AERODYNAMIC PERFORMANCE OF AN AXIAL COMPRESSOR WITH A CASING GROOVE COMBINED WITH INJECTION

2013 ◽  
Vol 37 (3) ◽  
pp. 283-292 ◽  
Author(s):  
Dae-Woong Kim ◽  
Jin-Hyuk Kim ◽  
Kwang-Yong Kim
Keyword(s):  
Turbulence Model ◽  
Parametric Study ◽  
Stokes Equations ◽  
Three Dimensional ◽  
Axial Compressor ◽  
Aerodynamic Performance ◽  
Navier Stokes ◽  
Navier Stokes Equations ◽  
Stall Margin ◽  
Transonic Axial Compressor

Aerodynamic performance of a transonic axial compressor with a casing groove combined with injection has been investigated in this work. Three-dimensional Reynolds-averaged Navier–Stokes equations with k-ε turbulence model are discretized by finite volume approximations and solved on hexahedral grids for the flow analyses. For parametric study, the front and rear lengths and height of the casing groove are selected as the geometric parameters and are changed with constant injection to investigate their effects on the stall margin and peak adiabatic efficiency. As a result of the parametric study, the maximum stall margin and peak adiabatic efficiency are found to be obtained in the axial compressor having 70% height of the reference groove. The results show that the application of the casing groove combined with injection to an axial compressor is effective for the simultaneous improvement of both the stall margin and peak adiabatic efficiency of the compressor.

Parametric Study on Aerodynamic Performance of a Transonic Axial Compressor with a Casing Groove and Tip Injection

2013 ◽  
Vol 284-287 ◽  
pp. 872-877 ◽  
Author(s):  
Dae Woong Kim ◽  
Jin Hyuk Kim ◽  
Kwang Yong Kim
Keyword(s):  
Parametric Study ◽  
Stokes Equations ◽  
Pressure Ratio ◽  
Three Dimensional ◽  
Axial Compressor ◽  
Aerodynamic Performance ◽  
Navier Stokes ◽  
Stall Margin ◽  
Transonic Axial Compressor ◽  
Tip Injection

This paper presents a parametric study on aerodynamic performance of a transonic axial compressor combined with a casing groove and tip injection using three-dimensional Reynolds-average Navier-Stokes equations. The front and rear lengths and height of the groove are selected as the geometric parameters to investigate their effects on the stall margin and peak adiabatic efficiency. These parameters are changed with constant injection. The validation of the numerical results is performed in comparison with experimental data for the total pressure ratio and adiabatic efficiency. As the results of the parametric study, the maximum stall margin and peak adiabatic efficiency are obtained in the axial compressor having 70% groove height of the reference groove. The stall margin and peak adiabatic efficiency in other cases are also improved in comparison with the axial compressors with the smooth casing and reference groove. The results show that both the stall margin and the peak adiabatic efficiency are considerably improved by the application of the casing groove combined with tip injection in an axial compressor.

Effects of a Circumferential Feed-Back Channel on Aerodynamic Performance of a Single-Stage Transonic Axial Compressor

2017 ◽  
Author(s):  
Cong-Truong Dinh ◽  
Sang-Bum Ma ◽  
Kwang-Yong Kim
Keyword(s):  
Stokes Equations ◽  
Three Dimensional ◽  
Axial Compressor ◽  
Aerodynamic Performance ◽  
Numerical Results ◽  
Single Stage ◽  
Navier Stokes ◽  
Channel Inlet ◽  
Navier Stokes Equations ◽  
Stall Margin

This paper presents an investigation of a circumferential feed-back channel located on shroud surface in rotor domain to find its effects on aerodynamic performance of a single-stage axial compressor, NASA Stage 37, using three-dimensional Reynolds-averaged Navier-Stokes equations. Validation of numerical results was performed using experimental data for both of single rotor and single-stage compressors. A parametric study of the feed-back channel was performed using various geometric parameters related to the locations and shapes of the channel inlet and outlet. The numerical results showed that a reference circumferential feed-back channel increased the stall margin by 26.8% with 0.14% reduction in the peak adiabatic efficiency, compared to the case without the feed-back channel.

Effects of stator splitter blades on aerodynamic performance of a single-stage transonic axial compressor

2020 ◽  
Vol 14 (4) ◽  
pp. 7369-7378
Author(s):  
Ky-Quang Pham ◽  
Xuan-Truong Le ◽  
Cong-Truong Dinh
Keyword(s):  
Stokes Equations ◽  
Three Dimensional ◽  
Axial Compressor ◽  
Aerodynamic Performance ◽  
Numerical Results ◽  
Single Stage ◽  
Navier Stokes ◽  
Navier Stokes Equations ◽  
Operating Stability ◽  
Length Coverage

Splitter blades located between stator blades in a single-stage axial compressor were proposed and investigated in this work to find their effects on aerodynamic performance and operating stability. Aerodynamic performance of the compressor was evaluated using three-dimensional Reynolds-averaged Navier-Stokes equations using the k-e turbulence model with a scalable wall function. The numerical results for the typical performance parameters without stator splitter blades were validated in comparison with experimental data. The numerical results of a parametric study using four geometric parameters (chord length, coverage angle, height and position) of the stator splitter blades showed that the operational stability of the single-stage axial compressor enhances remarkably using the stator splitter blades. The splitters were effective in suppressing flow separation in the stator domain of the compressor at near-stall condition which affects considerably the aerodynamic performance of the compressor.

scholarly journals Three-Dimensional Turbulent Vortex Shedding From a Surface-Mounted Square Cylinder: Predictions With Large-Eddy Simulations and URANS

2014 ◽  
Vol 136 (6) ◽  
Author(s):  
B. A. Younis ◽  
A. Abrishamchi
Keyword(s):  
Experimental Data ◽  
Turbulence Model ◽  
Stokes Equations ◽  
Three Dimensional ◽  
Large Eddy Simulations ◽  
Navier Stokes ◽  
Reynolds Stresses ◽  
Mean Flow ◽  
Navier Stokes Equations ◽  
Large Eddy

The paper reports on the prediction of the turbulent flow field around a three-dimensional, surface mounted, square-sectioned cylinder at Reynolds numbers in the range 104–105. The effects of turbulence are accounted for in two different ways: by performing large-eddy simulations (LES) with a Smagorinsky model for the subgrid-scale motions and by solving the unsteady form of the Reynolds-averaged Navier–Stokes equations (URANS) together with a turbulence model to determine the resulting Reynolds stresses. The turbulence model used is a two-equation, eddy-viscosity closure that incorporates a term designed to account for the interactions between the organized mean-flow periodicity and the random turbulent motions. Comparisons with experimental data show that the two approaches yield results that are generally comparable and in good accord with the experimental data. The main conclusion of this work is that the URANS approach, which is considerably less demanding in terms of computer resources than LES, can reliably be used for the prediction of unsteady separated flows provided that the effects of organized mean-flow unsteadiness on the turbulence are properly accounted for in the turbulence model.

A Reynolds-Averaged Navier-Stokes Solver in a Turbomachinery Design System

2007 ◽  
Author(s):  
Fahua Gu ◽  
Mark R. Anderson
Keyword(s):  
Turbulence Model ◽  
Stokes Equations ◽  
Three Dimensional ◽  
Integrated Design ◽  
Navier Stokes ◽  
Design System ◽  
Navier Stokes Equations ◽  
Wall Functions ◽  
Machine Performance ◽  
Reynolds Averaged Navier Stokes

The design of turbomachinery has been focusing on the improvement of the machine efficiency and the reduction of the design cost. This paper presents an integrated design system to create the machine geometry and to predict the machine performance at different levels of approximation, including one-dimensional design and analysis, quasi-three-dimensional-(blade-to-blade, throughflow) and full-three-dimensional-steady-state CFD analysis. One of the most important components, the Reynolds-averaged Navier-Stokes solver, is described in detail. It originated from the Dawes solver with numerous enhancements. They include the use of the low speed pre-conditioned full Navier-Stokes equations, the addition of the Spalart-Allmaras turbulence model and an improvement of wall functions related with the turbulence model. The latest upwind scheme, AUSM, has been implemented too. The Dawes code has been rewritten into a multi-block solver for O, C, and H grids. This paper provides some examples to evaluate the effect of grid topology on the machine performance prediction.

scholarly journals Design Optimization of a Dual-Bleeding Recirculation Channel to Enhance Operating Stability of a Transonic Axial Compressor

Energies ◽  
2021 ◽  
Vol 15 (1) ◽  
pp. 159
Author(s):  
Tien-Dung Vuong ◽  
Kwang-Yong Kim
Keyword(s):  
Design Optimization ◽  
Pressure Ratio ◽  
Three Dimensional ◽  
Axial Compressor ◽  
Aerodynamic Performance ◽  
Maximum Pressure ◽  
Stall Margin ◽  
Design Variables ◽  
Operating Stability ◽  
Transonic Axial Compressor

The present work performed a comprehensive investigation to find the effects of a dual-bleeding port recirculation channel on the aerodynamic performance of a single-stage transonic axial compressor, NASA Stage 37, and optimized the channel’s configuration to enhance the operating stability of the compressor. The compressor’s performance was examined using three parameters: The stall margin, adiabatic efficiency, and pressure ratio. Steady-state three-dimensional Reynolds-averaged Navier–Stokes analyses were performed to find the flow field and aerodynamic performance. The results showed that the addition of a bleeding channel increased the recirculation channel’s stabilizing effect compared to the single-bleeding channel. Three design variables were selected for optimization through a parametric study, which was carried out to examine the influences of six geometric parameters on the channel’s effectiveness. Surrogate-based design optimization was performed using the particle swarm optimization algorithm coupled with a surrogate model based on the radial basis neural network. The optimal design was found to increase the stall margin by 51.36% compared to the case without the recirculation channel with only 0.55% and 0.28% reductions in the peak adiabatic efficiency and maximum pressure ratio, respectively.

Parametric Study on Aerodynamic Performance of a Centrifugal Fan With Additionally Installed Splitter Blades

2013 ◽  
Author(s):  
Man-Woong Heo ◽  
Jin-Hyuk Kim ◽  
Kyung-Hun Cha ◽  
Kwang-Yong Kim
Keyword(s):  
Flow Separation ◽  
Stokes Equations ◽  
Flow Analysis ◽  
Three Dimensional ◽  
Aerodynamic Performance ◽  
Navier Stokes ◽  
Centrifugal Fan ◽  
Height Ratio ◽  
Navier Stokes Equations ◽  
Fan Performance

Aerodynamic Performance of a centrifugal fan with additionally installed splitter blades in the impeller has been investigated numerically using three-dimensional Reynolds-averaged Navier-Stokes equations. The shear stress transport turbulence model and hexahedral grids system were used to analyze the flow in the centrifugal fan. From results of the flow analysis, considerable energy loss by flow separation was observed in the blade passages. Splitter blades were applied between the main blades to reduce the loss and enhance fan performance. The chord length ratio of splitter to main blade, the angle between splitter and main blade, and the height ratio of outlet and inlet of impeller were selected as the geometric parameters, and their effects on the aerodynamic performance of the centrifugal fan have been investigated. The performance of the centrifugal fan with added splitter blades was improved conspicuously compared to the centrifugal fan without splitter blades. It was found that the installation of splitter blades in the impeller is effective to improve the aerodynamic performance of a centrifugal fan by reducing the flow separation generated between main blades in the impeller.

Aerodynamic Performances of a Centrifugal Compressor With Discrete Cavities

2017 ◽  
Author(s):  
Sang-Bum Ma ◽  
Kwang-Yong Kim
Keyword(s):  
Centrifugal Compressor ◽  
Stokes Equations ◽  
Pressure Ratio ◽  
Three Dimensional ◽  
Navier Stokes ◽  
Navier Stokes Equations ◽  
Stall Margin ◽  
Tetrahedral Grid ◽  
Aerodynamic Performances ◽  
Inclined Angle

In this study, aerodynamic performance of the centrifugal compressor was investigated by using a recirculating device called discrete cavities. A parametric study was conducted using six parameters related to the geometry of the discrete cavities, i.e., the inclined angle, the port angle and width, the length of cavity, the axial location of each cavity, and the number of cavities. Three-dimensional Reynolds-averaged Navier-Stokes equations with shear stress transport turbulence model were used for aerodynamic analysis of the centrifugal compressor with discrete cavities. The hexahedral grid was used in impeller domain and tetrahedral grid was used in volute and inclined discrete cavities. The numerical results for the adiabatic efficiency and the total pressure ratio (inlet to outlet) showed good agreements with experimental data. It was found that inclination of the discrete cavities further increased the stall margin without loss of efficiency compared to the uninclined discrete cavities.

scholarly journals Stability Enhancement of a Single-Stage Transonic Axial Compressor Using Inclined Oblique Slots

Energies ◽  
2021 ◽  
Vol 14 (9) ◽  
pp. 2346
Author(s):  
Tien-Dung Vuong ◽  
Kwang-Yong Kim
Keyword(s):  
Pressure Ratio ◽  
Three Dimensional ◽  
Axial Compressor ◽  
Single Stage ◽  
Rotor Blades ◽  
Navier Stokes ◽  
Optimized Design ◽  
Stall Margin ◽  
Casing Treatment ◽  
Transonic Axial Compressor

A casing treatment using inclined oblique slots (INOS) is proposed to improve the stability of the single-stage transonic axial compressor, NASA Stage 37, during operation. The slots are installed on the casing of the rotor blades. The aerodynamic performance was estimated using three-dimensional steady Reynolds-Averaged Navier-Stokes analysis. The results showed that the slots effectively increased the stall margin of the compressor with slight reductions in the pressure ratio and adiabatic efficiency. Three geometric parameters were tested in a parametric study. A single-objective optimization to maximize the stall margin was carried out using a Genetic Algorithm coupled with a surrogate model created by a radial basis neural network. The optimized design increased the stall margin by 37.1% compared to that of the smooth casing with little impacts on the efficiency and pressure ratio.

Discontinuous Galerkin Solution of Three-Dimensional Reynolds-Averaged Navier-Stokes Equations With S-A Turbulence Model

2010 ◽  
Author(s):  
Fan Feng ◽  
Chunwei Gu ◽  
Xuesong Li
Keyword(s):  
Discontinuous Galerkin ◽  
Turbulence Model ◽  
Stokes Equations ◽  
Mach Reflection ◽  
Three Dimensional ◽  
Navier Stokes ◽  
Compressor Cascade ◽  
Navier Stokes Equations ◽  
Reynolds Averaged Navier Stokes ◽  
Double Mach Reflection

In this paper Discontinuous Galerkin Method (DGM) is applied to solve the Reynolds-averaged Navier-Stokes equations and S-A turbulence model equation in curvilinear coordinate system. Different schemes, including Lax-Friedrichs (LF) flux, Harten, Lax and van Leer (HLL) flux and Roe flux are adopted as numerical flux of inviscid terms at the element interface. The gradients of conservative variables in viscous terms are constructed by mixed formulation, which solves the gradients as auxiliary unknowns to the same order of accuracy as conservative variables. The methodology is validated by simulations of double Mach reflection problem and three-dimensional turbulent flowfield within compressor cascade NACA64. The numerical results agree well with the experimental data.

Sign in / Sign up

Export Citation Format

Share Document