Application of active optical sensors to probe the vertical structure of the urban boundary layer and assess anomalies in air quality model PM 2.5 forecasts

2011 ◽  
Author(s):  
Chuen-Meei Gan ◽  
Yonghua Wu ◽  
L. M. Bomidi ◽  
Barry Gross ◽  
Fred Moshary
Keyword(s):  
Boundary Layer ◽  
Air Quality ◽  
Optical Sensors ◽  
Vertical Structure ◽  
Urban Boundary Layer ◽  
Air Quality Model ◽  
Quality Model ◽  
Pm 2.5

scholarly journals Impact of Bay-Breeze Circulations on Surface Air Quality and Boundary Layer Export

2014 ◽  
Vol 53 (7) ◽  
pp. 1697-1713 ◽  
Author(s):  
Christopher P. Loughner ◽  
Maria Tzortziou ◽  
Melanie Follette-Cook ◽  
Kenneth E. Pickering ◽  
Daniel Goldberg ◽  
...  
Keyword(s):  
Boundary Layer ◽  
Air Quality ◽  
Chesapeake Bay ◽  
Surface Ozone ◽  
Early Morning ◽  
Pollution Transport ◽  
Air Quality Model ◽  
Quality Model ◽  
Early Afternoon ◽  
Bay Breeze

AbstractMeteorological and air-quality model simulations are analyzed alongside observations to investigate the role of the Chesapeake Bay breeze on surface air quality, pollutant transport, and boundary layer venting. A case study was conducted to understand why a particular day was the only one during an 11-day ship-based field campaign on which surface ozone was not elevated in concentration over the Chesapeake Bay relative to the closest upwind site and why high ozone concentrations were observed aloft by in situ aircraft observations. Results show that southerly winds during the overnight and early-morning hours prevented the advection of air pollutants from the Washington, D.C., and Baltimore, Maryland, metropolitan areas over the surface waters of the bay. A strong and prolonged bay breeze developed during the late morning and early afternoon along the western coastline of the bay. The strength and duration of the bay breeze allowed pollutants to converge, resulting in high concentrations locally near the bay-breeze front within the Baltimore metropolitan area, where they were then lofted to the top of the planetary boundary layer (PBL). Near the top of the PBL, these pollutants were horizontally advected to a region with lower PBL heights, resulting in pollution transport out of the boundary layer and into the free troposphere. This elevated layer of air pollution aloft was transported downwind into New England by early the following morning where it likely mixed down to the surface, affecting air quality as the boundary layer grew.

Use of a Dynamic Air Quality Model to Reduce the Uncertainties of Seasonal and Annual Atmospheric Depositions for Mercury TMDLs

2005 ◽  
Vol 2005 (3) ◽  
pp. 1393-1414
Author(s):  
Kuo-Liang Lai ◽  
Janet Kremer ◽  
Susan Sciarratta ◽  
R. Dwight Atkinson ◽  
Tom Myers
Keyword(s):  
Air Quality ◽  
Air Quality Model ◽  
Quality Model ◽  
Atmospheric Depositions

scholarly journals Assessment of Emission Reduction and Meteorological Change in PM2.5 and Transport Flux in Typical Cities Cluster during 2013–2017

2021 ◽  
Vol 13 (10) ◽  
pp. 5685
Author(s):  
Panbo Guan ◽  
Hanyu Zhang ◽  
Zhida Zhang ◽  
Haoyuan Chen ◽  
Weichao Bai ◽  
...  
Keyword(s):  
Air Quality ◽  
Action Plan ◽  
Influence Factors ◽  
Pollution Prevention ◽  
Weather Conditions ◽  
Yangtze River Delta ◽  
Control Measures ◽  
Joint Control ◽  
Air Quality Model ◽  
Quality Model

Under the Air Pollution Prevention and Control Action Plan (APPCAP) implemented, China has witnessed an air quality change during the past five years, yet the main influence factors remain relatively unexplored. Taking the Beijing-Tianjin-Hebei (BTH) and Yangtze River Delta (YRD) regions as typical cluster cities, the Weather Research Forecasting (WRF) and Comprehensive Air Quality Model with Extension (CAMx) were introduced to demonstrate the meteorological and emission contribution and PM2.5 flux distribution. The results showed that the PM2.5 concentration in BTH and YRD significantly declined with a descend ratio of −39.6% and −28.1%, respectively. For the meteorological contribution, those regions had a similar tendency with unfavorable conditions in 2013–2015 (contribution concentration 1.6–3.8 μg/m3 and 1.1–3.6 μg/m3) and favorable in 2016 (contribution concentration −1.5 μg/m3 and −0.2 μg/m3). Further, the absolute value of the net flux’s intensity was positively correlated with the degree of the favorable/unfavorable weather conditions. When it came to emission intensity, the total net inflow flux increased, and the outflow flux decreased significantly across the border with the emission increasing. In short: the aforementioned results confirmed the effectiveness of the regional joint emission control and provided scientific support for the proposed effective joint control measures.

A contribution to the air quality impact assessment of a roadway in Lisbon. The air quality model APOLO

1993 ◽  
Vol 134 (1-3) ◽  
pp. 1-7 ◽  
Author(s):  
Ana Isabel A. Miranda ◽  
Miguel S. Conceição ◽  
Carlos S. Borrego
Keyword(s):  
Air Quality ◽  
Impact Assessment ◽  
Air Quality Model ◽  
Quality Model

scholarly journals Ensemble Predictions of Air Pollutants in China in 2013 for Health Effects Studies Using WRF/CMAQ Modeling System with Four Emission Inventories

2017 ◽  
Author(s):  
Jianlin Hu ◽  
Xun Li ◽  
Lin Huang ◽  
Qi Ying ◽  
Qiang Zhang ◽  
...  
Keyword(s):  
Air Quality ◽  
Health Effects ◽  
Air Pollutants ◽  
Emission Inventory ◽  
Model Performance ◽  
Observation Data ◽  
Emission Inventories ◽  
Air Quality Model ◽  
Quality Model ◽  
Future Health

Abstract. Accurate exposure estimates are required for health effects analyses of severe air pollution in China. Chemical transport models (CTMs) are widely used tools to provide detailed information of spatial distribution, chemical composition, particle size fractions, and source origins of pollutants. The accuracy of CTMs' predictions in China is largely affected by the uncertainties of public available emission inventories. The Community Multi-scale Air Quality model (CMAQ) with meteorological inputs from the Weather Research and Forecasting model (WRF) were used in this study to simulate air quality in China in 2013. Four sets of simulations were conducted with four different anthropogenic emission inventories, including the Multi-resolution Emission Inventory for China (MEIC), the Emission Inventory for China by School of Environment at Tsinghua University (SOE), the Emissions Database for Global Atmospheric Research (EDGAR), and the Regional Emission inventory in Asia version 2 (REAS2). Model performance was evaluated against available observation data from 422 sites in 60 cities across China. Model predictions of O3 and PM2.5 with the four inventories generally meet the criteria of model performance, but difference exists in different pollutants and different regions among the inventories. Ensemble predictions were calculated by linearly combining the results from different inventories under the constraint that sum of the squared errors between the ensemble results and the observations from all the cities was minimized. The ensemble annual concentrations show improved agreement with observations in most cities. The mean fractional bias (MFB) and mean fractional errors (MFE) of the ensemble predicted annual PM2.5 at the 60 cities are −0.11 and 0.24, respectively, which are better than the MFB (−0.25–−0.16) and MFE (0.26–0.31) of individual simulations. The ensemble annual 1-hour peak O3 (O3-1 h) concentrations are also improved, with mean normalized bias (MNB) of 0.03 and mean normalized errors (MNE) of 0.14, compared to MNB of 0.06–0.19 and MNE of 0.16–0.22 of the individual predictions. The ensemble predictions agree better with observations with daily, monthly, and annual averaging times in all regions of China for both PM2.5 and O3-1 h. The study demonstrates that ensemble predictions by combining predictions from individual emission inventories can improve the accuracy of predicted temporal and spatial distributions of air pollutants. This study is the first ensemble model study in China using multiple emission inventories and the results are publicly available for future health effects studies.

scholarly journals Impact of a new condensed toluene mechanism on air quality model predictions in the US

2010 ◽  
Vol 3 (4) ◽  
pp. 2291-2314
Author(s):  
G. Sarwar ◽  
K. W. Appel ◽  
A. G. Carlton ◽  
R. Mathur ◽  
K. Schere ◽  
...  
Keyword(s):  
Air Quality ◽  
Los Angeles ◽  
Production Efficiency ◽  
Sensitivity Study ◽  
Chemical Mechanism ◽  
Ozone Production ◽  
Daily Maximum ◽  
Air Quality Model ◽  
Quality Model ◽  
Mixing Ratios

Abstract. A new condensed toluene mechanism is incorporated into the Community Multiscale Air Quality Modeling system. Model simulations are performed using the CB05 chemical mechanism containing the existing (base) and the new toluene mechanism for the western and eastern US for a summer month. With current estimates of tropospheric emission burden, the new toluene mechanism increases monthly mean daily maximum 8-h ozone by 1.0–3.0 ppbv in Los Angeles, Portland, Seattle, Chicago, Cleveland, northeastern US, and Detroit compared to that with the base toluene chemistry. It reduces model mean bias for ozone at elevated observed ozone mixing ratios. While the new mechanism increases predicted ozone, it does not enhance ozone production efficiency. Sensitivity study suggests that it can further enhance ozone if elevated toluene emissions are present. While changes in total fine particulate mass are small, predictions of in-cloud SOA increase substantially.

Sign in / Sign up

Export Citation Format

Share Document