Studies in the thiophene series. IV. Electrochemical bromination in methanolic ammonium bromide solution

1972 ◽  
Vol 37 (9) ◽  
pp. 3122-3123 ◽  
Author(s):  
M. Němec ◽  
J. Šrogl ◽  
M. Janda
Author(s):  
Saurabh Singh ◽  
Bimlesh Kumar ◽  
Narendra Kumar Pandey ◽  
Barinder Kaur ◽  
Arun Kumar ◽  
...  

Objective: The present study highlights the development of a method to synthesize copper nanoparticles (CuNPs).Methods: CuNPs were developed using 0.01 M copper penta sulfate and 0.11 M of ascorbic acid (AA) and 0.03 M of cetyl trimethyl ammonium bromide solution. The synthesized CuNPs were differentiated through filtration and washed by water (deionized). CuNPs were kept in dialysis bag 70 KD in a 250 mL glass beaker along with distilled water. The assembly was kept on a magnetic stirrer for 24 h at 500 rpm. Then, the dialysis bag containing CuNPs solution was filtered by a filter assembly with 0.2 μm nylon filter. The filtered CuNPs were spray dried with the help of spray drier.Results: The prepared CuNPs were found to be 440 nm with zeta potential of −10 mV and polydispersity index 0.314.Conclusion: The investigation deciphers the promising and material technique to synthesis of CuNPs by methods for synthetic reduction utilizing strategy using AA (0.2 M) and sodium hydroxide (1 M), and Syloid 244FP.


1995 ◽  
Vol 50 (2-3) ◽  
pp. 316-322 ◽  
Author(s):  
Yukihiro Yoshimura ◽  
Seiji Sawamura ◽  
Yoshihiro Taniguchi

Abstract The viscosity of aqueous ammonium bromide solutions is measured at 0.1-1.0 mol kg-1, 278.2-323.2 K, and 0.1-375 MPa, using a high-pressure rolling-ball viscometer. The activation energy (Ev) for viscous flow and Jones-Dole's B coefficient are estimated. Ev against pressure yields a concave curve with a minimum and B yields a convex one with a maximum. These phenomena are attributed to pressure, temperature, and concentration effects on the water-structure.


Author(s):  
Shailesh R. Sheth ◽  
Jayesh R. Bellare

Specimen support and astigmatism correction in Electron Microscopy are at least two areas in which lacey polymer films find extensive applications. Although their preparation has been studied for a very long time, present techniques still suffer from incomplete release of the film from its substrate and presence of a large number of pseudo holes in the film. Our method ensures complete removal of the entire lacey film from the substrate and fewer pseudo holes by pre-treating the substrate with Gum Arabic, which acts as a film release agent.The method is based on the classical condensation technique for preparing lacey films which is essentially deposition of minute water or ice droplets on the substrate and laying the polymer film over it, so that micro holes are formed corresponding to the droplets. A microscope glass slide (the substrate) is immersed in 2.0% (w/v) aq. CTAB (cetyl trimethyl ammonium bromide)-0.22% (w/v) aq.


Sign in / Sign up

Export Citation Format

Share Document