scholarly journals Differences in growth and wood density in clones and provenance hybrid clones of Norway spruce

2017 ◽  
Vol 47 (3) ◽  
pp. 389-399 ◽  
Author(s):  
Eino Levkoev ◽  
Antti Kilpeläinen ◽  
Katri Luostarinen ◽  
Pertti Pulkkinen ◽  
Lauri Mehtätalo ◽  
...  
Keyword(s):  
Norway Spruce ◽  
Wood Density ◽  
Biomass Yield ◽  
Geographical Origin ◽  
Stem Volume ◽  
Wood Biomass ◽  
Wood Production ◽  
Phenotypic Differences ◽  
Breast Height ◽  
Hybrid Clones

The growing forest bioeconomy calls for enhancing wood production in Finland. Accordingly, we studied phenotypic differences and correlations for growth and wood density traits in 25 Norway spruce (Picea abies (L.) Karst.) genotypes grown in a field trial established in the 1970s in southeastern Finland. We also studied the effect of the geographical origin of parent trees. The clones represented six southern Finnish and two southwestern Russian clones and three Finnish–Swiss, eight Finnish–German, three Finnish–Latvian, and three Finnish–Estonian hybrid clones. Some local Finnish clones (e.g., V43) and provenance hybrid clones (e.g., Finnish–German V449 and V381) clearly displayed higher stem volume than the average over all of the clones and relatively high overall wood density (and wood biomass yield). The increase in latitudinal transfer distance of parent trees compared with the latitude of the trial seemed to decrease the height, diameter at breast height, and stem volume, but the effect was not significant (p > 0.05). The overall wood density was affected significantly only by the latitude of the father parent trees (p < 0.05). Wood density traits showed clearly lower phenotypic variation compared with other traits. Contrary to our hypothesis, none of the studied hybrids showed superior properties compared with the local Finnish clones.

Differences in growth and wood property traits in cloned Norway spruce (Picea abies)

2007 ◽  
Vol 37 (12) ◽  
pp. 2600-2611 ◽  
Author(s):  
A. Zubizarreta Gerendiain ◽  
H. Peltola ◽  
P. Pulkkinen ◽  
R. Jaatinen ◽  
A. Pappinen ◽  
...  
Keyword(s):  
Picea Abies ◽  
Norway Spruce ◽  
Wood Density ◽  
Volume Growth ◽  
Wood Property ◽  
Growth Yield ◽  
Stem Volume ◽  
Forest Tree Breeding ◽  
Wood Processing ◽  
Selection For

Volume growth has typically been used as a selection trait of prime importance in forest tree breeding. Less attention has been given to the genetic or phenotypic relationships between the growth or yield and wood density traits. In the above context, we aimed to investigate the phenotypic relationships among different growth, yield, and wood density traits of 20 Norway spruce ( Picea abies (L.) Karst.) clones grown in southeastern Finland, in order to identify whether a high growth rate was associated with low wood density in any of the clones. Compared with growth or yield traits, the wood density traits showed lower phenotypic variations. The phenotypic correlations between growth, yield, and wood density traits were, on average, from moderate to high, suggesting that selection for one trait would simultaneously affect the other traits. Compared with volume production, selection based on stem mass could be more profitable if a clonal stand is managed for pulpwood rather than mechanical wood processing and vice versa; whereas selection for overall wood density alone would reduce both the stem volume and stem mass. However, by compromising the gain or loss in wood density and stem volume, clones with high stem volume and a relatively high wood density could be found.

scholarly journals Effect of Stem Diameter, Genetics, and Wood Properties on Stem Cracking in Norway Spruce

Forests ◽  
2018 ◽  
Vol 9 (9) ◽  
pp. 546 ◽  
Author(s):  
Pauls Zeltiņš ◽  
Juris Katrevičs ◽  
Arnis Gailis ◽  
Tiit Maaten ◽  
Endijs Bāders ◽  
...  
Keyword(s):  
Picea Abies ◽  
Norway Spruce ◽  
Tree Ring ◽  
Wood Density ◽  
Wood Properties ◽  
Provenance Trial ◽  
Breast Height ◽  
Silvicultural Treatments ◽  
Latewood Density ◽  
Potential Risks

The choice of seed material (genetics) is one of the tools that can improve adaptation to the changing climate. Insufficient adaptation can result in a number of potential risks, including stem cracking. The goal of this study is to assess the influence of genetics and wood properties on stem cracking in Norway spruce (Picea abies Karst). The study was conducted on a 35-year-old provenance trial in Eastern Latvia. Stem cracks were assessed using a six-score scale. Tree-ring parameters, i.e., latewood proportion, maximum and mean density, mean earlywood, and latewood density were analysed. The overall incidence of stem cracking was 23.5%, varying between 0% and 79% at a family mean level. Heritability of stem cracking was low, ca., two times lower than for the diameter at breast height (DBH): h2 = 0.09 and 0.21, respectively. There were non-significant family and provenance effects on the occurrence of stem cracks, and weak family mean correlations between DBH, and the proportion of trees with any stem cracks or severe stem cracks. Overall, larger trees were more prone to cracking irrespective of provenance or family. Cracked trees had lower wood density parameters than unaffected trees, yet the latewood proportion was similar. Silvicultural treatments or selection to improve wood density could be suggested to reduce the risk of stem cracking.

scholarly journals Density and wood biomass development in whole-tree analyses of Scots pine, and aspects on heritability estimates

2011 ◽  
Vol 60 (1-6) ◽  
pp. 224-232
Author(s):  
A. Fries ◽  
T. Mörling
Keyword(s):  
Wood Density ◽  
Scots Pine ◽  
Annual Ring ◽  
Breeding Population ◽  
Wood Biomass ◽  
Breast Height ◽  
Stem Section ◽  
Ring Number ◽  
Latewood Density ◽  
Whole Tree

Abstract Twelve trees in a 36 year old full-sib progeny plantation, testing a part of the Scots pine breeding population, were analysed for wood density and the width of the earlywood and latewood sections in each annual ring. Wood samples (stem discs) were taken with 1 m intervals along the stem and the analyses covered thus the whole stem. Based on these data, the biomass of the earlywood and latewood of each annual ring in each 1 meter stem section was estimated. Latewood density increased from pith to bark while it decreased from stem base to top. Earlywood density was of similar size both radially and vertically. The biomass in each annual ring increased until around ring number 10 from pith for both wood types. For earlywood it then decreased while it remained quite constant for latewood. Latewood biomass decreased more rapidly towards the top of the tree than earlywood biomass. Heritabilities for earlywood and latewood in each annual ring at breast height (estimated in the same material in a previous study) were related to the corresponding biomasses to indirectly estimate overall heritability for wood density valid for the whole stem. The analyses indicate that the decrease in heritability for latewood density and increase for earlywood density, from the pith to bark, is compensated by the increase in latewood biomass in relation to earlywood biomass. Thus, the heritability of the latewood density and earlywood density seems to have the same influence on the overall heritability for density in the whole stem.

Differences in fibre properties in cloned Norway spruce (Picea abies)

2008 ◽  
Vol 38 (5) ◽  
pp. 1071-1082 ◽  
Author(s):  
A. Zubizarreta Gerendiain ◽  
H. Peltola ◽  
P. Pulkkinen ◽  
R. Jaatinen ◽  
A. Pappinen
Keyword(s):  
Picea Abies ◽  
Norway Spruce ◽  
Wood Density ◽  
Growth Traits ◽  
Fibre Length ◽  
Stem Volume ◽  
Fibre Properties ◽  
Phenotypic Correlations ◽  
Fibre Width ◽  
Selection For

In forest breeding programmes, growth has typically been used as a selection trait of prime importance in Norway spruce ( Picea abies (L.) Karst.), whereas less attention has been given to the wood and fibre characteristics. In the above context, we investigated phenotypic relationships between different fibre properties and growth and wood density traits in 20 cloned Norway spruce based on a clonal trial established in the 1970s in southeastern Finland. We found that fibre width showed, on average (2.9%), the lowest phenotypic variation followed by fibre wall thickness (3.4%), coarseness (5.5%), and fibre length (8.1%). All of the phenotypic correlations between the fibre properties were also positive (p < 0.05), ranging from moderate to strong, suggesting that selection for one trait could simultaneously affect the other traits. The phenotypic correlations, on average, were quite weak but positive between growth and fibre properties and slightly negative or weak positive between wood density and different fibre properties (p < 0.05). Individually, some of the clones showed negative correlation between growth traits and fibre length. As a result, selection for fibre properties alone could also reduce overall stem volume (or stem mass) and would not directly indicate wood density traits and vice versa.

scholarly journals Estimation of Genetic Parameters and Wood Yield Selection Index in a Clonal Trial of Korean Pine (Pinus koraiensis) in Northeastern China

2021 ◽  
Vol 13 (8) ◽  
pp. 4167
Author(s):  
David Kombi Kaviriri ◽  
Huan-Zhen Liu ◽  
Xi-Yang Zhao
Keyword(s):  
Selection Index ◽  
Tree Height ◽  
Stem Volume ◽  
Korean Pine ◽  
Branch Number ◽  
Basal Diameter ◽  
Diameter At Breast Height ◽  
Breast Height ◽  
Stem Straightness ◽  
Clonal Trial

In order to determine suitable traits for selecting high-wood-yield Korean pine materials, eleven morphological characteristics (tree height, basal diameter, diameter at breast height, diameter at 3 meter height, stem straightness degree, crown breadth, crown height, branch angle, branch number per node, bark thickness, and stem volume) were investigated in a 38-year-old Korean pine clonal trial at Naozhi orchard. A statistical approach combining variance and regression analysis was used to extract appropriate traits for selecting elite clones. Results of variance analysis showed significant difference in variance sources in most of the traits, except for the stem straightness degree, which had a p-value of 0.94. Moderate to high coefficients of variation and clonal repeatability ranged from 10.73% to 35.45% and from 0.06% to 0.78%, respectively. Strong significant correlations on the phenotypic and genotypic levels were observed between the straightness traits and tree volume, but crown breadth was weakly correlated to the volume. Four principal components retaining up to 80% of the total variation were extracted, and stem volume, basal diameter, diameter at breast height, diameter at 3 meter height, tree height, and crown height displayed high correlation to these components (r ranged from 0.76 to 0.98). Based on the Type III sum of squares, tree height, diameter at breast height, and branch number showed significant information to explain the clonal variability based on stem volume. Using the extracted characteristics as the selection index, six clones (PK105, PK59, PK104, PK36, PK28, and K101) displayed the highest Qi values, with a selection rate of 5% corresponding to the genetic gain of 42.96% in stem volume. This study provides beneficial information for the selection of multiple traits for genetically improved genotypes of Korean pine.

scholarly journals Assessment of Stem Volume on Plots Using Terrestrial Laser Scanner: A Precision Forestry Application

Sensors ◽  
2021 ◽  
Vol 21 (1) ◽  
pp. 301
Author(s):  
Dimitrios Panagiotidis ◽  
Azadeh Abdollahnejad ◽  
Martin Slavík
Keyword(s):  
Norway Spruce ◽  
Laser Scanner ◽  
Estimation Methods ◽  
Coefficient Of Determination ◽  
Stem Volume ◽  
Small Scale ◽  
Terrestrial Laser Scanner ◽  
Precision Forestry ◽  
Total Tree ◽  
European Oak

Timber volume is an important asset, not only as an ecological component, but also as a key source of present and future revenues, which requires precise estimates. We used the Trimble TX8 survey-grade terrestrial laser scanner (TLS) to create a detailed 3D point cloud for extracting total tree height and diameter at breast height (1.3 m; DBH). We compared two different methods to accurately estimate total tree heights: the first method was based on a modified version of the local maxima algorithm for treetop detection, “HTTD”, and for the second method we used the centers of stem cross-sections at stump height (30 cm), “HTSP”. DBH was estimated by a computationally robust algebraic circle-fitting algorithm through hierarchical cluster analysis (HCA). This study aimed to assess the accuracy of these descriptors for evaluating total stem volume by comparing the results with the reference tree measurements. The difference between the estimated total stem volume from HTTD and measured stems was 2.732 m3 for European oak and 2.971 m3 for Norway spruce; differences between the estimated volume from HTSP and measured stems was 1.228 m3 and 2.006 m3 for European oak and Norway spruce, respectively. The coefficient of determination indicated a strong relationship between the measured and estimated total stem volumes from both height estimation methods with an R2 = 0.89 for HTTD and R2 = 0.87 for HTSP for European oak, and R2 = 0.98 for both HTTD and HTSP for Norway spruce. Our study has demonstrated the feasibility of finer-resolution remote sensing data for semi-automatic stem volumetric modeling of small-scale studies with high accuracy as a potential advancement in precision forestry.

Sign in / Sign up

Export Citation Format

Share Document