scholarly journals Active faulting controls bedform development on a deep-water fan

Geology ◽  
2021 ◽  
Author(s):  
Vittorio Maselli ◽  
Aaron Micallef ◽  
Alexandre Normandeau ◽  
Davide Oppo ◽  
David Iacopini ◽  
...  
Keyword(s):  
Flow Velocity ◽  
Deep Water ◽  
Eastern Mediterranean ◽  
Hanging Wall ◽  
Normal Fault ◽  
Turbidity Currents ◽  
Seismic Reflection Data ◽  
Reflection Data ◽  
Levant Basin ◽  
Seismic Scale

Tectonically controlled topography influences deep-water sedimentary systems. Using 3-D seismic reflection data from the Levant Basin, eastern Mediterranean Sea, we investigate the spatial and temporal evolution of bedforms on a deep-water fan cut by an active normal fault. In the footwall, the fan comprises cyclic steps and antidunes along its axial and external portions, respectively, which we interpret to result from the spatial variation in flow velocity due to the loss of confinement at the canyon mouth. Conversely, in the hanging wall, the seafloor is nearly featureless at seismic scale. Numerical modeling of turbidity currents shows that the fault triggers a hydraulic jump that suppresses the flow velocity downstream, which thus explains the lack of visible bedforms basinward. This study shows that the topography generated by active normal faulting controls the downslope evolution of turbidity currents and the associated bedforms and that seafloor geomorphology can be used to evince syn-tectonic deposition.

Basement-involved inversion at the Appalachian structural front, western Newfoundland: an interpretation of seismic reflection data with implications for petroleum prospectivity

2004 ◽  
Vol 52 (3) ◽  
pp. 215-233 ◽  
Author(s):  
Glen S. Stockmal ◽  
Art Slingsby ◽  
John W.F. Waldron
Keyword(s):  
Seismic Reflection ◽  
Hanging Wall ◽  
Normal Fault ◽  
Hydrocarbon Exploration ◽  
Normal Faults ◽  
Apparent Magnitude ◽  
Seismic Reflection Data ◽  
The Public ◽  
Reflection Data ◽  
New Interpretation

Abstract Recent hydrocarbon exploration in western Newfoundland has resulted in six new wells in the Port au Port Peninsula area. Port au Port No.1, drilled in 1994/95, penetrated the Cambro-Ordovician platform and underlying Grenville basement in the hanging wall of the southeast-dipping Round Head Thrust, terminated in the platform succession in the footwall of this basement-involved inversion structure, and discovered the Garden Hill petroleum pool. The most recent well, Shoal Point K-39, was drilled in 1999 to test a model in which the Round Head Thrust loses reverse displacement to the northeast, eventually becoming a normal fault. This model hinged on an interpretation of a seismic reflection survey acquired in 1996 in Port au Port Bay. This survey is now in the public domain. In our interpretation of these data, the Round Head Thrust is associated with another basement-involved feature, the northwest-dipping Piccadilly Bay Fault, which is mapped on Port au Port Peninsula. Active as normal faults in the Taconian foreland, both these faults were later inverted during Acadian orogenesis. The present reverse offset on the Piccadilly Bay Fault was previously interpreted as normal offset on the southeast-dipping Round Head Thrust. Our new interpretation is consistent with mapping on Port au Port Peninsula and north of Stephenville, where all basement-involved faults are inverted and display reverse senses of motion. It also explains spatially restricted, enigmatic reflections adjacent to the faults as carbonate conglomerates of the Cape Cormorant Formation or Daniel’s Harbour Member, units associated with inverted thick-skinned faults. The K-39 well, which targeted the footwall of the Round Head Thrust, actually penetrated the hanging wall of the Piccadilly Bay Fault. This distinction is important because the reservoir model invoked for this play involved preferential karstification and subsequent dolomitization in the footwalls of inverted thick-skinned faults. The apparent magnitude of structural inversion across the Piccadilly Bay Fault suggests other possible structural plays to the northeast of K-39.

scholarly journals Sevier Fault at Red Canyon

Geosites ◽  
2019 ◽  
Vol 1 ◽  
pp. 1-6
Author(s):  
Robert Biek
Keyword(s):  
Lava Flow ◽  
Fault Zone ◽  
Hanging Wall ◽  
Slip Rate ◽  
Normal Fault ◽  
Coarse Grained ◽  
Seismic Reflection Data ◽  
The North ◽  
Total Displacement ◽  
Reflection Data

The Sevier fault is spectacularly displayed on the north side of Utah Highway 12 at the entrance to Red Canyon, where it offsets a 500,000-year-old basaltic lava flow. The fault is one of several active, major faults that break apart the western margin of the Colorado Plateau in southwestern Utah. The Sevier fault is a “normal” fault, a type of fault that forms during extension of the earth’s crust, where one side of the fault moves down relative to the other side. In this case, the down-dropped side (the hanging wall) is west of the fault; the upthrown side (the footwall) lies to the east. The contrasting colors of rocks across the fault make the fault stand out in vivid detail. Immediately south of Red Canyon, the 5-million-year-old Rock Canyon lava flow, which erupted on the eastern slope of the Markagunt Plateau, flowed eastward and crossed the fault (which at the time juxtaposed non-resistant fan alluvium against coarse-grained volcaniclastic deposits) (Biek and others, 2015). The flow is now offset 775 to 1130 feet (235-345 m) along the main strand of the fault, yielding an anomalously low vertical slip rate of about 0.05 mm/yr (Lund and others, 2008). However, this eastern branch of the Sevier fault accounts for only part of the total displacement on the fault zone. A concealed, down-to-the-west fault is present west of coarse-grained volcaniclastic strata at the base of the Claron cliffs. Seismic reflection data indicate that the total displacement on the fault zone in this area is about 3000 feet (900 m) (Lundin, 1987, 1989; Davis, 1999).

Normal fault growth and segment linkage in a gravitationally detached delta system: evidence from 3D seismic reflection data from the Ceduna Sub-basin, Great Australian Bight

2015 ◽  
Vol 55 (2) ◽  
pp. 467
Author(s):  
Alexander Robson ◽  
Rosalind King ◽  
Simon Holford
Keyword(s):  
Seismic Reflection ◽  
Fault Plane ◽  
Structural Evolution ◽  
Normal Fault ◽  
Fault System ◽  
Seismic Reflection Data ◽  
Reflection Data ◽  
Listric Fault ◽  
Dip Angle ◽  
Fault Growth

The authors used three-dimensional (3D) seismic reflection data from the central Ceduna Sub-Basin, Australia, to establish the structural evolution of a linked normal fault assemblage at the extensional top of a gravitationally driven delta system. The fault assemblage presented is decoupled at the base of a marine mud from the late Albian age. Strike-linkage has created a northwest–southeast oriented assemblage of normal fault segments and dip-linkage through Santonian strata, which connects a post-Santonian normal fault system to a Cenomanian-Santonian listric fault system. Cenomanian-Santonian fault growth is on the kilometre scale and builds an underlying structural grain, defining the geometry of the post-Santonian fault system. A fault plane dip-angle model has been created and established through simplistic depth conversion. This converts throw into fault plane dip-slip displacement, incorporating increasing heave of a listric fault and decreasing in dip-angle with depth. The analysis constrains fault growth into six evolutionary stages: early Cenomanian nucleation and radial growth of isolated fault segments; linkage of fault segments by the latest Cenomanian; latest Santonian Cessation of fault growth; erosion and heavy incision during the continental break-up of Australia and Antarctica (c. 83 Ma); vertically independent nucleation of the post-Santonian fault segments with rapid length establishment before significant displacement accumulation; and, continued displacement into the Cenozoic. The structural evolution of this fault system is compatible with the isolated fault model and segmented coherent fault model, indicating that these fault growth models do not need to be mutually exclusive to the growth of normal fault assemblages.

scholarly journals The Ogooue Fan (offshore Gabon): a modern example of deep-sea fan on a complex slope profile

Solid Earth ◽  
2019 ◽  
Vol 10 (3) ◽  
pp. 851-869 ◽  
Author(s):  
Salomé Mignard ◽  
Thierry Mulder ◽  
Philippe Martinez ◽  
Thierry Garlan
Keyword(s):  
Deep Sea ◽  
Sedimentary Facies ◽  
Turbidity Currents ◽  
Slope Gradient ◽  
Seismic Reflection Data ◽  
Fine Grained ◽  
Reflection Data ◽  
Deposition Processes ◽  
Sea Fan ◽  
The Impact

Abstract. The effects of changes in slope gradient on deposition processes and architecture have been investigated in different deep-sea systems both in modern and ancient environments. However, the impact of subtle gradient changes (< 0.3∘) on sedimentary processes along deep-sea fans still needs to be clarified. The Ogooue Fan, located in the northeastern part of the Gulf of Guinea, extends over more than 550 km westwards of the Gabonese shelf and passes through the Cameroon volcanic line. Here, we present the first study of acoustic data (multibeam echosounder and 3.5 kHz, very high-resolution seismic data) and piston cores covering the deep-sea part of this West African system. This study documents the architecture and sedimentary facies distribution along the fan. Detailed mapping of near-seafloor seismic-reflection data reveals the influence of subtle slope gradient changes (< 0.2∘) along the fan morphology. The overall system corresponds to a well-developed deep-sea fan, fed by the Ogooue River sedimentary load, with tributary canyons, distributary channel–levee complexes and lobe elements. However, variations in the slope gradient due to inherited salt-related structures and the presence of several seamounts, including volcanic islands, result in a topographically complex slope profile including several ramps and steps. In particular, turbidity currents derived from the Gabonese shelf deposit cross several interconnected intra-slope basins located on the low gradient segments of the margin (< 0.3∘). On a higher gradient segment of the slope (0.6∘), a large mid-system valley developed connecting an intermediate sedimentary basin to the more distal lobe area. Distribution and thickness of turbidite sands is highly variable along the system. However, turbidite sands are preferentially deposited on the floor of the channel and the most proximal depositional areas. Core description indicates that the upper parts of the turbidity flows, mainly composed of fine-grained sediments, are found in the most distal depocenters.

scholarly journals How do tectonics influence the initiation and evolution of submarine canyons A case study from the Otway Basin, SE Australia

2021 ◽  
Author(s):  
Nan Wu ◽  
Harya Nugraha ◽  
Michael Steventon ◽  
Fa Zhong
Keyword(s):  
Late Miocene ◽  
Submarine Canyon ◽  
Turbidity Currents ◽  
Submarine Canyons ◽  
Seismic Reflection Data ◽  
Reflection Data ◽  
Depositional Processes ◽  
Seabed Topography ◽  
Gravity Driven ◽  
Unconformity Surface

The architecture of canyon-fills can provide a valuable record of the link between tectonics, sedimentation, and depositional processes in submarine settings. We integrate 3D and 2D seismic reflection data to investigate the dominant tectonics and sedimentary processes involved in the formation of two deeply buried (c. 500 m below seafloor), and large (c. 3-6 km wide, >35 km long) Late Miocene submarine canyons. We found the plate tectonic-scale events (i.e. continental breakup and shortening) have a first-order influence on the submarine canyon initiation and evolution. Initially, the Late Cretaceous (c. 65 Ma) separation of Australia and Antarctica resulted in extensional fault systems, which then formed stair-shaped paleo-seabed. This inherited seabed topography allowed gravity-driven processes (i.e. turbidity currents and mass-transport complexes) to occur. Subsequently, the Late Miocene (c. 5 Ma) collision of Australia and Eurasia, and the resulting uplift and exhumation, have resulted in a prominent unconformity surface that coincides with the base of the canyons. We suggest that the Late Miocene intensive tectonics and associated seismicity have resulted in instability in the upper slope that consequently gave rise to emplacement of MTCs, initiating the canyons formation. Therefore, we indicate that regional tectonics play a key role in the initiation and development of submarine canyons.

EVOLUTION AND MORPHOLOGY OF RAFTED BLOCKS IN AN ANCIENT DEEPWATER MASS TRANSPORT COMPLEX (EXMOUTH PLATEAU, OFFSHORE NW AUSTRALIA)

2020 ◽  
pp. 1-67 ◽  
Author(s):  
Ovie Emmanuel Eruteya ◽  
Yakufu Niyazi ◽  
Kamaldeen Olakunle Omosanya ◽  
Daniel Ierodiaconou ◽  
Andrea Moscariello
Keyword(s):  
Mass Transport ◽  
Deep Water ◽  
High Amplitude ◽  
3D Seismic ◽  
Complex Flow ◽  
Seismic Reflection Data ◽  
Exmouth Plateau ◽  
Reflection Data ◽  
Transport Complex ◽  
Nw Australia

Submarine mass wasting plays a fundamental role in transporting substantial volumes of sediments basinward including gigantic slide blocks. However, the understanding of processes involved in block generation and their associated deformation until flow arrest remains limited, especially in data-starved deep-water settings. Here a 2D and 3D seismic reflection data from the Exmouth Plateau, offshore NW Australia is used to investigate the architecture of large blocks preserved within an ancient mass transport complex (MTC) and their interaction with the basal shear surface (BSS). The evolution of the investigated MTC (MTC-BDF) is related to instability along the flanks of an underlying bifurcative Miocene canyon. MTC-BDF spans ∼75 km by ∼35 km containing at least 32 well-imaged blocks (within the 3D seismic coverage) encapsulated in a well-deformed debrite background. These carbonate blocks interpreted as rafted blocks have lengths ranging from 0.48 km to 3.40 km with thicknesses reaching up to 165 m. Interestingly, the blocks are more abundant in a region characterized by moderate-high amplitude debrites. Erosional morphologies encompassing a unique groove and other circular to irregular-shaped depressions mapped along the BSS provide evidence for the erosive nature of the flow. The origin of the groove is related transported blocks gouging the BSS. Importantly, intra block deformations recorded within these blocks as fault and fold systems suggest a complex flow regime within MTC-BDF, with the deformations arising either during block translation or also possibly upon the arrest of the failed mass in interaction with bathymetric elements. Our findings suggest inherent deformations within these blocks may serve as high-permeability conduits with implications for deep-water drilling operations within this segment of the Exmouth Plateau and elsewhere in other hydrocarbon-rich deep-water settings.

Application of section-balancing techniques to deep seismic reflection data from offshore eastern Canada: preliminary observations

1990 ◽  
Vol 27 (4) ◽  
pp. 494-500 ◽  
Author(s):  
M. C. Dentith ◽  
J. Hall
Keyword(s):  
Seismic Reflection ◽  
Hanging Wall ◽  
Shear Zones ◽  
Ductile Deformation ◽  
Eastern Canada ◽  
Seismic Reflection Data ◽  
Deep Seismic Reflection ◽  
Grand Banks ◽  
Jeanne D'arc Basin ◽  
Reflection Data

The application of section-balancing techniques to the analysis of deep seismic sections requires account be taken of isostasy and ductile-deformation processes. Structures imaged by deep seismic reflection profiling across the southern Grand Banks, offshore eastern Canada, are analyzed in this way. Correlations of dipping events in the deep crust, interpreted as shear zones, with faults recognized in the shallow part of the section are tested by attempting to restore the sections to their undeformed state by reversing the displacements on the faults. This process tests the geometric compatibility of the interpreted fault and the structures in its hanging wall. Our models suggest that the faults bounding the Whale and Horseshoe basins detach at the Mohorovičić discontinuity. In contrast, the fault bounding the Jeanne d'Arc Basin detaches within the lower crust.

Sign in / Sign up

Export Citation Format

Share Document