F2 storage by confinement inside carbon nanotubes

2016 ◽  
Vol 94 (1) ◽  
pp. 15-19 ◽  
Author(s):  
Wiem Felah Gtari ◽  
Bahoueddine Tangour
Keyword(s):  
Carbon Nanotubes ◽  
Density Functional ◽  
Theoretical Calculations ◽  
Density Functional Theory Method ◽  
Van Der Waals Interactions ◽  
Basis Set ◽  
Basis Sets ◽  
Functional Theory ◽  
The Density Functional Theory ◽  
Walled Carbon Nanotubes

Theoretical calculations have been achieved to study the interaction between the confined F2 molecule along the nanotube axis and perpendicular to it and armchair (n,n) single-walled carbon nanotubes with n = 4, 5, 6, 7, and 8 and the zig-ag nanotube (9,0) using the density functional theory method with the CAM-B3LYP functional and both cc-pVQZ and STO-3G basis sets. The interaction of the F2 molecule with the nanotube is different according to the molecular orientation, the chirality of the carbon nanotube, and the confinement space extension. These results interpreted by means of van der Waals interactions reveal anisotropic and competitive behavior at the nanometric level. The π electrons of the nanotube interact with the lone pairs of F2 highlighting its lateral polarizability. The encapsulated F2 molecule is stable along and perpendicular to the nanotube (5,5) and (6,6) axis. The best stabilization energy is obtained fornanotube (5,5) at the perpendicular position using the cc-pVQZ basis set.

scholarly journals Mechanistic, energetic and structural studies of single-walled carbon nanotubes functionalized with penicillamine

2018 ◽  
Vol 83 (2) ◽  
pp. 167-179
Author(s):  
Hosein Shaki ◽  
Ali Morsali ◽  
Heidar Raissi ◽  
Mohammad Hakimi ◽  
Ali Beyramabadi
Keyword(s):  
Carbon Nanotubes ◽  
Density Functional ◽  
Activation Parameters ◽  
Covalent Functionalization ◽  
Functional Theory ◽  
Quantum Molecular Descriptors ◽  
Chemical Systems ◽  
Gibbs Energies ◽  
The Density Functional Theory ◽  
Walled Carbon Nanotubes

Using the density functional theory, the possible non-covalent interactions and six mechanisms of covalent functionalization of the drug penicillamine with functionalized carbon nanotubes (CNT) were investigated. Quantum molecular descriptors of the non-covalent configurations were studied. It was determined that binding of the drug penicillamine with functionalized CNT is thermodynamically viable. COOH functionalized CNT (NTCOOH) has more binding energy than COCl functionalized CNT (NTCOCl) and could act as a favorable system for penicillamine drug delivery within biological and chemical systems (non-covalent). NTCOOH and NTCOCl can bond to the NH2, OH and SH groups of penicillamine through OH (COOH mechanism) and Cl (COCl mechanism) groups, respectively. The activation energies, activation enthalpies and activation Gibbs energies of six pathways were calculated and compared with each other. The activation parameters related to the COOH mechanism are higher than those related to the COCl mechanism and therefore, the COCl mechanism is suitable for covalent functionalization. These results could be generalized to other similar drugs.

scholarly journals On the Use of DFT+U to Describe the Electronic Structure of TiO2 Nanoparticles: (TiO2)35 as a Case Study

2020 ◽  
Author(s):  
Angel Morales ◽  
Stephen Rhatigan ◽  
Michael Nolan ◽  
Frances Illas
Keyword(s):  
Density Functional ◽  
Energy Gap ◽  
Plane Waves ◽  
Basis Set ◽  
Basis Sets ◽  
Functional Theory ◽  
The Density Functional Theory ◽  
Structural And Electronic Properties ◽  
Rotationally Invariant

One of the main drawbacks in the density functional theory (DFT) formalism is the underestimation of the energy gaps in semiconducting materials. The combination of DFT with an explicit treatment of electronic correlation with a Hubbard-like model, known as DFT+<i>U</i> method, has been extensively applied to open up the energy gap in materials. Here, we introduce a systematic study where the selection of <i>U</i> parameter is analyzed considering two different basis sets: plane-waves (PWs) and numerical atomic orbitals (NAOs), together with different implementations for including <i>U</i>, to investigate the structural and electronic properties of a well-defined bipyramidal (TiO<sub>2</sub>)<sub>35 </sub>nanoparticle (NP). This study reveals, as expected, that a certain <i>U</i> value can reproduce the experimental value for the energy gap. However, there is a high dependence on the choice of basis set and, and on the +<i>U</i> parameter employed. The present study shows that the linear combination of the NAO basis functions, as implemented in FHI-aims, requires a lower <i>U</i> value than the simplified rotationally invariant approaches as implemented in VASP. Therefore, the transferability of <i>U</i> values between codes is unfeasible and not recommended, demanding initial benchmark studies for the property of interest as a reference to determine the appropriate value of <i>U</i>.

Basis Set Effects in Density Functional Theory Calculation of Muoniated Cytosine Nucleobase

2020 ◽  
Vol 860 ◽  
pp. 282-287
Author(s):  
Wan Nurfadhilah Zaharim ◽  
Shukri Sulaiman ◽  
Saidah Sakinah Mohd Tajudin ◽  
Siti Nuramira Abu Bakar ◽  
Nur Eliana Ismail ◽  
...  
Keyword(s):  
Density Functional Theory ◽  
Total Energy ◽  
Density Functional ◽  
Density Functional Theory Calculation ◽  
Geometry Optimization ◽  
Density Functional Theory Method ◽  
Basis Set ◽  
Basis Sets ◽  
Functional Theory ◽  
Muonium Hyperfine

The Density Functional Theory method was employed to investigate the electronic structure and muonium hyperfine interaction of muonium trapped near carbon atom labelled as '5' in cytosine nucleobase. Eighteen different basis sets in combination with B3LYP functional were examined in geometry optimization calculations on the muoniated radical. There are significant quantitative differences in the calculated total energy. The employment of basis set that does not include polarization function produces an optimized structure with high total energy. The 6-311++G(d,p) basis set yielded the lowest total energy as compared to other basis sets. The bond order of muonium trapped at C5 atom is in the range of 0.841 to 0.862. The 6-31G basis set produced the muonium Fermi contact coupling constant that is the closest to the experimental value.

scholarly journals The Hollow Spherical Silica Molecule (SiO2)20(H2O)10: Theoretical Calculations of the IR spectrum

2017 ◽  
Vol 18 (1) ◽  
pp. 111-116
Author(s):  
O. Filonenko ◽  
V. Lobanov ◽  
A. Grebenyuk
Keyword(s):  
Ir Spectrum ◽  
Density Functional ◽  
Theoretical Calculations ◽  
Harmonic Approximation ◽  
Density Functional Theory Method ◽  
Basis Set ◽  
Calculated Spectrum ◽  
Functional Theory ◽  
Spherical Silica ◽  
Spherical Molecule

The IR spectrum of hollow spherical molecule (SiO2)20(H2O)10 have been calculated within harmonic approximation using density functional theory method (exchange-correlation functional B3LYP and basis set 6-31G (d, p)) and an assignment have been made of the frequencies to the forms of vibrations. It has been shown that the theoretically calculated spectrum of molecule (SiO2)20(H2O)10 is consistent with the experimental spectra of nanospheres, so the molecule (SiO2)20(H2O)10 and its higher homologues can be used in quantum-chemical calculations of the properties of synthesized hollow nanospheres (d ≈ 290 nm).

scholarly journals On the Use of DFT+U to Describe the Electronic Structure of TiO2 Nanoparticles: (TiO2)35 as a Case Study

2020 ◽  
Author(s):  
Angel Morales ◽  
Stephen Rhatigan ◽  
Michael Nolan ◽  
Frances Illas
Keyword(s):  
Density Functional ◽  
Energy Gap ◽  
Plane Waves ◽  
Basis Set ◽  
Basis Sets ◽  
Functional Theory ◽  
The Density Functional Theory ◽  
Structural And Electronic Properties ◽  
Rotationally Invariant

One of the main drawbacks in the density functional theory (DFT) formalism is the underestimation of the energy gaps in semiconducting materials. The combination of DFT with an explicit treatment of electronic correlation with a Hubbard-like model, known as DFT+<i>U</i> method, has been extensively applied to open up the energy gap in materials. Here, we introduce a systematic study where the selection of <i>U</i> parameter is analyzed considering two different basis sets: plane-waves (PWs) and numerical atomic orbitals (NAOs), together with different implementations for including <i>U</i>, to investigate the structural and electronic properties of a well-defined bipyramidal (TiO<sub>2</sub>)<sub>35 </sub>nanoparticle (NP). This study reveals, as expected, that a certain <i>U</i> value can reproduce the experimental value for the energy gap. However, there is a high dependence on the choice of basis set and, and on the +<i>U</i> parameter employed. The present study shows that the linear combination of the NAO basis functions, as implemented in FHI-aims, requires a lower <i>U</i> value than the simplified rotationally invariant approaches as implemented in VASP. Therefore, the transferability of <i>U</i> values between codes is unfeasible and not recommended, demanding initial benchmark studies for the property of interest as a reference to determine the appropriate value of <i>U</i>.

scholarly journals Модуль Юнга и коэффициент Пуассона двумерно протяженного колонного графена

2018 ◽  
Vol 60 (9) ◽  
pp. 1781
Author(s):  
А.С. Колесникова ◽  
М.М. Мазепа
Keyword(s):  
Carbon Nanotubes ◽  
Density Functional Theory ◽  
Numerical Experiments ◽  
Density Functional ◽  
Density Functional Theory Method ◽  
Young Modulus ◽  
Theory Method ◽  
Functional Theory ◽  
Poisson Coefficient ◽  
The Density Functional Theory

AbstractThe Young modulus and the Poisson coefficient of two-dimensionally extended columnar graphene are theoretically studied in the uniaxial tension. The effect of length and diameter of nanotubes constituting the composite is considered. The numerical experiments are implemented using the minimum structural link and the periodical boundary conditions via the density functional theory method. The Young moduli of the composite are evaluated upon its extension along the normal to the graphene and along the graphene directions with increasing lengths of carbon nanotubes (CNTs) in the composite. The Poisson coefficient for this type of composites is found to be 0.025.

Benchmark of Simplified Time-Dependent Density Functional Theory for UV-Vis Spectral Properties of Porphyrinoids

2019 ◽  
Author(s):  
Kamal Batra ◽  
Stefan Zahn ◽  
Thomas Heine
Keyword(s):  
Density Functional Theory ◽  
Density Functional ◽  
Large Scale ◽  
Absolute Error ◽  
Time Dependent ◽  
Basis Set ◽  
Basis Sets ◽  
Functional Theory ◽  
Framework Materials ◽  
Dependent Density

<p>We thoroughly benchmark time-dependent density- functional theory for the predictive calculation of UV/Vis spectra of porphyrin derivatives. With the aim to provide an approach that is computationally feasible for large-scale applications such as biological systems or molecular framework materials, albeit performing with high accuracy for the Q-bands, we compare the results given by various computational protocols, including basis sets, density-functionals (including gradient corrected local functionals, hybrids, double hybrids and range-separated functionals), and various variants of time-dependent density-functional theory, including the simplified Tamm-Dancoff approximation. An excellent choice for these calculations is the range-separated functional CAM-B3LYP in combination with the simplified Tamm-Dancoff approximation and a basis set of double-ζ quality def2-SVP (mean absolute error [MAE] of ~0.05 eV). This is not surpassed by more expensive approaches, not even by double hybrid functionals, and solely systematic excitation energy scaling slightly improves the results (MAE ~0.04 eV). </p>

scholarly journals Strain Effects on the Electronic and Thermoelectric Properties of n(PbTe)-m(Bi2Te3) System Compounds

Materials ◽  
2021 ◽  
Vol 14 (15) ◽  
pp. 4086
Author(s):  
Weiliang Ma ◽  
Marie-Christine Record ◽  
Jing Tian ◽  
Pascal Boulet
Keyword(s):  
Density Functional ◽  
Lattice Thermal Conductivity ◽  
Compressive Strain ◽  
Van Der Waals Interactions ◽  
Functional Theory ◽  
Band Engineering ◽  
Seebeck Coefficients ◽  
The Density Functional Theory ◽  
P Type ◽  
Narrow Band Gap Semiconductors

Owing to their low lattice thermal conductivity, many compounds of the n(PbTe)-m(Bi2Te3) homologous series have been reported in the literature with thermoelectric (TE) properties that still need improvement. For this purpose, in this work, we have implemented the band engineering approach by applying biaxial tensile and compressive strains using the density functional theory (DFT) on various compounds of this series, namely Bi2Te3, PbBi2Te4, PbBi4Te7 and Pb2Bi2Te5. All the fully relaxed Bi2Te3, PbBi2Te4, PbBi4Te7 and Pb2Bi2Te5 compounds are narrow band-gap semiconductors. When applying strains, a semiconductor-to-metal transition occurs for all the compounds. Within the range of open-gap, the electrical conductivity decreases as the compressive strain increases. We also found that compressive strains cause larger Seebeck coefficients than tensile ones, with the maximum Seebeck coefficient being located at −2%, −6%, −3% and 0% strain for p-type Bi2Te3, PbBi2Te4, PbBi4Te7 and Pb2Bi2Te5, respectively. The use of the quantum theory of atoms in molecules (QTAIM) as a complementary tool has shown that the van der Waals interactions located between the structure slabs evolve with strains as well as the topological properties of Bi2Te3 and PbBi2Te4. This study shows that the TE performance of the n(PbTe)-m(Bi2Te3) compounds is modified under strains.

Study of the Stability and Chemical Reactivity of a Series of Tetrazole Pyrimidine Hybrids by the Density Functional Theory Method (DFT)

2021 ◽  
Vol 37 (4) ◽  
pp. 805-812
Author(s):  
Ahissandonatien Ehouman ◽  
Adjoumanirodrigue Kouakou ◽  
Fatogoma Diarrassouba ◽  
Hakim Abdel Aziz Ouattara ◽  
Paulin Marius Niamien
Keyword(s):  
Density Functional ◽  
Theoretical Study ◽  
Molecular Descriptors ◽  
Chemical Reactivity ◽  
Density Functional Theory Method ◽  
Functional Theory ◽  
Reactivity Descriptors ◽  
The Density Functional Theory ◽  
The Stability ◽  
Global Reactivity Descriptors

Our theoretical study of stability and reactivity was carried out on six (06) molecules of a series of pyrimidine tetrazole hybrids (PTH) substituted with H, F, Cl, Br, OCH3 and CH3 atoms and groups of atoms using the density function theory (DFT). Analysis of the thermodynamic formation quantities confirmed the formation and existence of the series of molecules studied. Quantum chemical calculations at the B3LYP / 6-311G (d, p) level of theory determined molecular descriptors. Global reactivity descriptors were also determined and analyzed. Thus, the results showed that the compound PTH_1 is the most stable, and PTH_5 is the most reactive and nucleophilic. Similarly, the compound PTH_4 is the most electrophilic. The analysis of the local descriptors and the boundary molecular orbitals allowed us to identify the preferred atoms for electrophilic and nucleophilic attacks.

Sign in / Sign up

Export Citation Format

Share Document