-(anthracen-9-ylmethyl)-3,4-dimethoxyaniline organic semiconductors thin films is studied by X-ray diffraction (XRD), Scanning electron microscopy (SEM) and UV-Visible Spectroscopy technique. The XRD data of synthesized sample suggests the Nano crystallinity of the Organic layers. The SEM micrographs shows the dense packing when we increase the wt% 0.05 to 0.08. Analysis of the optical absorption measurements found that the engineered band gap of synthesized thin films are 2.18eV, 2.35eV, 2.36eV, 2.52eV and 2.65eV which suggest suitability for applications of Optoelectronic devices such as solar cell. Such light weight, eco-friendly and disposable new carbon based materials seems to have potential to replace other traditional hazardous heavy materials for future eco-friendly flat fast electronics. Keywords: Thin-film, solar cell, tailored organic semiconductors, XRD, SEM, UV-Vis spectroscopy.


2005 ◽  
Vol 40 (6) ◽  
pp. 1413-1418 ◽  
Author(s):  
L. Goris ◽  
K. Haenen ◽  
M. Nesládek ◽  
P. Wagner ◽  
D. Vanderzande ◽  
...  

2017 ◽  
Vol 21 (04-06) ◽  
pp. 322-326
Author(s):  
Keitaro Eguchi ◽  
Sandrine Heutz ◽  
Kunio Awaga

Molecular templating is an attractive method to improve the crystallinity and control the molecular orientations of organic thin films. Here, we report on the templating effects of an organic [Formula: see text]-type semiconductor, tetrakis(thiadiazole)porphyrazine (H2TTDPz), on the structure and optical absorption of a [Formula: see text]-type semiconductor, copper phthalocyanine (CuPc). X-ray diffraction measurements for the double layer thin films, CuPc/H2TTDPz, indicate a face-on orientation of CuPc, which is replicating the structure of the H2TTDPz thin films, even though the CuPc thin films usually form edge-on-type thin films. The optical absorption measurements show new low-energy transitions in the templated CuPc films.


Author(s):  
Nguyen Tien Thanh ◽  
Dao Tien Thanh ◽  
Nguyen Si Hieu ◽  
Nguyen Thi Mai Huong

This paper outlines the synthesis of the glass/FTO/Au/ and of the glass/FTO/Si/Au/ nanoparticles embedded thin films and then outlines some obtained experiment results concerning their properties of surface morphology, structure, chemical composition and optical absorption in comparison. Based on the measured results of SEM, EDX, XRD and UV-VIS spectroscopy we observed that the structure of the sputtered Si layer is amorphous phase meanwhile the structure of the sputtered Au layer is crystallized phase. Depending on the sputtered layers (Si, Au) thicknesses and technological conditions the different surfaces morphologies of the Au flat surface layer or the Au bumpy surface layer with different sizes of nanoparticles /clusters are formed on both the samples surfaces of FTO and amorphous Si layers. Notably, the optical absorption spectra of glass/FTO/Si/Au thin film in both cases of thermal annealing and without thermal annealing are significantly enhanced and shifted to blue- and red regions, these results can be explained by the role of the amorphous Si layer, as well as the Si/Au Schottky layers/nanoparticles barrier configurations caused. The glass/FTO/Si/Au layer/nanoparticles thin films could be used for integration with the core structure (Au/TiO2) of plasmonic solar cell for aiming to  enhance the solar cell performance.


2020 ◽  
Vol 59 (10) ◽  
pp. 105503
Author(s):  
Wafaa Magdy ◽  
Ayaka Kanai ◽  
F. A. Mahmoud ◽  
E. T. El Shenawy ◽  
S. A. Khairy ◽  
...  

2020 ◽  
Vol 13 (4) ◽  
pp. 866-872
Author(s):  
HAO Ya-ru ◽  
◽  
◽  
DENG Zhao-qi

Sign in / Sign up

Export Citation Format

Share Document