Magnetoelectric and magnetic studies of the Bi1–xCaxFeO3 multiferrioc system

2014 ◽  
Vol 92 (5) ◽  
pp. 389-394 ◽  
Author(s):  
S.F. Mansour ◽  
N.I. Abu-Elsaad ◽  
T.A. Elmosalami
Keyword(s):  
Room Temperature ◽  
Energy Levels ◽  
Resonance Field ◽  
X Ray Diffraction ◽  
Magnetic Studies ◽  
X Ray ◽  
Transmission Electron ◽  
Spin Resonance ◽  
Particle Size And Shape ◽  
Combustion Technique

Bi1–xCaxFeO3 was prepared by the flash autocombustion combustion technique. X-ray diffraction analysis showed a Rhombohedrally distorted hexagonal perovskite structure with space group R3c. The particle size and shape were studied by transmission electron microscope. Magnetization studies at room temperature showed superparamagnetic behavior for the prepared nanoparticles. Magnetoelectric coefficient characterized as magnetic field – induced polarization was investigated. The Lande factor (g), resonance field (Br), relaxation time (τ), and the energy between two adjacent degenerate spin energy levels (ΔE) were estimated from the electron spin resonance spectra.

Magnetic Properties and Fabrication of Monodisperse FePd Nanoparticles

2004 ◽  
Vol 818 ◽  
Author(s):  
Yanglong Hou ◽  
Hiroshi Kondoh ◽  
Toshiaki Ohta
Keyword(s):  
Room Temperature ◽  
Iron Pentacarbonyl ◽  
X Ray Diffraction ◽  
Magnetic Studies ◽  
X Ray ◽  
Transmission Electron ◽  
Adamantanecarboxylic Acid ◽  
Palladium Acetylacetonate ◽  
Crystalline Nature ◽  
Quantum Design Squid Magnetometer

AbstractThe combination of 1-adamantanecarboxylic acid and tri-alkylphosphine was applied to produce monodisperse FePd nanoparticles by the polyol reduction of palladium acetylacetonate and thermally decomposition of iron pentacarbonyl. Images of high resolution transmission electron microscopy (TEM) and X-ray diffraction (XRD) data indicate a highly monodisperse and crystalline nature of the FePd nanoparticles. Magnetic studies performed by Quantum Design SQUID magnetometer show that FePd (16nm) nanoparticles are superparamagnetic at room temperature.

Photoluminescence Enhancement of CdS Nanocrystals Fabricated on Dithiocarbamate Functionalized PET Substrates

2012 ◽  
Vol 512-515 ◽  
pp. 1511-1515
Author(s):  
Chun Lin Zhao ◽  
Li Xing ◽  
Xiao Hong Liang ◽  
Jun Hui Xiang ◽  
Fu Shi Zhang ◽  
...  
Keyword(s):  
Room Temperature ◽  
Hexagonal Structure ◽  
Diffraction Measurement ◽  
X Ray Diffraction ◽  
Visible Absorption ◽  
X Ray ◽  
Cds Nanocrystals ◽  
Morphological Studies ◽  
Transmission Electron

Cadmium sulfide (CdS) nanocrystals (NCs) were self-assembled and in-situ immobilized on the dithiocarbamate (DTCs)-functionalized polyethylene glycol terephthalate (PET) substrates between the organic (carbon disulfide diffused in n-hexane) –aqueous (ethylenediamine and Cd2+ dissolved in water) interface at room temperature. Powder X-ray diffraction measurement revealed the hexagonal structure of CdS nanocrystals. Morphological studies performed by scanning electron microscopy (SEM) and high-resolution transmission electron microscope (HRTEM) showed the island-like structure of CdS nanocrystals on PET substrates, as well as energy-dispersive X-ray spectroscopy (EDS) confirmed the stoichiometries of CdS nanocrystals. The optical properties of DTCs modified CdS nanocrystals were thoroughly investigated by ultraviolet-visible absorption spectroscopy (UV-vis) and fluorescence spectroscopy. The as-prepared DTCs present intrinsic hydrophobicity and strong affinity for CdS nanocrystals.

scholarly journals Facile Organometallic Synthesis of Fe-Based Nanomaterials by Hot Injection Reaction

Nanomaterials ◽  
2021 ◽  
Vol 11 (5) ◽  
pp. 1141
Author(s):  
Georgia Basina ◽  
Hafsa Khurshid ◽  
Nikolaos Tzitzios ◽  
George Hadjipanayis ◽  
Vasileios Tzitzios
Keyword(s):  
Room Temperature ◽  
Colloidal Particles ◽  
Iron Pentacarbonyl ◽  
Vibrating Sample Magnetometer ◽  
X Ray Diffraction ◽  
Organometallic Synthesis ◽  
X Ray ◽  
Transmission Electron ◽  
Hot Injection ◽  
The Stability

Fe-based colloids with a core/shell structure consisting of metallic iron and iron oxide were synthesized by a facile hot injection reaction of iron pentacarbonyl in a multi-surfactant mixture. The size of the colloidal particles was affected by the reaction temperature and the results demonstrated that their stability against complete oxidation related to their size. The crystal structure and the morphology were identified by powder X-ray diffraction and transmission electron microscopy, while the magnetic properties were studied at room temperature with a vibrating sample magnetometer. The injection temperature plays a very crucial role and higher temperatures enhance the stability and the resistance against oxidation. For the case of injection at 315 °C, the nanoparticles had around a 10 nm mean diameter and revealed 132 emu/g. Remarkably, a stable dispersion was created due to the colloids’ surface functionalization in a nonpolar solvent.

Synthesis and Photoluminescence Properties of Novel SnO2 Zigzag Nanoribbons

2010 ◽  
Vol 97-101 ◽  
pp. 4213-4216
Author(s):  
Jian Xiong Liu ◽  
Zheng Yu Wu ◽  
Guo Wen Meng ◽  
Zhao Lin Zhan
Keyword(s):  
Electron Microscopy ◽  
Room Temperature ◽  
Vapour Deposition ◽  
Chemical Vapour ◽  
Photoluminescence Properties ◽  
X Ray Diffraction ◽  
X Ray ◽  
Selected Area Electron Diffraction ◽  
Transmission Electron ◽  
Ceramic Boat

Novel single-crystalline SnO2 zigzag nanoribbons have been successfully synthesized by chemical vapour deposition. Sn powder in a ceramic boat covered with Si plates was heated at 1100°C in a flowing argon atmosphere to get deposits on a Si wafers. The main part of deposits is SnO2 zigzag nanoribbons. They were characterized by means of X-ray diffraction (XRD), field-emission scanning electron microscopy (FE-SEM), energy-dispersive X-ray spectroscopy (EDX), transmission electron microscopy (TEM) and selected-area electron diffraction (SAED). SEM observations reveal that the SnO2 zigzag nanoribbons are almost uniform, with lengths near to several hundred micrometers and have a good periodically tuned microstructure as the same zigzag angle and growth directions. Possible growth mechanism of these zigzag nanoribbons was discussed. A room temperature PL spectrum of the zigzag nanoribbons shows three peaks at 373nm, 421nm and 477nm.The novel zigzag microstructures will provide a new candidate for potential application.

Preparation and Properties of Nano-Crystalline Cellulose Electro-Rheological Fluid

2015 ◽  
Vol 815 ◽  
pp. 217-221
Author(s):  
Ling Li Xu ◽  
Xing Ling Shi ◽  
Qing Liang Wang
Keyword(s):  
Room Temperature ◽  
Silicone Oil ◽  
Strong Acid ◽  
Crystalline Cellulose ◽  
Methyl Silicone ◽  
Shearing Stress ◽  
X Ray Diffraction ◽  
X Ray ◽  
Nano Crystalline ◽  
Transmission Electron

nanocrystalline cellulose (NCC) was prepared from micro-crystalline cellulose (MCC) by strong acid hydrolysis. The characteristics of such particle were studied by transmission electron microscopy, X-ray diffraction and Fourier transform infrared spectroscopy. Electro-rheological fluids (ERF) were prepared by dispersing NCC and MCC in methyl-silicone oil, and their ER effects were measured. Experimental results indicated that NCC ERF exhibited a remarkable ER effect. The highest static shearing stress of NCC ERF (3.5 g/ml) was 5.1 kPa at the room temperature under a 4 .2 kV/mm electric field, increased about 5.5 times compared to MCC ERF, and sedimentation of NCC ERF was not observed even after 60 days.

New method for the production of bulk amorphous materials of Nd–Fe–B alloys

2005 ◽  
Vol 20 (3) ◽  
pp. 563-566 ◽  
Author(s):  
Tetsuji Saito ◽  
Hiroyuku Takeishi ◽  
Noboru Nakayama
Keyword(s):  
Electron Microscopy ◽  
Amorphous Materials ◽  
Room Temperature ◽  
Amorphous Structure ◽  
X Ray Diffraction ◽  
Bulk Materials ◽  
X Ray ◽  
Transmission Electron ◽  
Melt Spun ◽  
Melt Spun Ribbons

We report a new compression shearing method for the production of bulk amorphous materials. In this study, amorphous Nd–Fe–B melt-spun ribbons were successfully consolidated into bulk form at room temperature by the compression shearing method. X-ray diffraction and transmission electron microscopy studies revealed that the amorphous structure was well maintained in the bulk materials. The resultant bulk materials exhibited the same magnetic properties as the original amorphous Nd–Fe–B materials.

A Chemical Solution Route to Rapid Synthesis of Homogeneous Bi100−xSbx Alloys Nanoparticles at Room Temperature

2007 ◽  
Vol 7 (2) ◽  
pp. 525-529 ◽  
Author(s):  
Bo Zhou ◽  
Jun-Jie Zhu
Keyword(s):  
Room Temperature ◽  
Raw Materials ◽  
X Ray Diffraction ◽  
X Ray ◽  
Selected Area Electron Diffraction ◽  
Transmission Electron ◽  
Solution Route ◽  
Diffraction Patterns ◽  
Co Reduction ◽  
Chemical Solution Route

A chemical co-reduction route in aqueous solution was developed to synthesize Bi100−xSbx alloys at room temperature. The hydrolyses of Bi(III) and Sb(III) were effectively avoided by selecting proper raw materials and coordinator. X-ray diffraction analysis indicated that the as-prepared Bi100−xSbx alloys were homogeneous and phase-pure, and the Bi/Sb ratios in the alloys were very close to those in the aqueous solutions. The transmission electron microscope observation showed that the as-prepared Bi100−xSbx (x = 0∼100) alloys were particles with a size of tens of nanometers. The selected area electron diffraction patterns confirmed the high crystallinity, the homogeneousness, and the composition controllability of as-prepared alloys. All these characters and the nanometer-scaled size of the alloys are believed to be beneficial to the thermoelectric property of the Bi100−xSbx alloys.

Effects of Bi Doping on the In15Sb85 Phase Change Recording Thin Film

2008 ◽  
Vol 47-50 ◽  
pp. 813-816
Author(s):  
Sin Liang Ou ◽  
Po Cheng Kuo ◽  
Shu Chi Sheu ◽  
Chih Hsiang Hsiao ◽  
Don Yau Chiang ◽  
...  
Keyword(s):  
Room Temperature ◽  
X Ray Diffraction ◽  
Crystallization Activation Energy ◽  
Composite Target ◽  
X Ray ◽  
Transmission Electron ◽  
Thermal Analyzer ◽  
Crystallization Speed ◽  
Bi Doping ◽  
Si Wafer

The (In15Sb85)100-xBix films (x = 0~18.3) were deposited on nature oxidized Si wafer and glass substrate at room temperature by magnetron co-sputtering of Sb target and InBi composite target. The optical and thermal properties of the films were examined by reflectivity thermal analyzer. Microstructures of the films were analyzed by X-ray diffraction and transmission electron microscope. The crystallization activation energy of the (In15Sb85)100-xBix film (x = 0~18.3) was decreased with increasing Bi content, this indicated that the crystallization speed was improved by doping Bi. The structure of as-deposited (In15Sb85)100-xBix films was amorphous and it would transform to Sb, InSb, Bi, and BiIn2 coexisting phases after annealing at 250 °C for 30 min.

Room Temperature Self-Annealing of Electroplated and Sputtered Copper Films

1999 ◽  
Vol 562 ◽  
Author(s):  
Michelle Chen ◽  
Suraj Rengarajan ◽  
Peter Hey ◽  
Yezdi Dordi ◽  
Hong Zhang ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Room Temperature ◽  
Copper Film ◽  
Copper Films ◽  
Organic Additives ◽  
X Ray Diffraction ◽  
X Ray ◽  
Transmission Electron ◽  
Electroplated Copper ◽  
Effect Of Copper

ABSTRACTSelf-annealing properties of electroplated and sputtered copper films at room temperature were investigated in this study, in particular, the effect of copper film thickness, electrolyte systems used, as well as their level of organic additives for electroplating. Real-time grain growth was observed by transmission electron microscopy. Sheet resistance and X-ray diffraction measurements further confirmed the recrystallization of the electroplated copper film with time. The recrystallization of electroplated films was then compared with that of sputtered copper films.

scholarly journals Influence of different synthesis conditions on properties of oleic acid-coated-Fe3O4 nanoparticles

2015 ◽  
Vol 33 (1) ◽  
pp. 100-106 ◽  
Author(s):  
Atieh Aliakbari ◽  
Majid Seifi ◽  
Sharareh Mirzaee ◽  
Hoda Hekmatara
Keyword(s):  
Oleic Acid ◽  
Room Temperature ◽  
Magnetic Measurement ◽  
Precursor Solution ◽  
Vibrating Sample Magnetometer ◽  
X Ray Diffraction ◽  
X Ray ◽  
Synthesis Conditions ◽  
Transmission Electron ◽  
Ft Ir

AbstractIn the present paper, iron oxide nanoparticles coated by oleic acid have been synthesized in different conditions by coprecipitation method. For investigating the effect of time spent on adding the oleic acid to the precursor solution, two different processes have been considered. The as synthesized samples were characterized by X-ray diffraction (XRD), transmission electron microscopy (TEM) and Fourier transform infrared spectroscopy (FT-IR). Magnetic measurement was carried out at room temperature using a vibrating sample magnetometer (VSM). The results show that the magnetic nanoparticles decorated with oleic acid decreased the saturation of magnetization. From the data, it can also be concluded that the magnetization of Fe3O4/oleic acid nanoparticles depends on synthesis conditions.

Sign in / Sign up

Export Citation Format

Share Document