EXPERIMENTAL STUDY OF THE CURRENT NOISE SPECTRAL DENSITY VERSUS DARK CURRENT IN CdTe: Cl AND CdZnTe DETECTORS

Author(s):  
Asaad Imad ◽  
Bernard Orsal ◽  
Robert Alabedra ◽  
Marc Arques ◽  
Guillaume Montémont ◽  
...  
Author(s):  
Asaad Imad ◽  
Bernard Orsal ◽  
Robert Alabedra ◽  
Marc Arques ◽  
Guillaume Montémont ◽  
...  

2017 ◽  
Vol 12 (2) ◽  
pp. 62-70
Author(s):  
Rafael Assalti ◽  
Rodrigo T. Doria ◽  
Denis Flandre ◽  
Michelly De Souza

In this paper the origin of low-frequency noise in the Asymmetric Self-Cascode (A-SC) structure composed by Fully Depleted SOI nMOSFETs is investigated through experimental results. It is shown that the predominant noise source of the A-SC structure is linked to carrier number fluctuations, being governed by the noise generated in the transistor near the source. Larger channel doping concentrations degrade the quality of the Si-SiO2 interface and the gate oxide, which causes an increase of the normalized drain current noise spectral density, just as the reduction of the gate voltage overdrive, since there are few carriers in the channel. The A-SC structures have showed higher noise compared with single transistors. In saturation regime, the increase of the gate voltage overdrive has incremented the corner frequency, shifting the g-r noise to higher frequencies. Besides that, the normalized noise has been significantly increased when compared with the linear regime due to the rise of the drain current noise spectral density.


2021 ◽  
Vol 12 (1) ◽  
Author(s):  
Jonas Kublitski ◽  
Andreas Hofacker ◽  
Bahman K. Boroujeni ◽  
Johannes Benduhn ◽  
Vasileios C. Nikolis ◽  
...  

AbstractOrganic photodetectors have promising applications in low-cost imaging, health monitoring and near-infrared sensing. Recent research on organic photodetectors based on donor–acceptor systems has resulted in narrow-band, flexible and biocompatible devices, of which the best reach external photovoltaic quantum efficiencies approaching 100%. However, the high noise spectral density of these devices limits their specific detectivity to around 1013 Jones in the visible and several orders of magnitude lower in the near-infrared, severely reducing performance. Here, we show that the shot noise, proportional to the dark current, dominates the noise spectral density, demanding a comprehensive understanding of the dark current. We demonstrate that, in addition to the intrinsic saturation current generated via charge-transfer states, dark current contains a major contribution from trap-assisted generated charges and decreases systematically with decreasing concentration of traps. By modeling the dark current of several donor–acceptor systems, we reveal the interplay between traps and charge-transfer states as source of dark current and show that traps dominate the generation processes, thus being the main limiting factor of organic photodetectors detectivity.


2013 ◽  
Vol 4 ◽  
pp. 32-44 ◽  
Author(s):  
Jannis Lübbe ◽  
Matthias Temmen ◽  
Sebastian Rode ◽  
Philipp Rahe ◽  
Angelika Kühnle ◽  
...  

The noise of the frequency-shift signal Δf in noncontact atomic force microscopy (NC-AFM) consists of cantilever thermal noise, tip–surface-interaction noise and instrumental noise from the detection and signal processing systems. We investigate how the displacement-noise spectral density d z at the input of the frequency demodulator propagates to the frequency-shift-noise spectral density d Δ f at the demodulator output in dependence of cantilever properties and settings of the signal processing electronics in the limit of a negligible tip–surface interaction and a measurement under ultrahigh-vacuum conditions. For a quantification of the noise figures, we calibrate the cantilever displacement signal and determine the transfer function of the signal-processing electronics. From the transfer function and the measured d z , we predict d Δ f for specific filter settings, a given level of detection-system noise spectral density d z ds and the cantilever-thermal-noise spectral density d z th. We find an excellent agreement between the calculated and measured values for d Δ f . Furthermore, we demonstrate that thermal noise in d Δ f , defining the ultimate limit in NC-AFM signal detection, can be kept low by a proper choice of the cantilever whereby its Q-factor should be given most attention. A system with a low-noise signal detection and a suitable cantilever, operated with appropriate filter and feedback-loop settings allows room temperature NC-AFM measurements at a low thermal-noise limit with a significant bandwidth.


2006 ◽  
Vol 203 (11) ◽  
pp. 2944-2949
Author(s):  
A. Taoufik ◽  
M. Bghour ◽  
A. Labrag ◽  
A. Bouaaddi ◽  
A. Abaragh ◽  
...  

2001 ◽  
Vol 35 (3) ◽  
pp. 338-342 ◽  
Author(s):  
O. K. Baranovskii ◽  
P. V. Kuchinskii ◽  
V. M. Lutkovskii ◽  
A. P. Petrunin ◽  
E. D. Savenok

Sign in / Sign up

Export Citation Format

Share Document