Chemical composition of waters in a former Cu-As mine: water–rock interaction, REE systematics and stability of secondary copper minerals

Author(s):  
Susanne Göb ◽  
Michael Bau ◽  
Gregor Markl
2019 ◽  
Vol 98 ◽  
pp. 01024
Author(s):  
Irina Ivanova

In the central part of Western Siberia a study of the chemical composition of fresh underground waters in the upper 600 m of the Sredneobskoy artesian basin was carried out. It was shown that underground waters generally contain high concentrations of strontium. The minimum concentrations of Sr are typical for Neogene-Quaternary sediments (600 µg/L), maximum values in the waters of the Upper Cretaceous sediments (more than 1300 µg/L). The study of strontium accumulation mechanisms in drinking underground waters is undoubtedly an important issue, as strontium is a biologically active element. Especially dangerous is the consumption of underground waters with a calcium-strontium ratio less than 100, that is the hydrogeochemical precondition for Urov endemic (Kashin-Beck disease). According to the calcium/strontium ratios data waters of the Neogene-Quaternary and Paleogene sediments selected in the south-western part of the Tomsk region are unsuitable for drinking water supply. Underground waters are shown to be in equilibrium with Al and Fe hydroxides; Ca, Mg, Fe carbonates; and clay minerals, including ferruginous. Increased strontium content in aquifers is determined not only by the chemical composition of the water-bearing rocks, but also increasing resident time of water rock interaction.


2019 ◽  
Vol 98 ◽  
pp. 01054
Author(s):  
Elena Zippa ◽  
Ivan Bragin ◽  
George Chelnokov ◽  
Natalia Kharitonova

Chemical composition and saturation degree of the Annenskiy thermal waters to minerals of water-bearing rock have been considered in the manuscript. It is shown that the thermal waters are low mineralized, alkaline and belong to HCO3-Na type. The thermal waters-rock system is equilibrium-nonequilibrium. It means that the waters dissolve primary minerals continuously, never reaching saturation (anorthite, K-field spar and etc.), and form new secondary mineral phases simultaneously, reaching saturation (gibbsite, montmorillonite, albite and etc.). Besides, peculiarities of the equilibrium with minerals of water-bearing rocks for surface and ground waters of the studied region was considered. It is established that the thermal waters are ahead of surface and ground waters and represent the certain stage of the water-rock system evolution. The stage is characterized by the certain chemical composition (TDS=148-317 mg/L, HCO3-Na, SiO2=9-80 mg/L), complex of secondary minerals (calcite, albite, laumontite and etc.) and special geochemical environment (pH 8.2-8.6).


2012 ◽  
Vol 16 (1) ◽  
pp. 157-166 ◽  
Author(s):  
I. Delgado-Outeiriño ◽  
P. Araujo-Nespereira ◽  
J. A. Cid-Fernández ◽  
J. C. Mejuto ◽  
E. Martínez-Carballo ◽  
...  

Abstract. Hydrothermic features in Galicia (northwest Spain) have been used since ancient times for therapeutic purposes. A characterization of these thermal waters was carried out in order to understand their behaviour based on inorganic pattern and water-rock interaction mechanisms. In this way 15 thermal water samples were collected in the same hydrographical system. The selected thermal water samples were classified using principal component analysis (PCA) and partial least squares (PLS) regression analysis in two groups according to their chemical composition: group I with the young water samples and group II with the samples with longest water-rock contact time. This classification agreed with the results obtained by the use of geothermometers and hydrogeochemical modelling, where the samples were classified into two categories according their residence time in the reservoir and their water-rock interaction.


2021 ◽  
Author(s):  
Binbin Jiang ◽  
Ju Gao ◽  
Kun Du ◽  
Xu Deng ◽  
Kai Zhang

Abstract The process of water rock interaction and the purification mechanism of mine water quality were not clear after being stored in underground reservoir. This study based on the analysis of the hydrochemical characteristics of the reservoir water samples and the characterization of the rock samples, combined with PHREEQC analysis, the mechanism of water quality purification of mine water was discussed. The results showed that the rocks in the underground reservoir had layered silicate structure and flaky kaolinite structure, with some irregular edges and micro cracks, and higher specific surface area and total pore volume. These characteristics made the rocks had a certain adsorption and removal capacity for heavy metal ions and other pollutants in the mine water. The water rock interaction, such as the dissolution of albite and halite, the precipitation of gypsum and kaolinite, and the cation exchange, resulted in the increase of the concentration of Na+ and the decrease of the concentration of Ca2+, Mg2+ and TDS in the outlet water. This study also showed that PHREEQC analysis can be used to analyze the water rock interaction of coal mine underground reservoir and obtained more detailed information.


Author(s):  
Peter Möller ◽  
Marco De Lucia ◽  
Eliahu Rosenthal ◽  
Nimrod Inbar ◽  
Elias Salameh ◽  
...  

In the Lower Yarmouk Gorge the chemical composition of regional, fresh to brackish, mostly thermal groundwater reveal a zonation in respect to salinization and geochemical evolution, which is seemingly controlled by the Lower Yarmouk fault (LYF) but does not strictly follow the morphological Yarmouk Gorge. South of LYF the artesian Mukeihbeh well field produces in its central segment groundwaters of almost pure basaltic-rock type with low contribution (<0.3 vol-%) of Tertiary brine, hosted in deep Cretaceous and Jurassic formations. Further distal, the contribution of limestone water increases originating from the Ajloun Mts. North of the LYF, the Mezar wells, the springs of Hammat Gader and Ain Himma produce dominantly limestone water, which contains 0.14-3 vol-% of the Tertiary brine and possess hence variable salinity. The total dissolved equivalents of solutes gained by water/rock interaction (WRI) and mixing with brine, TDE(WRI+brine), amounts to 10-70 % in the region comprising the Mukheibeh field, Ain Himma and Mezar 3 well, to 55-70 % in the springs of Hammat Gader, and to 80-90 % in wells Mezar 1 and 2. The type of salinization indicates that the Lower Yarmouk fault seemingly acts as the divide between the Ajloun and the Golan Heigths dominated groundwater.


2021 ◽  
Vol 26 (1(38)) ◽  
pp. 149-168
Author(s):  
D. V. Melkonyan ◽  
E. A. Cherkez ◽  
V. G. Tyuremina

Problem Statement and purpose. The study area encompassing the territory of about 150 km2, in August 2000, was declared as a zone of environmental emergency due to increasing pollution rates in shallow groundwater, in surface water and to health deterioration of the inhabitants of some settlements. Groundwater is widely used by the local population in numerous boreholes for domestic and agricultural purposes. In the zone of environmental emergency there are about 35 anthropogenic objects, such as: industrial and domestic landfills, pesticide and fertilizer storage, various livestock farm complexes, settling tanks, wastewater and solid waste discharges, etc. The insecurity of shallow groundwater, also its location close to the surface and in the lowest parts of the terrain leads to intensive pollution of groundwater. Besides, groundwater in relation to the fractured waters of the Precambrian crystalline rocks, which lie below and are used for drinking water supply, perform the functions of both a protective screen and a source of pollution. In this case, a multifaceted study of shallow groundwater chemical composition and their formation conditions is a priority task of this study for the environmental emergency zone and for the district as a whole. The purpose of this paper to study the chemical composition and to establish the processes and factors controlling the shallow groundwater chemistry in modern and Pleistocene sediments of the Southern Bug and Syniukha interfluve. Data and Methods. A total of 102 water samples were collected from groundwater wells and boreholes and were hydrochemically analyzed for their macrocomponent composition. Groundwater quality geochemical assessment was carried out using statistical methods in combination with conventional graphical methods by examining groundwater in the Boleslavchik village, where they are most polluted. Results. The dominant hydrochemical types of shallow groundwater are SO4- Na, HCO3-Na and mixed SO4-Mg-Na, SO4-Ca-Na types, sometimes NO3-HCO3 and NO3-Cl-Na types. These groundwater types are formed under the influence of natural and anthropogenic factors, such as water-rock interaction, evaporation-crystallization, precipitation and anthropogenic impact. In this case, water-rock interaction processes, such as silicate weathering, carbonate and sulfate dissolution, ion exchange, evaporation-crystallization and anthropogenic impact play major roles. The weathering of feldspars, chlorites and dissolution of calcites, dolomites are the primary sources for Na+, K+, Mg2+, Ca2+ ions, and dissolution of gypsum, sulfide mineralization for SO4 2– ions. High concentrations of Na+, Cl–, SO4 2–, NO3 – in shallow groundwater reflect agricultural activity as the main source of these ions.


2019 ◽  
Vol 98 ◽  
pp. 07012
Author(s):  
Marina Kolpakova

Major ion and trace elements chemistry of fifty-eight water samples of southern part of Western Siberia (Russia) were analysed with a suite of statistical techniques (using R programming language), in an effort to explain the key processes affecting chemical composition of saline lakes. The database included data about well, river, and lake waters and groundwater. According to performed cluster analysis of chemical data, all lakes in the area can be divided in to 5 main groups and their chemical composition very similar to rivers and deep groundwater. Shallow groundwaters are more enriched in Ca2+ and Mg2+. Principal component analysis (PCA) identified four main principal components, with the first principal component (PC1) accounting for 44.3% and representing the process of salinization, and PC2 and PC3 (17.9 and 8.6% of total variance) controlled by water-rock interaction process of carbonates/sulphates precipitation and aluminosilicates formation.


Sign in / Sign up

Export Citation Format

Share Document