scholarly journals Mass spectrometry imaging of the in situ drug release from nanocarriers

2018 ◽  
Vol 4 (10) ◽  
pp. eaat9039 ◽  
Author(s):  
Jinjuan Xue ◽  
Huihui Liu ◽  
Suming Chen ◽  
Caiqiao Xiong ◽  
Lingpeng Zhan ◽  
...  
Keyword(s):  
Mass Spectrometry ◽  
Drug Delivery ◽  
Drug Release ◽  
Drug Carrier ◽  
Ionization Mass ◽  
Label Free ◽  
Normal Tissues ◽  
Liver Tissues

It is crucial but of a great challenge to study in vivo and in situ drug release of nanocarriers when developing a nanomaterial-based drug delivery platform. We developed a new label-free laser desorption/ionization mass spectrometry (MS) imaging strategy that enabled visualization and quantification of the in situ drug release in tissues by monitoring intrinsic MS signal intensity ratio of loaded drug over the nanocarriers. The proof of concept was demonstrated by investigating the doxorubicin (DOX)/polyethylene glycol–MoS2 nanosheets drug delivery system in tumor mouse models. The results revealed a tissue-dependent release behavior of DOX during circulation with the highest dissociation in tumor and lowest dissociation in liver tissues. The drug-loaded MoS2 nanocarriers are predominantly distributed in lung, spleen, and liver tissues, whereas the accumulation in the tumor was unexpectedly lower than in normal tissues. This new strategy could also be extended to other drug-carrier systems, such as carbon nanotubes and black phosphorus nanosheets, and opened a new path to evaluate the drug release of nanocarriers in the suborgan level.

In Vitro and In Vivo Drug Release from a Novel In Situ Forming Drug Delivery System

2007 ◽  
Vol 25 (6) ◽  
pp. 1347-1354 ◽  
Author(s):  
Heiko Kranz ◽  
Erol Yilmaz ◽  
Gayle A. Brazeau ◽  
Roland Bodmeier
Keyword(s):  
Drug Delivery ◽  
Drug Release ◽  
Drug Delivery System ◽  
Delivery System ◽  
In Situ Forming

scholarly journals Revealing the Distribution of Aggregation-Induced Emission Nanoparticles via Dual-Modality Imaging with Fluorescence and Mass Spectrometry

Research ◽  
2021 ◽  
Vol 2021 ◽  
pp. 1-9
Author(s):  
Liucheng Mao ◽  
Yuming Jiang ◽  
Hui Ouyang ◽  
Yulin Feng ◽  
Ruoxin Li ◽  
...  
Keyword(s):  
Mass Spectrometry ◽  
Fluorescence Imaging ◽  
The Body ◽  
Ionization Mass ◽  
Label Free ◽  
Aggregation Induced Emission ◽  
Dual Modality ◽  
Imaging Strategy ◽  
Dual Modality Imaging

Aggregation-induced emission nanoparticles (AIE NPs) are widely used in the biomedical field. However, understanding the biological process of AIE NPs via fluorescence imaging is challenging because of the strong background and poor penetration depth. Herein, we present a novel dual-modality imaging strategy that combines fluorescence imaging and label-free laser desorption/ionization mass spectrometry imaging (LDI MSI) to map and quantify the biodistribution of AIE NPs (TPAFN-F127 NPs) by monitoring the intrinsic photoluminescence and mass spectrometry signal of the AIE molecule. We discovered that TPAFN-F127 NPs were predominantly distributed in the liver and spleen, and most gradually excreted from the body after 5 days. The accumulation and retention of TPAFN-F127 NPs in tumor sites were also confirmed in a tumor-bearing mouse model. As a proof of concept, the suborgan distribution of TPAFN-F127 NPs in the spleen was visualized by LDI MSI, and the results revealed that TPAFN-F127 NPs were mainly distributed in the red pulp of the spleen with extremely high concentrations within the marginal zone. The in vivo toxicity test demonstrated that TPAFN-F127 NPs are nontoxic for a long-term exposure. This dual-modality imaging strategy provides some insights into the fine distribution of AIE NPs and might also be extended to other polymeric NPs to evaluate their distribution and drug release behaviors in vivo.

In Vivo, In Situ Tissue Analysis Using Rapid Evaporative Ionization Mass Spectrometry

2009 ◽  
Vol 48 (44) ◽  
pp. 8240-8242 ◽  
Author(s):  
Karl-Christian Schäfer ◽  
Júlia Dénes ◽  
Katalin Albrecht ◽  
Tamás Szaniszló ◽  
Júlia Balog ◽  
...  
Keyword(s):  
Mass Spectrometry ◽  
Ionization Mass Spectrometry ◽  
Ionization Mass ◽  
Tissue Analysis

Acyclovir Loaded Solid Lipid Nanoparticle Based Cream: A Novel Drug Delivery System

2017 ◽  
Vol 7 (1) ◽  
Author(s):  
EL- Assal I. A. ◽  
Retnowati .
Keyword(s):  
Drug Delivery ◽  
Drug Release ◽  
Antiviral Agent ◽  
Study Drug ◽  
Particle Size Analysis ◽  
Stability Study ◽  
Size Analysis ◽  
Solid Lipid ◽  
Dermal Delivery

Objective of the present investigation was enthused by the possibility to develop solid lipid nanoparticles (SLNs) of hydrophilic drug acyclovir. Also study vitro and vivo drug delivery. Methods: Drug loaded SLNs (ACV-SLNs) were prepared by high pressure homogenization of aqueous surfactant solutions containing the drug-loaded lipids in the melted or in the solid state with formula optimization study (Different lipid concentration, drug loaded, homogenization / stirring speed and compritol 888ATO: drug ratio). ACV - SLN incorporated in cream base. The pH was evaluated and rheological study. Drug release was evaluated and compared with simple cream- drug, ACV – SLN with compritol 888ATO and marketed cream. The potential of SLN as the carrier for dermal delivery was studied. Results: Particle size analysis of SLNs prove small, smooth, spherical shape particle ranged from 150 to 200 nm for unloaded and from 330 to 444 nm for ACV loaded particles. The EE% for optimal formula is 72% with suitable pH for skin application. Rheological behavior is shear thinning and thixotropic. Release study proved controlled drug release for SLNs especially in formula containing compritol88 ATO. Stability study emphasized an insignificant change in SLNs properties over 6 month. In-vivo study showed significantly higher accumulation of ACV in stratum corneum, dermal layer, and receptor compartment compared with blank skin. Conclusion: AVC-loaded SLNs might be beneficial in controlling drug release, stable and improving dermal delivery of antiviral agent(s).

Development and Evaluation of Floating Pulsatile Drug Delivery System Using Meloxicam

2017 ◽  
Vol 7 (04) ◽  
Author(s):  
ShirishaG. Suddala ◽  
S. K. Sahoo ◽  
M. R. Yamsani
Keyword(s):  
Rheumatoid Arthritis ◽  
Drug Delivery ◽  
Drug Release ◽  
Drug Delivery System ◽  
Delivery System ◽  
Lag Time ◽  
Oral Dosage ◽  
Lag Phase ◽  
Pulsatile Drug Delivery

Objective: The objective of this research work was to develop and evaluate the floating– pulsatile drug delivery system (FPDDS) of meloxicam intended for Chrono pharmacotherapy of rheumatoid arthritis. Methods: The system consisting of drug containing core, coated with hydrophilic erodible polymer, which is responsible for a lag phase for pulsatile release, top cover buoyant layer was prepared with HPMC K4M and sodium bicarbonate, provides buoyancy to increase retention of the oral dosage form in the stomach. Meloxicam is a COX-2 inhibitor used to treat joint diseases such as osteoarthritis and rheumatoid arthritis. For rheumatoid arthritis Chrono pharmacotherapy has been recommended to ensure that the highest blood levels of the drug coincide with peak pain and stiffness. Result and discussion: The prepared tablets were characterized and found to exhibit satisfactory physico-chemical characteristics. Hence, the main objective of present work is to formulate FPDDS of meloxicam in order to achieve drug release after pre-determined lag phase. Developed formulations were evaluated for in vitro drug release studies, water uptake and erosion studies, floating behaviour and in vivo radiology studies. Results showed that a certain lag time before drug release which was due to the erosion of the hydrophilic erodible polymer. The lag time clearly depends on the type and amount of hydrophilic polymer which was applied on the inner cores. Floating time and floating lag time was controlled by quantity and composition of buoyant layer. In vivo radiology studies point out the capability of the system of longer residence time of the tablets in the gastric region and releasing the drug after a programmed lag time. Conclusion: The optimized formulation of the developed system provided a lag phase while showing the gastroretension followed by pulsatile drug release that would be beneficial for chronotherapy of rheumatoid arthritis and osteoarthritis.

Formulation, Development and Characterization of Floating Beads of Diltiazem Hydrochloride

2016 ◽  
Vol 6 (1) ◽  
Author(s):  
Anamika Saxena Saxena ◽  
Santosh Kitawat ◽  
Kalpesh Gaur ◽  
Virendra Singh
Keyword(s):  
Drug Delivery ◽  
Drug Release ◽  
Drug Delivery Systems ◽  
Entrapment Efficiency ◽  
Repeated Administration ◽  
Alginate Beads ◽  
Delivery Systems ◽  
Sem Analysis ◽  
Formulation Development

The main goal of any drug delivery system is to achieve desired concentration of the drug in blood or tissue, which is therapeutically effective and nontoxic for a prolonged period. Various attempts have been made to develop gastroretentive delivery systems such as high density system, swelling, floating system. The recent developments of FDDS including the physiological and formulation variables affecting gastric retention, approaches to design single-unit and multiple-unit floating systems, and their classification and formulation aspects are covered in detail. Gastric emptying is a complex process and makes in vivo performance of the drug delivery systems uncertain. In order to avoid this variability, efforts have been made to increase the retention time of the drug-delivery systems for more than 12 hours. The floating or hydrodynamically controlled drug delivery systems are useful in such application. Background of the research: Diltiazem HCL (DTZ), has short biological half life of 3-4 h, requires rather high frequency of administration. Due to repeated administration there may be chances of patient incompliance and toxicity problems. Objective: The objective of study was to develop sustained release alginate beads of DTZ for reduction in dosing frequency, high bioavailability and better patient compliance. Methodology: Five formulations prepared by using different drug to polymer ratios, were evaluated for relevant parameters and compared. Alginate beads were prepared by ionotropic external gelation technique using CaCl2 as cross linking agent. Prepared beads were evaluated for % yield, entrapment efficiency, swelling index in 0.1N HCL, drug release study and SEM analysis. In order to improve %EE and drug release, LMP and sunflower oil were used as copolymers along with sodium alginate.

Nanostructured Ketorolac-Tromethamine/MCF: Synthesis, Characterization and Application in Drug Release System

2018 ◽  
Vol 14 (5) ◽  
pp. 432-439 ◽  
Author(s):  
Juliana M. Juarez ◽  
Jorgelina Cussa ◽  
Marcos B. Gomez Costa ◽  
Oscar A. Anunziata
Keyword(s):  
Drug Delivery ◽  
Drug Release ◽  
Therapeutic Efficacy ◽  
Drug Delivery Systems ◽  
Controlled Drug Release ◽  
Delivery Systems ◽  
The Body ◽  
Fickian Diffusion ◽  
Ketorolac Tromethamine

Background: Controlled drug delivery systems can maintain the concentration of drugs in the exact sites of the body within the optimum range and below the toxicity threshold, improving therapeutic efficacy and reducing toxicity. Mesostructured Cellular Foam (MCF) material is a new promising host for drug delivery systems due to high biocompatibility, in vivo biodegradability and low toxicity. Methods: Ketorolac-Tromethamine/MCF composite was synthesized. The material synthesis and loading of ketorolac-tromethamine into MCF pores were successful as shown by XRD, FTIR, TGA, TEM and textural analyses. Results: We obtained promising results for controlled drug release using the novel MCF material. The application of these materials in KETO release is innovative, achieving an initial high release rate and then maintaining a constant rate at high times. This allows keeping drug concentration within the range of therapeutic efficacy, being highly applicable for the treatment of diseases that need a rapid response. The release of KETO/MCF was compared with other containers of KETO (KETO/SBA-15) and commercial tablets. Conclusion: The best model to fit experimental data was Ritger-Peppas equation. Other models used in this work could not properly explain the controlled drug release of this material. The predominant release of KETO from MCF was non-Fickian diffusion.

Sign in / Sign up

Export Citation Format

Share Document