Three-Dimensional Scale-Model Tank Experiment of the Hudson Canyon Region

2014 ◽  
Author(s):  
Jason D. Sagers
Keyword(s):  
Three Dimensional ◽  
Scale Model ◽  
Tank Experiment

Three-dimensional Reconstruction of Microscopic Image Based on Multi-ST Algorithm

2020 ◽  
Vol 64 (2) ◽  
pp. 20506-1-20506-7
Author(s):  
Min Zhu ◽  
Rongfu Zhang ◽  
Pei Ma ◽  
Xuedian Zhang ◽  
Qi Guo
Keyword(s):  
3D Reconstruction ◽  
Three Dimensional ◽  
Scale Model ◽  
Microscopic Image ◽  
Multi Scale ◽  
Gaussian Pyramid ◽  
Cost Aggregation ◽  
Dimensional Reconstruction ◽  
Image Pairs ◽  
Accurate Matching

Abstract Three-dimensional (3D) reconstruction is extensively used in microscopic applications. Reducing excessive error points and achieving accurate matching of weak texture regions have been the classical challenges for 3D microscopic vision. A Multi-ST algorithm was proposed to improve matching accuracy. The process is performed in two main stages: scaled microscopic images and regularized cost aggregation. First, microscopic image pairs with different scales were extracted according to the Gaussian pyramid criterion. Second, a novel cost aggregation approach based on the regularized multi-scale model was implemented into all scales to obtain the final cost. To evaluate the performances of the proposed Multi-ST algorithm and compare different algorithms, seven groups of images from the Middlebury dataset and four groups of experimental images obtained by a binocular microscopic system were analyzed. Disparity maps and reconstruction maps generated by the proposed approach contained more information and fewer outliers or artifacts. Furthermore, 3D reconstruction of the plug gauges using the Multi-ST algorithm showed that the error was less than 0.025 mm.

Modeling and Assessment of the Produced Water Discharges from Offshore Petroleum Platforms

2007 ◽  
Vol 42 (4) ◽  
pp. 303-310 ◽  
Author(s):  
Zhi Chen ◽  
Lin Zhao ◽  
Kenneth Lee ◽  
Charles Hannath
Keyword(s):  
Random Walk ◽  
Produced Water ◽  
Model Development ◽  
Three Dimensional ◽  
Monitoring Program ◽  
Ecological Monitoring ◽  
Numerical Approach ◽  
Ocean Model ◽  
Scale Model ◽  
Water Stream

Abstract There has been a growing interest in assessing the risks to the marine environment from produced water discharges. This study describes the development of a numerical approach, POM-RW, based on an integration of the Princeton Ocean Model (POM) and a Random Walk (RW) simulation of pollutant transport. Specifically, the POM is employed to simulate local ocean currents. It provides three-dimensional hydrodynamic input to a Random Walk model focused on the dispersion of toxic components within the produced water stream on a regional spatial scale. Model development and field validation of the predicted current field and pollutant concentrations were conducted in conjunction with a water quality and ecological monitoring program for an offshore facility located on the Grand Banks of Canada. Results indicate that the POM-RW approach is useful to address environmental risks associated with the produced water discharges.

Numerical Study of the Mean and Filtered Characteristics of Turbulent Jets Impinging on Convex and Flat Surfaces Using LES

2012 ◽  
Author(s):  
Adra Benhacine ◽  
Zoubir Nemouchi ◽  
Lyes Khezzar ◽  
Nabil Kharoua
Keyword(s):  
Convex Surface ◽  
Numerical Study ◽  
Three Dimensional ◽  
Turbulent Jets ◽  
Scale Model ◽  
Wall Jet ◽  
Potential Core ◽  
Flat Surfaces ◽  
Free Jet ◽  
Eddy Simulation

A numerical study of a turbulent plane jet impinging on a convex surface and on a flat surface is presented, using the large eddy simulation approach and the Smagorinski-Lilly sub-grid-scale model. The effects of the wall curvature on the unsteady filtered, and the steady mean, parameters characterizing the dynamics of the wall jet are addressed in particular. In the free jet upstream of the impingement region, significant and fairly ordered velocity fluctuations, that are not turbulent in nature, are observed inside the potential core. Kelvin-Helmholtz instabilities in the shear layer between the jet and the surrounding air are detected in the form of wavy sheets of vorticity. Rolled up vortices are detached from these sheets in a more or less periodic manner, evolving into distorted three dimensional structures. Along the wall jet the Coanda effect causes a marked suction along the convex surface compared with the flat one. As a result, relatively important tangential velocities and a stretching of sporadic streamwise vortices are observed, leading to friction coefficient values on the curved wall higher than those on the flat wall.

Effective Shear Area in One Dimensional Ship Hull Finite Element Models to Predict Natural Frequencies of Vibration

2013 ◽  
Author(s):  
Osvaldo Pinheiro de Souza e Silva ◽  
Severino Fonseca da Silva Neto ◽  
Ilson Paranhos Pasqualino ◽  
Antonio Carlos Ramos Troyman
Keyword(s):  
Finite Element ◽  
Natural Frequencies ◽  
Three Dimensional ◽  
Experimental Tests ◽  
Numerical Results ◽  
Computational Method ◽  
Scale Model ◽  
Dimensional Model ◽  
One Dimensional ◽  
Shear Area

This work discusses procedures used to determine effective shear area of ship sections. Five types of ships have been studied. Initially, the vertical natural frequencies of an acrylic scale model 3m in length in a laboratory at university are obtained from experimental tests and from a three dimensional numerical model, and are compared to those calculated from a one dimensional model which the effective shear area was calculated by a practical computational method based on thin-walled section Shear Flow Theory. The second studied ship was a ship employed in midshipmen training. Two models were made to complement some studies and vibration measurements made for those ships in the end of 1980 decade when some vibration problems in them were solved as a result of that effort. Comparisons were made between natural frequencies obtained experimentally, numerically from a three dimensional finite element model and from a one dimensional model in which effective shear area is considered. The third and fourth were, respectively, a tanker ship and an AHTS (Anchor Handling Tug Supply) boat, both with comparison between three and one dimensional models results out of water. Experimental tests had been performed in these two ships and their results were used in other comparison made after the inclusion of another important effect that acts simultaneously: the added mass. Finally, natural frequencies experimental and numerical results of a barge are presented. The natural frequencies numerical results of vertical hull vibration obtained from these approximations of effective shear areas for the five ships are finally discussed.

scholarly journals Stability Improvement Method for Embankment Dam with Respect to Conduit Cracks

2022 ◽  
Vol 12 (2) ◽  
pp. 567
Author(s):  
Young-Hak Lee ◽  
Jung-Hyun Ryu ◽  
Joon Heo ◽  
Jae-Woong Shim ◽  
Dal-Won Lee
Keyword(s):  
Large Scale ◽  
Pore Water Pressure ◽  
Water Pressure ◽  
Three Dimensional ◽  
Internal Erosion ◽  
Scale Model ◽  
Seepage Analysis ◽  
Large Scale Model ◽  
Proposed Model ◽  
Improvement Method

In recent years, as the number of reservoir embankments constructed has increased, embankment failures due to cracks in aging conduits have also increased. In this study, a crack in a conduit was modeled based on the current conduit design model, and the risk of internal erosion was analyzed using a large-scale model test and three-dimensional deformation–seepage analysis. The results show that when cracks existed in the conduit, soil erosion and cavitation occurred near the crack area, which made the conduit extremely vulnerable to internal erosion. Herein, a model is proposed that can reduce internal erosion by applying a layer of sand and geotextiles on the upper part of the conduit located close to the downstream slope. In the proposed model, only partial erosion occurred inside the conduit, and no cavitation appeared near the crack in the conduit. The results suggest that internal erosion can be suppressed when the water pressure acting intensively on the crack in the conduit is dispersed by the drainage layer. To validate these results, the pore water pressure, seepage line, and hydraulic gradient were investigated to confirm the erosion phenomenon and reinforcement effect.

scholarly journals An Experimental and Computational Investigation of Flow in a Radial Inlet of an Industrial Pipeline Centrifugal Compressor

1994 ◽  
Author(s):  
M. B. Flathers ◽  
G. E. Bache ◽  
R. Rainsberger
Keyword(s):  
Centrifugal Compressor ◽  
Numerical Study ◽  
Three Dimensional ◽  
Experimental Results ◽  
Scale Model ◽  
Navier Stokes ◽  
Angle Distribution ◽  
Computational Results ◽  
Industrial Pipeline ◽  
Design Schedule

The flowfield of a complex three dimensional radial inlet for an industrial pipeline centrifugal compressor has been experimentally determined on a half scale model. Based on the experimental results, inlet guide vanes have been designed to correct pressure and swirl angle distribution deficiencies. The unvaned and vaned inlets are analyzed with a commercially available fully 3D viscous Navier-Stokes code. Since experimental results were available prior to the numerical study, the unvaned analysis is considered a postdiction while the vaned analysis is considered a prediction. The computational results of the unvaned inlet have been compared to the previously obtained experimental results. The experimental method utilized for the unvaned inlet is repeated for the vaned inlet and the data has been used to verify the computational results. The paper will discuss experimental, design and computational procedures, grid generation, boundary conditions, and experimental versus computational methods. Agreement between experimental and computational results is very good, both in prediction and postdiction modes. The results of this investigation indicate that CFD offers a measurable advantage in design, schedule and cost and can be applied to complex, three dimensional radial inlets.

scholarly journals Thin Solid Film Electrolyte and Its Impact on Electrode Polarization in Solid Oxide Fuel Cells Studied by Three-Dimensional Microstructure-Scale Numerical Simulation

Energies ◽  
2020 ◽  
Vol 13 (19) ◽  
pp. 5127
Author(s):  
Tomasz A. Prokop ◽  
Grzegorz Brus ◽  
Shinji Kimijima ◽  
Janusz S. Szmyd
Keyword(s):  
Focused Ion Beam ◽  
Ion Beam ◽  
Three Dimensional ◽  
Reaction Rates ◽  
Solid Oxide ◽  
Scale Model ◽  
Electrode Polarization ◽  
Computational Domain ◽  
Oxide Fuel ◽  
The Impact

In this work, a three-dimensional microstructure-scale model of a Solid Oxide Fuel Cell’s Positive-Electrolyte-Negative assembly is applied for the purpose of investigating the impact of decreasing the electrolyte thickness on the magnitude, and the composition of electrochemical losses generated within the cell. Focused-Ion-Beam Scanning Electron Microscopy reconstructions are used to construct a computational domain, in which charge transport equations are solved. Butler–Volmer model is used to compute local reaction rates, and empirical relationships are used to obtain local conductivities. The results point towards three-dimensional nature of transport phenomena in thin electrolytes, and electrode-electrolyte interfaces.

Sign in / Sign up

Export Citation Format

Share Document