scholarly journals Age and mantle sources of Quaternary basalts associated with “leaky” transform faults of the migrating Anatolia-Arabia-Africa triple junction

Geosphere ◽  
2020 ◽  
Author(s):  
Michael A. Cosca ◽  
Mary Reid ◽  
Jonathan R. Delph ◽  
Gençalioğlu Kuşcu Gonca ◽  
Janne Blichert-Toft ◽  
...  

The Anatolia (Eurasia), Arabia, and Africa tec­tonic plates intersect in southeast Turkey, near the Gulf of İskenderun, forming a tectonically active and unstable triple junction (the A3 triple junction). The plate boundaries are marked by broad zones of major, dominantly left-lateral transform faults including the East Anatolian fault zone (the Anato­lia-Arabia boundary) and the Dead Sea fault zone (the Arabia-Africa boundary). Quaternary basalts occur locally within these “leaky” transform fault zones (similar to those observed within oceanic transform faults), providing evidence that mantle melting, basalt genesis, and eruption are linked to crustal deformation and faulting that extends into the upper mantle. We investigated samples of alkaline basalt (including basanite) from the Toprakkale and Karasu volcanic fields within a broad zone of transtension associated with these plate-boundary faults near the İskenderun and Amik Basins, respectively. Toprakkale basalts and basanites have 40Ar/39Ar plateau ages ranging from 810 ± 60 ka to 46 ± 13 ka, and Karasu volcanic field basalts have 40Ar/39Ar plateau ages ranging from 2.63 ± 0.17 Ma to 52 ± 16 ka. Two basanite samples within the Toprak­kale volcanic field have isotopic characteristics of a depleted mantle source, with 87Sr/86Sr of 0.703070 and 0.703136, 143Nd/144Nd of 0.512931 and 0.512893, 176Hf/177Hf of 0.283019 and 0.282995, 206Pb/204Pb of 19.087 and 19.155, and 208Pb/204Pb of 38.861 and 38.915. The 176Hf/177Hf ratios of Toprakkale basalts (0.282966–0.283019) are more radiogenic than Karasu basalts (0.282837–0.282965), with some overlap in 143Nd/144Nd ratios (0.512781–0.512866 vs. 0.512648–0.512806). Toprakkale 206Pb/204Pb ratios (19.025 ± 0.001) exhibit less variation than that observed for Karasu basalts (18.800–19.324), and 208Pb/204Pb values for Toprakkale basalts (38.978– 39.103) are slightly lower than values for Karasu basalts (39.100–39.219). Melting depths estimated for the basalts from both volcanic fields gener­ally cluster between 60 and 70 km, whereas the basanites record melting depths of ~90 km. Depth estimates for the basalts largely correspond to the base of a thin lithosphere (~60 km) observed by seismic imaging. We interpret the combined radio­genic isotope data (Sr, Nd, Hf, Pb) from all alkaline basalts to reflect partial melting at the base of the lithospheric mantle. In contrast, seismic imaging indicates a much thicker (>100 km) lithosphere beneath southern Anatolia, a substantial part of which is likely subducted African lithosphere. This thicker lithosphere is adjacent to the surface loca­tions of the basanites. Thus, the greater melting depths inferred for the basanites may include par­tial melt contributions either from the lithospheric mantle of the attached and subducting African (Cyprean) slab, or from partial melting of detached blocks that foundered due to convective removal of the Anatolian lithosphere and that subsequently melted at ~90 km depth within the asthenosphere. The Quaternary basalts studied here are restricted to a broad zone of transtension formed in response to the development of the A3 triple junction, with an earliest erupted age of 2.63 Ma. This indicates that the triple junction was well established by this time. While the current posi­tion of the A3 triple junction is near the Amik Basin, faults and topographic expressions indicate that inception of the triple junction began as early as 5 Ma in a position farther to the northeast of the erupted basalts. Therefore, the position of the A3 triple junction appears to have migrated to the southwest since the beginning of the Pliocene as the Anatolia-Africa plate boundary has adjusted to extrusion (tectonic escape) of the Anatolia plate. Establishment of the triple junction over the past 5 m.y. was synchronous with rollback of the Afri­can slab beneath Anatolia and associated trench retreat, consistent with Pliocene uplift in Cyprus and with the current positions of plate boundaries. The A3 triple junction is considered to be unstable and likely to continue migrating to the southwest for the foreseeable geologic future.

2019 ◽  
Vol 56 (12) ◽  
pp. 1297-1308 ◽  
Author(s):  
Jeffrey A. Karson ◽  
Bryndís Brandsdóttir ◽  
Páll Einarsson ◽  
Kristján Sæmundsson ◽  
James A. Farrell ◽  
...  

Major transform fault zones link extensional segments of the North American – Eurasian plate boundary as it transects the Iceland Hotspot. Changes in plate boundary geometry, involving ridge jumps, rift propagation, and related transform fault zone migration, have occurred as the boundary has moved relative to the hotspot. Reconfiguration of transform fault zones occurred at about 6 Ma in northern Iceland and began about 3 Ma in southern Iceland. These systems show a range of different types of transform fault zones, ranging from diffuse, oblique rift zones to narrower, well-defined, transform faults oriented parallel to current plate motions. Crustal deformation structures correlate with the inferred duration and magnitude of strike-slip displacements. Collectively, the different expressions of transform zones may represent different stages of development in an evolutionary sequence that may be relevant for understanding the tectonic history of plate boundaries in Iceland as well as the structure of transform fault zones on more typical parts of the mid-ocean ridge system.


2020 ◽  
Author(s):  
M.A. Cosca ◽  
et al.

Table of published geochemical and isotopic data and pressure estimates for volcanic rocks of the Toprakkale and Karasu volcanic fields.


2010 ◽  
Vol 10 ◽  
pp. 4-13 ◽  
Author(s):  
L. McNeill ◽  
D. Saffer ◽  
T. Byrne ◽  
E. Araki ◽  
S. Toczko ◽  
...  

The Nankai Trough Seismogenic Zone Experiment (NanTroSEIZE) is a major drilling project designed to investigate fault mechanics and the seismogenic behavior of subduction zone plate boundaries. Expedition 319 is the first riser drilling operation within scientific ocean drilling. Operations included riser drilling at Site C0009 in the forearc basin above the plate boundary fault, non-riser drilling at Site C0010 across the shallow part of the megasplay fault system &ndash; which may slip during plate boundary earthquakes &ndash; and initial drilling at Site C0011 (incoming oceanic plate) for Expedition 322. At Site C0009, new methods were tested, including analysis of drill mud cuttings and gas, and <i>in situ</i> measurements of stress, pore pressure, and permeability. These results, in conjunction with earlier drilling, will provide (a) the history of forearc basin development (including links to growth of the megasplay fault system and modern prism), (b) the first <i>in situ</i> hydrological measurements of the plate boundary hanging wall, and (c) integration of <i>in situ</i> stress measurements (orientation and magnitude) across the forearc and with depth. A vertical seismic profile (VSP) experiment provides improved constraints on the deeper structure of the subduction zone. At Site C0010, logging-while-drilling measurements indicate significant changes in fault zone and hanging wall properties over short (< 5 km) along-strike distances, suggesting different burial and/or uplift history. The first borehole observatory instruments were installed at Site C0010 to monitor pressure and temperature within the megasplay fault zone, and methods of deployment of more complex observatory instruments were tested for future operations. <br><br> doi:<a href="http://dx.doi.org/10.2204/iodp.sd.10.01.2010" target="_blank">10.2204/iodp.sd.10.01.2010</a>


2020 ◽  
Author(s):  
M.A. Cosca ◽  
et al.

Table of published geochemical and isotopic data and pressure estimates for volcanic rocks of the Toprakkale and Karasu volcanic fields.


Geosphere ◽  
2021 ◽  
Author(s):  
Greg A. Valentine ◽  
Michael H. Ort ◽  
Joaquín A. Cortés

The southwestern United States contains numerous monogenetic basaltic volcanoes distributed in intraplate volcanic fields. We review, on a regional scale, our current understanding of the Quaternary basalts with a focus on aspects pertinent to hazard assessment, such as physical volcanology and geochronology, while also summarizing the several petrogenetic concep­tual models that have been proposed for the range of local tectonic settings in the region. We count 2229 volcanoes in 37 volcanic fields (including the Pinacate volcanic field, which is mostly in northern Sonora, Mexico). Volcanic landforms are dominantly scoria cones and ramparts with attendant lava fields that have a spectrum of ‘a’ā and blocky to pāhoehoe morphologies, while a small percentage of the volcanoes are maars and tuff cones. Explosive eruption styles that were driven mainly by magmatic volatiles, where they have been studied in detail, included Hawaiian, Strombolian, violent Strombolian, and sub-Plinian activity. The latter two have resulted in sub­stantial fallout deposits that can be traced tens of kilometers from source vents. Phreatomagmatic styles have produced pyroclastic current (mainly pyroclastic surges), ballistic, and fallout deposits. These eruption styles pose hazards to humans when they occur in populated areas and to air travel and regional infrastructure even in sparsely populated areas. All but one of the major volcanic fields (fields that contain ~100 or more Quaternary volcanoes) together form a northwest-southeast–trending band, which we suggest may reflect an influence of plate-boundary-related shearing on melt segregation in the upper mantle along with other factors; this view is consistent with recent global positioning system (GPS) and structural geologic data indicating the influence of dextral motion along the North America-Pacific plate boundary deep inside the Southwest. Of the 2229 Quaternary volcanoes identified, ~548 (25%) have been dated, and only ~15% have been dated with methods such as 40Ar/39Ar and cosmogenic surface exposure methods that are considered optimal for young basalts. Acknowledging the large uncertainty due to the poor geochronological data coverage, we use a simple Poisson model to pro­vide a first-order estimate of recurrence rates of monogenetic volcanoes on the scale of the region as a whole; recurrence rates using our compiled age data set range from 3.74 × 10−4 yr−1 to 8.63 × 10−4 yr−1. These values are only based on dated and mapped volcanoes, respectively, and do not account for undated and buried volcanoes or other uncertainties in the volcano count. The time between monogenetic eruptions in the Southwest is similar to the repose times of some polygenetic volcanoes, which suggests that the regional hazard is potentially commensurate with the hazard from a reawakening stratovolcano such as those in the Cascade Range. Notable in our review is that only a few volcanoes have been the subject of physical volcanological characterization, interpretation, and detailed petrologic study that may elu­cidate factors such as magma generation, ascent (including time scales), and controls on eruption style.


Author(s):  
Ze-Zhou Wang ◽  
Sheng-Ao Liu

Abstract Intraplate basaltic volcanism commonly exhibits wide compositional ranges from silica-undersaturated alkaline basalts to silica-saturated tholeiitic basalts. Possible mechanisms for the compositional transition involve variable degrees of partial melting of a same source, decompression melting at different mantle depths (so-called “lid effect”), and melt-peridotite interaction. To discriminate between these mechanisms, here we investigated major-trace elemental and Sr-Nd-Mg-Zn isotopic compositions of a suite of intraplate alkaline and tholeiitic basalts from the Datong volcanic field in eastern China. Specifically, we employed Mg and Zn isotope systematics to assess whether the silica-undersaturated melts originated from a carbonated mantle source. The alkaline basalts have young HIMU-like Sr and Nd isotopic compositions, lower δ26Mg (-0.42‰ to -0.38‰) and higher δ66Zn (0.40‰ to 0.46‰) values relative to the mantle. These characteristics were attributable to an asthenospheric mantle source hybridized by carbonated melts derived from the stagnant Pacific slab in the mantle transition zone. From alkaline to tholeiitic basalts, δ26Mg gradually increases from -0.42‰ to -0.28‰ and δ66Zn decreases from 0.46‰ to 0.28‰ with decreasing alkalinity and incompatible trace element abundances (e.g. Rb, Nb, Th and Zr). The Mg and Zn isotopic variations are significantly beyond the magnitude (&lt;0.1‰) induced by different degrees of fractional crystallization and partial melting of a same mantle source, excluding different degree of partial melting and the “lid effect” as possible mechanisms accounting for the compositional variations in the Datong basalts. There are strong, near-linear correlations of δ26Mg and δ66Zn with 87Sr/86Sr (R2=0.75 − 0.81) and 143Nd/144Nd (R2=0.83 − 0.90), suggesting an additional source for the Datong basalts. This source is characterized by pristine mantle-like δ26Mg and δ66Zn values as well as EM1-like Sr-Nd isotopic ratios, pointing towards a metasomatized subcontinental lithospheric mantle (SCLM). Isotope mixing models show that mingling between alkaline basaltic melts and partial melts from the SCLM imparts all the above correlations, which means that the SCLM must have been partially melted during melt-SCLM reaction. Our results underline that interaction between carbonated silica-undersaturated basaltic melts and the SCLM acts as one of major processes leading to the compositional diversity in intracontinental basaltic volcanism.


Geology ◽  
2021 ◽  
Author(s):  
Pengcheng Shi ◽  
Meng (Matt) Wei ◽  
Robert A. Pockalny

Oceanic transform faults are a significant component of the global plate boundary system and are well known for generating fewer and smaller earthquakes than expected. Detailed studies at a handful of sites support the hypothesis that an abundance of creeping segments is responsible for most of the observed deficiency of earthquakes on those faults. We test this hypothesis on a global scale. We relocate Mw ⩾5 earthquakes on 138 oceanic transform faults around the world and identify creeping segments on these faults. We demonstrate that creeping segments occur on almost all oceanic transform faults, which could explain their deficiency of earthquakes. We also find that most of the creeping segments are not associated with any large-scale geological structure such as a fault step-over, indicating that along-strike variation of fault zone properties may be the main reason for their existence.


Author(s):  
Jia Chang ◽  
Andreas Audétat ◽  
Jian-Wei Li

Abstract Two suites of amphibole-rich mafic‒ultramafic rocks associated with the voluminous intermediate to felsic rocks in the Early Cretaceous Laiyuan intrusive-volcanic complex (North China Craton) are studied here by detailed petrography, mineral- and melt inclusion chemistry, and thermobarometry to demonstrate an in-situ reaction-replacement origin of the hornblendites. Moreover, a large set of compiled and newly obtained geochronological and whole-rock elemental and Sr-Nd isotopic data are used to constrain the tectono-magmatic evolution of the Laiyuan complex. Early mafic‒ultramafic rocks occur mainly as amphibole-rich mafic‒ultramafic intrusions situated at the edge of the Laiyuan complex. These intrusions comprise complex lithologies of olivine-, pyroxene- and phlogopite-bearing hornblendites and various types of gabbroic rocks, which largely formed by in-situ crystallization of hydrous mafic magmas that experienced gravitational settling of early-crystallized olivine and clinopyroxene at low pressures of 0.10‒0.20 GPa (∼4‒8 km crustal depth); the hornblendites formed in cumulate zones by cooling-driven crystallization of 55‒75 vol% hornblende, 10‒20 vol% orthopyroxene and 3‒10 vol% phlogopite at the expense of olivine and clinopyroxene. A later suite of mafic rocks occurs as mafic lamprophyre dikes throughout the Laiyuan complex. These dikes occasionally contain some pure hornblendite xenoliths, which formed by reaction-replacement of clinopyroxene at high pressures of up to 0.97‒1.25 GPa (∼37‒47 km crustal depth). Mass balance calculations suggest that the olivine-, pyroxene- and phlogopite-bearing hornblendites in the early mafic‒ultramafic intrusions formed almost without melt extraction, whereas the pure hornblendites brought up by lamprophyre dikes required extraction of ≥ 20‒30 wt% residual andesitic to dacitic melts. The latter suggests that fractionation of amphibole in the middle to lower crust through the formation of reaction-replacement hornblendites is a viable way to produce adakite-like magmas. New age constraints suggest that the early mafic-ultramafic intrusions formed during ∼132‒138 Ma, which overlaps with the timespan of ∼126‒145 Ma recorded by the much more voluminous intermediate to felsic rocks of the Laiyuan complex. By contrast, the late mafic and intermediate lamprophyre dikes were emplaced during ∼110‒125 Ma. Therefore, the voluminous early magmatism in the Laiyuan complex was likely triggered by the retreat of the flat-subducting Paleo-Pacific slab, whereas the minor later, mafic to intermediate magmas may have formed in response to further slab sinking-induced mantle thermal perturbations. Whole-rock geochemical data suggest that the early mafic magmas formed by partial melting of subduction-related metasomatized lithospheric mantle, and that the early intermediate to felsic magmas with adakite-like signatures formed from mafic magmas through strong amphibole fractionation without plagioclase in the lower crust. The late mafic magmas seem to be derived from a slightly different metasomatized lithospheric mantle by lower degrees of partial melting.


2016 ◽  
Vol 2 (7) ◽  
pp. e1600022 ◽  
Author(s):  
Lydian M. Boschman ◽  
Douwe J. J. van Hinsbergen

The oceanic Pacific Plate started forming in Early Jurassic time within the vast Panthalassa Ocean that surrounded the supercontinent Pangea, and contains the oldest lithosphere that can directly constrain the geodynamic history of the circum-Pangean Earth. We show that the geometry of the oldest marine magnetic anomalies of the Pacific Plate attests to a unique plate kinematic event that sparked the plate’s birth at virtually a point location, surrounded by the Izanagi, Farallon, and Phoenix Plates. We reconstruct the unstable triple junction that caused the plate reorganization, which led to the birth of the Pacific Plate, and present a model of the plate tectonic configuration that preconditioned this event. We show that a stable but migrating triple junction involving the gradual cessation of intraoceanic Panthalassa subduction culminated in the formation of an unstable transform-transform-transform triple junction. The consequent plate boundary reorganization resulted in the formation of a stable triangular three-ridge system from which the nascent Pacific Plate expanded. We link the birth of the Pacific Plate to the regional termination of intra-Panthalassa subduction. Remnants thereof have been identified in the deep lower mantle of which the locations may provide paleolongitudinal control on the absolute location of the early Pacific Plate. Our results constitute an essential step in unraveling the plate tectonic evolution of “Thalassa Incognita” that comprises the comprehensive Panthalassa Ocean surrounding Pangea.


Sign in / Sign up

Export Citation Format

Share Document