scholarly journals Structure of cyanobacterial phycobilisome core revealed by structural modeling and chemical cross-linking

2021 ◽  
Vol 7 (2) ◽  
pp. eaba5743
Author(s):  
Haijun Liu ◽  
Mengru M. Zhang ◽  
Daniel A. Weisz ◽  
Ming Cheng ◽  
Himadri B. Pakrasi ◽  
...  
Keyword(s):  
Energy Transfer ◽  
Excitation Energy Transfer ◽  
Energy Coupling ◽  
Regulatory Elements ◽  
Photochemical Activity ◽  
Structural Basis ◽  
Bottom Surface ◽  
Cross Linking ◽  
Orange Carotenoid Protein ◽  
Chemical Cross Linking

In cyanobacteria and red algae, the structural basis dictating efficient excitation energy transfer from the phycobilisome (PBS) antenna complex to the reaction centers remains unclear. The PBS has several peripheral rods and a central core that binds to the thylakoid membrane, allowing energy coupling with photosystem II (PSII) and PSI. Here, we have combined chemical cross-linking mass spectrometry with homology modeling to propose a tricylindrical cyanobacterial PBS core structure. Our model reveals a side-view crossover configuration of the two basal cylinders, consolidating the essential roles of the anchoring domains composed of the ApcE PB loop and ApcD, which facilitate the energy transfer to PSII and PSI, respectively. The uneven bottom surface of the PBS core contrasts with the flat reducing side of PSII. The extra space between two basal cylinders and PSII provides increased accessibility for regulatory elements, e.g., orange carotenoid protein, which are required for modulating photochemical activity.

The irradiation of alkyl siloxanes in the adsorbed state. Part 3. The irradiation chemistry of hexamethyldisiloxane adsorbed onto silica

1983 ◽  
Vol 61 (4) ◽  
pp. 729-733
Author(s):  
K-S. Maeng ◽  
G. R. Brown ◽  
G. J. Trudel ◽  
L. E. St-Pierre
Keyword(s):  
Energy Transfer ◽  
Chemical Reactions ◽  
Adsorbed Layer ◽  
Cross Linking ◽  
Adsorbed State ◽  
Γ Irradiation ◽  
Enhanced Production ◽  
Production Of Hydrogen ◽  
Chemical Cross Linking

Enhanced production of hydrogen, methane, and ethane from the γ-irradiation of hexamethyldisiloxane (MM) adsorbed onto silica compared to that from liquid MM results from energy transfer from the solid to the adsorbed layer. Chemical reactions with the surface are shown by deuterated products from the irradiation of MM on a deuterated silica and from extensive chemical cross-linking to the surface. These reactions predominate in the first monolayer of coverage.

scholarly journals Molecular Interactions Driving Intermediate Filament Assembly

Cells ◽  
2021 ◽  
Vol 10 (9) ◽  
pp. 2457
Author(s):  
Pieter-Jan Vermeire ◽  
Giel Stalmans ◽  
Anastasia V. Lilina ◽  
Jan Fiala ◽  
Petr Novak ◽  
...  
Keyword(s):  
Molecular Interactions ◽  
Coiled Coil ◽  
Structural Basis ◽  
Cross Linking ◽  
Cell Physiology ◽  
X Ray Crystallography ◽  
Filament Assembly ◽  
Open Questions ◽  
Near Future ◽  
Chemical Cross Linking

Given the role of intermediate filaments (IFs) in normal cell physiology and scores of IF-linked diseases, the importance of understanding their molecular structure is beyond doubt. Research into the IF structure was initiated more than 30 years ago, and some important advances have been made. Using crystallography and other methods, the central coiled-coil domain of the elementary dimer and also the structural basis of the soluble tetramer formation have been studied to atomic precision. However, the molecular interactions driving later stages of the filament assembly are still not fully understood. For cytoplasmic IFs, much of the currently available insight is due to chemical cross-linking experiments that date back to the 1990s. This technique has since been radically improved, and several groups have utilized it recently to obtain data on lamin filament assembly. Here, we will summarize these findings and reflect on the remaining open questions and challenges of IF structure. We argue that, in addition to X-ray crystallography, chemical cross-linking and cryoelectron microscopy are the techniques that should enable major new advances in the field in the near future.

scholarly journals Antenna arrangement and energy-transfer pathways of PSI–LHCI from the moss Physcomitrella patens

2021 ◽  
Vol 7 (1) ◽  
Author(s):  
Qiujing Yan ◽  
Liang Zhao ◽  
Wenda Wang ◽  
Xiong Pi ◽  
Guangye Han ◽  
...  
Keyword(s):  
Energy Transfer ◽  
Physcomitrella Patens ◽  
Excitation Energy Transfer ◽  
Land Plant ◽  
Light Energy ◽  
Land Plants ◽  
Structural Basis ◽  
Light Harvesting Complex ◽  
Photosynthetic Organisms ◽  
Green Algal

AbstractPlants harvest light energy utilized for photosynthesis by light-harvesting complex I and II (LHCI and LHCII) surrounding photosystem I and II (PSI and PSII), respectively. During the evolution of green plants, moss is at an evolutionarily intermediate position from aquatic photosynthetic organisms to land plants, being the first photosynthetic organisms that landed. Here, we report the structure of the PSI–LHCI supercomplex from the moss Physcomitrella patens (Pp) at 3.23 Å resolution solved by cryo-electron microscopy. Our structure revealed that four Lhca subunits are associated with the PSI core in an order of Lhca1–Lhca5–Lhca2–Lhca3. This number is much decreased from 8 to 10, the number of subunits in most green algal PSI–LHCI, but the same as those of land plants. Although Pp PSI–LHCI has a similar structure as PSI–LHCI of land plants, it has Lhca5, instead of Lhca4, in the second position of Lhca, and several differences were found in the arrangement of chlorophylls among green algal, moss, and land plant PSI–LHCI. One chlorophyll, PsaF–Chl 305, which is found in the moss PSI–LHCI, is located at the gap region between the two middle Lhca subunits and the PSI core, and therefore may make the excitation energy transfer from LHCI to the core more efficient than that of land plants. On the other hand, energy-transfer paths at the two side Lhca subunits are relatively conserved. These results provide a structural basis for unravelling the mechanisms of light-energy harvesting and transfer in the moss PSI–LHCI, as well as important clues on the changes of PSI–LHCI after landing.

Statistical Force-Field for Structural Modeling Using Chemical Cross-Linking/mass Spectrometry Distance Constraints

2018 ◽  
Author(s):  
Allan J. R. Ferrari ◽  
Fabio C. Gozzo ◽  
Leandro Martinez
Keyword(s):  
Mass Spectrometry ◽  
Amino Acid ◽  
Force Field ◽  
Protein Structures ◽  
Protein Structure Determination ◽  
Structural Modeling ◽  
Cross Linking ◽  
Amino Acid Residues ◽  
Distance Constraints ◽  
Chemical Cross Linking

<div><p>Chemical cross-linking/Mass Spectrometry (XLMS) is an experimental method to obtain distance constraints between amino acid residues, which can be applied to structural modeling of tertiary and quaternary biomolecular structures. These constraints provide, in principle, only upper limits to the distance between amino acid residues along the surface of the biomolecule. In practice, attempts to use of XLMS constraints for tertiary protein structure determination have not been widely successful. This indicates the need of specifically designed strategies for the representation of these constraints within modeling algorithms. Here, a force-field designed to represent XLMS-derived constraints is proposed. The potential energy functions are obtained by computing, in the database of known protein structures, the probability of satisfaction of a topological cross-linking distance as a function of the Euclidean distance between amino acid residues. The force-field can be easily incorporated into current modeling methods and software. In this work, the force-field was implemented within the Rosetta ab initio relax protocol. We show a significant improvement in the quality of the models obtained relative to current strategies for constraint representation. This force-field contributes to the long-desired goal of obtaining the tertiary structures of proteins using XLMS data. Force-field parameters and usage instructions are freely available at http://m3g.iqm.unicamp.br/topolink/xlff <br></p></div><p></p><p></p>

scholarly journals Structural basis for heme-dependent NCoR binding to the transcriptional repressor REV-ERBβ

2021 ◽  
Vol 7 (5) ◽  
pp. eabc6479
Author(s):  
Sarah A. Mosure ◽  
Timothy S. Strutzenberg ◽  
Jinsai Shang ◽  
Paola Munoz-Tello ◽  
Laura A. Solt ◽  
...  
Keyword(s):  
Nuclear Receptors ◽  
Binding Mode ◽  
Structural Basis ◽  
Receptor Interaction ◽  
Heme Binding ◽  
Endogenous Ligand ◽  
Interaction Domain ◽  
Response Elements ◽  
Biochemical Assays ◽  
Chemical Cross Linking

Heme is the endogenous ligand for the constitutively repressive REV-ERB nuclear receptors, REV-ERBα (NR1D1) and REV-ERBβ (NR1D2), but how heme regulates REV-ERB activity remains unclear. Cellular studies indicate that heme is required for the REV-ERBs to bind the corepressor NCoR and repress transcription. However, fluorescence-based biochemical assays suggest that heme displaces NCoR; here, we show that this is due to a heme-dependent artifact. Using ITC and NMR spectroscopy, we show that heme binding remodels the thermodynamic interaction profile of NCoR receptor interaction domain (RID) binding to REV-ERBβ ligand-binding domain (LBD). We solved two crystal structures of REV-ERBβ LBD cobound to heme and NCoR peptides, revealing the heme-dependent NCoR binding mode. ITC and chemical cross-linking mass spectrometry reveals a 2:1 LBD:RID stoichiometry, consistent with cellular studies showing that NCoR-dependent repression of REV-ERB transcription occurs on dimeric DNA response elements. Our findings should facilitate renewed progress toward understanding heme-dependent REV-ERB activity.

Sign in / Sign up

Export Citation Format

Share Document